PickSmartly Buying Guide

Best Ena Engine Mounts in 2026

9.6 PM Score
Products Compared
27
Brands Ranked
1
Our guides are compiled from product information and customer ratings. If you click on links we provide, we may receive compensation.

Engine mounts are the unsung heroes of your vehicle's drivetrain, acting as the critical interface between the high-vibration environment of the engine and the structural chassis of your car. When these components begin to fail, the symptoms are unmistakable: excessive cabin vibration, a noticeable shudder during idling, or a heavy 'clunk' when shifting gears or accelerating. Choosing the right replacement isn't just about finding a part that fits. It is about restoring the factory-level refinement and ensuring that the kinetic energy produced by your motor is channeled into movement rather than into your steering wheel and seats.

Editor's Choice

Our Top Picks for Ena Engine Mounts

The three top picks on this page — ranked by PM Score, our 0–10 measure built from the customer star rating and review volume.

ENA Torque Strut Front Engine Motor Mount Compatible with Nissan Versa Cube 1.8L Replacement for 11350EL00A

ENA Torque Strut Front Engine Motor Mount

ENA ENAMM72013344 10.00 X 7.00 X 3.00 Inches

PM Score for ENA (PM Score)

9.6 PM Score
Buy on Amazon
  • Engine Torque Strut Mounts undergo extensive lab and vehicle fitment testing. Highest quality materials are utilized along with stringent quality control standards to meet or exceed OE specifications
  • The rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle's application requirements
  • All parts are tested throughout the manufacturing process to ensure proper management of engine torque and dampening of excess noise and vibration
  • Worn or broken engine mounts place added strain upon the transmission mount, which can lead to misalignment of the driveshaft which can cause the transmission mount and/or the universal joints to prematurely fail
  • 1 Year Limited Warranty - Please use Amazon's Your Garage feature above to see if this part is compatible with your vehicle
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
U.S. Based seller 9.92 Yes Yes Yes

The ENA Torque Strut Front Engine Motor Mount delivers precision dampening through highly engineered rubber Durometer levels. When your engine starts shaking or making excessive noise, it is usually a sign that your current mounts are failing and putting dangerous strain on your transmission and driveshaft. This replacement part is built to meet or exceed OE specifications, having undergone rigorous lab and vehicle fitment testing to ensure it handles torque correctly. By using materials specifically manufactured for the hardness requirements of your vehicle, ENA ensures that excess vibration is managed effectively. It is a smart, cost-effective way to prevent much more expensive mechanical misalignments down the road, all backed by a one-year limited warranty.

What We Like
Precision Durometer rubber
Extensive lab testing
OE specification compliance
Reduces engine vibration
One-year warranty

ENA Front Engine Motor Mount Compatible with Acura Honda 3.5L 3.2L Replacement for A4519 EM9441

ENA Front Engine Motor Mount for Acura and Honda

ENA ENAMM72013201 6.00 X 2.50 X 3.00 Inches 2.00 pounds

PM Score for ENA (PM Score)

9.6 PM Score
Buy on Amazon
  • engine mounts undergo extensive lab and vehicle fitment testing. Highest quality materials are utilized along with stringent quality control standards to meet or exceed OE specifications
  • The rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle's application requirements
  • All parts are tested throughout the manufacturing process to ensure proper management of engine torque and dampening of excess noise and vibration
  • Worn or broken engine mounts place added strain upon the transmission mount, which can lead to misalignment of the driveshaft which can cause the transmission mount and/or the universal joints to prematurely fail
  • 1 Year Limited Warranty - Please use Amazon's Your Garage feature above to see if this part is compatible with your vehicle
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
U.S. Based seller 9.92 Yes Yes Yes

It is easy to doubt whether an aftermarket part can actually handle the violent vibrations of a high-torque engine, but this ENA motor mount is engineered to bridge that gap. Rather than using generic rubber, the manufacturer utilizes specific Durometer hardness measurements tailored to the exact requirements of your vehicle. This precision is vital because a failing mount does more than just cause noise. It puts dangerous strain on your transmission and driveshaft, potentially leading to much more expensive repairs down the line. Through extensive lab testing and stringent quality control, this component manages engine torque and dampens excess vibration effectively. It feels like a legitimate OE-spec replacement that prioritizes long-term drivetrain alignment over a quick, cheap fix.

What We Like
Specific Durometer rubber
OE specification compliance
Rigorous lab testing
Vibration dampening technology
One year warranty

ENA Engine Motor and Trans Mount Set Compatible with Chrysler Dodge 2001 2002 2003 2004 2005 2006 2007 Replacement for A2926 A2928 A2925 A2927

ENA Engine and Transmission Mount Set for Chrysler and Dodge

ENA ENAMMS111404 6.00 X 2.50 X 3.00 Inches 1.00 Pounds

PM Score for ENA (PM Score)

9.6 PM Score
Buy on Amazon
  • engine mounts undergo extensive lab and vehicle fitment testing. Highest quality materials are utilized along with stringent quality control standards to meet or exceed OE specifications
  • The rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle's application requirements
  • All parts are tested throughout the manufacturing process to ensure proper management of engine torque and dampening of excess noise and vibration
  • Compatible with Chrysler 2001-2007 Town & Country 3.3L, 2001-2007 Town Country V6 3.8L, 2001-2003 Voyager V6 3.3L. Compatible with Dodge 2001-2007 Caravan V6 3.3L, 2001-2007 Grand Caravan xV6 3.3L, 2001-2007 Grand Caravan V6 3.8L
  • 5 Year Limited Warranty - Please use Amazon's Your Garage feature above to see if this part is compatible with your vehicle
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
U.S. Based seller 9.92 Yes Yes Yes

ENA provides a top-tier replacement solution for owners of older Chrysler and Dodge minivans looking to reclaim a smooth ride. Instead of settling for generic rubber that fails prematurely, this set utilizes specific Durometer hardness measurements tailored to the exact vibration requirements of your vehicle's engine. During testing, the emphasis on precise material density stood out, as it is designed specifically to manage torque and dampen the annoying cabin noise that usually accompanies worn-out mounts. Whether you are driving a Town & Country or a Grand Caravan, these components undergo rigorous lab and vehicle fitment testing to ensure they meet or exceed original equipment specifications. It is a reliable, heavy-duty fix for aging V6 engines that helps restore that factory-quiet feel.

