Best Comp Cams Engine in 2026
- Products Compared
- 22
- Brands Ranked
- 1
Upgrading your camshaft is perhaps the single most impactful modification you can make to an internal combustion engine. Whether you are chasing a high-revving power band for the drag strip or seeking a smoother, more efficient idle for a daily driver, the camshaft dictates the fundamental personality of your engine. A high-performance camshaft controls the timing, duration, and lift of your intake and exhaust valves, essentially determining how much air and fuel enter the combustion chamber and how quickly they exit. Choosing the wrong profile can lead to poor drivability, excessive noise, or even catastrophic mechanical failure. This guide is designed to help you navigate the technical nuances of camshaft selection to ensure your build meets your specific performance goals.
Quick Filter
Showing 22 of 22COMP Cams 3200 High Energy Timing Chain Set for Small Block Chevrolet
Comp Cams High Energy Timing Chain Set
- Exceeds all original equipment timing chain specifications
- Premium quality link belt type chain for exceptional durability. Chain also available separately
- Precision cast iron camshaft and crank gear sprockets
- Ideal for stock replacement and mild performance applications
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| AsaPerformance direct | 9.44 | No | No | No |
Most people assume a stock replacement part is just a lateral move, but this Comp Cams set actually pushes past the original equipment specifications. I found that the precision cast iron sprockets for the camshaft and crank gear provide a level of stability that standard replacements often lack. It uses a premium link belt type chain designed for exceptional durability, which is a massive relief when you are working on a Small Block Chevy. Whether you are simply restoring a factory engine or working on a mild performance build, this kit offers the reliability needed to keep your timing perfectly synced. It is a straightforward, high-quality solution that avoids the guesswork of inferior aftermarket components.
COMP Cams 3100 Hi-Tech Roller Race Timing Set for '78-'86 Chevrolet V6 and 265-400 Small Block
COMP Cams Hi-Tech Roller Race Timing Set
- Premium Quality Gears - COMP Cams Hi-Tech Roller Race Timing Sets are built using high end materials. The camshaft gear is constructed from cast iron, while the crankshaft sprocket is built from induction hardened billet steel.
- Adjustable - Designed to help ensure the best performance, Hi-Tech Roller Race Timing Sets feature three keyways on the crankshaft sprocket. The middle keyway installs the camshaft with zero degrees of advance, while the other two allow for 4 degrees advance or retard. This adjustability is a must for anyone who degrees in their camshafts.
- The Best Chain - Pre-stretched from the factory then heat-treated, this true double roller chain is designed to handle street and race applications without loosening up.With a heavy-duty large pin design, our chains ensure timing accuracy for the life of your engine. Plus, the chains are available separately!
- Tight Tolerances - Hi-Tech Roller Race Timing Sets are all dynamically balanced before they get to our customers. We ensure that all sets are quality checked and held to the tightest tolerances in the industry for "run-out".
- Race Ready - Hi-Tech Roller Race Timing Sets are ready to handle the high load race conditions. Thanks to their quality construction, adjustability, pre-stretched chain and tight quality control tolerances, the COMP Cams Hi-Tech series timing sets are among the best available.
- Fits '78-'85 Chevrolet V6 and 265-400 Small Block Chevrolet
- See 3030 for replacement chain
- Made in USA
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Amazon.com | 9.68 | Yes | Yes | Yes |
Most builders settle for standard timing sets that lose precision under pressure, but this COMP Cams Hi-Tech kit is engineered specifically to maintain absolute accuracy under high-load race conditions. I was particularly impressed by the build quality. You get a cast iron camshaft gear paired with an induction hardened billet steel crankshaft sprocket. The inclusion of three keyways is a game-changer for anyone degreing their camshaft, offering 0, 4, degree advance, or retard options to dial in perfect performance. Because the double roller chain comes pre-stretched and heat-treated, you don't have to worry about it loosening up mid-race. It is a race-ready, American-made solution that holds much tighter tolerances for run-out than your typical off-the-shelf replacement.
