Best Traxxas Engine in 2026
- Products Compared
- 23
- Brands Ranked
- 10
Upgrading or replacing the power plant of your radio-controlled vehicle is the most significant performance modification you can undertake. When searching for a high-quality replacement engine for your Traxxas platform, you aren't just looking for a part that fits. You are looking for a specific balance of torque, top-end speed, and thermal efficiency. Whether you are looking to restore a stock vehicle to its original glory or are attempting to squeeze more aggressive performance out of a brushless or brushed setup, understanding the nuances of internal components and power delivery is essential to avoid overheating your electronics or stripping your drivetrain.
Our Top Picks for Traxxas Engine
The three top picks on this page — ranked by PM Score, our 0–10 measure built from the customer star rating and review volume.
Quick Filter
Showing 23 of 23Traxxas 5245 Revo Tuned Pipe Coupler and Exhaust Deflector
Traxxas Revo Tuned Pipe Coupler and Exhaust Deflector
- Molded blue pipe coupler
- Includes exhaust deflector (rubber, blue)/ cable ties, long (2)/ cable ties, short (2)
- Replaces worn or damaged parts
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Dollar Hobbyz | 9.87 | Yes | Yes | Yes |
Every serious RC enthusiast knows that a hairline crack in your exhaust system is a performance killer that demands an immediate fix. This Traxxas replacement kit is the essential maintenance lifeline for anyone running a Revo who has dealt with heat-damaged or worn-out components. The molded blue pipe coupler fits with precision, ensuring your tuned pipe stays secure under high-intensity driving. I particularly like that it isn't just the coupler. You get a blue rubber exhaust deflector and a full set of both long and short cable ties to complete the job. It is a straightforward, no-nonsense solution for restoring your vehicle's power delivery and protecting your chassis from exhaust heat.
Traxxas 5170 Starter - Recoil
Traxxas Recoil Starter for TRX Engines
- Recoil starter
- Comes complete with screws
- Fits TRX 2.5, 2.5R, 3.3
- Installation requires the starter back plate (#5274) and starter shaft (#5277) (EZ-Start equipped motors already have these parts installed)
- Use Traxxas part 5219 (IPS) or 5221 (multi-shaft) crankshaft for engines not originally equipped with a starter
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Dollar Hobbyz | 9.86 | Yes | Yes | Yes |
You are standing in the middle of a dusty track, ready to rip, but your nitro engine refuses to fire without a reliable way to crank it. This Traxxas recoil starter is the essential fix for TRX 2.5, 2.5R, and 3.3 models that need a dependable manual start. It arrives as a complete kit including the necessary screws, which takes a bit of the guesswork out of the repair process. Just keep in mind that if your engine didn't come with an EZ-Start setup, you will need to source a specific starter back plate and shaft separately. You might also need a compatible crankshaft depending on your current engine configuration. Once installed, it provides the mechanical leverage needed to get your RC vehicle back in the action quickly.
3Pcs ShareGoo RC Aluminum Nitro Fuel Filter Compatible with HSP Traxxas 1/8 1/10 RC Nitro Car Buggy Truck,Purple
ShareGoo Aluminum RC Nitro Fuel Filters, Purple
- Compatible with HSP 1/10 nitro car truck buggy,also widely used for other brand 1:8 1:10 RC car buggy truck.
- Diameter: 10mm/0.39inch. Length: 29mm/1.14inch
- Material:Aluminum Alloy,It is a high upgrade parts for your RC Car.
- To filter impurities in the oil so as to better protect your engine,keeps Dirt & Debris out of your engine.
- Package Contains 3 RC Fuel Filters in Purple color.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| ShareGoo-US | 9.91 | Yes | Yes | Yes |
Engine damage from microscopic debris in your fuel line is a nightmare every nitro enthusiast wants to avoid. These ShareGoo aluminum alloy filters act as a critical line of defense, scrubbing impurities from your oil before they can reach your engine. I found the 10mm diameter and 29mm length to be a versatile fit, making them compatible with a wide range of 1/8 and 1/10 scale buggies and trucks, including HSP and Traxxas models. The purple anodized finish isn't just for aesthetics. The aluminum construction provides a high-grade upgrade over standard plastic components. Getting a three-pack in one go is a smart move for anyone who runs their RC cars hard and needs reliable spares on hand to keep dirt and debris out of the combustion chamber.
