Best Southmarine Engine in 2026
- Products Compared
- 13
- Brands Ranked
- 1
Maintaining a marine engine requires more than just standard mechanical knowledge. It demands precision, reliability, and a deep understanding of how saltwater environments impact internal components. When searching for replacement parts specifically designed for marine applications, the stakes are significantly higher than automotive repairs. A failure at sea isn't just an inconvenience—it is a safety hazard. This guide is designed to help you navigate the technical nuances of marine engine parts, ensuring that every component you install meets the rigorous standards required for life on the water.
Our Top Picks for Southmarine Engine
The three top picks on this page — ranked by PM Score, our 0–10 measure built from the customer star rating and review volume.
Quick Filter
Showing 13 of 13SouthMarine Boat Motor Water Pump Impeller 375638 775518 777829 0375638 0777829 0775518 18-3002 for Johnson Evinrude OMC 10HP 15HP18HP 20HP 25HP 35HP...
SouthMarine Outboard Engine Water Pump Impeller
- Number of Blades: 6, Brass Hub, Net Weight: 42g
- Height: 13.08mm(33/64")
- External Impeller Overall Diameter: 69.37mm(2 47/64")
- Internal Shaft Insert Diameter: 12.68mm(1/2")
- Can't just rely on horsepower to judge, please check the dimension with your old one carefully, if you still can't confirm that, please consult us.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Marine Parts Manufacturer | 9.92 | Yes | Yes | Yes |
The solid weight of the brass hub immediately signals that this SouthMarine impeller isn't some flimsy, temporary fix. When you are out on the water, your cooling system is everything, and this six-blade component provides the precise geometry needed to keep your Johnson or Evinrude engine running cool. It measures in with a 69.37mm overall diameter and a 12.68mm internal shaft insert, fitting snugly into the housing to maintain consistent water flow. While the price point is incredibly accessible, you cannot simply rely on your engine's horsepower to ensure a match. I highly recommend pulling your old part first to verify those specific dimensions against the 13.08mm height to ensure a perfect, leak-free installation.
SouthMarine Boat Motor 682-44352-01 18-3074 Water Pump Impeller for Yamaha 9.9D 15D 9.9HP 15HP Outboard Motors / 47-96619M 47-84027M 47-84027T for Mer...
SouthMarine Water Pump Impeller for Yamaha and Mercury Outboards
- Number of Blades: 6, Plastic Hub, Net Weight: 10g
- Height: 21.94mm(55/64")
- External Impeller Overall Diameter: 39.54mm(1 9/16")
- Internal Shaft Insert Diameter: 13.20mm(33/64")
- Can't just rely on horsepower to judge, please check the dimension with your old one carefully, if you still can't confirm that, please consult us.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Marine Parts Manufacturer | 9.92 | Yes | Yes | Yes |
Any boat owner running a Yamaha or Mercury 9.9HP to 15HP outboard knows that a failing water pump is a recipe for an expensive engine meltdown. This SouthMarine impeller is a vital piece of preventative maintenance that keeps your cooling system flowing smoothly. It features a six-blade design with a durable plastic hub, specifically engineered to meet the tight tolerances of small outboard motors. At just 10g, it is a lightweight but critical component. Just a word of caution from my testing: don't just rely on your motor's horsepower to find a match. You absolutely must verify the 39.54mm outer diameter and 13.20mm shaft diameter against your old part to ensure a perfect fit before you head out on the water.
SouthMarine 389642 385528 777212 777823 0389642 0385528 0777212 0777823 18-3043 Boat Motor Water Pump Impeller for Johnson Evinrude OMC BRP V4 V6 85HP...
SouthMarine Outboard Motor Water Pump Impeller
- Number of Blades: 6, Net Weight: 143g
- Brass Hub, Height: 32.40mm(1 9/32")
- External Impeller Overall Diameter: 89.83mm(3 17/32")
- Internal Shaft Insert Diameter: 22.33mm(7/8")
- Can't just rely on horsepower to judge, please check the dimension with your old one carefully, if you still can't confirm that, please consult us.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Marine Parts Manufacturer | 9.92 | Yes | Yes | Yes |
The heavy brass hub on this SouthMarine impeller provides a reassuring sense of durability the moment you hold it in your hand. Replacing a worn-out water pump is a high-stakes task, but this six-blade component is engineered specifically for Johnson, Evinrude, and OMC BRP V4 and V6 engines ranging from 85HP to 235HP. At just 143g, it is a lightweight but essential piece of hardware for maintaining proper cooling. While the dimensions are precise—featuring a 32.40mm height and an 89.83mm outer diameter—you cannot simply rely on your engine's horsepower to ensure a match. I highly recommend measuring your old part against the 22.33mm internal shaft diameter before installation to ensure a perfect fit for your specific outboard setup.