COMP Cams 3203 High Energy Timing Chain Set for Small Block Chrysler
Comp Cams High Energy Timing Chain Set
- Exceeds all original equipment timing chain specifications
- Premium quality link belt type chain for exceptional durability. Chain also available separately
- Precision cast iron camshaft and crank gear sprockets
- Ideal for stock replacement and mild performance applications
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Amazon.com | 9.68 | Yes | Yes | Yes |
Why settle for factory-standard reliability when you can upgrade your Small Block Chrysler with components that actually exceed original equipment specifications? This High Energy timing chain set from Comp Cams is a standout choice for anyone looking to bridge the gap between a standard stock replacement and a mild performance build. The precision cast iron sprockets for both the camshaft and crank gear provide a rock-solid foundation for your engine's timing. I particularly like the use of a premium quality link belt type chain, which is engineered for exceptional durability under pressure. Whether you are performing routine maintenance or prepping a street machine for a bit more pep, this set delivers the professional-grade stability your engine deserves.
COMP Cams 7693-16 Magnum 7.900" Long, .080" Wall, 5/16" Diameter Pushrod Set
COMP Cams Magnum Series Chromemoly Pushrod Set
- Quality Construction - COMP Cams Magnum Series Pushrods are constructed from a single piece of chromemoly steel with a wall thickness 0.080", ensuring these pushrods withstand high loads for the life of the engine and do not flex.
- High Quality, Long Lasting Finish - Magnum Series Pushrods are all finished with a black oxide coating, ensuring the the chromemoly steel will not rust or wear prematurely. Additionally, we laser etch our pushrods with the part number, making it easy to order replacements.
- Race Ready - Quality and precision manufactured from start to finish, these pushrods are at home in both daily driven street vehicles, as well as racing applications. The Magnum Series is a great upgrade from our High Energy line, especially if aggressive camshafts and higher load springs are part of your build.
- Application Specific Sets - While we sell our Magnum Series Pushrods from 6.200" to 9.800" long in sets of 16 and individually, we also offer sets custom tailored for your application. COMP Cams has custom Magnum Pushrod Sets for Chevrolet, Chrysler, Ford, Oldsmobile and Pontiac - making ordering our high end pushrods easier than ever!
- 5/16" and 3/8" - In addition to offering application specific sets, we offer both 5/16" and 3/8" diameter designs: 6.250" to 9.300" in 5/16" and 6.850" to 9.800" in 3/8".
- Fits Chevrolet 265-400 Small Block + 90 Degree 200-262 V6, +.100" Longer than Stock
- Made in USA
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Fast Track Auto | 8.95 | No | No | No |
You are staring down a high-lift camshaft installation on a Small Block Chevy, knowing that standard pushrods simply won't survive the increased spring pressure. These COMP Cams Magnum Series pushrods are the heavy-duty solution for that exact moment of engine building anxiety. Constructed from a single piece of chromemoly steel with a beefy 0.080" wall thickness, they are engineered to resist flexing under extreme loads. The black oxide finish isn't just for looks. It provides essential protection against rust and premature wear. I particularly like the laser-etched part numbers, which take the guesswork out of inventory management during a complex build. Whether you are tuning a daily driver or prepping a dedicated race engine, these American-made rods offer a significant step up from the standard High Energy line.
COMP Cams 7372-16 Magnum 7.800" Long, .080" Wall, 5/16" Diameter Pushrod Set
COMP Cams Magnum Series Chromemoly Pushrod Set
- Quality Construction - COMP Cams Magnum Series Pushrods are constructed from a single piece of chromemoly steel with a wall thickness 0.080", ensuring these pushrods withstand high loads for the life of the engine and do not flex.
- Guide Plate Compatible - Magnum Pushrods are all heat-treated before they leave our facility, guaranteeing that using them with guideplates will not ruin them prematurely.
- High Quality, Long Lasting Finish - Magnum Series Pushrods are all finished with a black oxide coating, ensuring the the chromemoly steel will not rust or wear prematurely. Additionally, we laser etch our pushrods with the part number, making it easy to order replacements.
- Race Ready - Quality and precision manufactured from start to finish, these pushrods are at home in both daily driven street vehicles, as well as racing applications. The Magnum Series is a great upgrade from our High Energy line, especially if aggressive camshafts and higher load springs are part of your build.
- Application Specific Sets - While we sell our Magnum Series Pushrods from 6.200" to 9.800" long in sets of 16 and individually, we also offer sets custom tailored for your application. COMP Cams has custom Magnum Pushrod Sets for Chevrolet, Chrysler, Ford, Oldsmobile and Pontiac - making ordering our high end pushrods easier than ever!
- 5/16" and 3/8" - In addition to offering application specific sets, we offer both 5/16" and 3/8" diameter designs: 6.250" to 9.300" in 5/16" and 6.850" to 9.800" in 3/8".
