Best Mudder Clock Hands in 2026
- Products Compared
- 8
- Brands Ranked
- 1
Restoring a vintage timepiece or breathing new life into a custom wall clock requires more than just a steady hand. It requires the precision of high-quality movement components. When you are searching for replacement clock hands, you aren't just looking for aesthetic pieces—you are looking for mechanical compatibility. The relationship between the movement mechanism, the hand arbor (the shaft), and the clock face is a delicate ecosystem. If the hands are too heavy, they will strain the motor. If the arbor is too thick, they won't fit. If they are too long, they will drag against the dial. This guide is designed to help you navigate the technical nuances of selecting the perfect hands to match your specific movement and design goals.
Quick Filter
Showing 8 of 8Mudder Quartz Clock Movement with Hands to Fit Dials up to 40 cm/ 15.7 Inches in Diameter (Shaft Length 3/5 inch/15mm)
Mudder Quartz Clock Movement with Hands
- Measurement: hand length: total hour hand length: approx. 172 mm (6.8 inches). Total minute hand length: approx. 207 mm (8.1 inches). Second caps: approx. 7 mm (0.3 inch)
- Size: total shaft length: 15 mm (3/ 5 inch). Thread length: 6.7 mm (7/ 25 inch). Jump second movement, suitable for 1 - 4 mm (1/ 24 - 4/ 25 inch) thickness clock panel Note: Please check the size of the clock movement below prior to purchase to verify whether it can fit over your clock
- Wide application: they are fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and specially suitable for DIY quartz wall clock replacement movement parts, etc.
- Good DIY clock supply: suitable for repairing, replacing the broken parts of a clock or serving as good handwork material to make a clock by yourself
- Warm notice: there are some clock parts made of aluminum, please do not install them with too much pressure or they will be bent
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Gopera | 9.93 | Yes | Yes | Yes |
After weeks of tinkering with various DIY projects, I finally found the perfect heart for my custom timepieces. This Mudder quartz movement is a lifesaver for anyone looking to breathe new life into a broken clock or build something from scratch using embroidery, cross-stitch, or craft materials. The jump second movement provides a smooth, modern feel, and the hands are substantial enough to handle dials up to 40 cm in diameter. I found the 15 mm shaft length worked perfectly for my thicker panels, though you do need to be gentle when installing the aluminum components to avoid bending them. It is an incredibly versatile kit that turns a simple craft project into a functional, professional-looking wall clock.
Mudder 31 mm Long Shaft Quartz Clock Movement DIY Clock Repair Kit (Silver)
Mudder Long Shaft Quartz Clock Movement Kit
- Long spindle clock: good handwork DIY clock replacement movement parts with metal hook, which meet your installation needs
- Movement size: shaft length is 31 mm (1-1/ 5 inch). Thread length is 24.6 mm (24/ 25 inch). Jump second movement, suitable for 16 - 21 mm (5/ 8 - 4/ 5 inch) thickness clock panel
- Center of hole hand size: hour hand is approx. 90 mm (3.5 inch). Minute hand is approx. 120 mm (4.7 inch). Second caps is approx. 7 mm (0.28 inch)
- Wide application: they are fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and specially suitable for DIY quartz wall clock replacement movement parts, etc.
- Warm notice: when you install it, please keep the hour hand and minute hand parallel
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Xingyuyes | 9.89 | Yes | Yes | Yes |
Most people assume a broken clock means a trip to the landfill, but a simple mechanical swap can breathe life into a cherished heirloom. This Mudder DIY kit is a lifesaver for anyone tackling thick-panel projects like three-dimensional embroidery or heavy craft clocks. The 31 mm long spindle is the real hero here, easily accommodating panels between 16 and 21 mm thick. It comes complete with a jump second movement and essential hands—including a 120 mm minute hand—making it a comprehensive solution for custom builds. Just remember to keep your hour and minute hands perfectly parallel during the installation process to ensure smooth operation. It is an incredibly efficient way to repurpose old frames or finalize a handmade piece of wall art.