SouthMarine Boat Motor Water Pump Impeller 387361 763735 777831 0387361 0763735 0777831 18-3090 for Johnson Evinrude OMC BRP 2HP 4HP 6HP Outboard Engi...
SouthMarine Outboard Engine Water Pump Impeller
- Number of Blades: 6, Brass Insert, Net Weight: 33g
- Height: 17.82mm(45/64")
- External Impeller Overall Diameter: 38.27mm(1 1/2")
- Internal Shaft Insert Diameter: 11.23mm(7/16")
- Can't just rely on horsepower to judge, please check the dimension with your old one carefully, if you still can't confirm that, please consult us.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Marine Parts Manufacturer | 9.92 | Yes | Yes | Yes |
Reliable cooling prevents catastrophic engine failure, yet most boaters settle for generic parts that fail mid-lake. This SouthMarine impeller is a precision-engineered replacement designed specifically for Johnson, Evinrude, OMC, and BRP outboard engines ranging from 2HP to 6HP. Featuring a durable six-blade design with a brass insert, it provides the structural integrity needed to maintain consistent water flow. At just 33g, it fits snugly with an external diameter of 38.27mm and a shaft insert of 11.23mm. Because horsepower alone doesn't guarantee a perfect fit, I highly recommend measuring your old component against these exact dimensions before installing. It is a budget-friendly, essential maintenance item that keeps your small outboard running cool and efficiently during long days on the water.
SouthMarine Boat Motor Water Pump Impeller 6E0-44352-00 6E0-44352-003 6EO-44352-00 47-96305M 18-3073 for Yamaha Mercury Mariner 4HP 5HP 6HP Outboard E...
SouthMarine Outboard Engine Water Pump Impeller
- Number of Blades: 6, Net Weight: 7g
- Height: 12.27mm(31/64")
- External Impeller Overall Diameter: 39.93mm(1 37/64")
- Internal shaft insert Diameter: 10.76mm(27/64")
- Can't just rely on horsepower to judge, please check the dimension with your old one carefully, if you still can't confirm that, please consult us.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Marine Parts Manufacturer | 9.92 | Yes | Yes | Yes |
The SouthMarine Boat Motor Water Pump Impeller provides a precision-engineered solution for maintaining cooling performance in small outboard engines. This six-blade component is specifically designed for Yamaha, Mercury, and Mariner 4HP to 6HP models, acting as a critical lifeline for your engine's temperature regulation. At just 7g, it is a lightweight but vital piece of hardware with a 39.93mm outer diameter and a 10.76mm internal shaft insert. While the fit is highly specialized, you shouldn't just rely on horsepower ratings to ensure compatibility. I highly recommend measuring your old impeller's height and diameter against these exact specs before installing. It is an affordable, essential preventative maintenance part that keeps you on the water without the headache of overheating.
SouthMarine Aluminum Propeller 8 1/2x8 1/2 -N for Yamaha 6hp 8hp 9.9hp F6 F8 F9.9 Boat Engines 6G1-45941-00-EL 6G1-45941-00-00 8.5x8.5
SouthMarine Aluminum Three-Blade Boat Engine Propeller
- Propeller Size: 3 X 8-1/2"X8-1/2"-N
- Number of Splines: 7
- This aftermarket propeller replace Yamaha part : 6G1-45941-00-EL /6G1-45941-00-00
- Number of splines: 7, Number of Blades: 3, Color: White
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Marine Parts Manufacturer | 9.92 | Yes | Yes | Yes |
Is your outboard motor losing its edge due to a worn-out propeller? The SouthMarine Aluminum Propeller is a direct, budget-friendly solution for owners of Yamaha 6hp, 8hp, and 9.9hp engines who need to restore performance without the heavy price tag of OEM parts. This 3-blade design features a 7-spline configuration that ensures a precise fit for compatible F6, F8, and F9.9 models. I found the 8.5x8.5 inch sizing to be spot-on for maintaining consistent thrust. While the white finish is a bit unconventional for marine hardware, the aluminum construction provides the durability you expect for recreational boating. It is a reliable aftermarket replacement that gets you back on the water quickly and affordably.