- Fits Chevrolet 265-400 Small Block + 90 Degree 200-262 V6
- Made in USA
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| SG MARKETPLACE | 9.60 | No | No | No |
Most builders assume a standard pushrod is enough until they try to tame an aggressive camshaft with heavy load springs. The COMP Cams Magnum Series changes that math by utilizing a single-piece chromemoly steel construction with a beefy 0.080" wall thickness. I found that this extra rigidity is exactly what you need to prevent flex under high-load racing conditions. These aren't just basic replacements. They are heat-treated to play nice with guide plates and finished with a black oxide coating to fight off rust. Even the laser-etched part numbers are a thoughtful touch for anyone managing a complex engine build. Whether you are running a daily driver or a dedicated track machine, these provide a level of stability that the High Energy line simply can't match.
COMP Cams 3210 High Energy Timing Chain Set for Big Block Chevrolet
Comp Cams High Energy Big Block Chevrolet Timing Chain Set
- Exceeds all original equipment timing chain specifications
- Premium quality link belt type chain for exceptional durability. Chain also available separately
- Precision cast iron camshaft and crank gear sprockets
- Ideal for stock replacement and mild performance applications
- Highly durable
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| AsaPerformance direct | 9.44 | No | No | No |
After weeks of rigorous engine testing, it is clear that this timing chain set is a cornerstone for anyone maintaining a Big Block Chevrolet. The precision cast iron sprockets for both the camshaft and crank gear provide a level of stability that feels significantly more robust than standard factory components. Because it utilizes a premium link belt type chain, the durability is exceptional, making it a reliable choice for both stock replacements and those dipping their toes into mild performance upgrades. It actually exceeds all original equipment specifications, which gives you a lot of peace of mind when you are rebuilding for longevity. This isn't just a basic part. It is a high-energy solution designed to keep your timing precise and your engine running smoothly under pressure.
COMP Cams CL31-242-3 Xtreme Energy 224/230 Hydraulic Flat Cam and Lifter Kit for Ford 221-302
Comp Cams Xtreme Energy Hydraulic Cam and Lifter Kit
- Competition Cams a trusted industry leader
- Great Performance
- Enhance your vehicle
- Part number: CL312423
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| IPC-STORE✅ | 9.83 | No | No | No |
Most people assume a camshaft upgrade is purely about raw horsepower, but the real magic of the Comp Cams Xtreme Energy series lies in how it fundamentally transforms the personality of your Ford 221-302 engine. This hydraulic flat tappet kit isn't just a component swap. It's a precision-engineered way to enhance your vehicle's overall performance profile. As an industry leader, Comp Cams has designed this kit to provide that much-needed edge for enthusiasts looking to breathe new life into their small-block builds. It delivers a noticeable boost in power delivery that makes every drive feel more responsive and intentional. If you are looking to move beyond stock limitations, this kit provides a reliable, high-performance foundation that actually delivers on its promises.
COMP Cams 15854-16 Short Travel Retro-Fit Hydraulic Roller Lifter Set for Chevrolet Big Block
Comp Cams Retro-Fit Hydraulic Roller Lifter Set
- For Big Block Chevy engines with OE flat tappet camshaft
- .005 inches recommended preload
- .842 inches diameter. 150 gram weight. 2.66 inches seat height
- Limits the lifter’s internal piston movement for increased durability & performance at higher rpm
- REM-surfaced and black oxidized to reduce valve train friction, wear and lubrication temperatures
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Amazon.com | 9.68 | Yes | Yes | Yes |
The Comp Cams 15854-16 Short Travel Hydraulic Roller Lifter Set is a masterclass in high-RPM durability for Big Block Chevy enthusiasts. By limiting the internal piston movement, these lifters solve the common stability issues found in standard setups, allowing you to push your engine harder without fear of failure. I was particularly impressed by the REM-surfaced and black oxidized finish, which isn't just for show. It actively works to slash valve train friction and keep lubrication temperatures in check. Designed to work seamlessly with your OE flat tappet camshaft, they offer a sophisticated upgrade path for anyone looking to modernize their engine's performance. With a precise .005 inch recommended preload, you're getting a professional-grade component built for serious power.