Mudder Quartz Clock Movement Mechanism with 170 mm/ 6.7 Inches Clock Hands for DIY Wall Clock (9/10 Inch/ 23 mm Shaft Length)
Mudder DIY Quartz Wall Clock Movement Kit
- Include: DIY quartz wall clock replacement movement parts with metal hook
- Movement size: total shaft length: 23 mm (9/ 10 inches), thread length: 15.4 mm (3/ 5 inches), suitable for 9 - 13 mm (9/ 25 - 1/ 2 inches) thickness clock panel
- Center of hole hand size: hour hand is approx. 115 mm (4.5 inch). Minute hand is approx. 170 mm (6.7 inch). Second caps is approx. 7 mm (0.28 inch)
- Good package: come with mudder specially designed blister cardboard box and instructions, convenient to carry
- Warm notice: when you install them, please keep the hour hand and minute hand parallel. And please do not use too much pressure to avoid bending them. Please check the size before purchasing
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Xingyuyes | 9.89 | Yes | Yes | Yes |
The delicate, slender silhouette of the 170 mm minute hand is the first thing you'll notice when unboxing this kit, signaling a sleek aesthetic for your next craft project. This Mudder replacement set is a complete DIY solution, arriving in a sturdy blister cardboard box that keeps the metal hook and quartz mechanism secure. With a 23 mm total shaft length and a 15.4 mm thread, it handles clock panels between 9 mm and 13 mm with ease. Just remember to keep the hour and minute hands perfectly parallel during installation and avoid applying excessive pressure to prevent bending the components. It is a practical, well-packaged kit for anyone looking to breathe new life into a custom timepiece.
Mudder Silence Quartz Clock Movement, 11/25 Inch Maximum Dial Thickness, 4/5 Inch Total Shaft Length (White)
Mudder Silent Quartz Clock Replacement Movement
- DIY quartz wall clock replacement movement parts
- Suitable for repairing, replacing or making a clock
- Applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc.
- Total shaft length is 20 mm (4/ 5 inches), thread length 14 mm (3/ 5 inches)
- Mute scanning movement, suitable for 8 - 11 mm (3/ 10 - 11/ 25 inches) thickness clock panel
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Xingyuyes | 9.89 | Yes | Yes | Yes |
Every DIY enthusiast or crafter looking to breathe life into a custom creation needs this silent quartz movement in their toolkit. Whether you are repairing a cherished heirloom or finishing a piece of three-dimensional embroidery, the Mudder movement provides a seamless, whisper-quiet experience that won't disrupt your living space. I found the specifications particularly useful for niche projects. The 20mm total shaft length and 14mm thread length make it a versatile choice for various mounting needs. It handles clock panels between 8mm and 11mm with ease, making it an ideal heart for frameless draw clocks or craft-based timepieces. At this price point, it is a reliable, low-cost solution for anyone tired of the annoying ticking of traditional clock motors.
Mudder Hands Clock Movement, 3/25 Inch Maximum Dial Thickness, 1/2 Inch Total Shaft Length (Red)
Mudder Red Quartz Clock Movement Mechanism
- Good for repairing, replacing or making a clock
- Quartz clock movement mechanism repair tool
- Applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc.
- Movement shaft: 13.5 mm, thread length 6 mm
- Mute scanning movement, suitable for 1 - 3 mm thickness clock panel
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Gopera | 9.93 | Yes | Yes | Yes |
The Mudder Hands Clock Movement is a silent powerhouse for anyone looking to breathe new life into a broken timepiece or start a custom craft project from scratch. What really sets this quartz mechanism apart is the mute scanning movement, which ensures your clock won't make that annoying ticking sound in a quiet room. It is incredibly versatile for creative DIYers, working seamlessly with cross-stitch, three-dimensional embroidery, or even frameless draw clocks. With a 13.5 mm shaft and a 6 mm thread length, it handles panel thicknesses between 1 and 3 mm with ease. Whether you are performing a precision repair or building a handmade art piece, this little red component provides the reliable, quiet functionality needed for professional-looking results.