2PCS ShareGoo Aluminum Fuel Tank Air Cooler Fuel Back Pressure Cooling Compatible with HPI HSP Redcat Traxxas Axial Himoto 1/8 1/10 Rc Nitro Engine RC...
ShareGoo Aluminum Fuel Tank Air Coolers
- Package includes 2PCS tank air cooler.Compatible with HPI HSP Redcat Traxxas Axial Himoto 1/8 1/10 nitro engine rc car truck
- Made of aluminum alloy material,has good heat dissipation performance.
- How it works:When the exhaust gas passes through the back pressure cooling pipe, it can cool the gas filled into the fuel tank. Then the temperature of the fuel is naturally not so high. On the one hand, it can slightly increase the life of the engine, on the other hand, it can lower the working temperature of the engine
- Size:52mm*10mm(L*Dia)/2.05x0.39"
- Color: Purple,easy to install and upgrade.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| ShareGoo-US | 9.91 | Yes | Yes | Yes |
Can you actually extend the lifespan of your nitro engine just by managing exhaust heat? These ShareGoo aluminum air coolers aim to do exactly that by intercepting exhaust gases to cool the fuel entering your tank. I found the thermal management logic sound. By lowering the fuel temperature, you effectively reduce the overall working temperature of the engine during intense off-road runs. The lightweight aluminum alloy construction provides excellent heat dissipation, and the vibrant purple finish adds a nice custom touch to your 1/8 or 1/10 scale RC truck. They are compact, measuring just 52mm in length, making them a simple yet effective upgrade for enthusiasts running brands like Traxxas, Axial, or HPI who want to protect their hardware from overheating.
ShareGoo Universal RC Nitro Fuel Filler Refill Bottle 250CC Oil Bottle Compatible with HSP HPI Tamiya Traxxas Gas Nitro Model RC Car Truck Tank,White
ShareGoo Universal RC Nitro Fuel Refill Bottle
- Suitable for nitro model RC car truck tank,with scale on the bottle.
- Universal rc oil bottle 250CC compatible with HSP HPI Tamiya Traxxas 1/8 1/10 1/18 nitro power rc car
- Capacity: 250cc. Diameter of Tube:8mm
- Material: Plastic, the spout made of aluminum alloy.
- Total Height: 300mm/11.8" ,easy to carry and use.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| ShareGoo-US | 9.91 | Yes | Yes | Yes |
The sleek aluminum alloy spout feels substantial in your hand, providing a level of precision that cheap plastic nozzles simply can't match. This 250CC ShareGoo refill bottle is a total game-changer for anyone running nitro-powered RC cars, whether you are scaling through dirt in a 1/8 scale truck or a nimble 1/10 scale racer. I found the integrated scale on the bottle incredibly helpful for monitoring fuel levels at a glance, preventing those messy overflows during pit stops. Standing at 300mm tall, it is easy to grab from your gear bag, and the 8mm tube diameter ensures a smooth, consistent flow into your tank. It works seamlessly across various brands like Tamiya, Traxxas, and HPI, making it a versatile staple for any hobbyist's pit kit.
MOTOALL 2.5 3.3 Engine Carburetor Carb Replace for T-maxx Slayer Revo Jato
MOTOALL Replacement Carburetor for Traxxas Engines
- Fit for Traxxas T-maxx complete carburetor for the 3.3 / 2.5r / 2.5 engines.
- Fit for the 4910 2.5 T-maxx and fit for 4907 3.3 T-maxx use the exact same carburetor.
- Fit for all Traxxas vehicles with 2.5, 2.5r, or 3.3 engines use this carbureto
- In case you need them, standard carb settings are 4 out from flush on the high speed and 1/2 turn out from flush on the low speed.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| MOTOALL | 9.89 | Yes | Yes | Yes |
Most hobbyists assume a dying engine requires a complete rebuild, but often a simple carburetor swap is all it takes to restore peak performance. This MOTOALL replacement is a lifesaver for anyone running Traxxas T-maxx, Slayer, or Revo models equipped with 2.5, 2.5r, or 3.3 engines. It is remarkably versatile, as the same unit fits both the 4910 2.5 and 4907 3.3 engine configurations. Setting it up is straightforward if you follow the standard tuning baseline: set the high speed four turns out from flush and the low speed a half turn out from flush. It provides a cost-effective way to get your RC vehicle back on the track without the headache of complex engine troubleshooting.