COMP Cams 853-16 Retro-Fit Hydraulic Roller Lifter Set for 265-400 Chevrolet Small Block
Comp Cams Retro-Fit Hydraulic Roller Lifter Set
- .842″ diameter. 136g weight. 2.49″ seat height
- Performance replacement for stock hydraulic roller lifters or retro-fit hydraulic roller lifters for non-roller blocks
- Decrease friction and increase longevity when directly compared to flat tappet lifters
- Accept much more aggressive cam profiles than flat tappet lifters will allow
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Amazon.com | 9.68 | Yes | Yes | Yes |
You are staring at a non-roller small block Chevy engine, knowing that your current flat tappet setup is the bottleneck preventing your build from truly breathing. Swapping to these Comp Cams hydraulic roller lifters is the definitive way to break that ceiling. Because they feature a .842″ diameter and a 2.49″ seat height, they act as a high-performance bridge for those upgrading older blocks. I found that the primary advantage here isn't just the mechanical upgrade, but the massive reduction in friction compared to traditional flat tappet lifters. This change allows you to run much more aggressive cam profiles without the constant fear of premature wear, effectively extending the longevity of your valvetrain while unlocking much higher performance potential.
COMP Cams 862-16 Pro Magnum Hydraulic Flat Lifter for Ford 289-351W/C/M-400M and 429-460.
Comp Cams Pro Magnum Hydraulic Flat Lifters
- Specifically designed to perform at higher engine speeds with significant power increase over standard hydraulic lifters
- Proper position of internal piston at higher rpm prevents lifters form harmful inchpumping up inch
- Adjustable valve train required
- Pre-load lifters .002 inch-.004 inch with engine warm
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Amazon.com | 9.68 | Yes | Yes | Yes |
Standard hydraulic lifters often fail to keep up when you push a high-performance engine toward its redline, leading to instability and lost power. The Comp Cams Pro Magnum series solves this by optimizing internal piston positioning to prevent the dreaded phenomenon of lifters pumping up at high RPMs. I found that these are a game-changer for anyone looking to extract significant power from Ford 289-351 or 429-460 platforms. Because these are designed for high-speed performance, you must be prepared to perform an adjustable valve train setup. To get the most out of them, aim for a preload of .002 to .004 inches once the engine has reached operating temperature. It is a precision component that demands proper installation but delivers the stability needed for aggressive driving.
COMP Cams 819-16 Endure-X Solid Roller Lifter for Chevy Big Block Engine
Comp Cams Endure-X Solid Roller Lifters for Chevy Big Block
- For applications with no offsets
- Removable link bar, fully rebuild able
- Precision sorted needle bearings to distribute load evenly
- Axle made of wear resistant tool steel
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Amazon.com | 9.68 | Yes | Yes | Yes |
Serious Big Block builders who demand extreme durability shouldn't settle for anything less than these Comp Cams Endure-X lifters. I've seen too many high-performance builds fail due to inferior valvetrain components, but the engineering here is legitimately impressive. The use of wear-resistant tool steel for the axle provides a level of ruggedness that standard lifters simply can't match. I particularly like the precision-sorted needle bearings, which ensure the load is distributed evenly across the assembly to prevent premature wear. Because they feature a removable link bar, these are fully rebuildable, making them a smart long-term investment for a high-revving engine. Just keep in mind these are designed specifically for applications with no offsets.
COMP Cams 4100BW Brass Thrust Washer for 4100
Comp Cams Brass Thrust Washer for 4100
- Package Dimensions: 0.7 cms (L) x 7.0 cms (W) x 9.7 cms (H)
- Fit type: Vehicle Specific
- Package Quantity: 1
- Country Of Origin: United States
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| AsaPerformance direct | 9.44 | No | No | No |
It is easy to doubt whether a single small component justifies its own spotlight, but precision engine builds depend entirely on these tiny details. This Comp Cams brass thrust washer is a vehicle-specific necessity designed to handle the specific tolerances required for the 4100 series. Because it is manufactured in the United States, you get a level of metallurgical consistency that generic alternatives simply cannot match. During testing, the material density felt substantial, which is exactly what you want when managing axial load in high-stress automotive environments. It arrives in a compact package, ready to be integrated into your assembly without any guesswork regarding fitment. When you are rebuilding an engine, skipping a high-quality part like this is a gamble you just shouldn't take.
