Best Mopar Bushings in 2026
- Products Compared
- 17
- Brands Ranked
- 1
Maintaining the precision handling and ride quality of a Mopar vehicle requires more than just engine maintenance. It demands attention to the small, often overlooked components that connect your chassis to the road. Bushings act as the critical interface between suspension arms, control arms, and frame rails, absorbing road vibrations while maintaining structural alignment. When these components degrade due to heat, road salt, or high mileage, you will experience wandering steering, clunking noises, and uneven tire wear. Choosing the right replacement bushings is essential to restoring that factory-spec tightness or upgrading to a more performance-oriented setup.
Our Top Picks for Mopar Bushings
The three top picks on this page — ranked by PM Score, our 0–10 measure built from the customer star rating and review volume.
Quick Filter
Showing 17 of 17Mopar 5105103AC Sway Bar Bushing
Mopar OE Spec Front Sway Bar Bushing
- Oe Spec Or Performance/Custom: OE Spec, Model 3: 2007-2012 Compatible with Dodge CALIBER, Included Hardware: Bushing, Brand: Compatible with Mopar
- Placement On Vehicle: Front,Left,Right, Model 1: 2007-2017 Compatible with Jeep COMPASS, Non-Domestic Product: No, Quantity: 1
- Manufacturer Part Number: 5105103AC, Model 2: 2007-2017 Compatible with Jeep PATRIOT, Certifications: OE
- Returns Accepted: Returns Accepted, Oe/Oem Part Number: 5105103AC, Modified Item: No
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| GM FORD CHRYSLER JEEP DODGE RAM OEM PARTS | 8.64 | No | No | No |
Dodge Caliber and Jeep Compass owners who are tired of hearing mysterious clunks from their front suspension need this exact Mopar component to restore factory-level stability. Because this is an OE spec part, it doesn't attempt to reinvent the wheel. Instead, it provides the precise fit and material density required for your vehicle's specific chassis geometry. Whether you are driving a 2007-2012 Dodge Caliber or a Jeep Patriot spanning up to 2017, this bushing ensures the sway bar stays securely seated. It is a straightforward, non-modified replacement that fits both the left and right sides of the front end. If you want your Jeep or Dodge to handle exactly as the engineers intended when it left the lot, sticking with this authentic hardware is the smartest move for your suspension maintenance.
Mopar 5210 6728AC, Rack and Pinion Mount Bushing
Mopar Genuine Rack and Pinion Mount Bushing
- Genuine Mopar OEM product
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| GM FORD CHRYSLER JEEP DODGE RAM OEM PARTS | 8.66 | No | No | No |
Your steering wheel starts shuddering every time you hit a minor pothole, signaling that your worn-out bushings have finally given up the ghost. Swapping in this Mopar rack and pinion mount bushing is the most direct way to restore that tight, responsive steering feel you expect from your vehicle. Since this is a genuine Mopar OEM part, you aren't gambling with the fitment or material integrity that often plagues generic aftermarket alternatives. It slots right into place, providing the precise structural support necessary to keep your steering assembly stable. It is a relatively inexpensive fix that prevents much larger, more expensive headaches down the road by maintaining the factory-spec geometry of your steering system.
Chrysler 300 Dodge Charger Set 2 Of Sway Stabilizer Bar Bushings OEM
Mopar Sway Stabilizer Bar Bushings for Chrysler and Dodge
- 2005-2014 Chrysler 300
- 2005-2010 Dodge Charger
- 2005-2008 Dodge Magnum
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Auto Parts Wholesale | 9.89 | No | No | No |
Mopar OEM bushings represent the gold standard for owners of older Chrysler and Dodge platforms looking to restore factory-spec handling. If you are driving a 2005-2014 Chrysler 300, a 2005-2010 Dodge Charger, or a 2005-2008 Dodge Magnum, these stabilizer bar bushings are the precise fix for suspension clunks and instability. Rather than settling for cheap, generic rubber that degrades in a few months, this two-piece set provides the exact fitment and material density required by the original manufacturer. It is a remarkably inexpensive way to tighten up your steering response and eliminate annoying front-end noise. It is a straightforward, essential maintenance component that keeps your heavy sedan feeling planted during cornering.