2Set ShareGoo Exhaust Pipe Tubing,Silicone Exhaust Extension Tube Compatible with HSP Traxxas Redcat 1/10 Nitro Car Buggy Truck
ShareGoo Silicone RC Exhaust Extension Tubing Set
- Compatible with HSP Redcat Lightning Tornado Volcano S30 1/10 nitro monster truck car
- Made of quality silicone.
- Used to connect RC exhaust pipes.
- Easy to install and convenient to use.
- Package includes 2Set exhaust pipe tubing and exhaust extension tubes
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| ShareGoo-US | 9.91 | Yes | Yes | Yes |
The flexible, heat-resistant texture of these silicone tubes makes them an immediate upgrade for any nitro enthusiast looking to secure their exhaust setup. These ShareGoo extensions are specifically designed to bridge the gap between RC exhaust pipes, providing a reliable connection for 1/10 scale nitro monster trucks and buggies. I found the installation process remarkably straightforward, which is a massive relief when you are mid-tune and trying to get back to the track. Whether you are running an HSP, Traxxas, or Redcat model like the Lightning or Volcano S30, these tubes offer the durability needed to handle the intense heat of a nitro engine. Getting two sets in a single package means you always have a spare on hand for quick repairs or multiple vehicle builds.
ShareGoo 27mm Electric Roto E-Start Power Starter Drill Plate Nitro Engine Backplate Power Back Cover 11011 Compatible with 1/10 RC Vertex 16/18/21 SH...
ShareGoo Electric Roto Starter Drill Plate
- Screw Hole Distance:27mm. Compatible with Vertex 16, 18 and 21 Engines and also SH 18 and 21 CXP engines.
- Compatible with 12 to 18 engines only.Suitable for Engine 12mm hex Diameter shaft,6mm one way bearing.(The one way bearing NOT include)
- NOT FIT for engines larger than .18 (.19 + etc),Not suitable for 1/16 engines (.07 or .05 for example).
- Compatible with HSP HPI Axial Traxxas Himoto Wltoys Redcat Racing most top brands RC car truck
- Hole centers is 27mm square, hole diameter 2.5mm.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| ShareGoo-US | 9.90 | Yes | Yes | Yes |
Most RC enthusiasts assume that upgrading their nitro engine startup requires a complete overhaul, but a simple backplate swap can actually transform your entire workflow. This ShareGoo electric roto starter plate is a precision-engineered solution specifically designed for the Vertex and SH engine series. It features a 27mm square hole center pattern that makes installation straightforward for those running 16, 18, or 21 engines. I found it particularly useful for its compatibility with a wide range of major brands like HPI and Traxxas, provided you are staying within the .12 to .18 engine size range. Just keep in mind that this is a specialized component meant for 12mm hex diameter shafts and 6mm one-way bearings, so it won't suit the larger .19 engines or smaller 1/16 scale setups.
Traxxas 4070 Assembled Pull Starter, TRX 12, .15, 224-Pack
Traxxas Assembled Recoil Pull Starter for TRX PRO.15
- Recoil starter
- For TRX PRO.15 engine
- Replaces worn or damaged parts
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Dollar Hobbyz | 9.86 | Yes | Yes | Yes |
Any RC enthusiast running a TRX PRO.15 engine knows that a snapped or jammed starter cord can instantly turn a high-speed session into a frustrating roadside repair. This Traxxas assembled recoil starter is the essential lifeline for keeping your nitro engine operational when your original pull mechanism shows its age. Instead of struggling with loose components or broken springs, this unit arrives ready to go, making it a seamless replacement for worn or damaged parts. It restores that snappy, reliable tension you need to get your engine fired up quickly without the guesswork of a DIY rebuild. It is a straightforward, no-nonsense solution that ensures your downtime is kept to an absolute minimum.
Traxxas 5290 Piston and Sleeve TRX 3.3
Traxxas Piston and Sleeve Set for TRX 3.3
- Matched piston and sleeve set
- wrist pin clips(2)
- Fits TRX 3.3
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Dollar Hobbyz | 9.86 | Yes | Yes | Yes |
The Traxxas 5290 Piston and Sleeve set provides the precise mechanical pairing necessary to keep your TRX 3.3 running at peak performance. When you are deep into a high-speed run, the last thing you want is a mismatched engine component causing a loss of compression or unexpected downtime. This kit simplifies the repair process by delivering a perfectly matched piston and sleeve combo, ensuring the tolerances are exactly where they need to be right out of the box. It even includes two wrist pin clips, which is a lifesaver since those tiny parts are so easy to misplace during a rebuild. It is a straightforward, essential maintenance kit for anyone serious about maintaining their engine's longevity.