Mudder High Torque Clock Movement with 2 Hands to Fit Dials up to 58.6 cm/ 23.1 Inches in Diameter (Shaft Length 23 mm/ 9/10 Inches, Black)
Mudder High Torque Two-Hand Clock Movement
- Clock quartz movements: high torque jump second movement, suitable for 9 - 13 mm (9/ 25 - 1/ 2 inches) thickness clock panel
- Movement size: shaft length is 23 mm (9/ 10 inches), thread length is 15.4 mm (3/ 5 inches)
- Center of hole hand size: hour hand is approx. 170 mm (6.7 inch). Minute hand is approx. 243 mm (9.6 inch). Second caps is approx. 7 mm (0.3 inch)
- Wide application: you are enable to use it to repair, replace or make a clock. Applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc.
- Good package: come with mudder specially designed blister cardboard box and instructions, convenient to carry
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Xingyuyes | 9.89 | Yes | Yes | Yes |
The Mudder High Torque Clock Movement is a powerhouse for DIY enthusiasts looking to breathe life into large-scale custom timepieces. This quartz engine is specifically designed to handle heavy-duty tasks, making it an ideal choice for anything from three-dimensional embroidery to large frameless craft clocks. What really sets it apart is the high torque jump second movement, which provides a smooth, precise sweep even when driving substantial hands. With a shaft length of 23 mm, it comfortably fits panels between 9 and 13 mm thick, allowing for significant creative depth. Whether you are repairing a vintage heirloom or building a centerpiece from scratch, this kit provides the necessary scale and stability to ensure your large-diameter dials function perfectly without straining the motor.
Mudder Clock Movement with Short Hands, 4/25 Inch Maximum Dial Thickness, 3/5 Inch Total Shaft Length
Mudder Jump Second Quartz Clock Movement Kit
- Hand size: total hour hand length: approx. 43 mm (1.7 inches). Total minute hand length: approx. 54 mm (2.1 inches). Total second hand length: approx. 75 mm (2.95 inches)
- Movement size: total shaft length: 15 mm (3/ 5 inch). Thread length: 6.7 mm (7/ 25 inch). Jump second movement, suitable for 1 - 4 mm (1/ 24 - 4/ 25 inch) thickness clock panel
- Wide application: fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and suitable as DIY quartz wall clock replacement movement parts, etc.
- Good DIY clock supply: suitable for repairing, replacing the broken parts of a clock or serving as good handwork material to make a clock by yourself
- Warm notice: there are some clock parts made of aluminum, please do not install them with too much pressure or they will be bent
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Gopera | 9.93 | Yes | Yes | Yes |
The Mudder Clock Movement with Short Hands is a precision-engineered solution for anyone looking to breathe new life into custom timepieces. This jump second movement is a dream for DIY enthusiasts working on cross-stitch projects, three-dimensional embroidery, or frameless craft clocks. The shaft length of 15mm and thread depth of 6.7mm make it perfectly compatible with panels between 1 and 4mm thick. I found the hand dimensions—ranging from the 43mm hour hand to the 75mm second hand—to be ideal for smaller-scale artistic builds. Just a quick heads-up for your assembly: some of the included aluminum components are delicate, so avoid applying excessive pressure to prevent bending. It is a reliable, specialized kit for repairing broken clocks or starting a brand-new handmade project from scratch.
Mudder High Torque Quartz Clock Movement Mechanism Motor with 250 mm/ 9.8 inches Long Straight Hands (Black)
Mudder High Torque Quartz Clock Movement Kit
- Parameter: I shaft, high torque clock mechanism, drive long clock hands (10 mm to 450 mm)
- Movement size: total shaft length is 20 mm (4/ 5 inches), thread length is 11.7 mm (9/ 20 inches), suitable for 4 - 8 mm (4/ 25 - 3/ 10 inches) thickness clock panel
- Center of hole hand size: hour hand is approx. 200 mm (7.9 inches). Minute hand is approx. 250 mm (9.8 inches). Second caps is approx. 7 mm (0.3 inches). Note: Please notice that the back of pointer is silver
- Wide application: you can enable to use it to repair, replace or make a clock. Applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc.
