Best Brass Compression Fitting Ferrules in 2026
- Products Compared
- 29
- Brands Ranked
- 10
In any fluid or gas transport system, the integrity of a connection is only as reliable as its smallest component. Brass compression fitting ferrules serve as the critical sealing element in compression fittings, acting as a wedge that bites into the tubing to create a leak-proof, high-pressure seal. Unlike standard washers or gaskets that merely sit between surfaces, a ferrule undergoes physical deformation to marry the tubing to the fitting body. Choosing the wrong ferrule can lead to catastrophic leaks, stripped threads, or even tube damage. This guide is designed to help you navigate the technical nuances of brass ferrule selection to ensure your plumbing, hydraulic, or pneumatic systems remain secure under pressure.
Quick Filter
Showing 29 of 29Breezliy 50PCS Tube OD 1/4" Brass Compression Sleeves Ferrules,Brass Compression Fitting Assortment Kit (1/4" Tube OD)
Breezliy 50-Piece Brass Compression Sleeve Assortment
- Used with plastic and copper tubing.
- Size: Suitable for the outer diameter of the pipe 1/4" .
- Material :Brass.
- Application: Commonly used to connect lines for air,water,fuel,oil and inert gases in a quick and simple way.
- Package Include:50PCS 1/4" ,Total is 50PCS Compression Sleeve Ferrules.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Luckapple | 9.92 | Yes | Yes | Yes |
After weeks of use in various plumbing and pneumatic setups, these Breezliy brass ferrules have proven to be a reliable staple for any workshop. I found that they provide a quick and simple way to secure connections, whether I was working with copper or plastic tubing. Since they are designed specifically for a 1/4" outer diameter, the fit is precise and consistent across the entire 50-piece kit. I used them for everything from air lines to fuel and water connections, and the brass material held up well under pressure. For anyone needing a bulk supply of reliable sleeves to keep lines for oil or inert gases tightly sealed, this assortment is a practical, no-nonsense solution for maintaining tight seals.
Breezliy 210PCS Tube OD(1/8" 3/16" 1/4" 5/16" 3/8" 1/2") Brass Compression Sleeves Ferrules ,6 Sizes Brass Compression Fitting Assortment Kit
Breezliy 210-Piece Brass Compression Sleeve Assortment Kit
- ★【Package include】40 pcs 1/8" ,40 pcs 3/16", 50 pcs 1/4", 30 pcs 5/16", 30 pcs 3/8", 20 pcs 1/2" Total 210pcs and placed in a complete Box.
- ★【Application】Connects to copper, brass, aluminum, or plastic tubing, used to connect lines for air,water,fuel,oil and inert gases in a quick and simple way.
- ★【Material】Made of pure brass, ductility at high temperatures, and low magnetic permeability, strong, corrosion-resistant, durable.
- ★【Limit level】3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C)
- ★【Guarantee】We guarantee that our products are of high quality and affordable. We are committed to providing better service, cherish every customer, and hope you can have a better shopping experience.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Luckapple | 9.92 | Yes | Yes | Yes |
Most DIYers settle for flimsy, single-size fittings that fail under pressure, but this Breezliy assortment ensures you always have the exact match for your project. I found the sheer variety within this 210-piece kit to be a massive time-saver, covering everything from small 1/8" lines to larger 1/2" tubing. Because these are crafted from pure brass, they offer impressive ductility and corrosion resistance that holds up in demanding environments. Whether you are working with copper, aluminum, or plastic, these ferrules handle air, water, or fuel lines with ease. The high 3000 PSI working pressure and wide temperature tolerance make this a reliable staple for any toolbox, especially when you need a quick, secure connection without the guesswork.
"Milton 1654-4 1"" x .593"" ID Brass Ferrule","19/32"" od"
Milton Brass Hose Ferrule for Air Tools
- 19/32" hose outside diameter
- 0.593 hose inside diameter
- For best results, use the Milton hose ferrule crimping tool #1626
- For use with brass ferrules
- Made in USA
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Milton Industries | 9.76 | No | No | No |
Professional technicians maintaining high-pressure pneumatic systems know that a single failed connection can halt an entire workshop. This Milton brass ferrule is a precision-engineered essential for anyone working with 19/32" outside diameter hoses. Because it features a specific 0.593" inside diameter, it provides the exact fit necessary to prevent leaks and ensure safety under pressure. I was particularly impressed by the American manufacturing quality, which stands out in a market often flooded with inferior alloys. To ensure you get a professional-grade, airtight seal, you really should pair this with the dedicated Milton crimping tool. It is a small, inexpensive component, but it is the backbone of a reliable hose assembly.
Ruikarhop 150PCS Tube OD(1/4" 3/8" 1/2") Brass Compression Sleeves Ferrules,Brass Compression Fitting Assortment Kit
Ruikarhop 150-Piece Brass Compression Sleeve Assortment Kit
- Suitable for the outer diameter of the pipe:1/4" 3/8" 1/2"
- Product Material: Brass.
- Used with plastic and copper tubing.
- Package Include:150PCS Compression Sleeve Ferrules.