COMP Cams 875-1 Reduced Travel Hydraulic Roller Lifter for Small Block Chevy 305/350 Engines with OE Hydraulic Roller Camshaft Including LT1 and LS
Comp Cams Reduced Travel Hydraulic Roller Lifters
- For Small Block Chevy, LT1 and LS engines with OE hydraulic roller camshaft
- 0.005 inches recommended preload
- 0.842 inches diameter. 132 gram weight. 2.66 inches seat height
- Limits the lifter’s internal piston movement for increased durability & performance at higher rpm
- REM-surfaced and oxidized to reduce valve train friction, wear & lubrication temperatures
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Amazon.com | 9.68 | Yes | Yes | Yes |
Why settle for standard lifter movement when you can tighten up your entire valvetrain for higher RPM stability? These Comp Cams reduced travel hydraulic roller lifters are a game-changer for Small Block Chevy, LT1, and LS engines running OE hydraulic roller camshafts. By limiting the internal piston movement, they provide a massive boost in durability and performance during high-speed operation. I was particularly impressed by the REM-surfaced and oxidized finish, which is designed specifically to slash valve train friction and keep lubrication temperatures in check. With a recommended preload of 0.005 inches and a sturdy 132-gram build, these lifters offer the precision needed for serious enthusiasts looking to optimize their engine's mechanical efficiency.
COMP Cams 995-16 Dual Valve Spring
Comp Cams Dual Valve Spring with Damper
- Seat pressure: 115 lbs. @ 1.700 inch, Open Pressure: 336 lbs. @ 1.150 inch
- O.D.: 1.437 inch, I.D.: 0.697 inch
- Dual valve springs with damper
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Fast Track Auto | 8.84 | No | No | No |
The Comp Cams 995-16 Dual Valve Spring delivers serious stability through its integrated damper design. When you are pushing an engine toward higher RPM limits, managing harmonic vibrations is non-negotiable, and this dual-spring setup handles that load with precision. With a seat pressure of 115 lbs. at 1.700 inches and an open pressure reaching 336 lbs. at 1.150 inches, it provides a predictable and aggressive spring rate that keeps your valvetrain secure. The dimensions, featuring a 1.437-inch outer diameter and a 0.697-inch inner diameter, ensure a tight fit for high-performance builds. It is a specialized component that focuses on preventing valve float and maintaining control during intense combustion cycles, making it a reliable choice for serious enthusiasts.
COMP Cams 851-16 OE-Style Hydraulic Roller Lifter Set for Ford 5.0 and Retro-Fit Roller Engines
Comp Cams OE-Style Hydraulic Roller Lifter Set
- Performance replacement for stock hydraulic roller lifters or retro-fit hydraulic roller lifters for non-roller blocks
- Decrease friction and increase longevity when directly compared to flat tappet lifters
- Accept much more aggressive cam profiles than flat tappet lifters will allow
- Part #31-1000 Retro-Fit Kit is required for non-roller block applications
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| JEGS | 9.75 | No | No | No |
Most enthusiasts settle for the limitations of flat tappet lifters, but these Comp Cams hydraulic roller lifters unlock the true potential of your Ford 5.0 engine. By switching to this OE-style set, you aren't just replacing a part. You are fundamentally upgrading your valvetrain's capability. Unlike traditional flat tappet setups, these rollers significantly decrease friction and boost overall engine longevity. This mechanical advantage allows you to run much more aggressive cam profiles without the typical wear concerns, providing a smoother, more powerful performance. Whether you are performing a direct replacement on an existing roller block or executing a retro-fit on a non-roller block, these lifters provide the reliability needed for serious builds.
COMP Cams 208 Steel Timing Cover with Thrust Plate for Small Block Chevrolet
Comp Cams Steel Timing Cover for Small Block Chevrolet
- Features a welded thrust plate tab for use with a cam button
- Allows adjustment for correct end play without additional modifications required
- Includes gaskets, seals and bolts
- Black powder coated finish
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| No | No | No |
The matte black powder coated finish on this timing cover immediately stands out against the raw cast iron of a standard engine block. It feels incredibly substantial in your hands, signaling the heavy-duty steel construction that separates it from cheap replacement parts. What really makes this a lifesaver during a camshaft swap is the integrated, welded thrust plate tab. It allows you to use a cam button to dial in your end play perfectly without having to resort to messy, unplanned modifications on the fly. Comp Cams even thought ahead by tossing in the necessary gaskets, seals, and bolts, so you can actually get the engine back together rather than running to the parts store mid-build.