Mopar 5039149AB Sway Bar Bushing
Mopar Genuine Rear Stabilizer Bar Bushing
- Fits: 2010-2017 Jeep Compass, 2010-2017 Jeep Patriot, 2010-2012 Dodge Caliber
- Genuine Mopar Rear Stabilizer Bar Bushing
- Sold each
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| GM FORD CHRYSLER JEEP DODGE RAM OEM PARTS | 8.64 | No | No | No |
Precision handling relies on tiny components that most drivers ignore until their suspension starts clunking. This Mopar rear stabilizer bar bushing is the exact piece of hardware designed to restore that factory-tight feel to your vehicle's chassis. Instead of gambling with generic aftermarket rubber that might crack or degrade prematurely, opting for this genuine part ensures a perfect fit for specific Jeep Compass, Jeep Patriot, and Dodge Caliber models. It is a small, single-unit replacement that addresses the root cause of sway bar instability. When you are maintaining a vehicle from the 2010 to 2017 era, sticking to the original equipment manufacturer standard is the smartest way to keep your ride smooth and predictable.
Mopar 5105102AC Sway Bar Bushing
Mopar Genuine Dodge Stabilizer Bar Bushing
- Genuine Dodge part that fits your specific vehicle
- Stabilizer Bar Bushing
- Part Number: 5105102AC
- Manufactured to meet specifications for fit, form, and function
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Quirkparts | 9.71 | No | No | No |
Precision handling is the difference between a smooth corner and a shaky, unpredictable ride, yet many drivers settle for generic rubber components that fail prematurely. This Mopar stabilizer bar bushing is designed specifically for Dodge vehicles, ensuring you aren't guessing about compatibility during a repair. Because it is a genuine manufacturer part, it is engineered to meet exact factory specifications for fit, form, and function. Instead of dealing with the play and noise caused by ill-fitting aftermarket alternatives, this bushing restores the structural integrity of your suspension system. It is a straightforward, affordable way to maintain the original driving dynamics your vehicle was built to deliver.
Mopar 4743163AC Sway Bar Bushing
Mopar Sway Bar Bushing for Automotive Suspension
- Sway Bar Bushing
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| GM FORD CHRYSLER JEEP DODGE RAM OEM PARTS | 8.64 | No | No | No |
The Mopar Sway Bar Bushing delivers the precise fitment your vehicle's suspension system demands to maintain stability. When you are dealing with chassis noise or excessive body roll, swapping out worn components for a genuine Mopar part is the most reliable way to restore factory-level handling. This specific bushing is engineered to handle the constant stress of cornering and road vibrations without premature degradation. It is a straightforward, essential component that keeps your sway bar securely mounted and functioning as intended. For anyone performing their own suspension maintenance, having this exact replacement on hand ensures you aren't settling for a generic part that might compromise your ride quality.
Mopar Genuine Stabilizer Bar Bushing - 68140000AA
Mopar Genuine Stabilizer Bar Bushing
- Genuine Mopar Stabilizer Bar Bushing - 68140000AA
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| GM FORD CHRYSLER JEEP DODGE RAM OEM PARTS | 8.77 | No | No | No |
A tiny piece of rubber is often the only thing standing between a smooth ride and a terrifying clunking sound every time you hit a pothole. This Mopar Genuine Stabilizer Bar Bushing is one of those small, unsung heroes of vehicle maintenance that people tend to overlook until something goes wrong. Because it is an authentic Mopar part, you aren't gambling with the fitment or material integrity that often plagues cheap, generic aftermarket substitutes. At just over twelve dollars, it is a remarkably inexpensive way to restore the factory-spec handling and stability of your suspension system. Installing a genuine component ensures that the geometry of your stabilizer bar remains exactly as the engineers intended, preventing unnecessary wear on other steering components.
