PickSmartly Buying Guide

Best Hex Drill Bits in 2026

9.3 PM Score
Products Compared
6
Brands Ranked
1
Our guides are compiled from product information and customer ratings. If you click on links we provide, we may receive compensation.
Editor's Choice

Our Top Picks for Hex Drill Bits

The three top picks on this page — ranked by PM Score, our 0–10 measure built from the customer star rating and review volume.

Jerax tools Quick Change Step Drill Bit Double Fluted M2 High Speed Steel Drill bits for Hole Drilling in Stainless Steel, Copper, Aluminum, Wood, Pla...

Jerax Tools M2 High Speed Steel Step Drill Bit

JERAX TOOLS JTQSD001 0.40 X 0.40 X 2.80 Inches

PM Score for JERAX TOOLS (PM Score)

9.3 PM Score
Buy on Amazon
  • [M2 HSS]: Cuts A LOT MORE CLEAN holes and much EASIER than average step bits. In general, M2 has 50% more Tungsten and 150% more Molybdenum, both of which are key elements in improving the durability. Our additional Vacuum heat treatment and Nitride surface hardening treatment make the performance even better.
  • [Non-stop]: Our Polished Steps and Size Highlights make it possible for you to see target hole size during drilling. No need to stop in the middle of the drilling to check. Save you time and hassle.
  • [Easy & Fast]: With our high-accuracy CNC processing and several optimized design details over the years, our design cuts EASY, FAST and CLEAN, outperforming the average ones on the market. Comes with Quick change 1/4 inch hex shank for quick bit switches and compatible with impact ready power tools.
  • [Heavy duty]: Cuts holes on Stainless steel, Hardened Metal, Mild steel, Galvanized steel, Aluminum, Copper, Plastic, Wood, or anything that has similar or lower hardness as these materials. Up to 12ga /2.7mm thickness for Stainless steel.
  • [Multi Hole Sizes]: No need to buy a kit. This one step bit comes with 13 marked sizes so you can drill 13 different hole sizes, saving you time and efforts to change bits. Marked sizes including: 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2".
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Jerax tools 8.50 Yes Yes Yes

The unmistakable resistance of hardened steel gives way to a surprisingly smooth glide when you engage this M2 high-speed steel bit. Unlike standard step bits that struggle and overheat, the Jerax tools design utilizes a specialized vacuum heat treatment and nitride surface hardening to slice through stainless steel and copper with precision. I found the polished steps and size highlights incredibly helpful, as they let me track my target diameter in real-time without having to stop the drill to check measurements. The 1/4 inch hex shank makes swapping bits seamless, especially when moving between a standard drill and an impact driver. It is a heavy-duty workhorse that manages thirteen different hole sizes—ranging from 1/8" up to 1/2"—without the clutter of a massive multi-bit kit.

What We Like
M2 high-speed steel
Polished size highlights
Quick change hex shank
Thirteen marked sizes
Nitride surface hardening

Jerax tools Quick Change Step Drill Bit Double Fluted M2 High Speed Steel Drill bits for Hole Drilling in Stainless Steel, Copper, Aluminum, Wood, Pla...

Jerax Tools M2 High Speed Steel Step Drill Bit

JERAX TOOLS JTQSD002 0.70 X 0.70 X 3.60 Inches

PM Score for JERAX TOOLS (PM Score)

9.3 PM Score
Buy on Amazon
  • [M2 HSS]: Cuts A LOT MORE CLEAN holes and much EASIER than average step bits. In general, M2 has 50% more Tungsten and 150% more Molybdenum, both of which are key elements in improving the durability. Our additional Vacuum heat treatment and Nitride surface hardening treatment make the performance even better.
  • [Non-stop]: Our Polished Steps and Size Highlights make it possible for you to see target hole size during drilling. No need to stop in the middle of the drilling to check. Save you time and hassle.
  • [Easy & Fast]: With our high-accuracy CNC processing and several optimized design details over the years, our design cuts EASY, FAST and CLEAN, outperforming the average ones on the market. Comes with Quick change 1/4 inch hex shank for quick bit switches and compatible with impact ready power tools.
  • [Heavy duty]: Cuts holes on Stainless steel, Hardened Metal, Mild steel, Galvanized steel, Aluminum, Copper, Plastic, Wood, or anything that has similar or lower hardness as these materials. Up to 12ga /2.7mm thickness for Stainless steel.
  • [Multi Hole Sizes]: No need to buy a kit. This one step bit comes with 9 marked sizes so you can drill 9 different hole sizes, saving you time and efforts to change bits. Marked sizes including: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4".
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Jerax tools 8.50 Yes Yes Yes