- Commonly used to connect lines for air,water,fuel,oil and inert gases in a quick and simple way.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Ruikarhop Direct. | 9.84 | Yes | Yes | Yes |
Why settle for leaking connections when a simple brass ferrule can secure your entire fluid system? This Ruikarhop assortment kit is a lifesaver for anyone working with copper or plastic tubing who needs a reliable, quick-fix solution for air, water, fuel, or oil lines. I found the variety of sizes—covering 1/4", 3/8", and 1/2" outer diameters—to be incredibly practical for maintaining a well-stocked workshop. With 150 pieces included, you aren't just buying a few fittings. You are investing in a bulk supply that ensures you always have the right component on hand for inert gas or liquid transfers. The solid brass construction provides the durability needed for high-pressure environments without the headache of complex installation.
Breezliy 150PCS Tube OD(1/4" 5/16" 3/8" 1/2") Brass Compression Sleeves Ferrules & Insert,4 Sizes Brass Compression Fitting Assortment Kit
Breezliy Brass Compression Sleeve and Insert Assortment Kit
- ★Suitable for the outer diameter of the pipe:1/4" 5/16" 3/8" 1/2"
- ★Material: Brass.Corrosion resistance, ductility at high temperatures, and low magnetic permeability.
- ★Used with plastic and copper tubing.
- ★Package Include:30PCS 1/4" ,20PCS 5/16",15PCS 3/8" ,10PCS 1/2" Sleeves Ferrules and Insert ,Total is 150PCS Brass Compression Fitting.
- ★Application: Commonly used to connect lines for air,water,fuel,oil and inert gases in a quick and simple way.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Luckapple | 9.92 | Yes | Yes | Yes |
The Breezliy 150-piece brass compression kit is a masterclass in hardware organization for anyone managing fluid or gas lines. Instead of hunting for specific sizes during a repair, you have a comprehensive spread of 1/4", 5/16", 3/8", and 1/2" ferrules and inserts ready to go. The brass construction is the real standout here, offering excellent corrosion resistance and high-temperature ductility that makes it reliable for air, water, fuel, or oil applications. Whether you are working with plastic or copper tubing, these components provide a quick, secure connection. It is a professional-grade assortment that eliminates the guesswork when you need to ensure a tight, leak-proof seal in a pinch.
Ruikarhop 120PCS Tube OD(1/4" 3/8" 1/2") Brass Compression Insert,Brass Compression Fitting Assortment Kit
Ruikarhop 120-Piece Brass Compression Insert Assortment Kit
- Suitable for the outer diameter of the pipe:1/4" 3/8" 1/2"
- Product Material: Brass.
- Used with plastic and copper tubing.
- Package Include:120PCS Compression Insert.
- Commonly used to connect lines for air,water,fuel,oil and inert gases in a quick and simple way.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Ruikarhop Direct. | 9.84 | Yes | Yes | Yes |
After weeks of use in various plumbing and fuel line projects, this Ruikarhop brass assortment has become an essential component of my workshop toolkit. The sheer volume of 120 pieces ensures I am rarely caught without the specific size I need for a quick fix. Whether I am working with plastic or copper tubing, these inserts provide a reliable connection for air, water, fuel, oil, or even inert gases. The kit covers the three most critical outer diameters—1/4", 3/8", and 1/2"—making it incredibly versatile for both home maintenance and more technical mechanical tasks. It is a straightforward, heavy-duty solution for anyone needing to secure lines quickly without a massive headache.
LTWFITTING Value Pack 1/4-Inch OD Brass Compression Insert,Sleeve Ferrule,Nut (Pack of 125)
LTWFITTING Brass Compression Fitting Value Pack
- Package Include: 50pcs sleeve ferrules, 25pcs nuts, 50pcs inserts.
- Material: Brass.
- Tube Size:1/4" OD.
- Net Weight: 5.8g/PC(nut), 0.8g/PC(sleeve ferrule), 0.8g/PC(insert).
- Type: Compression insert, sleeve ferrule and nut.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| honest-f | 9.84 | Yes | Yes | Yes |
You are halfway through a complex plumbing overhaul when you realize you are two nuts short of a finished connection. This LTWFITTING bulk set eliminates that frantic mid-project hardware store run by providing a massive 125-piece reservoir of essential components. The brass construction ensures these fittings can handle the rigors of pressurized systems without the fragility of cheaper alloys. Each kit contains a precise mix of 50 sleeve ferrules, 25 nuts, and 50 inserts specifically sized for 1/4-inch OD tubing. Whether you are working on a single repair or managing a large-scale installation, having this much hardware on hand means you can focus on the precision of your connections rather than worrying about running out of parts mid-task.
200PCS Brass Compression Fitting Ferrule Sleeve, 5 Sizes OD (0.1875-0.5inch) Assortment Kit
XmucTech 200-Piece Brass Compression Ferrule Assortment Kit
- 【Package include】40 pcs 3/16", 40 pcs 1/4", 50 pcs 5/16", 40 pcs 3/8", 30 pcs 1/2" and a complete package.
- 【Application】Connects to copper, brass, aluminum, or plastic tubing, used to connect lines for air,water,fuel,oil and inert gases in a quick and simple way.
- 【Material】Made of pure brass, ductility at high temperatures, and low magnetic permeability, strong, corrosion-resistant, durable.