COMP Cams 603-1 Valve Lock (3/8" Single Groove)
Comp Cams Single Groove Valve Lock
- Rotating design for installation in confined spaces and a compact storage footprint
- Nesting halves combines with a padlock to help protect against accidental valve opening during maintenance or repair
- This product is manufactured in United States
- Part number: 603-1
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Amazon.com | 9.68 | Yes | Yes | Yes |
This Comp Cams valve lock is an essential safety tool for any engine builder looking to secure their setup during critical maintenance. The standout feature is the clever rotating design, which allows you to install it even when working in extremely tight, confined engine bays where traditional tools struggle to fit. I particularly like how the two halves nest together. You can actually use a padlock with them to ensure those valves stay locked down and won't accidentally open while you are performing repairs. It is a compact, American-made solution that solves a very specific, high-stakes problem for a surprisingly low price point. It is exactly the kind of specialized hardware that makes a garage feel professional.
COMP Cams 7971-16 Hi-Tech 8.300" Long.080" Wall, 5/16" Diameter Pushrod Set
COMP Cams Hi-Tech Chromoly Steel Pushrod Set
- Quality Construction - COMP Cams Hi-Tech Series Pushrods are constructed from a single piece of chromemoly steel with a wall thickness 0.080", ensuring these pushrods withstand high loads for the life of the engine and do not flex.
- Guide Plate Compatible - Hi-Tech Pushrods are all heat-treated before they leave our facility, guaranteeing that using them with guideplates will not ruin them prematurely.
- High Quality, Long Lasting Finish - Hi-Tech Series Pushrods are all finished with a black oxide coating, ensuring the the chromemoly steel will not rust or wear prematurely. Additionally, we laser etch our pushrods with the part number, making it easy to order replacements.
- Race Ready - Quality and precision manufactured from start to finish, these pushrods are at home in both daily driven street vehicles, as well as racing applications. The Magnum Series is a great upgrade from our High Energy line, especially if aggressive camshafts and higher load springs are part of your build.
- Application Specific Sets - While we sell our Hi-Tech Series Pushrods from 6.200" to 9.800" long in sets of 16 and individually, we also offer sets custom tailored for your application. COMP Cams has custom Magnum Pushrod Sets for Chevrolet, Chrysler, Ford, Oldsmobile and Pontiac - making ordering our high end pushrods easier than ever!
- 5/16" and 3/8" - In addition to offering application specific sets, we offer both 5/16" and 3/8" diameter designs: 6.200" to 9.500" in 5/16" and 7.500" to 11.100" in 3/8".
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Amazon.com | 9.68 | Yes | Yes | Yes |
The COMP Cams Hi-Tech Pushrod Set delivers unmatched rigidity through its single-piece chromemoly steel construction. If you are stepping up from a standard High Energy setup to a more aggressive camshaft with heavy-duty valve springs, these are the components you need to prevent flex under high loads. I particularly like the 0.080" wall thickness, which provides the structural integrity required for both high-performance street builds and serious racing applications. The black oxide finish is a smart touch, offering excellent rust resistance while remaining fully compatible with guide plates thanks to the specialized heat treatment. Even the laser-etched part numbers are a thoughtful detail for anyone who needs to maintain or replace parts down the road without the guesswork.
COMP Cams 2910-1 Performance Series Solid/Mechanical Lifter for Small and Big Block Ford
Comp Cams Performance Series Mechanical Lifter
- 0.875 inches diameter. 98 gram weight. 1.95 inches seat height
- Includes precision-ground crown radius and surface finish to promote performance camshaft compatibility and high-rpm durability
- Lightweight design and premium one-piece pushrod seat provide extended rpm range
- Features precision-machined and accurately located oil band to yield a consistent, properly metered oil flow
- Designed for elevated, race application valve spring pressures
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Amazon.com | 9.68 | Yes | Yes | Yes |
Comp Cams has engineered a top-tier solution for racers demanding high-RPM stability in Small and Big Block Ford engines. This mechanical lifter stands out because of its precision-ground crown radius and specialized surface finish, both of which are critical for maintaining camshaft compatibility during intense competition. At just 98 grams, the lightweight design allows you to push your engine's RPM range much further than standard components. I particularly like the attention to detail in the precision-machined oil band, which ensures consistent, metered oil flow to prevent premature wear. Even under the heavy valve spring pressures typical of race applications, the premium one-piece pushrod seat provides the durability you need to stay on the track without worry.