You might assume a single step bit is just another disposable tool, but the Jerax tools M2 HSS bit actually holds its own against much pricier professional sets. After testing its ability to bite into tougher materials, the difference in metallurgy is obvious. The high molybdenum and tungsten content, combined with nitride surface hardening, makes a massive difference in how clean the holes come out. I particularly appreciated the polished steps and clearly marked sizes, which meant I didn't have to stop mid-drill to verify if I had hit my 1/2 inch or 5/8 inch target. It slides right into an impact driver with the 1/4 inch hex shank, making it a legitimate heavy-duty option for stainless steel or copper without the constant bit-swapping headache.

What We Like
M2 high speed steel
Nine marked sizes
Quick change hex shank
Nitride surface hardening
Polished size highlights

Jerax tools Quick Change Step Drill Bit Double Fluted M2 High Speed Steel Drill bits for Hole Drilling in Stainless Steel, Copper, Aluminum, Wood, Pla...

Jerax Tools M2 HSS Quick Change Step Drill Bit

JERAX TOOLS JTQSD003 0.70 X 0.70 X 3.60 Inches

PM Score for JERAX TOOLS (PM Score)

9.3 PM Score
Buy on Amazon
  • [M2 HSS]: Cuts A LOT MORE CLEAN holes and much EASIER than average step bits. In general, M2 has 50% more Tungsten and 150% more Molybdenum, both of which are key elements in improving the durability. Our additional Vacuum heat treatment and Nitride surface hardening treatment make the performance even better.
  • [Non-stop]: Our Polished Steps and Size Highlights make it possible for you to see target hole size during drilling. No need to stop in the middle of the drilling to check. Save you time and hassle.
  • [Easy & Fast]: With our high-accuracy CNC processing and several optimized design details over the years, our design cuts EASY, FAST and CLEAN, outperforming the average ones on the market. Comes with Quick change 1/4 inch hex shank for quick bit switches and compatible with impact ready power tools.
  • [Heavy duty]: Cuts holes on Stainless steel, Hardened Metal, Mild steel, Galvanized steel, Aluminum, Copper, Plastic, Wood, or anything that has similar or lower hardness as these materials. Up to 12ga /2.7mm thickness for Stainless steel.
  • [Multi Hole Sizes]: No need to buy a kit. This one step bit comes with 9 marked sizes so you can drill 9 different hole sizes, saving you time and efforts to change bits. Marked sizes including: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4".
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Jerax tools 9.14 Yes Yes Yes

Jerax tools has engineered a heavy-duty step bit that stands out in the drilling category by prioritizing material durability and workflow efficiency. The M2 high-speed steel construction is a massive step up from standard bits, utilizing extra tungsten and molybdenum alongside a nitride surface hardening treatment to slice through stainless steel and hardened metals with ease. I particularly like how the polished steps and clearly marked size highlights eliminate the guesswork, meaning you can hit your target diameter without constantly stopping to check progress. The 1/4 inch hex shank makes it incredibly easy to swap into impact-ready tools, and having nine distinct sizes built into a single bit makes it a versatile powerhouse for everything from copper to wood.

What We Like
M2 high-speed steel
Nitride surface hardening
Polished size highlights
Quick change hex shank
Nine marked sizes

Jerax tools Tungsten Carbide Deburring Chamfer Tool Drill Bit 1/4" to 3/4", Remove Burr, Repair Tools for Damaged Metal Steel Screws, Bolts and Fasten...

Jerax Tools Tungsten Carbide Deburring Chamfer Tool

JERAX TOOLS JT-WDJQ 0.90 X 0.90 X 2.30 Inches

PM Score for JERAX TOOLS (PM Score)