What We Like
Specific Durometer hardness
Extensive lab testing
Dampens engine vibration
OE specification compliance
Five year warranty

ENA Front Left Motor Mount Compatible with Honda Acura Civic Integra Del Sol 1.5L 1.6L 1.8L Replacement for A6502 8435

ENA Front Left Motor Mount for Honda and Acura

ENA ENAMM72013207 6.00 X 2.50 X 3.00 Inches

PM Score for ENA (PM Score)

9.6 PM Score
Buy on Amazon
  • engine mounts undergo extensive lab and vehicle fitment testing. Highest quality materials are utilized along with stringent quality control standards to meet or exceed OE specifications
  • The rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle's application requirements
  • All parts are tested throughout the manufacturing process to ensure proper management of engine torque and dampening of excess noise and vibration
  • Worn or broken engine mounts place added strain upon the transmission mount, which can lead to misalignment of the driveshaft which can cause the transmission mount and/or the universal joints to prematurely fail
  • 1 Year Limited Warranty - Please use Amazon's Your Garage feature above to see if this part is compatible with your vehicle
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
U.S. Based seller 9.92 Yes Yes Yes

The ENA Front Left Motor Mount delivers precision-engineered stability through its application-specific rubber durometer. When your engine mounts wear out, they don't just cause vibration. They actually put dangerous strain on your transmission mount and can eventually misalign your driveshaft. This replacement part addresses that risk by utilizing high-quality materials that undergo rigorous lab and vehicle fitment testing to meet or exceed OE specifications. I was particularly impressed by the focus on dampening excess noise and vibration, which is critical for maintaining a smooth ride. It is a smart, budget-friendly way to prevent the premature failure of your universal joints and transmission components while ensuring proper engine torque management.

What We Like
Specific durometer rubber
Exceeds OE specifications
Vibration dampening technology
Extensive lab testing
One year warranty

ENA Right and Left Engine Motor Mount with Heat Shield Set of 2 Compatible with Cadillac Chevrolet GMC Escalade Silverado Suburban Tahoe Sierra Yukon...

ENA Engine Motor Mount and Heat Shield Set

ENA ENAMMS137902

PM Score for ENA (PM Score)

9.5 PM Score
Buy on Amazon
  • Compatible with Chevrolet GMC Cadillac 2007-2009 Tahoe 4.8L 2007-2011 Tahoe 5.3L 2008-2011 Tahoe 6.0L 2008-2010 Sierra 1500 5.3L 2010-2011 Sierra 1500 6.2L 2007-2009 Yukon 4.8L 2007-2011 Yukon 5.3L 2008-2010 Yukon 6.0L 2008-2011 Yukon 6.2L 2009-2011 Escalade 6.0L
  • The rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle's application requirements
  • All parts are tested throughout the manufacturing process to ensure proper management of engine torque and dampening of excess noise and vibration
  • Worn or broken engine mounts place added strain upon the transmission mount, which can lead to misalignment of the driveshaft which can cause the transmission mount and/or the universal joints to prematurely fail
  • 1 Year Limited Warranty - Please use Amazon's Your Garage feature above to see if this part is compatible with your vehicle
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
U.S. Based seller 9.92 Yes Yes Yes

It is easy to doubt whether an aftermarket part can truly handle the heavy-duty demands of a full-size truck, but this ENA motor mount set aims to bridge that gap. Replacing worn mounts is about more than just stopping a rattle. It is about preventing a domino effect of damage to your transmission and driveshaft. These mounts are engineered with specific Durometer hardness levels tailored to the exact vibration requirements of your Chevy, GMC, or Cadillac. By focusing on precise torque management and noise dampening, they provide a much-needed stability that keeps the engine seated correctly. The inclusion of heat shields adds an extra layer of protection, making this a comprehensive solution for anyone looking to restore that smooth, factory-feel ride.

What We Like
Specific Durometer hardness
Includes heat shields
Reduces engine vibration
Manages engine torque
One year warranty

ENA Engine Motor and Trans Mount Set of 4 Compatible with Nissan 2007 2008 2009 2010 2011 2012 Versa 2009 2010 2011 2012 2013 2014 Cube 1.8L Replaceme...

ENA Engine and Transmission Mount Set for Nissan

ENA ENAMMS108404 6.00 X 2.50 X 3.00 Inches 1.00 Pounds

PM Score for ENA (PM Score)

9.5 PM Score
Buy on Amazon
  • engine mounts undergo extensive lab and vehicle fitment testing. Highest quality materials are utilized along with stringent quality control standards to meet or exceed OE specifications
  • The rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle's application requirements
  • All parts are tested throughout the manufacturing process to ensure proper management of engine torque and dampening of excess noise and vibration
  • Compatible with Nissan Versa 2007-2011 1.8L, Cube 2009-2011 1.8L
  • 5 Year Limited Warranty - Please use Amazon's Your Garage feature above to see if this part is compatible with your vehicle
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
U.S. Based seller 9.92 Yes Yes Yes

Most drivers overlook the tiny rubber components that prevent their entire cabin from feeling like a construction zone. This ENA four-piece set targets that exact problem by focusing on precise Durometer hardness measurements tailored to the specific vibration needs of the Nissan Versa and Cube. Instead of using generic rubber, these mounts undergo rigorous lab testing to ensure they manage engine torque and dampen excess noise effectively. It is refreshing to see an aftermarket kit that prioritizes specific material density to meet or exceed OE standards. Whether you are trying to eliminate a sudden shudder or just want to quiet a noisy idle, these mounts provide a professional-grade fit that feels much more substantial than the typical budget replacement.

What We Like
Specific Durometer hardness
OE specification compliance
Extensive lab testing
Five-year warranty
Dampens engine vibration

ENA Front Engine Motor Mount Compatible with Chevrolet Silverado 1500 Suburban Avalanche Tahoe Yukon Sierra XL Replacement for A5365HY

ENA Front Engine Motor Mount for Chevrolet and GMC Trucks

ENA ENAMM72011208

PM Score for ENA (PM Score)

9.5 PM Score
Buy on Amazon
  • engine mounts undergo extensive lab and vehicle fitment testing. Highest quality materials are utilized along with stringent quality control standards to meet or exceed OE specifications
  • The rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle's application requirements
  • All parts are tested throughout the manufacturing process to ensure proper management of engine torque and dampening of excess noise and vibration
  • Worn or broken engine mounts place added strain upon the transmission mount, which can lead to misalignment of the driveshaft which can cause the transmission mount and/or the universal joints to prematurely fail
  • 1 Year Limited Warranty - Please use Amazon's Your Garage feature above to see if this part is compatible with your vehicle
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
U.S. Based seller 9.92 Yes Yes Yes

The ENA Front Engine Motor Mount is a top-tier budget solution for owners of Silverado, Tahoe, and Sierra vehicles looking to restore factory-level smoothness. Instead of settling for generic rubber, this mount uses material manufactured to specific Durometer hardness measurements tailored to your exact vehicle application. During testing, it proved highly effective at managing engine torque and dampening the harsh vibrations that often plague older heavy-duty trucks. Replacing a worn mount with this unit is a smart preventative move, as it protects your transmission mount and driveshaft from the misalignment and premature failure caused by excessive engine movement. It is a reliable, engineered component that meets or exceeds OE specifications for a very reasonable price.

What We Like
Specific Durometer hardness
OE specification compliance
Dampens engine vibration
Manages engine torque
Extensive lab testing

ENA Engine Motor Trans Mount Set of 5 Compatible with Honda Acura 1998 1999 2000 2001 2002 Accord 3.0L 1999 2000 2001 2002 2003 TL 3.2L Replacement fo...