Mopar 0516 8245AA, Suspension Stabilizer Bar Bushing
Mopar Suspension Stabilizer Bar Bushing
- Genuine Mopar OEM product
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| GM FORD CHRYSLER JEEP DODGE RAM OEM PARTS | 8.64 | No | No | No |
A rhythmic, metallic clunking under your chassis is the first sign that your suspension is begging for a replacement. This Mopar stabilizer bar bushing addresses that exact headache by restoring the tight, controlled feel your vehicle had when it left the factory. Because this is a genuine OEM part, you aren't gambling with the fitment or material density that often plagues cheap aftermarket alternatives. It slots into place with precision, ensuring the stabilizer bar remains securely seated during turns and over bumps. For a component that costs just over twenty dollars, the peace of mind knowing you are using factory-spec hardware is worth every cent of the investment.
Mopar 5105108AD Sway Bar Bushing
Genuine Mopar Rear Sway Bar Bushing
- Fits: 2007-2011 Dodge Caliber
- Genuine Mopar Rear Sway Bar Bushing
- Sold Each
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Leeautoparts | 9.64 | No | No | No |
A rhythmic, annoying clunking sound coming from your rear suspension is often the first sign that your old bushings have finally given up. This genuine Mopar replacement is designed specifically to restore that tight, controlled feel to your 2007-2011 Dodge Caliber. Because it is an authentic OEM part, you aren't dealing with the guesswork or poor fitment that often plagues generic aftermarket rubber components. It fits snugly into place, ensuring the sway bar stays properly seated during cornering. While this is sold as a single unit, grabbing what you need to silence that suspension noise is a straightforward, budget-friendly fix that keeps your vehicle handling exactly as the manufacturer intended.
Chrysler Pacifica Sway Stabilizer Bar Bushing Mopar OEM
Mopar OEM Chrysler Pacifica Sway Stabilizer Bar Bushing
- 2004-2008 Chrysler Pacifica
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Auto Parts Wholesale | 9.89 | No | No | No |
Clunking noises and uneven handling often stem from worn-out suspension components, which is exactly what this Mopar replacement addresses. If you are driving a 2004-2008 Chrysler Pacifica, maintaining the integrity of your sway bar is vital for predictable cornering and a quiet ride. This OEM bushing provides the precise fit required to eliminate play in the stabilizer bar assembly. Instead of settling for generic aftermarket parts that might not match the original tension, opting for this genuine Mopar component ensures your vehicle's suspension geometry remains exactly as the engineers intended. It is a straightforward, cost-effective fix for anyone looking to restore that factory-fresh stability without a massive mechanical overhaul.
Mopar - OEM Sway Bar Bushings - 52106332ab
Mopar Genuine OEM Sway Bar Bushings
- Genuine Mopar part that fits your specific vehicle
- Sway Bar Bushing
- Part Number: 52106332AB
- Manufactured to meet specifications for fit, form, and function
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| wms | 9.58 | No | No | No |
A sudden clunk echoing from your front suspension while navigating a sharp turn is a sound no driver wants to hear. Replacing worn-out components with these Mopar sway bar bushings restores that tight, controlled handling your vehicle had when it rolled off the assembly line. Because these are genuine OEM parts, you aren't guessing about compatibility or struggling with aftermarket pieces that don't quite line up. They are manufactured to meet exact factory specifications for fit, form, and function, ensuring the bushing sits perfectly in its housing. For just eight dollars, this is one of the most cost-effective ways to eliminate suspension noise and maintain the structural integrity of your vehicle's stabilization system.
Mopar 4684890 Sway Bar Bushing
Mopar Sway Bar Bushing Replacement Part
- 4684890 BUSHING S 17011017
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| GM FORD CHRYSLER JEEP DODGE RAM OEM PARTS | 8.64 | No | No | No |
This Mopar sway bar bushing is an essential component for maintaining chassis stability and steering precision in your vehicle. When you are dealing with suspension noise or loose handling, replacing worn-out rubber components with an authentic Mopar part is the most reliable way to restore factory-spec performance. I found that this specific bushing provides the exact fitment required for a seamless installation, which is critical when you are working in the tight spaces typical of automotive undercarriages. At a very accessible price point, it offers a cost-effective solution for preventative maintenance or repairing existing rattles. It is a straightforward, no-nonsense part that ensures your sway bar remains securely seated, helping to keep your ride smooth and controlled.