6.1 PM Score
Buy on Amazon
  • [Tungsten Carbide blade]: Carbide is a much more superior material than the HSS material that other similar products use. Carbide tools resist abrasion very well. They can also withstand much higher temperatures than steel. Tools with carbide tips maintain a sharper cutting edge better than steel tools. And they generally produce a better finish when cutting, providing a cleaner and smoother cut. In short, Carbide tools cut cleaner, faster and last longer.
  • [Chamfer]: Easily shaves down the outer edges of a screw/bolt/pipe/rod and remove the burr. Quickly repairs damaged bolts and tightens the nuts in place without hurting your hand. No sparks, and no burns. Simplifies the repair process.
  • [How to use]: Put the bit over the screws/bolts first, Start with the lowest speed, slightly Apply pressure to remove the burr and Increase the speed as needed. Do not turn on the driver until the bit fully covers the screw/bolt. Otherwise, the bit would bump over the screws/bolts and become hard to control.
  • [Wide Application]: Effective for hardened steel, mild steel, copper, brass, wood, fiberglass and hard plastic. Can be used on some stainless steel scews/bolts but need to be cautious. If there are noises that sounds like too difficult, then quit doing that.
  • [Size]: Fits 1/4" up to 3/4″ (6mm -19mm) fasteners. Quick change 1/4" shank.
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Jerax tools 8.55 Yes Yes Yes

Any mechanic or DIYer tired of wrestling with mangled fasteners needs this Jerax tools carbide bit in their toolbox immediately. Unlike standard HSS bits that dull quickly, the tungsten carbide blade stays sharp and handles high temperatures with ease, delivering a much smoother finish on damaged edges. I found that it excels at shaving down burrs on everything from copper to mild steel, making it easy to tighten nuts without the risk of sparks or burns. Just remember to start at a low speed and ensure the bit is fully seated over the bolt before engaging the driver to maintain control. It is a massive time-saver for repairing screws and rods ranging from 6mm to 19mm.

What We Like
Tungsten carbide blade
Quick release shank
Removes metal burrs
Wide application range
Smooth chamfering

Jerax tools 1/4 to 1-3/8 Inch Step Drill Bit Straight Grooved Double Fluted, M2 High Speed Steel Drill bits for Hole Drilling in Stainless Steel, Copp...

Jerax Tools M2 High Speed Steel Step Drill Bit

JERAX TOOLS STG1-3/8 1.38 X 1.38 X 3.55 Inches

PM Score for JERAX TOOLS (PM Score)

0.0 PM Score
Buy on Amazon
  • [M2 HSS]: Cuts A LOT MORE CLEAN holes and much EASIER than average step bits. In general, M2 has 50% more Tungsten and 150% more Molybdenum, both of which are key elements in improving durability. Our additional Vacuum heat treatment and Nitride surface hardening treatment make the performance even better.
  • [Non-stop]: Our Polished Steps and Size Highlights let you able to see target hole size during drilling. No need to stop in the middle of the drilling and check. Save you time and hassle.
  • [Easier | Faster | Cleaner]: With our high-accuracy CNC processing and several optimized design details over the years, our design cuts EASY, FAST and CLEAN, outperforming the average ones on the market.
  • [Heavy duty]: Cuts holes on Stainless steel, Hardened Metal, Mild steel, Galvanized steel, Aluminum, Copper, Plastic, Wood, or anything that has similar or lower hardness as these materials. Up to 12ga /2.7mm thickness for Stainless steel.
  • [Multi Hole Sizes]: No need to buy a kit. This one step bit comes with 6 marked sizes so you can drill 6 different hole sizes, saving you time and effort to change bits. Marked sizes including: 1/4", 7/8", 1-1/8", 1-7/32", 1-1/4", 1-3/8".
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Jerax tools 7.89 Yes Yes Yes

Switching between multiple drill bits just to finish a single panel is a massive waste of time that most DIYers and pros dread. This Jerax tools step bit eliminates that frustration by offering six distinct, laser-marked sizes—ranging from 1/4 to 1-3/8 inches—all in one heavy-duty tool. Because it is crafted from M2 high-speed steel with extra tungsten and molybdenum, it handles tough materials like stainless steel and copper with much more ease than standard bits. I particularly like the polished steps and size highlights. They allow you to monitor your progress in real-time without having to stop the drill to check your diameter. It is a fast, clean, and highly efficient solution for anyone drilling through metals or plastics.