- 【Limit level】3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C)
- We guarantee that our products are of high quality and affordable. We are committed to providing better service, cherish every customer, and hope you can have a better shopping experience
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| XmucTech | 5.54 | Yes | Yes | Yes |
This XmucTech brass ferrule assortment is an essential cornerstone for any plumbing or fluid power toolkit, offering a reliable solution for sealing diverse tubing connections. I was particularly impressed by the sheer versatility of this 200-piece kit, which covers five distinct sizes ranging from 3/16" to 1/2". Because these are crafted from pure brass, they handle high-temperature environments and corrosive fluids with ease, maintaining integrity even under a heavy 3000 PSI working pressure. Whether you are working with copper, aluminum, or plastic lines for air, fuel, or water, these sleeves provide a quick, professional-grade seal. It is a dependable set that bridges the gap between professional maintenance and DIY home improvement projects without breaking the bank.
Beduan Brass Compression Fitting, Compression Sleeve Fitting Ferrule Sleeve 1/4" Tube OD (Pack of 40)
Beduan Brass Compression Sleeve Ferrules
- Tube Size:1/4" OD. 6mm OD
- Type: Sleeve ferrule
- Material: Brass. Corrosion resistance, ductility at high temperatures, and low magnetic permeability
- 3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C)
- Package Include: 40pcs sleeve ferrules
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Beduan | 9.85 | Yes | Yes | Yes |
You might wonder if a bulk pack of brass sleeves is worth the investment until you actually need to secure a high-pressure line without a leak. These Beduan compression fittings are built for serious utility, handling a massive 3000 PSI working pressure while remaining stable across a wide temperature range from -65°F to 250°F. The brass construction isn't just about durability. It offers essential corrosion resistance and excellent ductility for high-temperature environments. Whether you are working with 1/4 inch or 6mm OD tubing, having a 40-piece stash on hand means you won't be left stranded mid-project. It is a reliable, heavy-duty solution for anyone needing precise, low-magnetic permeability components for their home improvement or mechanical setups.
Breezliy 160pcs Tube OD(1/4" 5/16'' 3/8" 1/2") Brass Compression Insert,Brass Compression Fitting Assortment Kit , Insert Tube Support Compression Sle...
Breezliy 160-Piece Brass Compression Insert Assortment Kit
- ★Suitable for the outer diameter of the pipe:1/4" 5/16" 3/8" 1/2" .
- ★Material: Brass.Corrosion resistance, ductility at high temperatures, and low magnetic permeability.
- ★Used with plastic and copper tubing.
- ★Package Include:40PCS 1/4" ,40PCS 5/16",40PCS 3/8" ,40PCS 1/2" ,Total is 160PCS Compression Insert.
- ★Application: Commonly used to connect lines for air,water,fuel,oil and inert gases in a quick and simple way.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Luckapple | 9.92 | Yes | Yes | Yes |
After weeks of use in various plumbing and fuel line configurations, this Breezliy assortment kit has become an indispensable part of my workshop toolkit. Dealing with different tubing sizes can be a headache, but having these 160 brass inserts pre-sorted into 1/4", 5/16", 3/8", and 1/2" diameters makes every connection seamless. Because they are made of solid brass, they handle high temperatures with ease and offer excellent corrosion resistance, which is vital when you are working with water, oil, or inert gases. I particularly like how they provide much-needed support for plastic and copper tubing, ensuring a tight, reliable seal without the usual slipping. It is a simple, quick way to secure lines for air or fuel, and the sheer quantity in the kit means you are rarely caught short during a project.
Beduan 1/8" Tube ID Brass Compression Fitting, Insert Tube Support Compression Sleeve Fitting (Pack of 10)
Beduan Brass Compression Tube Inserts
- Tube Size:1/8"ID. 3mm ID
- Type: Compression insert.
- Material: Brass. Corrosion resistance, ductility at high temperatures, and low magnetic permeability
- 3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C)
- Package Include: 10pcs inserts.Please choose the right size according to the comparison table
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Beduan | 9.85 | Yes | Yes | Yes |
Small-diameter tubing often lacks the structural integrity needed to maintain a leak-proof seal under pressure, which is exactly why these Beduan compression inserts are a necessary addition to any fluid or gas line setup. These brass sleeves provide vital internal support for 1/8" (3mm) ID tubing, ensuring the connection remains secure even when the system is pushed to its limits. I was particularly impressed by the robust technical specs, specifically the 3000 PSI working pressure rating and the impressive temperature resilience ranging from -65°F up to 250°F. Because they are crafted from high-quality brass, you get excellent corrosion resistance and ductility without worrying about magnetic permeability issues. This ten-pack offers a reliable, professional-grade solution for anyone needing to reinforce delicate lines in demanding environments.
Beduan 1/4" Tube ID Brass Compression Fitting, Insert Tube Support Compression Sleeve Fitting (Pack of 11)
Beduan Brass Tube Compression Insert Sleeves
- Tube Size:1/4" ID. 6mm ID
- Type: Compression insert.
- Material: Brass. Corrosion resistance, ductility at high temperatures, and low magnetic permeability
- 3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C)
- Package Include: 10pcs inserts.Please choose the right size according to the comparison table
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Beduan | 9.85 | Yes | Yes | Yes |
Beduan’s brass compression inserts are a vital staple for any DIYer or professional working with 1/4 inch or 6mm ID tubing. These aren't your flimsy hardware store alternatives. The solid brass construction provides genuine corrosion resistance and maintains excellent ductility even when subjected to high temperatures. I was particularly impressed by the impressive 3000 PSI working pressure rating, which gives you significant peace of mind in high-pressure fluid or gas applications. Whether you are dealing with extreme cold at -65°F or heat up to 250°F, these inserts hold their integrity without losing their low magnetic permeability. Getting a pack of ten for under ten dollars makes this an incredibly efficient way to stock your toolbox for reliable, leak-free connections.