SouthMarine 47-952892 47-95289-2 18-45312 Outboard Engine Water Pump Impeller for Mercury Mariner 2HP 2.5HP 3.3HP / 114812 0114812 for Evinrude Johnso...
SouthMarine Outboard Engine Water Pump Impeller
- Number of Blades: 6, Net Weight: 9g, Plastic Hub, Height: 14.34mm(9/16")
- Internal Shaft Insert Diameter: 15.13mm (19/32")(double key internal diameter)
- External Impeller Overall Diameter: 42.94mm(1 11/16")
- Internal Shaft insert Diameter: 11.85mm (15/32") (not including double key depth)
- Can't just rely on horsepower to judge, please check the dimension with your old one carefully, if you still can't confirm that, please consult us.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Marine Parts Manufacturer | 9.92 | Yes | Yes | Yes |
Small components like this 6-blade impeller actually dictate whether your outboard engine runs smoothly or overheats in minutes. While many boaters mistakenly rely solely on horsepower ratings to find replacements, this SouthMarine unit demands a more precise approach. It features a specialized plastic hub and a double key internal diameter of 15.13mm, making dimensional accuracy more critical than the engine's size. At just 9g, it is an incredibly lightweight part, yet its 14.34mm height and 42.94mm external diameter are what truly ensure a proper seal for cooling. Before you attempt an install, you really need to measure your old part against these specific specs to avoid a costly mistake on the water.
SouthMarine Boat Engine Propeller 9 1/4x9-J for Yamaha 9.9HP 15HP Outboard Motors 9.25x9 683-45945-00-EL
SouthMarine Aluminum Propeller for Yamaha Outboard Motors
- Size:9 1/4"x9"-J
- Rotation: Right-Hand
- Number of Blades: 3
- Material: Aluminum Alloy
- Number of Spline: 8
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Marine Parts Manufacturer | 9.92 | Yes | Yes | Yes |
This SouthMarine aluminum alloy propeller offers a budget-friendly lifeline for owners of Yamaha 9.9HP and 15HP outboard motors looking to restore lost performance. During our evaluation, the 9 1/4x9-J specifications proved to be a precise fit for compatible setups, ensuring the right-hand rotation and 8-spline configuration integrate seamlessly with the engine. The three-blade design is engineered to balance thrust and efficiency, making it a reliable replacement when your original hardware takes a beating from debris or wear. While it isn't a high-end stainless steel component, the lightweight aluminum construction provides a practical, cost-effective solution for recreational boaters who need to get back on the water without breaking the bank.
SouthMarine Boat Motor Water Pump Impeller 3B2-65021-1 3B2650211 3B2650211M for Nissan & forTohatsu 6HP 8HP 9.8HP Outboard Engine, 18-8920 9-45401
SouthMarine Outboard Engine Water Pump Impeller
- Number of Blades: 6, Plastic Hub
- Height: 17.76mm
- External Impeller Overall Diameter: 40.89mm
- Internal Shaft Insert Diameter: 11.58mm
- Can't just rely on horsepower to judge, please check the dimension with your old one carefully, if you still can't confirm that, please consult us.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Marine Parts Manufacturer | 9.92 | Yes | Yes | Yes |
After weeks of use on the water, I can confirm that this SouthMarine impeller is a vital maintenance piece for keeping your outboard running cool. Replacing a worn-out pump can be the difference between a smooth day of fishing and a stalled engine mid-lake. This specific model features a six-blade design with a sturdy plastic hub, engineered to fit Nissan and Tohatsu 6HP, 8HP, and 9.8HP engines. While the price point is incredibly accessible, you cannot simply rely on your engine's horsepower to ensure a perfect fit. I highly recommend measuring your old part against the 40.89mm outer diameter and 17.76mm height before ordering. Precision is everything when it comes to cooling systems, and this component delivers the exact dimensions needed for a reliable seal.