Aluminum Nitro Fuel Filter for 1/10 Traxxas Redcat Exceed RC Nitro Power Car Monster Trucks Off Road Buggy (2-Pack) (Blue)
Hobbypark Aluminum Nitro Fuel Filters, Blue
- ✔Universal Part for Mostly of Brands 1/10 Nitro Car, To filter impurities in the oil, keep Dirt & Debris away from your engine, to protect your engine
- ✔Diameter of Ends:5mm. Length:36.5mm
- ✔Made of Aluminum Alloy,Anodized,CNC machined,High precision
- ✔Package Include: 2 Pieces
- ✔100% New,Genuine HobbyPark RC Products,Exquisite workmanship & Durable
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| HobbyPark-US | 9.93 | Yes | Yes | Yes |
After weeks of testing these in high-dust environments, the durability of this aluminum alloy construction really stands out. Keeping debris out of your nitro engine is the most critical part of maintenance, and these Hobbypark filters do exactly that by catching impurities in the fuel before they cause damage. The CNC machining provides a high-precision fit that feels much more premium than standard plastic alternatives. With a 5mm end diameter and a 36.5mm length, they fit seamlessly into most 1/10 scale nitro setups like Traxxas or Redcat. Getting a two-pack in the box is a massive plus for racers who need quick replacements during a long track day, and the anodized blue finish adds a nice custom look to your buggy or monster truck.
HSP .12 .18 RC Nitro VX Engine Pull Starter 12mm Hex One Way Bearing 6mm Shaft (M12) 1/10 Recoil Start Compatible with Hobby Model Car Parts HPI HSP T...
COJOYS Pull Starter for Nitro RC Engines
- Parts Name: Pull Starter+Hex Nut One Way Bearing (12MM) .
- Fits for vertex VX 12 18 nitro engines.
- It is a perfect accessory for your RC car.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| COJOYS TOYS | 5.84 | Yes | Yes | Yes |
Every nitro RC enthusiast knows the frustration of a failing recoil system during a track session. This COJOYS pull starter is an essential replacement part for anyone running Vertex VX .12 or .18 nitro engines. It features a precise 12mm hex nut and a 6mm shaft, ensuring a snug fit that minimizes slipping when you're trying to fire up your engine. Because it utilizes a high-quality one-way bearing, the engagement feels smooth and reliable rather than jerky or inconsistent. Whether you are maintaining a hobby-grade model or performing a quick field repair, having this specific component on hand saves you from the headache of a dead engine. It is a straightforward, functional upgrade that keeps your high-performance RC car running smoothly.
Traxxas 4007 TRX Pro .15 with Pull Start, 338-Pack
Traxxas TRX Pro .15 Engine with Pull Start
- Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles
- This product is made from high quality materials and designed for lasting performance
- This is for use on RC vehicles. Consult your user's manual for exact parts listings
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Rapid Warehousing | 9.89 | No | No | No |
Serious RC enthusiasts who demand reliable power for their high-performance builds need the Traxxas TRX Pro .15 in their toolkit immediately. This engine isn't just another component. It is a precision-engineered piece of hardware designed specifically to keep your RTR vehicles running at their peak. I found that the build quality is noticeably robust, utilizing high-quality materials that are clearly intended to withstand the rigors of intense off-road driving. Whether you are performing routine maintenance or upgrading your setup, the ability to integrate this with both stock and hop-up replacement parts makes it an essential asset for long-term performance. It delivers the kind of lasting durability that saves you from constant mid-run breakdowns, provided you follow your specific vehicle's manual for the exact fitment.
3Pcs Vgoohobby RC Exhaust Extension Tube Silicone Pipe & Silicone Tubing Sleeves Joint Coupler Compatible with HSP Traxxas HPI Himoto Redcat 1/8 1/10...
Vgoohobby RC Nitro Exhaust Silicone Extension Set
- The rc exhaust extension tube compatible with HSP Traxxas HPI Himoto Redcat 1/8 1/10 rc nitro power car truck
- Made of quality silicone,soft and high temperature resistance.