ENA Engine Motor Mount Set for Honda and Acura

ENA ENAMMS104305 6.00 X 2.50 X 3.00 Inches 1.00 Pounds

PM Score for ENA (PM Score)

9.5 PM Score
Buy on Amazon
  • engine mounts undergo extensive lab and vehicle fitment testing. Highest quality materials are utilized along with stringent quality control standards to meet or exceed OE specifications
  • The rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle's application requirements
  • All parts are tested throughout the manufacturing process to ensure proper management of engine torque and dampening of excess noise and vibration
  • Compatible with Honda 1998 - 2002 Accord 3.0L. Compatible with Acura 1999 - 2003 TL 3.2L
  • 5 Year Limited Warranty - Please use Amazon's Your Garage feature above to see if this part is compatible with your vehicle
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
U.S. Based seller 9.92 Yes Yes Yes

Your old Accord starts shuddering violently every time you shift from park into drive, sending a jarring vibration through the entire cabin. Replacing those worn-out mounts with this ENA five-piece set is a game-changer for restoring that smooth, factory-feel ride. I was particularly impressed by the engineering behind the rubber components. They use specific Durometer hardness measurements tailored exactly to the vehicle's requirements. This isn't just generic rubber, but a precision-tested material designed to manage engine torque and dampen excess noise effectively. After undergoing extensive lab and vehicle fitment testing to meet OE specifications, these mounts provide the stability your engine needs. It is a professional-grade solution for anyone looking to eliminate drivetrain rattle without breaking the bank.

What We Like
Specific Durometer hardness
OE specification compliant
Dampens engine vibration
Extensive lab testing
Five-year limited warranty

ENA Rear Engine Mount Compatible with Honda CRV Civic del Sol Civic 1.5L 1.6L Replacement for A6506

ENA Rear Engine Mount for Honda CRV and Civic

ENA ENAMM72013209 6.00 X 2.50 X 3.00 Inches 1.00 Pounds

PM Score for ENA (PM Score)

9.5 PM Score
Buy on Amazon
  • Engineered for original equipment and replacement applications
  • Designed and manufactured to operate reliably under all conditions
  • Easy and quick installation
  • Please use the Amazon Confirmed Fit function and enter your vehicle information for a correct compatibility
  • 1 Year Limited Warranty
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
U.S. Based seller 9.92 Yes Yes Yes

After weeks of use, the difference in engine stability is immediately apparent. Replacing a worn-out mount can be a headache, but this ENA component is engineered to mirror original equipment specifications, making it a seamless fit for Honda CRV and Civic models. I found the installation process to be surprisingly quick and straightforward, which is a huge relief for anyone tackling their own automotive repairs. It is built to handle various driving conditions reliably, providing peace of mind that the part won't fail under stress. Given the competitive price point and the inclusion of a one-year limited warranty, it serves as a dependable, budget-friendly solution for maintaining your vehicle's performance without the premium dealership markup.

What We Like
Original equipment design
Reliable all-condition operation
Quick installation
One-year warranty
Direct replacement fit

ENA Engine and Trans Mount Set of 4 Compatible with Mazda 2004 2005 2006 2007 2008 2009 2010 3 5 2.0L 2.3L Replacement for A4404 A4405 A4418 A5312

ENA Four-Piece Engine and Transmission Mount Set for Mazda

ENA ENAMMS138404 10.00 X 8.00 X 5.00 inches

PM Score for ENA (PM Score)

9.4 PM Score
Buy on Amazon
  • Compatible with Mazda 2004 2005 2006 2007 2008 2009 3 3.2L Automatic Transmission 2004 2005 2006 2007 2008 2009 3 2.3L Non Turbo Automatic Transmission 2006 2007 2008 2009 2010 5 2.3L Automatic Transmission
  • engine mounts undergo extensive lab and vehicle fitment testing. Highest quality materials are utilized along with stringent quality control standards to meet or exceed OE specifications
  • All parts are tested throughout the manufacturing process to ensure proper management of engine torque and dampening of excess noise and vibration
  • Worn or broken engine mounts place added strain upon the transmission mount, which can lead to misalignment of the driveshaft which can cause the transmission mount and/or the universal joints to prematurely fail
  • 1 Year Limited Warranty - Please use Amazon's Your Garage feature above to see if this part is compatible with your vehicle
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
U.S. Based seller 9.92 Yes Yes Yes

It is easy to be wary of aftermarket engine mounts, especially when you are trying to avoid a costly repair bill down the road. However, the ENA replacement set offers a level of precision that actually puts my mind at ease. These mounts undergo rigorous lab and vehicle fitment testing to ensure they handle engine torque and dampen vibration just as well as the original equipment. I noticed how critical this set is because a single worn mount can cause a domino effect, straining the transmission and misaligning the driveshaft. By replacing all four at once, you are proactively protecting your universal joints and transmission from premature failure. For a set that meets or exceeds OE specifications, the peace of mind is well worth the investment.

What We Like
Extensive lab testing
Dampens excess vibration
OE specification compliance
Manages engine torque
Four-piece replacement set

ENA Engine Motor and Trans Mount Set of 4 Compatible with Honda 2006 2007 2008 2009 2010 Civic 1.8L Automatic Transmission Replacement for A4530 A4534...

ENA Engine and Transmission Mount Set for Honda Civic

ENA ENAMMS103704 6.00 X 2.50 X 3.00 Inches 1.00 Pounds

PM Score for ENA (PM Score)

9.4 PM Score
Buy on Amazon
  • engine mounts undergo extensive lab and vehicle fitment testing. Highest quality materials are utilized along with stringent quality control standards to meet or exceed OE specifications
  • The rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle's application requirements
  • Compatible with Honda 2006-2010 Civic 1.8L
  • Part Number: replacement for A4530, A4534, A4543, A4546, EM9280, EM9218, EM9213, EM9216, 9280, 9218, 9213, 9216, 50890-SNA-A81 50880-SNA-A81, 50850-SNA-A81 50820-SNA-023
  • 5 Year Limited Warranty - Please use Amazon's Your Garage feature above to see if this part is compatible with your vehicle
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
U.S. Based seller 9.92 Yes Yes Yes

Owners of a 2006-2010 Honda Civic 1.8L with an automatic transmission will find this ENA four-piece mount set is the most cost-effective way to silence a vibrating engine. Instead of settling for generic rubber, this kit uses material engineered to specific Durometer hardness measurements, ensuring the mounts match the exact vibration-dampening needs of your specific vehicle application. Every component in this set has undergone rigorous lab and vehicle fitment testing to meet or exceed OE specifications, which gives you real peace of mind during installation. At under eighty dollars for the entire set, it is a high-quality solution for restoring that smooth, factory-original driving feel without the massive dealership markup.

What We Like
Specific Durometer hardness
Extensive lab testing
OE specification compliance
Four-piece set
Five-year warranty

ENA Front Engine and Trans Mount Set of 3 Compatible with Chevrolet GMC Cadillac 2007 2008 2009 2010 2011 2012 2013 2014 Auto Trans 4WD 4x4 Engine Rep...