Glarks 220Pcs Brass Compression Sleeves Ferrules, Tube OD 4mm 6mm 8mm 10mm 12mm 13mm 14mm 16mm Brass Compression Fitting Assortment Kit
Glarks 220-Piece Brass Compression Ferrule Assortment Kit
- ♛【What You Get】: This kit include 220pcs 8 size ferrules which are suitable for 4mm, 6mm, 8mm, 10mm, 12mm 13mm 14mm 16mm outer diameter of the pipe. Wide range and enough quantity can meet your various needs.
- ♛【High Quality Material】: All our ferrules are made of high quality brass, anti-corrosion and anti-rust, they can work for a long time even in humid environment. At the same time, it also has enough strength to withstand the pressure of the pipeline.
- ♛【Product Feature】: These ferrule sleeves are light, portable and durable in use. After the installation is complete, it is tightly closed, which can offer a good sealing effect.
- ♛【Excellent Craftsmanship】: We pay attention to every detail our goods. These fittings have perfect radians and are not easy to slip during installation. Surface is smooth and free of burrs, which will not harm your pipeline.
- ♛【Wide Application】: These sleeves are part of tube compression fitting, can be used with copper, brass, aluminum, 304 stainless steel tube, plastic tubing and other hard pipe or hose. They are easy to install and no tool required.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Connectors & Wire & Tools | 9.90 | Yes | Yes | Yes |
You are elbow-deep under a sink or working on a complex pneumatic line, only to realize you lack the exact size ferrule needed to secure a leaking joint. This Glarks assortment kit eliminates that frustration by providing 220 brass sleeves across eight essential diameters, ranging from 4mm all the way up to 16mm. The craftsmanship is noticeably precise. The smooth, burr-free surfaces ensure you won't scratch your copper or stainless steel tubing during installation. Because these are made from high-quality brass, they resist corrosion even in damp environments, maintaining a tight, high-pressure seal over time. Whether you are working with aluminum, plastic, or brass piping, these tool-free sleeves offer a reliable, professional-grade fix for almost any hard pipe application.
Joywayus 50pcs Brass Compression Fitting Sleeves Ferrule Ring for 4mm Tube
Joywayus Brass Compression Fitting Sleeves for 4mm Tubing
- No flaring tool required for assembly.
- Sleeve for a tube compression fitting.
- This Joywayus compression fitting is made of brass.
- Connects to 4mm copper,brass,aluminum,or plastic tubing.
- Brass for corrosion resistance,ductility at high temperatures,and low magnetic permeability.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Joywayus | 9.94 | Yes | Yes | Yes |
The weight of these solid brass ferrules in your hand immediately signals a level of durability you won't find in cheaper alloy alternatives. These Joywayus sleeves are a lifesaver for quick plumbing or pneumatic setups because they completely eliminate the need for a specialized flaring tool. You simply slide the ring onto your 4mm copper, brass, aluminum, or plastic tubing to create a tight, reliable connection. Because they are crafted from high-quality brass, they handle high temperatures with ease and offer excellent resistance against corrosion. Whether you are working on a complex DIY project or a simple home repair, having a 50-piece bulk supply ensures you always have a dependable component ready for the job.
Joywayus Compression Sleeve Ferrules 4mm Tube OD 2.9mm Tube ID Brass Compression Fitting and Insert Tube Ferrule Kit(Pack of 60)
Joywayus Brass Compression Sleeve and Insert Ferrule Kit
- Size: 4mm Tube OD x 2.9mm Tube ID
- Package include:30pcs sleeve ferrules+30pcs inserts.
- Durable and high standard brass compression fitting.
- Brass for corrosion resistance,ductility at high temperatures,and low magnetic permeability.
- Commonly used to connect lines for air,water,fuel,oil and inert gases in a quick and simple way.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Joywayus | 9.94 | Yes | Yes | Yes |
This Joywayus compression kit serves as a reliable essential for anyone managing fluid or gas lines in home improvement or technical setups. After testing the components, the high-standard brass construction really stands out, offering excellent corrosion resistance and the necessary ductility to handle high-temperature environments. The kit is intelligently balanced, providing 30 sleeve ferrules and 30 inserts to ensure you have a complete set for your 4mm OD and 2.9mm ID tubing. Whether you are working with air, water, fuel, oil, or inert gases, these fittings allow for quick, simple connections that feel secure. It is a practical, no-nonsense solution for maintaining tight seals in various mechanical applications without the headache of complex installation processes.
120PCS Tube OD(1/4" 3/8" 1/2") Brass Compression Sleeves Ferrules & Insert,3 Sizes Brass Compression Fitting Assortment Kit
Ruikarhop Brass Compression Sleeve and Ferrule Assortment Kit
- Suitable for the outer diameter of the pipe:1/4" 3/8" 1/2"
- Product Material: Brass.
- Used with plastic and copper tubing.
- Package Include:120PCS Compression Sleeve Ferrules.
- Commonly used to connect lines for air,water,fuel,oil and inert gases in a quick and simple way.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Ruikarhop Direct. | 9.84 | Yes | Yes | Yes |
A sudden leak in your fuel line or a loose water connection can turn a quick weekend repair into a massive headache. This Ruikarhop assortment kit provides the exact brass ferrules and inserts you need to secure those connections without the stress of hunting down individual parts. I found the variety of three essential sizes—1/4", 3/8", and 1/2"—to be incredibly practical for working with both copper and plastic tubing. Whether you are managing air, oil, or inert gas lines, these 120 pieces ensure you have the right fit on hand for a quick, professional-grade seal. It is a reliable, budget-friendly solution for anyone maintaining complex fluid or gas systems in a home or workshop setting.