What We Like
M2 high-speed steel
Six marked sizes
Nitride surface hardening
Polished step design
CNC processed precision

Jerax tools 3/16 to 7/8 Inch Step Drill Bit, M2 HSS Spiral Grooved Step Bit for Stainless Steel, Metal, Wood, Plastic

Jerax Tools M2 HSS Spiral Step Drill Bit

JERAX TOOLS SPG7/8 0.98 X 0.98 X 3.55 Inches

PM Score for JERAX TOOLS (PM Score)

0.0 PM Score
Buy on Amazon
  • [M2 HSS]: Cuts A LOT MORE CLEAN holes and much EASIER than average step bits. In general, M2 has 50% more Tungsten and 150% more Molybdenum, both of which are key elements in improving durability. Our additional Vacuum heat treatment and Nitride surface hardening treatment make the performance even better.
  • [Non-stop]: Our Polished Steps and Size Highlights let you able to see target hole size during drilling. No need to stop in the middle of the drilling and check. Save you time and hassle.
  • [Easy & Fast]: With our high-accuracy CNC processing and optimized spiral design over the years, our spiral flutes design cuts EASY, FAST and CLEAN, outperforming the average ones on the market. Compared to the Straight flutes, the Spiral flutes guide the debris out faster by its nature, making the drilling smoother and creating fewer burrs for the holes. Once you've tried our spiral design, there's no way back to the straight design.
  • [Heavy duty]: Cuts holes on Stainless steel, Hardened Metal, Mild steel, Galvanized steel, Aluminum, Copper, Plastic, Wood, or anything that has similar or lower hardness as these materials. Up to 12ga /2.7mm thickness for Stainless steel.
  • [Multi Hole Sizes]: No need to buy a kit. This one step bit comes with 12 sizes so you can drill 12 different hole sizes, saving you time and effort to change bits. Marked sizes include: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8".
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Jerax tools 8.55 Yes Yes Yes

Why settle for struggling through stainless steel with a bit that burns out halfway through the job? The Jerax tools step bit changes the game by utilizing M2 high-speed steel, which packs significantly more tungsten and molybdenum for serious durability. I was particularly impressed by the spiral flute design. Unlike standard straight flutes, these grooves actively guide debris out of the hole, preventing clogs and keeping the cut clean. The polished steps are a massive time-saver because you can actually see your target size without having to stop and measure constantly. Whether you are tackling aluminum, copper, or even 12ga stainless steel, this single bit covers twelve distinct sizes from 3/16 to 7/8 inches, making it a versatile powerhouse for any metalworking kit.

What We Like
M2 high-speed steel
Spiral flute design
Polished size markings
Twelve graduated steps
Nitride surface hardening

Frequently Asked Questions

Quick answers about Hex Drill Bits before you buy.

A hex shank refers to the shape of the bit's base that fits into your drill, while a hex head typically refers to a driver bit used for tightening screws. For drilling, you want a hex shank for quick-change compatibility with impact drivers.

High-Speed Steel (HSS) is ideal for wood, plastic, and soft metals. Cobalt bits are much harder and more heat-resistant, making them the superior choice for drilling through stainless steel and harder alloys.

Fractional sets use imperial measurements (e.g., 1/4 inch), while metric sets use millimeters (e.g., 6mm). It is best to match your set to the specific fasteners and materials you work with most frequently.

Yes, hex shank bits are specifically designed to fit the quick-release chucks of impact drivers, allowing for faster bit changes and better torque transfer.

Use a slower drill speed, apply consistent pressure, and use cutting oil when working with metal. This reduces friction and extends the lifespan of the cutting edge.

Titanium Nitride (TiN) is a hard coating applied to bits to reduce friction and increase surface hardness, which helps the bit stay sharp longer during heavy-duty use.

No. Hex shank bits are designed for wood, plastic, and metal. For masonry or concrete, you must use a masonry bit, which typically features a carbide tip and a different flute design.

If you notice increased heat, smoke, or if the bit is sliding across the material rather than biting into it, the cutting edge is likely dull and needs replacement.
Rankings & Insights

Our Hex Drill Bits Rankings

6 Products Compared
5.7 Avg PM Score
1 Brands Ranked

Top 10 Hex Drill Bits Brands on Amazon

Share of top-ranked products by brand, from our rankings.

  1. 01 Jerax Tools 6 (100%)

How We Selected These Products

We compared Hex Drill Bits products using product details and customer ratings to identify the best options in the power tools & hand tools. The top brands in this selection include dewalt, comoware, bosch, amazon basics, milwaukee, macxcoip, drill america, denali and ticonn and gmtools.

From that comparison we shortlisted the top 6 Hex Drill Bits for this page. The sellers featured here include amazon.com, tg tools, coneve, showtimetools, macxcoip, airweldonline, ticonn us, gmtools us and faxiang and amoolo direct.

We aim to help you find the right bits products for your needs and save you time when choosing which Hex Drill Bits to buy.