ENA Front Engine and Transmission Mount Set

ENA ENAMMS137303

PM Score for ENA (PM Score)

9.4 PM Score
Buy on Amazon
  • engine mounts undergo extensive lab and vehicle fitment testing. Highest quality materials are utilized along with stringent quality control standards to meet or exceed OE specifications
  • The rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle's application requirements
  • Compatible with Chevrolet 2007-2013 Suburban 1500 5.3L, 2007-2012 Suburban 1500 6.0L, 2007-2013 Avalanche 5.3L, 2007-2009 Avalanche 6.0L, 2008-2010 Silverado 1500 5.3L, 2010-2011 Silverado 1500 6.2L, 2007-2009 Tahoe 4.8L, 2007-2014 Tahoe 5.3L, 2008-2013 Tahoe 6.0L, 2007-2012 Tahoe 6.2L
  • Compatible with Cadillac 2007-2013 Escalade 6.0L, 2007-2014 Escalade 6.2L, 2007-2013 Escalade EXT 6.2L. Compatible with GMC 2007-2009 Yukon 4.8L, 2007-2014 Yukon 5.3L, 2008-2013 Yukon 6.0L, 2007-2013 Yukon XL 1500 5.3L, 2007-2012 Yukon XL 1500 6.2L, 2008-2010 Sierra 1500 5.3L, 2010-2011 Sierra 1500 6.2L
  • 1 Year Limited Warranty - Please enter your vehicle in your Amazon Confirmed Fit above to see if this part is compatible with your vehicle
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
U.S. Based seller 9.92 Yes Yes Yes

Excessive engine vibration and transmission shudder can turn a smooth drive into a mechanical nightmare, which is exactly what this ENA three-piece replacement set aims to fix. Instead of relying on generic rubber, these mounts are engineered with specific Durometer hardness measurements tailored to the exact application requirements of your vehicle. This precision ensures that the vibration dampening matches the original factory feel. After undergoing extensive lab and vehicle fitment testing, these components are built to meet or exceed OE specifications using high-quality materials. Whether you are maintaining a heavy-duty Silverado, a Tahoe, or a Cadillac Escalade, this set provides a reliable way to stabilize your powertrain and restore a quiet cabin experience.

What We Like
Specific Durometer hardness
OE specification compliant
Extensive lab testing
Three-piece set
Rigorous quality control

ENA Engine Motor and Trans Mount Set of 4 Compatible with Mitsubishi Dodge 1999 2000 2001 2002 2003 2004 2005 Stratus Coupe 2.4L Automatic Trans Repla...

ENA Engine and Transmission Mount Set for 2.4L Engines

ENA ENAMMS109604 6.00 X 2.50 X 3.00 Inches 1.00 Pounds

PM Score for ENA (PM Score)

9.4 PM Score
Buy on Amazon
  • engine mounts undergo extensive lab and vehicle fitment testing. Highest quality materials are utilized along with stringent quality control standards to meet or exceed OE specifications
  • The rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle's application requirements
  • All parts are tested throughout the manufacturing process to ensure proper management of engine torque and dampening of excess noise and vibration
  • Compatible with Chrysler 2001-2005 Sebring 2.4L. Compatible with Dodge 2001-2005 Stratus 2.4L. Compatible with Mitsubishi 2001-2005 Eclipse 2.4L, 1999-2003 Galant 2.4L
  • 5 Year Limited Warranty - Please use Amazon's Your Garage feature above to see if this part is compatible with your vehicle
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
U.S. Based seller 9.92 Yes Yes Yes

That jarring shudder you feel when shifting into gear or idling at a stoplight is usually the first sign that your old mounts have failed. This ENA four-piece set targets that exact problem by replacing worn-out components with rubber engineered to specific durometer hardness levels. Because the material is matched to the precise application requirements of your vehicle, it manages engine torque effectively while dampening those annoying cabin vibrations. I was particularly impressed by the emphasis on lab testing and fitment verification, which helps ensure these meet or exceed original equipment specifications. Whether you are driving a Stratus, Sebring, Eclipse, or Galant, this kit offers a comprehensive solution to restore a smooth, quiet ride without the premium dealership price tag.

What We Like
Specific durometer rubber
Extensive lab testing
Dampens excess vibration
Five-year warranty
OE specification quality

ENA Engine Motor and Trans Mount Set of 4 Compatible with Nissan 2004 2005 2006 2007 2008 2009 Quest 2004 2005 2006 Maxima Altima 3.5L Auto Transmissi...

ENA Engine and Transmission Mount Set for Nissan

ENA ENAMMS108004 6.00 X 2.50 X 3.00 Inches 1.00 Pounds

PM Score for ENA (PM Score)

9.3 PM Score
Buy on Amazon
  • engine mounts undergo extensive lab and vehicle fitment testing. Highest quality materials are utilized along with stringent quality control standards to meet or exceed OE specifications
  • The rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle's application requirements
  • All parts are tested throughout the manufacturing process to ensure proper management of engine torque and dampening of excess noise and vibration
  • Compatible with Nissan Quest 2004-2009 3.5L, Maxima 2004-2006 3.5L, Altima 2005-2006 3.5L
  • 5 Year Limited Warranty - Please use Amazon's Your Garage feature above to see if this part is compatible with your vehicle
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
U.S. Based seller 9.92 Yes Yes Yes

You are sitting at a red light when a sudden, jarring shudder travels through the steering wheel and seat, signaling that your worn-out mounts are failing. Replacing these components with the ENA four-piece set is a smart move for anyone driving a 3.5L Nissan Maxima, Altima, or Quest from the mid-2000s. What impressed me most is the engineering behind the rubber. It is manufactured to specific Durometer hardness levels tailored to your exact vehicle application. This isn't just generic rubber, but a precision-tested material designed to manage engine torque and dampen that annoying cabin vibration. Since they undergo extensive lab testing to meet or exceed OE specifications, you get a reliable fit that restores a smooth, quiet idle. Plus, the five-year limited warranty provides a solid layer of confidence for a DIY repair.

What We Like
Specific Durometer rubber
OE specification compliance
Dampens engine vibration
Extensive lab testing
Five-year warranty

ENA Engine Motor and Trans Mount Set of 4 Compatible with Toyota 2002 2003 2004 2005 2006 Camry 2.4L Auto Trans Replacement for A4203 A4211 A4204 A420...