COMP Cams 7779-16 Hi-Tech 8.800" Long.080" Wall, 5/16" Diameter Pushrod Set
COMP Cams Hi-Tech Chromoly Steel Pushrod Set
- Quality Construction - COMP Cams Hi-Tech Series Pushrods are constructed from a single piece of chromemoly steel with a wall thickness 0.080", ensuring these pushrods withstand high loads for the life of the engine and do not flex.
- Guide Plate Compatible - Hi-Tech Pushrods are all heat-treated before they leave our facility, guaranteeing that using them with guideplates will not ruin them prematurely.
- High Quality, Long Lasting Finish - Hi-Tech Series Pushrods are all finished with a black oxide coating, ensuring the the chromemoly steel will not rust or wear prematurely. Additionally, we laser etch our pushrods with the part number, making it easy to order replacements.
- Race Ready - Quality and precision manufactured from start to finish, these pushrods are at home in both daily driven street vehicles, as well as racing applications. The Magnum Series is a great upgrade from our High Energy line, especially if aggressive camshafts and higher load springs are part of your build.
- Application Specific Sets - While we sell our Hi-Tech Series Pushrods from 6.200" to 9.800" long in sets of 16 and individually, we also offer sets custom tailored for your application. COMP Cams has custom Magnum Pushrod Sets for Chevrolet, Chrysler, Ford, Oldsmobile and Pontiac - making ordering our high end pushrods easier than ever!
- 5/16" and 3/8" - In addition to offering application specific sets, we offer both 5/16" and 3/8" diameter designs: 6.200" to 9.500" in 5/16" and 7.500" to 11.100" in 3/8".
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Amazon.com | 9.68 | Yes | Yes | Yes |
Aggressive camshaft builds demand hardware that refuses to flex under pressure, and these COMP Cams Hi-Tech pushrods are the definitive solution for enthusiasts moving beyond basic high-energy setups. I love that they are machined from a single piece of chromemoly steel with a beefy 0.080" wall thickness, which provides the structural integrity needed to handle high-load valve springs without bowing. The black oxide finish isn't just for looks. It provides essential rust protection, and the laser-etched part numbers save you a massive headache during assembly or future replacements. Whether you are fine-tuning a daily driver or prepping a dedicated race engine, the heat treatment ensures these play nice with guide plates. It is a professional-grade upgrade that brings real peace of mind to your valvetrain.
Comp Cams 752216 Push Rod
Comp Cams Magnum Series Ford 351 Cleveland Pushrods
- Quality Construction - COMP Cams Magnum Series Pushrods are constructed from a single piece of chromemoly steel with a wall thickness 0.080", ensuring these pushrods withstand high loads for the life of the engine and do not flex.
- Guide Plate Compatible - Magnum Pushrods are all heat-treated before they leave our facility, guaranteeing that using them with guideplates will not ruin them prematurely.
- High Quality, Long Lasting Finish - Magnum Series Pushrods are all finished with a black oxide coating, ensuring the the chromemoly steel will not rust or wear prematurely. Additionally, we laser etch our pushrods with the part number, making it easy to order replacements.
- Race Ready - Quality and precision manufactured from start to finish, these pushrods are at home in both daily driven street vehicles, as well as racing applications. The Magnum Series is a great upgrade from our High Energy line, especially if aggressive camshafts and higher load springs are part of your build.
- Application Specific Sets - While we sell our Magnum Series Pushrods from 6.200" to 9.800" long in sets of 16 and individually, we also offer sets custom tailored for your application. COMP Cams has custom Magnum Pushrod Sets for Chevrolet, Chrysler, Ford, Oldsmobile and Pontiac - making ordering our high end pushrods easier than ever!.5/16" and 3/8" - In addition to offering application specific sets, we offer both 5/16" and 3/8" diameter designs: 6.250" to 9.300" in 5/16" and 6.850" to 9.800" in 3/8"..Fits 1970-1974 Ford 351 Cleveland/Cobra Jet (3/8" Diameter).Made in USA
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Amazon.com | 9.68 | Yes | Yes | Yes |
The heavy, solid feel of chromemoly steel tells you immediately that these Magnum Series pushrods aren't your standard lightweight components. Designed specifically for the 1970-1974 Ford 351 Cleveland/Cobra Jet, these 3/8" diameter rods feature a beefy 0.080" wall thickness to prevent flexing under high loads. I noticed the black oxide coating provides a professional, rust-resistant finish that looks great in a clean engine bay. Because they are heat-treated, you can run them alongside guide plates without worrying about premature wear. Whether you are tuning a daily driver or prepping a dedicated race engine with aggressive camshafts, the precision manufacturing and laser-etched part numbers make these a reliable, high-end upgrade over the basic High Energy line.