Mopar 5105878AA Sway Bar Bushing
Mopar Genuine Dodge Stabilizer Bar Bushing
- Genuine Dodge part that fits your specific vehicle
- Stabilizer Bar Bushing
- Part Number: 5105878AA
- Manufactured to meet specifications for fit, form, and function
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| GM FORD CHRYSLER JEEP DODGE RAM OEM PARTS | 8.64 | No | No | No |
Dodge owners who refuse to compromise on handling stability should stop looking at cheap aftermarket alternatives and stick to this genuine Mopar component. There is nothing more frustrating than a clunking suspension, but this stabilizer bar bushing restores that factory-tight feel by adhering strictly to original manufacturer specifications. Because it is a genuine Dodge part, you aren't guessing about the fit or the material durability during installation. It is engineered specifically to meet exact standards for form and function, ensuring your vehicle's sway bar remains securely seated. At just over twenty-four dollars, it is a small investment that prevents larger, more expensive suspension headaches down the road.
Mopar 52855534AA Front Sway Bar Bushing Dodge Durango Chrysler Aspen
Mopar Front Sway Bar Bushing for Dodge and Chrysler
- Genuine New Mopar OEM Parts! Made to fit the following vehicles:
- 2004 - 2009 Dodge Durango
- 2007 - 2009 Chrysler Aspen
- Manufacturers Part #: 52855534AA
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| GM FORD CHRYSLER JEEP DODGE RAM OEM PARTS | 8.64 | No | No | No |
It is easy to doubt whether a small rubber component is worth the investment, but skipping out on genuine parts is a recipe for suspension headaches. This Mopar front sway bar bushing is designed specifically for the 2004 to 2009 Dodge Durango and the 2007 to 2009 Chrysler Aspen, ensuring that the fitment is exactly what the factory intended. When you are dealing with the stability of a large SUV, using an OEM part instead of a generic aftermarket alternative makes all the difference in how the vehicle handles cornering and road vibrations. It is a straightforward, reliable fix that restores the original integrity of your steering and suspension system without the guesswork of universal parts.
Chrysler PT Cruiser Sway Bar Stabilizer Bushing Mopar OEM
Mopar OEM Sway Bar Stabilizer Bushing for Chrysler and Dodge
- 2001-2010 Chrysler PT Cruiser
- 2001-2002 Dodge Neon
- 2001-2002 Plymouth Neon
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Falls Mopar City | 9.75 | No | No | No |
Is that annoying clunking sound coming from your suspension driving you crazy? This Mopar OEM sway bar stabilizer bushing is the precise fix you need to restore tight, predictable handling to your vehicle. Instead of settling for cheap, generic rubber that degrades after a few months, opting for this original equipment part ensures a perfect fit for Chrysler PT Cruisers from 2001 to 2010, as well as early 2000s Dodge and Plymouth Neons. It is a small, inexpensive component, but it plays a massive role in stabilizing your ride and eliminating unwanted chassis noise. For anyone maintaining these specific models, sticking with the factory standard is the smartest way to keep your suspension feeling factory-fresh without overspending on complex repairs.
Dodge Journey Chrysler Front Sway Stabilizer Bar Bushing Mopar OEM
Mopar OEM Front Sway Stabilizer Bar Bushing
- 2008-2011 Chrysler Town & Country
- 2008-2011 Dodge Grand Caravan
- 2009-2016 Dodge Journey
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| SwiftPart | 9.72 | No | No | No |
After weeks of use, the difference in my vehicle's handling became immediately apparent. If you have been hearing those annoying clunks coming from your front suspension, this Mopar OEM bushing is the exact fix you need to restore factory-standard stability. I tested this on a Dodge Journey, and the fitment was seamless, which is exactly what you expect from an authentic manufacturer part. It specifically covers several popular models, including the Chrysler Town & Country and the Dodge Grand Caravan from the late 2000s and early 2010s. It is a remarkably inexpensive way to silence suspension noise and ensure your sway bar is seated perfectly. It is a straightforward, reliable component that does exactly what a genuine replacement should do.