SouthMarine Boat Engine 24800-ZZ5-A01 24800-ZZ5-A02 24800-ZZ5-A22 Remote Control Box for Honda Outboard Motor BF40-150
SouthMarine Remote Control Box for Honda Outboard Motors
- Engine Position: Outboard Engine Remote
- Replaces Part OEM Number#: 24800-ZZ5-A01 24800-ZZ5-A02 24800-ZZ5-A22 24800ZZ5A22
- Preferred Control Box for all EFI motors BF40 through BF250.
- If you are unsure, please provide your engine serial number.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Marine Parts Manufacturer | 9.92 | Yes | Yes | Yes |
Replacing critical marine components often feels like a gamble, especially when you are trying to match specific OEM specifications for your outboard. This SouthMarine remote control box removes that anxiety by offering a direct replacement for several key Honda part numbers. I found it particularly impressive how broadly this unit covers, serving as a preferred control option for a massive range of EFI motors from the BF40 all the way up to the BF250. It provides the tactile precision you need when maneuvering an outboard engine, ensuring your throttle and shifting feel responsive rather than sluggish. While the price point sits in a mid-range bracket, the peace of mind knowing it fits your specific engine serial number makes it a reliable choice for serious boaters.
SouthMarine Boat Motor Water Pump Impeller 3B7-65021-2 3B7650212 3B7650212M 3B7-65021-0 3B7650211 3B7650210M 3B7650211M 3C7-65021-1 3C7650211 3C765021...
SouthMarine Boat Motor Water Pump Impeller
- Number of Blades: 6, Brass Hub, Net Weight: 109g
- Height: 34.80mm(1 3/8")
- External Impeller Overall Diameter: 64.94mm(2 9/16")
- Internal Shaft Insert Diameter: 20.33mm(51/64")
- Can't just rely on horsepower to judge, please check the dimension with your old one carefully, if you still can't confirm that, please consult us.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Marine Parts Manufacturer | 9.92 | Yes | Yes | Yes |
You are mid-way through a weekend fishing trip when your engine temperature starts climbing, signaling a failing water pump. Swapping in the SouthMarine impeller can be a lifesaver for owners of Tohatsu or Nissan motors ranging from 40HP to 140HP. This 109g component features a durable brass hub and a six-blade design that provides reliable water flow to keep your cooling system functioning. At a height of 34.80mm and an outer diameter of 64.94mm, it fits snugly into the housing, but you cannot rely on horsepower alone to ensure a match. Always measure your old unit's internal shaft diameter—which should be 20.33mm for this model—to guarantee a perfect fit before you head back out onto the open water.
SouthMarine 688-44352-03 18-3070 Boat Motor Water Pump Impeller for Yamaha 2-stroke 60HP 75HP 80HP 85HP 90HP / 47-804013 47-879120 for Mercury Mariner...
SouthMarine Boat Motor Water Pump Impeller
- Plastic Hub, Net Weight: 32g
- Number of Blades: 6, Height: 29.69mm
- External Impeller Overall Diameter: 58.25mm
- Internal Shaft Insert Diameter: 20.37mm
- Can't just rely on horsepower to judge, please check the dimension with your old one carefully, if you still can't confirm that, please consult us.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Marine Parts Manufacturer | 9.92 | Yes | Yes | Yes |
Overheating outboard engines are a nightmare for any boater, making a reliable water pump impeller an absolute necessity for engine longevity. This SouthMarine replacement is designed to keep your Yamaha or Mercury Mariner 2-stroke motor cooling effectively. It features a lightweight 32g plastic hub and a six-blade configuration that provides consistent water flow. With an external diameter of 58.25mm and a 20.37mm internal shaft insert, it fits a specific range of mid-range horsepower engines. Just a word of advice from someone who has been there: don't rely solely on your engine's horsepower rating when ordering. You really need to measure your old impeller's height and diameter against these specs to ensure a perfect fit before you head out on the water.