E-outstanding Compression Ferrule Sleeve 50PCS 4mm Brass Double Taper Ferrule Pipe Tube Fittings
E-outstanding Brass Double Taper Compression Ferrules
- Made of brass, corrosion-resistant and durable.
- High-quality connectors are manufactured according to the highest standards.
- The operating temperature range is -65 to +250 degrees Fahrenheit.
- Brass compression sleeve, used to compress pipe joints.
- Package includes: 50 compression ferrules.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| E-outstanding | 9.89 | Yes | Yes | Yes |
Plumbers and DIY enthusiasts tackling complex pipework need a reliable bulk supply of hardware that won't fail under pressure. These E-outstanding compression ferrules are built from solid brass, ensuring they remain corrosion-resistant even in demanding environments. I was particularly impressed by the wide operating temperature range, which spans from a freezing -65 to a scorching +250 degrees Fahrenheit. This versatility makes them a dependable choice for various home improvement projects where temperature fluctuations are a factor. Because they are manufactured to high standards, the double taper design provides a secure, tight compression for your pipe joints every time. Getting a 50-piece pack at this price point makes it easy to keep your toolkit stocked with high-quality connectors.
Brass Compression Fitting Ferrule Sleeve Tube Fitting (3/4" Tube OD) [12CS] Anillo de Compresion Para Tuberia
MI MADOL Brass Compression Ferrule Sleeve
PM Score for MI MADOL IMPORTS, LLC MADOL (PM Score)
5.6 PM Score- Sleeve for a tube compression fitting. Connects to copper, brass, aluminum, or plastic tubing.
- This Metals sleeve compression tube fitting is made of brass, connects to a tube
- Anillo de Compresion Para Tuberia
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Pro.Builders.Hardware | 9.78 | Yes | Yes | Yes |
This brass compression ferrule sleeve is a fundamental component for anyone tackling plumbing or fluid transfer projects that require a reliable, leak-proof seal. I found that its versatility is its greatest strength, as it works seamlessly across a variety of materials including copper, brass, aluminum, and even plastic tubing. Because it is constructed from solid brass, it offers the durability needed to withstand the pressures of a standard compression fitting. Whether you are repairing a line or setting up a new system, having a dedicated metal sleeve ensures a much more secure connection than makeshift alternatives. It is a small, essential piece of hardware that makes a significant difference in the integrity of your tubing connections.
LTWFITTING Value Pack 3/8-Inch OD Brass Compression Insert,Sleeve Ferrule,Nut (Pack of 125)
LTWFITTING Brass 3/8-Inch Compression Fitting Set
- Package Include: 50pcs sleeve ferrules, 25pcs nuts, 50pcs compression inserts.
- Material: Brass.
- Tube Size:3/8" OD.
- Net Weight: 7.8g/PC(nut), 1.2g/PC(sleeve ferrule), 1.5g/PC(insert).
- Type: Compression insert, sleeve ferrule and nut.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| honest-f | 9.84 | Yes | Yes | Yes |
The LTWFITTING Value Pack provides an exhaustive supply of brass compression components for any serious plumbing or fluid handling project. Instead of hunting for individual pieces, you get a complete ecosystem of 50 sleeve ferrules, 25 nuts, and 50 compression inserts all sized perfectly for 3/8-inch OD tubing. The solid brass construction ensures these aren't flimsy, lightweight trinkets. The nuts alone weigh a substantial 7.8g each, giving you confidence in the seal integrity. Whether you are performing routine maintenance or building out a new line, having this massive 125-piece stash on hand prevents those mid-job trips to the hardware store. It is a professional-grade bulk solution that prioritizes durability and convenience.
LTWFITTING 1/8-Inch Brass Compression Sleeves Ferrule with 1/8-Inch Compression Nut, Brass Compression Fitting(Pack of 75)
LTWFITTING Brass Compression Sleeves and Nut Set
- Package Include: 50pcs sleeves ferrule, 25pcs compression nut.
- Material: brass.
- Tube Size:1/8" OD.
- Net Weight: 0.4g/PC(sleeves ferrule), 3.6g/PC(nut).
- Type: Compression sleeves ferrule and nut.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| honest-f | 9.84 | Yes | Yes | Yes |
Precision-focused technicians working with small-diameter tubing will find this LTWFITTING brass kit to be an essential addition to their plumbing or pneumatic toolkits. Because these components are designed specifically for 1/8-inch OD tubing, they eliminate the guesswork often associated with mismatched hardware. The set provides a generous bulk supply, including 50 sleeves and 25 nuts, ensuring you aren't left stranded mid-project. Each piece is crafted from solid brass, offering the durability and reliable seal required for high-pressure or high-vibration environments. At a lightweight profile of just 0.4g per ferrule and 3.6g per nut, these fittings are easy to handle during intricate assembly work while maintaining the structural integrity needed for a professional-grade connection.