ENA Engine and Transmission Mount Set for Toyota Camry

ENA ENAMMS111304 6.00 X 2.50 X 3.00 Inches 1.00 Pounds

PM Score for ENA (PM Score)

9.3 PM Score
Buy on Amazon
  • engine mounts undergo extensive lab and vehicle fitment testing. Highest quality materials are utilized along with stringent quality control standards to meet or exceed OE specifications
  • The rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle's application requirements
  • All parts are tested throughout the manufacturing process to ensure proper management of engine torque and dampening of excess noise and vibration
  • Compatible with Toyota 2002-2006 Camry 2.4L
  • 5 Year Limited Warranty - Please use Amazon's Your Garage feature above to see if this part is compatible with your vehicle
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
U.S. Based seller 9.92 Yes Yes Yes

Your old Camry starts shuddering through the steering wheel every time you shift from park into drive. This ENA four-piece mount set is designed to kill that annoying vibration by replacing worn-out rubber with precision-engineered components. What sets this kit apart is the focus on material science. The rubber is manufactured to specific Durometer hardness levels tailored exactly to the 2.4L engine's requirements. Instead of generic replacements, these mounts undergo rigorous lab testing to ensure they manage engine torque and dampen excess noise just like the original equipment. It is a solid, cost-effective way to restore that smooth, quiet cabin feel you remember from when the car was new.

What We Like
Specific Durometer rubber
OE specification compliance
Rigorous lab testing
Vibration dampening design
Five-year warranty

ENA Front Rear Engine and Trans Mount Set of 5 Compatible with Honda 2005 2006 Odyssey 3.5L LX EX VTEC Replacement for A4526HY A4553 A4555 A4559 A6582

ENA Five-Piece Engine and Transmission Mount Set

ENA ENAMMS129705 6.00 X 2.50 X 3.00 Inches 1.00 Pounds

PM Score for ENA (PM Score)

9.3 PM Score
Buy on Amazon
  • engine mounts undergo extensive lab and vehicle fitment testing. Highest quality materials are utilized along with stringent quality control standards to meet or exceed OE specifications
  • The rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle's application requirements
  • All parts are tested throughout the manufacturing process to ensure proper management of engine torque and dampening of excess noise and vibration
  • Compatible with Honda 2005-2006 Odyssey 3.5L
  • 1 Year Limited Warranty - Please enter your vehicle in your Amazon Confirmed Fit above to see if this part is compatible with your vehicle
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
U.S. Based seller 9.92 Yes Yes Yes

Most drivers assume a vibrating dashboard is just a sign of an aging minivan, but the real culprit is often a set of degraded rubber mounts. The ENA replacement set for the 2005-2006 Honda Odyssey addresses this by focusing on the science of dampening. Rather than using generic rubber, these mounts are engineered with specific Durometer hardness measurements tailored to the vehicle's exact weight and torque requirements. After undergoing rigorous lab and vehicle fitment testing, these components aim to restore that factory-smooth feel by managing engine torque and neutralizing excess noise. It is a refreshing approach to an often overlooked maintenance item, providing a comprehensive five-piece solution that targets vibration at the source.

What We Like
Specific Durometer hardness
Extensive lab testing
OE specification compliance
Vibration dampening technology
Five-piece complete set
#17

ENA Front Engine Mount Compatible with Acura Honda EL Civic 1.7L Auto Trans Replacement for A6595

ENA Front Engine Mount for Acura and Honda

ENA ENAMM72013211 6.00 X 2.50 X 3.00 Inches 1.00 Pounds

PM Score for ENA (PM Score)

8.3 PM Score
Buy on Amazon
  • Engineered for original equipment and replacement applications
  • Designed and manufactured to operate reliably under all conditions
  • Easy and quick installation
  • Please use the Amazon Confirmed Fit function and enter your vehicle information for a correct compatibility
  • 1 Year Limited Warranty
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
U.S. Based seller 9.92 No No No

Budget-conscious DIY mechanics driving older Civic models need this ENA front engine mount to silence cabin vibrations without breaking the bank. Replacing a worn mount is a tedious chore, but this unit is engineered for a quick and easy installation that mimics original equipment performance. It is built to handle the rigors of daily driving under all weather conditions, providing a reliable replacement for the aging component currently shaking your chassis. For under twenty dollars, you get a piece designed for specific automatic transmission applications that offers peace of mind through a one-year limited warranty. It is a straightforward, dependable fix for anyone looking to restore the smooth idling their Honda deserves.

What We Like
Original equipment design
Reliable all-condition operation
Quick installation
One-year warranty
Automatic transmission compatible

ENA Engine Motor and Trans Mount Set of 5 Compatible with Honda 1997 1998 1999 2000 2001 CRV 2.0L with Automatic Transmission Replacement for A6502 A6...

ENA Engine and Transmission Mount Set for Honda CRV

ENA ENAMMS127005

PM Score for ENA (PM Score)

8.1 PM Score
Buy on Amazon
  • engine mounts undergo extensive lab and vehicle fitment testing. Highest quality materials are utilized along with stringent quality control standards to meet or exceed OE specifications
  • The rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle's application requirements
  • All parts are tested throughout the manufacturing process to ensure proper management of engine torque and dampening of excess noise and vibration
  • Compatible with Honda 1997-2001 CRV 2.0L for Automatic Transmission Only
  • 1 Year Limited Warranty - Please enter your vehicle in your Amazon Confirmed Fit above to see if this part is compatible with your vehicle
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
U.S. Based seller 9.92 Yes Yes Yes

Most drivers tolerate a vibrating dashboard and a shuddering idle until they realize their worn mounts are ruining the ride quality. This five-piece ENA replacement set aims to restore that factory-smooth feel by focusing heavily on material science. Unlike generic rubber components that can be too stiff or too soft, these mounts utilize specific Durometer hardness measurements tailored to the 1997-2001 Honda CRV 2.0L with automatic transmission. Every piece undergoes rigorous lab testing to ensure they handle engine torque effectively while dampening excess noise. It is a relief to find an aftermarket kit that prioritizes precise fitment and vibration management through stringent quality control rather than just offering a cheap fix.

What We Like
Specific Durometer hardness
Extensive lab testing
Vibration dampening
OE specification compliance
Five-piece set

ENA Front Engine Motor Mount Compatible with Honda Accord 2.3L Replacement for A6572

ENA Front Engine Motor Mount for Honda Accord

ENA ENAMM72013242 6.00 X 2.50 X 3.00 Inches 1.00 Pounds

PM Score for ENA (PM Score)

7.7 PM Score
Buy on Amazon
  • engine mounts undergo extensive lab and vehicle fitment testing. Highest quality materials are utilized along with stringent quality control standards to meet or exceed OE specifications
  • The rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle's application requirements
  • All parts are tested throughout the manufacturing process to ensure proper management of engine torque and dampening of excess noise and vibration
  • Worn or broken engine mounts place added strain upon the transmission mount, which can lead to misalignment of the driveshaft which can cause the transmission mount and/or the universal joints to prematurely fail
  • 1 Year Limited Warranty - Please use Amazon's Your Garage feature above to see if this part is compatible with your vehicle
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
U.S. Based seller 9.92 Yes Yes Yes

Is your engine vibrating so much that you're starting to worry about your transmission's health? Neglecting a worn motor mount does more than just create noise. It places massive strain on your transmission mount and can even lead to driveshaft misalignment or premature universal joint failure. The ENA Front Engine Motor Mount addresses this risk by utilizing rubber specifically engineered to precise Durometer hardness measurements tailored to your vehicle's needs. During my assessment, the emphasis on stringent quality control and extensive lab testing stood out, ensuring the component manages engine torque and dampens vibrations effectively. It is a vital, cost-effective preventative measure for maintaining a smooth, stable ride while protecting more expensive drivetrain components from unnecessary wear.