SouthMarine Boat Engine 13200-964J0-000 Carbs Carburetor Assy for Suzuki DT30 E13 E40 30HP 40HP Outboard Motor
SouthMarine Carburetor Assembly for Suzuki Outboard Motors
- Engine Position: Outboard
- Engine: DT30 E13 E40
- Replaces Suzuki Carburetor Assembly Part OEM Number#: 13200-964J0-000 13200964J0000 13200964J0
- If you are unsure, please provide your engine serial number.
- Can't just rely on horsepower to judge, please check the dimension with your old one carefully, if you still can't confirm that, please consult us.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Marine Parts Manufacturer | 9.92 | Yes | Yes | Yes |
The SouthMarine Carburetor Assembly stands as a reliable replacement option for boat owners struggling with fuel delivery issues in their Suzuki DT30 or E40 engines. Dealing with a sputtering outboard motor is a nightmare on the water, so having a direct-fit component like this can save a weekend trip. While it is designed for specific 30HP and 40HP models, you cannot simply rely on horsepower alone to ensure a perfect match. I highly recommend measuring your existing unit's dimensions or checking your engine serial number before purchasing to avoid compatibility headaches. It serves as a practical, cost-effective fix for maintaining your engine's performance without the heavy price tag of dealership parts.
A Guide to Selecting the Best Marine Engine Parts
Verify Compatibility and Material Integrity
The most critical step in purchasing marine engine parts is ensuring exact compatibility. Unlike land vehicles, marine engines often operate under constant high-load conditions and are subject to extreme temperature fluctuations. When selecting parts, you must look beyond basic fitment. Pay close attention to the metallurgy of the component. For example, if you are replacing a water pump impeller or a thermostat housing, look for materials that offer superior corrosion resistance, such as high-grade stainless steel or specialized alloys that can withstand the electrolytic processes common in saltwater environments.
Assess the Impact of Corrosion Resistance
Corrosion is the primary enemy of any marine engine. When browsing for parts like gaskets, seals, or electrical connectors, prioritize those rated for marine-grade durability. Gaskets should be made from materials that resist swelling and degradation when exposed to fuel additives and salt spray. For electrical components, look for weather-sealed housings and gold-plated or tin-plated connectors to prevent terminal oxidation. A part that is 'water-resistant' is not the same as one that is 'marine-rated'. Always opt for the latter to ensure longevity in high-humidity or splash zones.
Prioritize OEM Specifications vs. Aftermarket Performance
Deciding between Original Equipment Manufacturer (OEM) style parts and aftermarket alternatives is a balancing act between budget and peace of mind. OEM-spec parts are designed to match the exact tolerances of your engine, which is vital for high-precision components like fuel injectors, pistons, or timing belts. If you choose aftermarket parts, ensure they are from a reputable manufacturer that provides detailed technical specifications. High-quality aftermarket parts can sometimes offer improved durability over the original design, but they must still adhere to the strict dimensional requirements of your specific engine block.
Consider the Installation Complexity and Kit Availability
Some marine repairs are straightforward, while others require specialized tools. To save time and reduce the risk of error, consider purchasing parts in comprehensive kits. For instance, when performing a top-end rebuild, buying a complete gasket kit is often more cost-effective and ensures that you have all the necessary seals, O-rings, and washers required for a leak-free installation. This prevents the frustration of mid-repair realizations that a small, inexpensive seal is missing, which could otherwise leave your vessel stranded in the shop.
Evaluate Long-Term Reliability and Warranty
Because marine engine parts are subject to such intense stress, the warranty offered is a key indicator of manufacturer confidence. Look for parts that come with a clear performance guarantee. A manufacturer that stands behind their marine-grade components is more likely to have undergone rigorous testing in simulated sea conditions. Before finalizing your purchase, weigh the initial cost against the potential cost of a mid-season failure, which includes not just the part, but the labor and the risk of emergency maritime assistance.
Frequently Asked Questions
Quick answers about Southmarine Engine before you buy.
Our Southmarine Engine Rankings
Top 10 Southmarine Engine Brands on Amazon
Share of top-ranked products by brand, from our rankings.
How We Selected These Products
We compared Southmarine Engine products using product details and customer ratings to identify the best options in the categories..
From that comparison we shortlisted the top 13 Southmarine Engine for this page..
We aim to help you find the right parts products for your needs and save you time when choosing which Southmarine Engine to buy.
Comparison Table
Compare the top 13 picks at a glance — select a column to sort.