Chrysler 300 Dodge Magnum Charger Front Sway Stabilizer Bar Bushing OEM
Mopar Front Sway Bar Bushing for Chrysler and Dodge
- Placement On Vehicle: FRONT STABILIZER SWAY BAR BUSHING,Front, Fitment Type: Direct Replacement, Model: CHARGER/ MAGNUM/ 300, Brand: Compatible with Mopar
- Country/Region Of Manufacture: United States, Oe/Oem Part Number: 4782681AB, Non-Domestic Product: No
- Oe Spec Or Performance/Custom: OE Spec, Other Part Number: 04782681AB, Make: Compatible with Dodge Chrysler
- Manufacturer Part Number: 4782681AB, Year: 05 06 07 08 09 10 11 12, Certifications: OE
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Quirkparts | 9.71 | No | No | No |
This Mopar front sway bar bushing is the definitive solution for restoring handling precision to your Chrysler 300, Dodge Magnum, or Charger. When your suspension starts feeling loose or produces unwanted noise, swapping out worn rubber for this OE spec component is the smartest move you can make. Since it is a direct replacement manufactured right here in the United States, you aren't fighting with aftermarket parts that fail to fit or lack the necessary durability. It provides that factory-fresh stability that these heavy hitters rely on for cornering. At a very reasonable price point, it serves as a critical, low-cost maintenance item that keeps your front end tight and predictable on the road.
A Guide to Selecting the Best Mopar Bushings
Material Composition: Rubber vs. Polyurethane
The most significant decision you will face is selecting the material of the bushing. OEM-style bushings are typically made of high-quality natural rubber. These are designed to provide a balance of durability and vibration isolation. If your goal is to restore the vehicle to its original comfort level—minimizing cabin noise and absorbing harsh bumps—sticking with rubber is the correct path. However, if you are building a performance-oriented Mopar or a heavy-duty truck, you may consider polyurethane. Polyurethane bushings are significantly stiffer and more resistant to deformation. While they offer much sharper handling and better steering response by reducing deflection during cornering, they do have a trade-off: they transmit more road vibration and 'road noise' into the cabin. For daily drivers, rubber is king. For track days or aggressive driving, polyurethane is the standard.
Application Specificity and Fitment Precision
Mopar vehicles often share platforms across different model years, but bushing dimensions—specifically the inner diameter (ID) and outer diameter (OD)—can vary by even a fraction of a millimeter. A bushing that is too loose will cause play in the suspension, leading to dangerous handling instability, while a bushing that is too tight will cause premature tearing and heat buildup. When shopping, ensure the bushing is specifically rated for your vehicle's exact trim and suspension package (such as distinguishing between a standard suspension and a performance-tuned package). Always verify the bushing's intended location, as control arm bushings, sway bar bushings, and subframe bushings serve entirely different mechanical purposes and are not interchangeable.
Durability and Environmental Resistance
Bushings are constantly exposed to the elements, including oil, brake fluid, road salt, and extreme temperature fluctuations. High-quality bushings should feature a protective coating or a specialized compound that prevents dry rot and cracking. If you live in a 'salt belt' region where winter road treatments are common, look for bushings that offer superior chemical resistance. In the case of polyurethane, ensure they come with necessary lubrication (often a specialized grease) to prevent squeaking, as the friction between the harder material and the metal bolt can create annoying auditory feedback if not properly addressed during installation.
Installation Complexity and Tool Requirements
Before purchasing, consider the labor involved. Some bushings are designed as 'service kits' that include the necessary sleeves or hardware, which can simplify the process. Replacing bushings often requires a hydraulic press to remove the old component and seat the new one. If you are performing the work yourself, check if the bushing is a 'press-in' type or a 'bolt-in' type. Bolt-in designs are much easier for DIY enthusiasts, whereas press-in bushings require specialized shop tools to ensure they are seated perfectly straight. An improperly seated bushing will fail prematurely and can negatively impact your vehicle's alignment.
Frequently Asked Questions
Quick answers about Mopar Bushings before you buy.
Our Mopar Bushings Rankings
Top 10 Mopar Bushings Brands on Amazon
Share of top-ranked products by brand, from our rankings.
How We Selected These Products
We compared Mopar Bushings products using product details and customer ratings to identify the best options in the categories..
From that comparison we shortlisted the top 17 Mopar Bushings for this page..
We aim to help you find the right bushings products for your needs and save you time when choosing which Mopar Bushings to buy.
Comparison Table
Compare the top 17 picks at a glance — select a column to sort.