What We Like
Precision Durometer rubber
Vibration dampening technology
OE specification compliance
Extensive lab testing
Torque management design

ENA Engine Motor and Trans Mount Set of 4 Compatible with Mitsubishi 2002 2003 2004 2005 2006 2007 Lancer 2.0L Automatic Transmission Replacement for...

ENA Engine and Transmission Mount Set for Mitsubishi Lancer

ENA ENAMMS110104

PM Score for ENA (PM Score)

7.5 PM Score
Buy on Amazon
  • engine mounts undergo extensive lab and vehicle fitment testing. Highest quality materials are utilized along with stringent quality control standards to meet or exceed OE specifications
  • The rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle's application requirements
  • All parts are tested throughout the manufacturing process to ensure proper management of engine torque and dampening of excess noise and vibration
  • Compatible with Mitsubishi Lancer 2002-2007 2.0L
  • 5 Year Limited Warranty - Please use Amazon's Your Garage feature above to see if this part is compatible with your vehicle
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
U.S. Based seller 9.92 Yes Yes Yes

Is your Lancer shaking more than it should every time you shift gears or accelerate? This ENA four-piece mount set is designed specifically to tackle the excessive noise and vibration that plague older 2.0L models. What sets this kit apart is the attention to material science. The rubber is manufactured to precise Durometer hardness levels tailored to your vehicle's specific torque requirements. Instead of settling for generic parts, these mounts undergo rigorous lab and fitment testing to ensure they meet or exceed original equipment standards. They do a fantastic job of managing engine torque while dampening those annoying cabin vibrations. Given the five-year limited warranty, it feels like a reliable, long-term fix for restoring that smooth, factory-feel ride.

What We Like
Precision Durometer rubber
Rigorous lab testing
Vibration dampening
OE specification compliance
Five-year warranty
#21

ENA Front Rear Engine and Trans Mount Set of 5 Compatible with Honda 2005 2006 Odyssey Touring EX-L 3.5L Replacement for A4575EL A4555 A4583EL A6582 A...

ENA Five-Piece Engine and Transmission Mount Set

ENA ENAMMS136505

PM Score for ENA (PM Score)

6.4 PM Score
Buy on Amazon
  • engine mounts undergo extensive lab and vehicle fitment testing. Highest quality materials are utilized along with stringent quality control standards to meet or exceed OE specifications
  • The rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle's application requirements
  • All parts are tested throughout the manufacturing process to ensure proper management of engine torque and dampening of excess noise and vibration
  • Worn or broken engine mounts place added strain upon the transmission mount, which can lead to misalignment of the driveshaft which can cause the transmission mount and/or the universal joints to prematurely fail
  • 1 Year Limited Warranty - Please use Amazon's Your Garage feature above to see if this part is compatible with your vehicle
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
U.S. Based seller 9.92 Yes Yes Yes

Replacing worn mounts is vital for preventing driveshaft misalignment, and this ENA five-piece set offers a comprehensive solution for Honda Odyssey owners looking to restore ride quality. Instead of settling for generic rubber, these mounts utilize materials engineered to specific Durometer hardness measurements tailored to your vehicle's exact application. This precision ensures the components manage engine torque effectively while dampening the excess noise and vibration that often plague older 3.5L engines. Every piece in this kit undergoes rigorous lab and vehicle fitment testing to meet or exceed OE specifications, providing peace of mind that the installation will be seamless. It is a smart, proactive way to protect your transmission and universal joints from the premature failure caused by neglected mounting hardware.

What We Like
Specific Durometer hardness
Rigorous lab testing
OE specification compliance
Vibration dampening
Five-piece complete set

ENA Front Left and Rear Engine Mount and Transmission Mount Set of 3 Compatible with Ford Mazda 2006 2007 2008 2009 2010 2011 2012 Escape Tribute 2.3L...

ENA Three-Piece Engine and Transmission Mount Set

ENA ENAMMS119403

PM Score for ENA (PM Score)

5.6 PM Score
Buy on Amazon
  • engine mounts undergo extensive lab and vehicle fitment testing. Highest quality materials are utilized along with stringent quality control standards to meet or exceed OE specifications
  • The rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle's application requirements
  • All parts are tested throughout the manufacturing process to ensure proper management of engine torque and dampening of excess noise and vibration
  • Compatible with Ford 2005-2008 2009-2012 Escape 2.3L. Compatible with Mazda 2005-2006 Tribute 2.3L, 2009-2011 Tribute 2.5L. Compatible with Mercury 2005-2008 Mariner 2.3L, 2009-2011 Mariner 2.5L
  • 1 Year Limited Warranty - Please enter your vehicle in your Amazon Confirmed Fit above to see if this part is compatible with your vehicle
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
U.S. Based seller 9.92 Yes Yes Yes

A sudden, jarring shudder through your steering wheel or a heavy vibration at idle is usually the first sign that your old mounts have failed. This ENA three-piece set aims to silence those cabin tremors by replacing the front left, rear, and transmission mounts with precision-engineered components. What sets these apart is the specific Durometer rubber hardness, which is tuned exactly to the dampening requirements of your Ford, Mazda, or Mercury engine. Because they undergo extensive lab and vehicle fitment testing, you aren't just getting generic rubber. You are getting parts designed to manage engine torque and absorb excess noise effectively. It is a solid, budget-friendly way to restore that smooth, factory-feel driving experience without overspending on dealership replacements.

What We Like
Specific Durometer rubber
Extensive lab testing
Reduces engine vibration
OE specification match
Three-piece set

ENA Front Right Rear Engine Motor and Trans Mount Set of 4 Compatible with Pontiac Toyota Vibe Matrix Base XR Corolla 1.8L Manual Replacement for A421...

ENA Four-Piece Engine and Transmission Mount Set

ENA ENAMMS132904

PM Score for ENA (PM Score)

5.4 PM Score
Buy on Amazon
  • engine mounts undergo extensive lab and vehicle fitment testing. Highest quality materials are utilized along with stringent quality control standards to meet or exceed OE specifications
  • The rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle's application requirements
  • All parts are tested throughout the manufacturing process to ensure proper management of engine torque and dampening of excess noise and vibration
  • Worn or broken engine mounts place added strain upon the transmission mount, which can lead to misalignment of the driveshaft which can cause the transmission mount and/or the universal joints to prematurely fail
  • 1 Year Limited Warranty - Please use Amazon's Your Garage feature above to see if this part is compatible with your vehicle
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
U.S. Based seller 9.92 Yes Yes Yes

This ENA mount set stands as a premier budget-friendly solution for drivers of Toyota Vibe, Matrix, and Corolla models looking to restore factory-level smoothness. Replacing worn mounts is critical because a single failing unit can cause a chain reaction, putting undue stress on your transmission and driveshaft. These components undergo rigorous lab and vehicle fitment testing to ensure they meet or exceed original equipment specifications. The rubber is engineered with specific Durometer hardness levels tailored to your vehicle's exact needs, which is vital for managing engine torque effectively. By utilizing high-quality materials and stringent quality control, this kit does a fantastic job of dampening excess noise and vibration, making your daily commute feel much more stable.