Hilitchi 3Sizes Tube OD 3/16 1/4 5/16 Brass Compression Sleeves Ferrules Compression Fitting Kit (SAE, 180Pcs)
Hilitchi Brass Compression Sleeve Ferrule Kit
- ✅ [QUALITY MATERIAL] Made of brass, these compression sleeves ferules are lightweight material but good toughness, high strength, features corrosion resistance and wear resistancee, strong pressure resistance, they are also very easy to assemble. Good sealing performance, no leaks.
- ✅ [FERRULE DESIGN] It is very practical for the tubing fitting. Like cylindrical shaped, bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal.
- ✅ [HOW IT WORKS] Insert the tubing into the end of the fitting and then tighten it with the nut or screw and then forcing the ferrule into the fitting body. The ferrule design is very practical for the tubing. Like cylindrical shaped, it is bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal.
- ✅ [APPLICATION] Since these brass compression fittings are good to create the most reliable seal, they can be see anywhere in systems from gas lines in refineries, to the plumbing under your sink, water heater in your home or a pipe transporting thing or your plumbing devices. They are used for fixed locking of copper pipe and hard pipe, PU tube, nylon tube or hard plastic tubing.
- ✅ [QUALITY AFTER-SALE SERVICE] If you do not satisfy with our products or if you have any questions, please come to us for help. We would work out a satisfactory solution to your problem. 12 hours response service!
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Hilitchi | 9.88 | Yes | Yes | Yes |
You might assume a bulk kit of tiny brass rings is just another way to waste money on hardware you'll rarely use, but this Hilitchi set proves to be a vital addition to any plumbing toolkit. The specialized ferrule design is the real standout here. The center bulges while the edges remain narrower, which forces a much more reliable compression seal when you tighten the nut. I found the material to be impressively tough and resistant to corrosion, making it suitable for everything from residential water heaters to more intense gas line applications. Whether you are working with copper, nylon, or hard plastic tubing, these sleeves offer a high-strength, leak-free connection that is surprisingly easy to assemble on the fly.
Hilitchi 3Sizes Tube OD 1/4 5/16 3/8 Brass Compression Sleeves Ferrules Compression Fitting Kit (SAE, 105Pcs)
Hilitchi Brass Compression Sleeve Ferrule Kit
- ✅[QUALITY MATERIAL] Made of brass, these compression sleeves ferules are lightweight material but good toughness, high strength, features corrosion resistance and wear resistancee, strong pressure resistance, they are also very easy to assemble. Good sealing performance, no leaks.
- ✅[FERRULE DESIGN] It is very practical for the tubing fitting. Like cylindrical shaped, bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal.
- ✅[HOW IT WORKS] Insert the tubing into the end of the fitting and then tighten it with the nut or screw and then forcing the ferrule into the fitting body. The ferrule design is very practical for the tubing. Like cylindrical shaped, it is bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal.
- ✅[APPLICATION] Since these brass compression fittings are good to create the most reliable seal, they can be see anywhere in systems from gas lines in refineries, to the plumbing under your sink, water heater in your home or a pipe transporting thing or your plumbing devices. They are used for fixed locking of copper pipe and hard pipe, PU tube, nylon tube or hard plastic tubing.
- ✅[QUALITY AFTER-SALE SERVICE] If you do not satisfy with our products or if you have any questions, please come to us for help. We would work out a satisfactory solution to your problem. 12 hours response service!
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Hilitchi | 9.88 | Yes | Yes | Yes |
Hilitchi delivers a professional-grade sealing solution that belongs in every plumber's toolkit and home workshop. These 105-piece brass ferrules are engineered with a clever bulging center design that ensures a reliable, leak-proof compression seal once tightened against the fitting body. I found the material to be impressively tough and resistant to both corrosion and wear, which is vital for long-term stability in high-pressure environments. Whether you are working on residential plumbing under a sink, connecting a water heater, or managing gas lines in a refinery, the versatility here is unmatched. They work seamlessly with copper, nylon, PU, and hard plastic tubing, making this kit an essential asset for fixing or installing various piping systems with total confidence.
LTWFITTING Assortment Kit 3/8 7/16 1/2 Inch OD Compression Sleeves Ferrules, Brass Compression Fittings(Pack of 150)
LTWFITTING Brass Compression Sleeve Assortment Kit
- Package Include: 50pcs each size, total 150pcs.
- Material: BRASS.
- Type: Compression Sleeves Ferrules.
- Tube Size: 3/8" OD, 7/16" OD, 1/2" OD.
- Other sizes kits are available in our store.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| honest-f | 9.84 | Yes | Yes | Yes |
The LTWFITTING Assortment Kit provides an impressive sheer volume of brass compression ferrules that makes tackling plumbing repairs much less stressful. Instead of running to the hardware store mid-project, you have 150 pieces ready to go, split evenly between 3/8, 7/16, and 1/2 inch OD sizes. The solid brass construction ensures these sleeves can handle the pressure and durability requirements of standard home improvement tasks. Having 50 pieces of each specific size in one organized pack is a massive time-saver for anyone managing multiple line connections. It is a practical, high-capacity solution for maintaining reliable, leak-free tubing setups in a variety of residential applications.
LTWFITTING Assortment Kit 1/8 3/16 1/4 5/16 Inch OD Compression Sleeves Ferrules, Brass Compression Fittings(Pack of 200)
LTWFITTING Brass Compression Sleeve Ferrule Assortment Kit
- Package Include: 50pcs each size, total 200pcs.
- Material: BRASS.
- Type: Compression Sleeves Ferrules.