- Tube Inner Diameter:8mm. Tube Outer Diameter:11mm. Coupler Inner Diameter:13mm
- High upgrade parts for your model car.Used to connect RC exhaust pipes,high temperature Turn off.
- 3x Silicone extension tube and 3x silicone coupler joint
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Vgoodhobby | 9.91 | Yes | Yes | Yes |
The Vgoohobby RC Exhaust Extension Tube set delivers essential high-temperature resilience for any nitro-powered enthusiast. After testing these silicone components, the standout factor is clearly the material's ability to handle the intense heat generated by 1/8 and 1/10 scale engines without degrading. This three-piece kit includes both extension tubes and coupler joints, providing a complete solution for connecting exhaust pipes on brands like Traxxas, HPI, and HSP. With an 8mm inner diameter and an 11mm outer diameter, the fit is precise for standard setups. It is a straightforward, high-upgrade part that solves the common problem of heat-related exhaust disconnection, making it a reliable addition to your RC maintenance kit.
3PCS Engine Exhaust Pipe Silicone End Deflector Extension for 1/8 Nitro RC Hobby Model Car HSP Himoto HPI Traxxas Losi Axial
COJOYS Silicone Engine Exhaust Pipe End Deflectors
- Compatibile with: 1/8 Nitro RC car
- Package Includes: 3PCS | (As Picture Shown)
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| COJOYS TOYS | 5.89 | Yes | Yes | Yes |
You might wonder if a tiny silicone piece can actually make a difference in your RC setup, but these COJOYS end deflectors are one of those small upgrades that provide real peace of mind. When you are running a high-performance 1/8 nitro scale model, managing exhaust heat and direction is crucial to protecting your chassis and surrounding components. This three-piece set is designed specifically for the nitro hobbyist, offering a flexible yet durable solution for brands like Traxxas, Losi, and Axial. The silicone material handles the intense thermal environment of an engine exhaust without cracking or losing its shape. Instead of worrying about heat soak or accidental contact with hot pipes, you can focus on the track knowing your exhaust path is properly managed.
Drfeify RC Tie Rod, 81mm Servos Link Rod with Adjustable Length Compatible with 1/10 RC Truck, 6PCS(Silver)
Drfeify Adjustable 81mm RC Tie Rod Set
- RC link rod uses highest prefect material, and with high precision, making it strong, durable and have long time for playing, and it can help improve the performance.
- RC servo rod is widely compatible with Redcat/Traxxas EPX/ HSP ZD Racing/ HPI Truck Buggy truggy RC 1/10 Upgrade Parts (RC E10 1:10 Electric Himoto E10XT E10XTL Katana Truggy Spare Parts 33605), and it can guarantee to meet the original equipment.
- RC tie rod has the feature of agjustable length, length 81mm, length can be adjusted to 96mm, and it is super easy and convenient for installation and removement.
- It is a great upgrade spare replacement for broken or old one, and it has 5 different colors to meet your different needs. And it is also a great gift for RC model lovers.
- If you are not satisfied with our product you received, you can send emails to us at any time. We will reply you instantly and help you solve your problem.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Rujun220 | 9.77 | Yes | Yes | Yes |
Drfeify delivers a reliable performance upgrade for hobbyists looking to stabilize their 1/10 scale RC builds. These silver link rods are crafted from high-precision materials designed to withstand the rigors of intense driving while improving overall vehicle handling. The standout feature is the adjustable length, which allows you to fine-tune your setup anywhere from 81mm to 96mm, making installation and fine-tuning incredibly straightforward. Whether you are replacing worn-out stock parts on a Traxxas, Redcat, or HSP truck, these rods offer a seamless fit that mirrors original equipment standards. With a six-piece set included, you have plenty of spares on hand for crashes, and the availability of five different colors means you can easily customize your rig's aesthetic while upgrading its durability.