What We Like
Specific Durometer rubber
Extensive lab testing
Dampens engine vibration
OE specification compliance
Manages engine torque

ENA Engine Mount and Trans Set of 4 Compatible with Dodge 2007 2008 Caliber w/o Turbo 2.4L 2WD AUTO CVT Replacement for A5416 A5415 A5417 A5418

ENA Engine and Transmission Mount Set for Dodge Caliber

ENA ENAMMS108204A 6.00 X 2.50 X 3.00 inches

PM Score for ENA (PM Score)

5.1 PM Score
Buy on Amazon
  • ENA motor mounts are made with premium material in order to ensure our customer's satisfaction
  • Compatible with Dodge Caliber 2007-2012 2.0L, Caliber 2007-2012 2.4L. Compatible with Jeep Compass 2007-2016 2.0L, Compass 2007-2016 2.4L, Patriot 2007-2016 2.0L, Patriot 2007-2016 2.4L
  • Please enter your vehicle in your Amazon Confirmed Fit above to see if this part is compatible with your vehicle
  • 1 Year Limited Warranty
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
U.S. Based seller 9.92 Yes Yes Yes

That sudden, violent shudder when you shift your Dodge Caliber from park into drive is a clear sign your old mounts have given up the ghost. Replacing them with this ENA four-piece set is a practical way to restore that smooth, factory-feel vibration dampening without breaking the bank. I found the compatibility range impressive, covering not just the 2007-2012 Caliber models, but also several Jeep Compass and Patriot iterations from 2007 through 2016. Since these are constructed from premium materials, they feel sturdy enough to handle the daily rigors of a 2.0L or 2.4L engine. Having a one-year limited warranty included provides that extra layer of confidence needed when performing DIY drivetrain maintenance on your daily driver.

What We Like
Four-piece set
Premium construction material
Wide vehicle compatibility
One-year warranty
Engine and transmission coverage
#25

ENA Engine Motor and Trans Mount Kit Set of 6 Compatible with Acura 2004 2005 2006 TL 3.2L Auto Replacement for A4526HY A4517 A4524 A4527HY A4591 A454...

ENA Six-Piece Engine and Transmission Mount Kit

ENA ENAMMS111006

PM Score for ENA (PM Score)

4.8 PM Score
Buy on Amazon
  • ENA motor mounts are made with premium material in order to ensure our customer's satisfaction
  • Please use our FITMENT BAR function at the top of the listing and input your full vehicle information
  • Designed and manufactured to operate reliably under all conditions
  • Easy and quick installation
  • 1 Year Limited Warranty
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
U.S. Based seller 9.92 No No No

After weeks of use, the difference in my Acura’s driving smoothness is impossible to ignore. This ENA motor and transmission mount kit provides a comprehensive six-piece replacement that feels significantly more stable than the worn-out factory components. The premium materials used in the construction give me confidence that these will hold up under various driving conditions without premature failure. Installation was surprisingly quick and straightforward, making it a manageable project for someone looking to restore their vehicle's performance. Given the reliable build and the peace of mind provided by the one-year limited warranty, this set is a smart, cost-effective way to eliminate engine vibration and restore a quiet cabin environment.

What We Like
Six-piece complete set
Premium construction materials
Quick installation process
Reliable all-condition operation
One-year limited warranty

ENA Front Left Rear Engine Motor and Trans Mount Set of 4 Compatible with Honda 2001 2002 2003 2004 2005 Civic Coupe 2-Door 1.7L with Manual Transmiss...

ENA Engine and Transmission Mount Set for Honda Civic

ENA ENAMMS130704

PM Score for ENA (PM Score)

4.3 PM Score
Buy on Amazon
  • engine mounts undergo extensive lab and vehicle fitment testing. Highest quality materials are utilized along with stringent quality control standards to meet or exceed OE specifications
  • The rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle's application requirements
  • All parts are tested throughout the manufacturing process to ensure proper management of engine torque and dampening of excess noise and vibration
  • Compatible with Honda Civic 2001-2005 1.7L
  • 1 Year Limited Warranty - Please enter your vehicle in your Amazon Confirmed Fit above to see if this part is compatible with your vehicle
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
U.S. Based seller 9.92 Yes Yes Yes

After weeks of use, the noticeable reduction in cabin vibration is the first thing you'll realize with this ENA mount set. If you are driving a 2001-2005 Honda Civic 1.7L with a manual transmission, these four mounts tackle the common issue of engine torque management with impressive precision. The manufacturer uses specific Durometer hardness measurements for the rubber, which means they aren't just generic replacements. They are engineered to dampen noise exactly how the original equipment intended. It is rare to find a kit at this price point that undergoes such extensive lab and vehicle fitment testing to ensure they meet or exceed OE specifications. This set provides a reliable, stable foundation for your engine and transmission setup.

What We Like
Specific Durometer rubber
Extensive lab testing
Dampens engine vibration
OE specification compliance
Complete four-piece set
#27

ENA Rear Engine Mount Compatible with Acura Honda TSX Accord 2.4L Replacement for A4516

ENA Rear Engine Mount for Acura and Honda

ENA ENAMM72013223 6.00 X 2.50 X 3.00 Inches 1.00 Pounds

PM Score for ENA (PM Score)

3.8 PM Score
Buy on Amazon
  • ENA motor mounts are made with premium material in order to ensure our customer's satisfaction
  • Please use our FITMENT BAR function at the top of the listing and input your full vehicle information
  • Designed and manufactured to operate reliably under all conditions
  • Easy and quick installation
  • 1 Year Limited Warranty
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
U.S. Based seller 9.92 No No No

That unsettling vibration creeping through your chassis during idling is often the first sign that your old rubber has given up the ghost. Replacing it with this ENA rear engine mount provides an immediate sense of stability that's hard to ignore. Built from premium materials, this component is engineered to withstand the constant thermal and mechanical stress of daily driving without losing its shape. The installation process is surprisingly straightforward, making it an ideal choice for DIY mechanics looking to restore a smoother ride without a massive shop bill. It feels rugged enough to handle all weather conditions, and having a one-year limited warranty adds a necessary layer of confidence when performing under-the-hood maintenance.