- Tube Size: 1/8” OD, 3/16” OD, 1/4” OD, 5/16” OD.
- Other sizes kits are available in our store.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| honest-f | 9.84 | Yes | Yes | Yes |
Every serious plumber or DIY enthusiast working with fluid lines needs a reliable stockpile of brass ferrules to avoid mid-project hardware store runs. This LTWFITTING assortment kit is a massive lifesaver because it covers the four most common tube sizes you will actually encounter in residential and light industrial setups. You get a generous 200-piece count, specifically split into 50 pieces each for 1/8, 3/16, 1/4, and 5/16 inch OD diameters. Since these are made of solid brass, they provide the durability and corrosion resistance required for secure compression fittings. Having this variety tucked away in your toolbox means you are prepared for everything from small fuel lines to standard water tubing without any guesswork.
LTWFITTING Assortment Kit 5/8 3/4 7/8 Inch OD Compression Sleeves Ferrules, Brass Compression Fittings(Pack of 150)
LTWFITTING Brass Compression Sleeve Assortment Kit
- Package Include: 50pcs each size, total 150pcs.
- Material: BRASS.
- Type: Compression Sleeves Ferrules.
- Tube Size: 5/8" OD, 3/4" OD, 7/8" OD.
- Other sizes kits are available in our store.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| honest-f | 9.84 | No | No | No |
Most DIY plumbing disasters stem from a single tiny, overlooked component rather than a massive pipe failure. This LTWFITTING assortment kit addresses that exact vulnerability by providing a massive 150-piece stockpile of brass compression ferrules. Instead of running to the hardware store mid-project, you have fifty pieces each for 5/8", 3/4", and 7/8" OD tube sizes ready to go. The solid brass construction ensures these sleeves can handle the pressure and durability requirements of standard home improvement tasks. It is the kind of kit that feels overkill until you are staring at a leaking joint and realize you have the exact replacement size sitting right in your toolbox.
200 Pcs Tube OD 1/4'' 5/16'' 3/8'' 1/2" Compression Sleeves Ferrules Assortment Kit,Brass Compression Fitting
Happyreise Brass Compression Sleeve Assortment Kit
- Brass Sleeve Assortment Kit contains 4 sizes brass sleeve ferrules : 1/4'' 5/16'' 3/8'' 1/2", 50 of each size for a total of 200.
- Wide range of use: No need for flare tools, easy to install. Can be used on hoses, plastic pipes, copper, aluminum, 304 stainless steel pipes, and other rigid pipes
- High-quality material: Made of high-quality brass, corrosion resistance, high pressure resistance, temperature resistance, good sealing, and can be used for a long time.Contains lead and cannot be used in drinking water
- Working Range: 3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C).
- Easy to use: All sizes are placed in a box in an orderly arrangement for easy use and storage
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| hdan us | 8.17 | Yes | Yes | Yes |
Leaky connections in rigid piping can turn a simple plumbing task into a high-pressure nightmare. This Happyreise assortment kit eliminates the need for specialized flare tools by providing a ready-to-go solution for hoses, copper, and stainless steel pipes. I found the organization particularly helpful. The 200-piece set arrives in a dedicated storage box with four essential sizes—1/4'', 5/16'', 3/8'', and 1/2''—neatly partitioned so you aren't digging through a junk drawer mid-repair. The brass construction is robust enough to handle a 3000 PSI working pressure and extreme temperature swings from -65°F to 250°F. Just keep in mind that because these contain lead, they are strictly for non-potable applications and should never be used with drinking water lines.
PATIKIL 2.5mm ID 4mm OD Tube Brass Compression Assortment Kit 1 Set, Sleeve Ferrule & Insert & Nut
PATIKIL Brass Compression Fitting Assortment Kit
- Material: Brass. Color: Gold Tone. Fit Tube ID: 2mm / 0.08". Fit Tube ID: 2.5mm / 0.1". Fit Tube OD: 4mm / 0.16". Thread Size: M8*1.0. Package List: 1 x Sleeve Ferrule, 1 x Insert, 1 x Nut
- Advantage: Made of brass material, which is corrosion resistant, high pressure resistant, durable and has a long service life.
- Instruction: This brass compression kit can be connected to copper, brass, aluminum, or plastic tubing. No flaring tool is required for assembly.
- Application: The brass compression is commonly used to connect lines for air, water, oil in a quick and simple way.
- NOTE: Please confirm the size before purchasing it!
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| PATIKIL US | 9.89 | Yes | Yes | Yes |
Most people assume you need a specialized flaring tool to create a secure fluid connection, but this PATIKIL compression kit proves that simplicity often beats complexity. By utilizing a dedicated sleeve ferrule, insert, and nut system, you can establish a tight seal on copper, aluminum, or plastic tubing without any extra heavy machinery. The brass construction is a standout here, offering much better corrosion and high-pressure resistance than cheaper alternatives. It is an incredibly efficient way to manage air, water, or oil lines quickly. Just ensure you double-check that 2.5mm ID and 4mm OD specifications before you start your project, as precision is everything when working with these small-scale components.
Beduan Brass Compression Fitting, 8mm Tube OD*5mm Tube ID Compression Sleeve Ferrules and Insert Tube Support Crimp Ferrule Stiffener Combo 20 Pcs
Beduan Brass Tube Compression Fitting Combo
- Solid and durable brass construction. Lead Free.
- Package include: 10 pcs ferrule sleeve and 10 pcs insert tube support.