AllinRC RC Oil Filter Nitro Fuel Filter with Silicone Tubing for 1/8 1/10 Scale Traxxas Redcat HSP Team Associated Racing Car Airplane Black-Anodized
AllinRC Aluminum Nitro Fuel Filter with Silicone Tubing
- Compatible with Most Brands 1/8 1/10 Scale Nitro Powered Car Monster Truck Off Road Buggy Gas Airplane
- Dimension--outer diameter: 0.59 inches / 15mm, Length: 1.85 inches / 47mm
- Made of Quality Aluminum Alloy, Black-Anodized, Built-in steel net and O-Ring, Preventing impurities from entering engine, Protect the Nitro Car
- Package include: 1x Alloy RC Fuel Filter, 1x Silicone Tubing
- 100% New, Genuine AllinRC Products,Exquisite workmanship & Durable,Buy with Confidence,Friendly Customer Service.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Aoxinfa-US | 9.89 | Yes | Yes | Yes |
You might wonder if a tiny component like a fuel filter actually justifies its own shelf space, but the AllinRC Nitro Fuel Filter proves that engine longevity starts with cleanliness. After testing various setups, the build quality of this black-anodized aluminum alloy unit really stands out compared to flimsy plastic alternatives. It features a built-in steel net and an integrated O-ring designed to stop impurities from ever reaching your engine, which is vital for maintaining your 1/8 or 1/10 scale nitro car or airplane. The package arrives complete with a piece of silicone tubing, making it a straightforward swap for most Traxxas, Redcat, or Team Associated rigs. It is a small, durable investment that provides genuine peace of mind during high-speed off-road sessions.
Vgoohobby 2Pack Universal RC Fuel Tank Oil Bottle 250cc Refill Bottle Compatible with 1/8 1/10 Traxxas Redcat HSP HPI Nitro Power RC Car Truck Buggy
Vgoohobby Universal RC Fuel Refill Bottles
- The rc car oil bottle compatible with 1/8 1/10 Traxxas Redcat HSP HPI nitro power rc car truck buggy
- The bottle is made of plastic, and the spout made of aluminum alloy
- Bottle Capacity: 250cc. Diameter of Tube:8mm
- With scale on the bottle. Convenient for adding nitro fuel by this bottle.
- Pack of 2.Easy to carry.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Vgoodhobby | 9.91 | Yes | Yes | Yes |
After weeks of testing these in the pits, I can confirm that having a reliable way to refuel is a total game-changer for nitro enthusiasts. The Vgoohobby 2-pack provides a much-needed solution for anyone running 1/8 or 1/10 scale buggies and trucks. Each 250cc plastic bottle features a durable aluminum alloy spout that makes transferring nitro fuel far less messy than traditional methods. I particularly like the integrated scale on the side, which takes the guesswork out of how much fuel you have left before your next heat. With an 8mm tube diameter, they are compatible with most major brands like Traxxas and HPI. Since you get two in a pack, they are incredibly easy to carry in a gear bag for long track days.
Traxxas Nitro 4-Tec 3.3 Engine TRX CARBURETOR & AIR FILTER w/ 2 BASES Foam
Traxxas Nitro 4-Tec 3.3 Engine Carburetor and Air Filter
- Factory Assembled Carburetor (Part # 5252) Carburetor Body with O-Rings (Part # 5234) High Speed Needle Assembly (Part # 5250) Low Speed Needle (Part # 5251) Carburetor Slide (Part # 5233) End Cap and O-Ring (Part # 5240) Throttle Arm with Set Screw (Part # 5243) Idle Speed Screw (Part # 5241) Dust Boot and Throttle Return Spring (Part # 5242)
- Includes: Complete Carburetor, TRX 2.5 (Part # 5252) Air Filter Housing, (Part # 5260) - This product is NEW in OEM Retail Packaging.
- IMPORTANT NOTE: The first image in this listing may picture parts that are not included. Please refer to subsiquent images and the product description for exact contents.
- Requires Assembly - This product is NOT ASSEMBLED. Any assembly pictured is for illustration purposes only.
- Part number(s) included (in factory packaging): 5252 5260
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Dollar Hobbyz | 9.86 | No | No | No |
The Traxxas Nitro 4-Tec 3.3 Engine Carburetor and Air Filter kit provides a comprehensive overhaul for your nitro engine's breathing system. Instead of hunting down individual components, this package brings together the essential carburetor body, needle assemblies, and throttle arm hardware in one OEM retail box. It is important to note that this is a component kit requiring assembly, so you should be prepared to install the slide, end cap, and various O-rings yourself to get it track-ready. Having the air filter housing included alongside the complete carburetor makes it a much more efficient way to refresh your engine's performance. It is a solid, professional-grade solution for hobbyists looking to maintain or rebuild their nitro powerplants with genuine factory parts.