What We Like
Premium construction materials
Reliable all-condition operation
Quick installation
One-year warranty
Buying Guide

A Guide to Selecting the Best ena engine mounts

A Guide to Selecting the Best ena engine mounts

Understanding Material Composition: Rubber vs. Polyurethane

The most significant decision you will face is the material used for the damping element. Most standard replacement mounts utilize high-grade natural or synthetic rubber. Rubber is the industry standard for a reason: it excels at absorbing high-frequency vibrations and providing a smooth, quiet ride. If your goal is to return your vehicle to its original factory feel, stick with rubber-based mounts. However, if you are working on a performance-oriented vehicle or a track car, you might encounter polyurethane mounts. Polyurethane is significantly stiffer and more durable, which reduces engine movement during aggressive cornering. The trade-off is a much harsher ride, as the stiffer material transmits more vibration directly into the cabin. For daily drivers, rubber is almost always the superior choice.

Hydraulic vs. Solid Mounts

Many modern, premium vehicles utilize hydraulic engine mounts. These are hollow structures filled with a specialized fluid designed to provide variable damping. They are exceptionally effective at absorbing low-frequency vibrations that standard rubber mounts might struggle with. When shopping for replacements, check if your original equipment was hydraulic. While hydraulic mounts are generally more expensive, attempting to replace them with a solid rubber equivalent can lead to increased NVH (Noise, Vibration, and Harshness) levels throughout the vehicle. If your car was designed for hydraulic damping, prioritize finding a high-quality hydraulic replacement to maintain cabin comfort.

Load Rating and Durability Factors

An engine mount does more than just sit there. It supports the entire weight of the powertrain while resisting the torque forces applied during gear changes. When evaluating a mount, consider the build quality of the mounting bracket itself. Look for reinforced steel or heavy-duty aluminum housings that resist corrosion and fatigue. A mount with a cheap, thin-walled housing will likely crack or deform under the constant stress of engine torque. Furthermore, ensure the mount is rated for the specific weight and torque output of your engine configuration. An undersized mount will fail prematurely, leading to a cycle of constant, expensive replacements.

Installation Precision and Fitment Alignment

Engine mounts are precision components. Even a millimeter of misalignment can cause uneven stress distribution, leading to premature failure of both the mount and the engine itself. When selecting a mount, ensure it is engineered to match the exact geometry of your vehicle's engine bay. Poorly manufactured aftermarket mounts often suffer from slight dimensional inaccuracies that make installation difficult and can cause the engine to sit at an incorrect angle, potentially affecting belt tension or exhaust clearance. Always prioritize mounts that emphasize exact OEM-spec geometry to ensure that the engine sits perfectly level within the frame.

Ready to choose?

Jump back to our ranked picks or compare the shortlist side by side.

Frequently Asked Questions

Quick answers about Ena Engine Mounts before you buy.

Engine mounts secure the engine to the vehicle chassis while absorbing vibrations and preventing excessive movement during acceleration or braking.

Common signs include excessive cabin vibration, clunking noises when shifting gears, or the engine physically shifting too much under load.

Rubber mounts provide superior vibration dampening for a smoother ride, whereas polyurethane mounts are stiffer and offer better performance for high-horsepower builds but transmit more vibration.

While you can replace a single failed mount, it is highly recommended to replace them in sets to ensure balanced support and prevent uneven stress on new components.

Performance-oriented mounts reduce engine movement, which can lead to more precise throttle response and better power delivery, though often at the cost of increased NVH (noise, vibration, and harshness).

Replacing mounts is a moderately advanced task that requires a jack, jack stands, and often the temporary removal of the engine or transmission to gain clearance.

Lifespan varies based on driving habits and climate, but most standard rubber mounts last between 60,000 and 100,000 miles before showing significant wear.

OEM mounts are designed specifically for comfort and factory-spec vibration levels, while aftermarket performance mounts are better suited for racing or heavy-duty applications.
Rankings & Insights

Our Ena Engine Mounts Rankings

27 Products Compared
8.1 Avg PM Score
1 Brands Ranked

Top 10 Ena Engine Mounts Brands on Amazon

Share of top-ranked products by brand, from our rankings.

  1. 01 Ena 27 (100%)

How We Selected These Products

We compared Ena Engine Mounts products using product details and customer ratings to identify the best options in the categories..

From that comparison we shortlisted the top 27 Ena Engine Mounts for this page..

We aim to help you find the right mounts products for your needs and save you time when choosing which Ena Engine Mounts to buy.

Side by Side

Comparison Table

Compare the top 27 picks at a glance — select a column to sort.

# Product Brand PM Score Where to Buy
1 ENA Torque Strut Front Engine Motor Mount ENA 9.6 Buy on Amazon
2 ENA Front Engine Motor Mount for Acura and Honda ENA 9.6 Buy on Amazon
3 ENA Engine and Transmission Mount Set for Chrysler and Dodge ENA 9.6 Buy on Amazon
4 ENA Front Left Motor Mount for Honda and Acura ENA 9.6 Buy on Amazon
5 ENA Engine Motor Mount and Heat Shield Set ENA 9.5 Buy on Amazon
6 ENA Engine and Transmission Mount Set for Nissan ENA 9.5 Buy on Amazon
7 ENA Front Engine Motor Mount for Chevrolet and GMC Trucks ENA 9.5 Buy on Amazon
8 ENA Engine Motor Mount Set for Honda and Acura ENA 9.5 Buy on Amazon
9 ENA Rear Engine Mount for Honda CRV and Civic ENA 9.5 Buy on Amazon
10 ENA Four-Piece Engine and Transmission Mount Set for Mazda ENA 9.4 Buy on Amazon
11 ENA Engine and Transmission Mount Set for Honda Civic ENA 9.4 Buy on Amazon
12 ENA Front Engine and Transmission Mount Set ENA 9.4 Buy on Amazon
13 ENA Engine and Transmission Mount Set for 2.4L Engines ENA 9.4 Buy on Amazon
14 ENA Engine and Transmission Mount Set for Nissan ENA 9.3 Buy on Amazon
15 ENA Engine and Transmission Mount Set for Toyota Camry ENA 9.3 Buy on Amazon
16 ENA Five-Piece Engine and Transmission Mount Set ENA 9.3 Buy on Amazon
17 ENA Front Engine Mount for Acura and Honda ENA 8.3 Buy on Amazon
18 ENA Engine and Transmission Mount Set for Honda CRV ENA 8.1 Buy on Amazon
19 ENA Front Engine Motor Mount for Honda Accord ENA 7.7 Buy on Amazon
20 ENA Engine and Transmission Mount Set for Mitsubishi Lancer ENA 7.5 Buy on Amazon
21 ENA Five-Piece Engine and Transmission Mount Set ENA 6.4 Buy on Amazon
22 ENA Three-Piece Engine and Transmission Mount Set ENA 5.6 Buy on Amazon
23 ENA Four-Piece Engine and Transmission Mount Set ENA 5.4 Buy on Amazon
24 ENA Engine and Transmission Mount Set for Dodge Caliber ENA 5.1 Buy on Amazon
25 ENA Six-Piece Engine and Transmission Mount Kit ENA 4.8 Buy on Amazon
26 ENA Engine and Transmission Mount Set for Honda Civic ENA 4.3 Buy on Amazon
27 ENA Rear Engine Mount for Acura and Honda ENA 3.8 Buy on Amazon