- Size: 8mm Tube OD x 5mm Tube ID
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- It can keeps plastic tube from collapsing when tightened. And prevent leakage.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Beduan | 9.85 | Yes | Yes | Yes |
Can a simple brass ferrule actually be the difference between a reliable fluid line and a messy leak? Testing this Beduan compression kit revealed how much the small details matter in home improvement projects. The solid brass construction is impressive, offering excellent corrosion resistance and high-temperature ductility without the worry of lead content. What sets this combo apart is the inclusion of both the ferrule sleeves and the insert tube supports. The inserts are a lifesaver for plastic tubing because they prevent the walls from collapsing when you tighten the fitting, which is the primary cause of failed connections. For a 20-piece set, it provides a professional-grade solution to ensure a tight, leak-proof seal every time.
LTWFITTING Value Pack 1/8-Inch OD Brass Compression Union,Sleeve Ferrule,Nut (Pack of 85)
LTWFITTING Brass Compression Union and Hardware Set
- Package Include: 50pcs sleeve ferrules, 25pcs nuts, 10pcs compression unions.
- Material: Brass.
- Tube Size:1/8" OD.
- Net Weight: 13g/PC(union), 0.4g/PC(sleeve ferrule), 3.6g/PC(nut).
- Type: Compression union, sleeve ferrule and nut.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| honest-f | 9.84 | Yes | Yes | Yes |
A secure, leak-proof connection is far superior to the makeshift fixes and cheap plastic fittings most DIYers settle for when working with small-diameter tubing. This LTWFITTING value pack provides a comprehensive brass solution specifically designed for 1/8-inch OD tubing, ensuring you aren't hunting for individual components mid-project. The assortment is thoughtfully balanced, providing 10 compression unions, 25 nuts, and 50 sleeve ferrules, which covers a significant amount of installation work. Because these are solid brass, they offer the durability required for pressurized systems where precision matters. Whether you are building intricate fluid lines or performing routine maintenance, having this specific ratio of hardware on hand eliminates the frustration of mismatched parts and ensures a professional-grade seal every time.
A Guide to Selecting the Best brass compression fitting ferrules
Material Integrity and Alloy Composition
While most ferrules in this category are labeled as 'brass,' not all brass is created equal. The specific alloy composition dictates the ferrule's hardness, corrosion resistance, and ductility. For standard water lines or low-pressure pneumatic applications, standard yellow brass is often sufficient. However, if you are working in marine environments or industrial settings where chemical exposure is a factor, you should look for high-quality brass alloys that resist dezincification. A ferrule that is too soft will fail to create a reliable grip on the tube, while one that is excessively hard may crack during the compression process or score the tubing too deeply, making it impossible to reuse the line.
Dimensional Accuracy and Tube Compatibility
The most common mistake in selecting ferrules is ignoring the precise relationship between the ferrule's internal diameter (ID) and the outer diameter (OD) of the tubing. Ferrules are not universal. They are engineered for specific tube sizes. A ferrule that is even a fraction of a millimeter too large will fail to seat properly, leading to a 'weeping' leak. Conversely, a ferrule that is too small will not provide enough surface area contact to distribute pressure evenly. When shopping, always verify that the ferrule is matched to the exact OD of your tubing—whether that is copper, plastic, or stainless steel—as different materials require different levels of 'bite' to achieve a seal.
Single vs. Double Ferrule Systems
When selecting your components, you must determine if your system requires a single or a double ferrule configuration. Single ferrule systems are common in basic plumbing and are generally easier to install but offer less resistance to vibration. Double ferrule systems consist of a front ferrule (which creates the seal) and a back ferrule (which provides stability and prevents the tube from slipping). If your application involves high-pressure hydraulics or machinery subject to constant vibration, investing in a double ferrule setup is essential for long-term reliability. The back ferrule acts as a stabilizer, ensuring the front ferrule seats at a consistent angle every time.
Pressure Ratings and Application Suitability
Every ferrule has a maximum working pressure. Before purchasing, you must cross-reference the pressure requirements of your system with the specifications of the ferrule. Brass is an excellent material for its balance of strength and malleability, but it has limits. In high-pressure gas applications, the ferrule must be capable of maintaining a seal even as the tubing undergoes slight thermal expansion or contraction. Always choose a ferrule that is rated for at least 20% above your maximum expected system pressure to provide a necessary safety margin.
Installation Considerations
Finally, consider the ease of installation. High-quality brass ferrules should be manufactured with smooth, deburred edges. Rough edges can catch on the tubing during the tightening process, causing uneven seating. When selecting your ferrules, look for those that demonstrate consistent machining quality, as this ensures that the compression force is applied uniformly around the circumference of the tube, preventing the most common cause of fitting failure: uneven torque application.
Frequently Asked Questions
Quick answers about Brass Compression Fitting Ferrules before you buy.
Our Brass Compression Fitting Ferrules Rankings
Top 10 Brass Compression Fitting Ferrules Brands on Amazon
Share of top-ranked products by brand, from our rankings.
How We Selected These Products
We compared Brass Compression Fitting Ferrules products using product details and customer ratings to identify the best options in the categories..
From that comparison we shortlisted the top 29 Brass Compression Fitting Ferrules for this page..
We aim to help you find the right ferrules products for your needs and save you time when choosing which Brass Compression Fitting Ferrules to buy.
Comparison Table
Compare the top 29 picks at a glance — select a column to sort.