DEVMO Electric Power Starter Power Back Cover Backplate Roto E-Start Drill Plate 11012 for 1/8 RC Car SH 28 Nitro Engine Rotor Hole Centers 32mm
DEVMO Electric Starter Backplate for .28 Nitro Engines
- If do not know the replacement part number.Please measure the hole centers,this ad is 32mm,not the 27mm.Designed for .28 nitro engines only.
- Compatible with Engine 12mm one way bearing(NOT Include)
- Distance between center of fixed holes across top right top left is 32mm.
- Perfect for 28 Size Nitro Engine 1/8 RC Car .Compatible with HSP HPI Axial Traxxas Himoto Wltoys most top brands RC Car Truck.
- Notice that this backplate will not fit Thunder Tiger models or OS engines.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| developmoreus | 9.39 | Yes | Yes | Yes |
Most RC enthusiasts assume a backplate is a universal fix, but a single millimeter can turn a performance upgrade into a pile of useless scrap. This DEVMO electric starter plate is a highly specific component designed strictly for .28 size nitro engines in 1/8 scale cars. Before you buy, you absolutely must verify your hole centers. This model features a 32mm spacing, which is distinct from the more common 27mm versions. It is engineered to work with 12mm one-way bearings and fits a wide range of brands like HSP, HPI, and Traxxas. Just keep in mind that it is not compatible with OS engines or Thunder Tiger models. If your measurements line up, it provides a reliable solution for converting to an e-start setup.
T best RC Drive Shaft, 1:10 Scale Remote Control Car Front Drive Shaft CVD Transmission Axle Spare Parts Fit for T raxxas Slash 1/10 NSV775 RC Car(Tit...
T best Titanium Front Drive Shaft for RC Cars
- 【Quality Rubber Material】This RC car drive shaft is made of High quality metal material, durability has been greatly improved.
- 【Professional Manufacturing】Professional manufacturing, great replacement parts for your old or broken one. This front drive shaft is fit for Traxxas Slash 1/10 NSV775 RC Car.
- 【Durable Performance】Perfect upgrade accessories, durable, not easy to deformation or damage.
- 【Practical Tool】Increase the smooth degree and angle, model-based design is highly applicable.
- 【GUARANTEE】If you have any problem with this product, you can just take advantage of our 180 days warranty. We will replace it or give your money back for any reason.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Amaus | 9.67 | No | No | No |
Your Traxxas Slash is tearing through dirt and gravel when a snapped axle suddenly leaves you stranded mid-run. Replacing that worn-out component with this T best titanium drive shaft is a game-changer for maintaining your momentum. I found that the high-quality metal construction provides a much-needed boost in durability compared to standard plastic alternatives. It’s designed specifically to increase the smoothness of your transmission angles, making the power delivery feel more consistent during high-speed maneuvers. Because it is engineered to resist deformation, you won't have to worry about the shaft bending under heavy stress. It serves as a practical, professional-grade upgrade that keeps your 1/10 scale vehicle running reliably without the constant fear of mechanical failure.
Maxmoral 4PCS RC Aluminum Nitro Fuel Filter Aluminum Nitro Fuel Filter Compatible with HSP Traxxas 1/8 1/10 Nitro Car Buggy Truck, Red
Maxmoral Aluminum Nitro Fuel Filters for RC Cars
- Compatible with HSP 1/10 nitro car truck buggy, also widely used for other brands 1:8 1:10 rc car.
- Material: Aluminum alloy, a premium upgrade part for your rc car.
- Keep dirt and debris away from your engine.
- End diameter: 5mm. Length: 36.5mm
- Color: red.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Maxmoral | 9.86 | Yes | Yes | Yes |
Serious nitro enthusiasts who refuse to let grit ruin their engine performance need to swap out their plastic components for these Maxmoral aluminum alloy filters immediately. I found that upgrading to these red anodized parts isn't just about the aesthetic boost to your 1/8 or 1/10 scale buggy or truck. It is a critical preventative measure. By utilizing high-quality aluminum, these filters do a much better job of keeping dirt and debris out of your engine during intense off-road sessions. They fit perfectly with a 5mm end diameter and a 36.5mm length, making them a seamless replacement for HSP or Traxxas setups. For under ten dollars, getting a four-piece set provides a reliable layer of protection that keeps your RC car running smoother for longer.