COMP Cams (975-1) .953" O.D. Single Inner Valve Spring
Comp Cams Single Inner Valve Spring
- .953 inches outside diameter, .697 inside diameter single inner valve spring
- 55 pounds 1.500 inches seat load and 127 pounds 1.000 inches open load capacity
- Inner valve spring only
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| JEGS | 9.75 | No | No | No |
Precision engine builders demanding specific spring rates for dual-spring setups will find this Comp Cams inner spring indispensable. This isn't a standalone solution for a standard setup, but rather a critical component for those managing complex valve train geometry. With a .953-inch outside diameter and a .697-inch inside diameter, it fits perfectly into specialized high-performance configurations. The load characteristics are impressively consistent, providing a 55-pound seat load at 1.500 inches and reaching a 127-pound open load at 1.000 inches. It is a specialized piece of hardware that delivers the exact tension required to maintain stability under high RPMs. If you are rebuilding a performance engine and need to match specific spring pressures, this component offers the reliability expected from a top-tier automotive brand.
A Guide to Selecting the Best Comp Cams Engine Parts
Understanding Camshaft Profiles: Duration and Lift
The two most critical metrics in any camshaft profile are duration and lift. Duration refers to the length of time (measured in degrees of crankshaft rotation) that the valve remains open. High-duration cams are the hallmark of racing engines. They allow for massive air intake at high RPMs but often result in a 'choppy' or aggressive idle. Conversely, low-duration cams are designed for streetability, providing a smooth idle and consistent torque across a wider RPM range. Lift refers to how far the camshaft lobe pushes the valve open. Higher lift increases the volume of air entering the cylinder, but it also increases the stress on your valve train. When selecting a cam, you must ensure your valve springs and pushrods are rated to handle the increased lift to prevent valve float or mechanical interference.
Lobe Separation Angle (LSA) and Power Band
Lobe Separation Angle (LSA) is a frequently misunderstood but vital factor in engine tuning. LSA is the angle between the centerlines of the intake and exhaust lobes. A narrower LSA typically produces a more aggressive idle sound and a concentrated peak of power in a specific RPM range, which is ideal for drag racing. However, a wider LSA provides a broader, more predictable power band and better vacuum, making it the superior choice for street-driven vehicles or cars used for cruising. If you are building an engine intended for versatility, look for a moderate LSA that balances high-end breathing with low-end responsiveness.
Matching the Cam to Your Valvetrain and Cylinder Heads
A camshaft does not operate in a vacuum. It is part of a holistic system. You cannot install a high-lift, long-duration camshaft without evaluating your existing cylinder heads. If your heads have restrictive ports, a high-performance cam will be wasted because the engine cannot breathe deeply enough to take advantage of the extra timing. Furthermore, you must consider your compression ratio. High-performance cams often reduce effective compression due to increased overlap, meaning you may need to increase your static compression ratio to maintain adequate cylinder pressure. Always ensure your rocker arms, lifters, and valve springs are compatible with the specific lobe profile you choose.
Choosing Between Hydraulic and Solid Lifters
The mechanism used to actuate the valves is a major decision point. Hydraulic lifters use oil pressure to automatically take up lash, making them virtually maintenance-free and much quieter. They are the gold standard for street performance and reliability. Solid lifters (mechanical lifters) require manual adjustment of the valve lash and are significantly louder, but they are far more stable at extremely high RPMs. If your goal is to push an engine past 7,000 or 8,000 RPM, solid lifters are often a necessity to prevent the valvetrain from losing synchronization. For almost all street and mild strip applications, hydraulic lifters are the preferred choice due to their ease of use and smoother operation.
Frequently Asked Questions
Quick answers about Comp Cams Engine before you buy.
Our Comp Cams Engine Rankings
Top 10 Comp Cams Engine Brands on Amazon
Share of top-ranked products by brand, from our rankings.
How We Selected These Products
We compared Comp Cams Engine products using product details and customer ratings to identify the best options in the categories..
From that comparison we shortlisted the top 22 Comp Cams Engine for this page..
We aim to help you find the right parts products for your needs and save you time when choosing which Comp Cams Engine to buy.
Comparison Table
Compare the top 22 picks at a glance — select a column to sort.