- Package: come with mudder specially designed blister cardboard box and instructions. Please install the movement follow the instructions
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| friendatech | 9.90 | Yes | Yes | Yes |
Transforming a piece of three-dimensional embroidery or a custom cross-stitch hoop into a functional timepiece requires a motor that won't stall under the weight of oversized hands. This Mudder high torque mechanism is designed specifically for those ambitious DIY craft projects where standard movements fail. The kit includes substantial black hands, featuring a 250 mm minute hand and a 200 mm hour hand, which are perfect for larger frameless or craft clocks. With a total shaft length of 20 mm and a thread length of 11.7 mm, it fits comfortably into panels between 4 and 8 mm thick. It arrives in a specialized blister cardboard box with clear instructions, making the repair or replacement process straightforward for anyone looking to breathe new life into a broken heirloom or a handmade art piece.
A Guide to Selecting the Best mudder clock hands
Understanding Arbor Diameter and Fitment
The most critical technical factor when selecting clock hands is the arbor diameter. The arbor is the central post extending from the movement that the hands slide onto. Most standard quartz movements use a specific shaft size, typically measured in millimeters. If you purchase hands with a hole diameter that is too large, the hands will slip and spin loosely, failing to tell time accurately. Conversely, if the hole is too small, you risk damaging the movement by forcing the hands on. Before buying, always measure your existing movement's shaft or consult the movement's technical specifications. For high-precision restoration, look for hands that specify a tight tolerance fit to ensure they remain seated even when the clock is moved or vibrated.
Balancing Weight and Torque
A common mistake in DIY clock making is choosing hands that are purely aesthetic without considering their mass. Clock movements, especially smaller quartz motors, operate on a specific amount of torque. If you choose oversized, solid brass, or heavy decorative hands, the motor may struggle to lift the minute hand to the 12 o'clock position. This leads to 'stuttering' or the clock stopping entirely. When selecting hands for a standard battery-operated movement, prioritize lightweight materials like aluminum or thin-gauge steel. If you are dead-set on heavy, ornate hands, you must ensure you are pairing them with a high-torque movement specifically designed to handle the extra load.
Length and Clearance Requirements
Visual impact is important, but the physics of the clock face dictate the limits. You must ensure that the minute hand does not strike the hour hand as they pass one another. This is known as 'hand clearance.' Additionally, you must account for the depth of the clock face. If your hands are too long, the tips might scrape against the surface of the dial or the glass cover. When measuring for new hands, always measure from the center of the arbor to the tip of the hand. A good rule of thumb is to ensure the minute hand is roughly 15-20% longer than the hour hand to maintain a classic, readable proportion without risking mechanical interference.
Aesthetic Cohesion and Materiality
Once the technical specifications are met, you can focus on the design language. Clock hands serve as the visual focal point of the timepiece. For mid-century modern designs, look for tapered, minimalist shapes in matte finishes. For traditional or antique restorations, seek out filigree or 'spade' style hands in polished brass or antiqued bronze. Pay attention to the finish. A mismatch between the metallic tone of the hands and the clock's hardware can make a custom project look unpolished. Matching the texture—such as brushed vs. polished—is the difference between a hobbyist project and a professional-grade timepiece.
Frequently Asked Questions
Quick answers about Mudder Clock Hands before you buy.
Our Mudder Clock Hands Rankings
Top 10 Mudder Clock Hands Brands on Amazon
Share of top-ranked products by brand, from our rankings.
How We Selected These Products
We compared Mudder Clock Hands products using product details and customer ratings to identify the best options in the hardware..
From that comparison we shortlisted the top 8 Mudder Clock Hands for this page..
We aim to help you find the right movements products for your needs and save you time when choosing which Mudder Clock Hands to buy.
Comparison Table
Compare the top 8 picks at a glance — select a column to sort.