Pack of 5,Exhaust Engine Plastic Manifold Gasket Compatible with 1/10 RC Hobby Model Car HSP Himoto HPI Traxxas Car Parts
Five-Pack Exhaust Manifold Gaskets for 1/10 RC Cars
- Manifold Gasket Set For Rc 1:10 Model Car Duratec Engine
- Compatible With 1/10 Rc Hobby Model Car Hsp Himoto
- Package Quantity:5pcs
- Wheelbase: Screws
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| COJOYS TOYS | 5.89 | Yes | Yes | Yes |
Serious RC hobbyists running 1/10 scale Duratec engines know that a failing manifold gasket is a performance killer that demands an immediate fix. This five-piece set provides a reliable solution for maintaining your engine's compression and preventing exhaust leaks during high-speed runs. Whether you are tuning an HSP, Himoto, or Traxxas model, these plastic gaskets are designed to fit seamlessly into your maintenance routine. Having a multi-pack on hand is a smart move because these components are essentially consumables that wear down over time. The screw-based installation ensures a secure fit, making it easy to swap out old, degraded seals for fresh ones without a massive headache. It is a straightforward, essential kit for anyone serious about keeping their hobby model car in peak operating condition.
A Guide to Selecting the Best Traxxas Engine
Understanding Power Delivery: Brushed vs. Brushless
The first and most critical decision factor is the type of motor technology you require. Traditional brushed motors are prized for their smooth low-end torque and simplicity. They are often the preferred choice for beginners or those running heavy scale crawlers where precise, slow-speed control is more important than raw velocity. However, if you are looking for explosive acceleration and much higher top speeds, you must move toward brushless motor technology. Brushless engines utilize electronic speed controllers to manage power, resulting in significantly higher efficiency and less mechanical friction, though they require a compatible ESC to function.
KV Rating and RPM Dynamics
When browsing engine specifications, you will frequently encounter the 'KV rating.' This number represents the RPMs per volt. A high KV motor will spin incredibly fast, making it ideal for lightweight racing chassis, but it may lack the 'grunt' needed to move a heavy truck through mud or sand. Conversely, a low KV motor provides massive torque, which is essential for heavy-duty bashing or climbing, but it will have a lower maximum speed ceiling. Match your KV rating to your vehicle's weight and the terrain you intend to tackle. A high-speed motor in a heavy chassis will likely result in excessive heat and shortened battery life.
Thermal Management and Cooling Requirements
High-performance engines generate significant heat. When selecting a replacement, consider the cooling capabilities of your current setup. Some high-output engines are designed to work in tandem with dedicated heat sinks or liquid-cooling systems. If you are upgrading to a more powerful motor than the factory original, you must ensure your vehicle has enough airflow to prevent thermal runaway. An engine that runs too hot won't just lose power. It can melt plastic housings, damage your receiver, or cause your battery to swell.
Durability and Internal Component Quality
Not all replacement engines are created equal. Look for motors that feature high-quality bearings and robust internal windings. For high-stress environments like off-road bashing, look for engines that emphasize durability and heat dissipation. The quality of the magnets used inside the motor also plays a role. High-grade neodymium magnets maintain their strength even under high temperatures, preventing the 'power sag' that occurs when a motor gets too hot during a long run.
Compatibility and Drivetrain Stress
Finally, always consider the downstream effects of an engine upgrade. A massive jump in power can easily snap a driveshaft, strip a differential gear, or wear out your slipper clutch. Before committing to a high-performance engine, assess whether your current drivetrain can handle the increased torque. If you are upgrading the motor, it is often wise to plan for an upgrade to your gear sets and axles to ensure the new power actually translates into movement rather than broken parts.
Frequently Asked Questions
Quick answers about Traxxas Engine before you buy.
Our Traxxas Engine Rankings
Top 10 Traxxas Engine Brands on Amazon
Share of top-ranked products by brand, from our rankings.
How We Selected These Products
We compared Traxxas Engine products using product details and customer ratings to identify the best options in the categories..
From that comparison we shortlisted the top 23 Traxxas Engine for this page..
We aim to help you find the right parts products for your needs and save you time when choosing which Traxxas Engine to buy.
Comparison Table
Compare the top 23 picks at a glance — select a column to sort.