Best Remflex Exhaust System in 2026
- Products Compared
- 19
- Brands Ranked
- 2
When you upgrade to a high-performance Remflex exhaust system, you aren't just changing the sound of your vehicle. You are fundamentally altering the thermal dynamics and pressure flow of your entire exhaust stream. Unlike traditional rigid metal-to-metal flange connections that rely on heavy-duty bolts and crush washers to create a seal, Remflex technology utilizes a unique, compressible gasket material designed to conform to imperfections in the flange surfaces. Because these gaskets act as the critical seal between your headers, mid-pipes, and mufflers, choosing the wrong specification can lead to exhaust leaks, increased decibel levels, and even potential damage to your engine's performance metrics due to improper backpressure.
Our Top Picks for Remflex Exhaust System
The three top picks on this page — ranked by PM Score, our 0–10 measure built from the customer star rating and review volume.
Quick Filter
Showing 19 of 19Remflex 2008 Round Port Exhaust Header Gasket
Remflex Round Port Exhaust Header Gaskets
- 1-7/8" Diameter Round Port. Chevy V8 - 4.8L, 5.3L, 6.0L LS2 ('99-'08), 5.7L, LS1 LS6 ('97-'08), includes Vortec, Manifold or Headers, 2/Set
- Port configuration comparable to Fel-Pro 1440
- Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite
- Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch
- There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Amazon.com | 9.68 | Yes | Yes | Yes |
The Remflex 2008 Round Port Exhaust Header Gasket solves the headache of warped manifold flanges with its unmatched compressible design. When you're working on a Chevy V8 like the LS1, LS6, or the 4.8L to 6.0L LS series, heat cycles often leave you with uneven gaps that standard gaskets just can't bridge. These gaskets use 100 percent flexible graphite to fill pits and imperfections up to 1/16 inch deep. Because they are 1/8 inch thick and designed to crush by 50 percent, they create a complete seal even on imperfect surfaces. Since there are no rubber binders or composite materials to shrink or harden, you won't find yourself constantly retightening flange bolts as the engine heats up and cools down.
Remflex 1001 Exhaust Gasket for AMC V8 Engine, (Set of 2)
Remflex 1001 Exhaust Gasket Set for AMC V8 Engines
- Matches the Stock Cylinder Head Port. AMC V8 - 304('70-'79), 360('70-'93), 390('70), 401('71-'76), Dog Leg Stock Port, Manifold or Headers, 2/Set
- Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite
- Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch
- The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials. Remflex exhaust gaskets fill those gaps permanently
- There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Amazon.com | 9.68 | Yes | Yes | Yes |
Any AMC V8 enthusiast struggling with persistent exhaust leaks due to warped flanges needs to stop wasting money on traditional gaskets and switch to Remflex immediately. The constant thermal expansion and contraction between aluminum heads and steel manifolds often create stubborn gaps that standard gaskets simply cannot bridge. These 1/8-inch thick graphite gaskets are a game-changer because they are designed to crush by 50 percent, effectively filling pits and imperfections up to 1/16 inch deep. Because they lack rubber binders or composite materials, you won't deal with the typical shrinking or hardening that forces you to constantly retighten your flange bolts. It is a permanent, heavy-duty solution for the 304, 360, 390, and 401 engines that finally addresses the reality of dissimilar metal contraction.
Remflex 8001 Universal Exhaust Gasket, (Set of 2)
Remflex Universal 2-1/2 Inch Exhaust Gasket Set
- 2-1/2" Pipe. Universal 2-1/2” Collector Flange, 3 Bolt Holes, 3-1/32" Bolt Hole Spacing, 2/Set
- Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite
- Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch
- The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials. Remflex exhaust gaskets fill those gaps permanently
- There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Amazon.com | 9.68 | Yes | Yes | Yes |
Remflex has established itself as the gold standard for enthusiasts struggling with persistent exhaust leaks. Standard gaskets often fail when aluminum cylinder heads and steel manifolds expand and contract at different rates, but these 100 percent flexible graphite seals solve that problem entirely. The 1/8 inch thickness is engineered to crush by 50 percent, allowing the material to flow into pits or gaps up to 1/16 inch deep. Because there are no rubber binders or composite materials to harden or shrink over time, you won't find yourself constantly retightening flange bolts. This two-pack provides a permanent, reliable seal for 2-1/2 inch collector flanges, making it an essential fix for warped surfaces that traditional gaskets simply can't handle.
Remflex 6005 Exhaust Collector Gasket for Mopar, (Set of 2)
Remflex Mopar Exhaust Collector Gaskets
- See Part Number 6006 for 2-1/4" Pipe Flange. Mopar Exhaust Collector Gasket 2-1/2" Pipe, 2 Bolt Holes (One slotted) 3-29/32" Bolt Hole Spacing, 2/set
- Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite
- Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch
- The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials. Remflex exhaust gaskets fill those gaps permanently
- There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Amazon.com | 9.68 | Yes | Yes | Yes |
Remflex offers a definitive solution for Mopar owners struggling with exhaust leaks caused by warped flanges. These gaskets solve the common headache of dissimilar material expansion between aluminum heads and steel manifolds by utilizing 100 percent flexible graphite. Unlike traditional composite gaskets that harden or shrink over time, these stay resilient because they lack rubber binders. The 1/8 inch thickness is specifically engineered to crush by 50 percent, allowing the material to flow into pits and gaps up to 1/16 inch deep. This compressibility ensures a permanent seal that eliminates the frustrating cycle of constantly retightening flange bolts. If your exhaust system is leaking due to thermal contraction and expansion, this two-piece set provides the heavy-duty sealing capability required for a reliable repair.
Remflex 3023 Exhaust Gasket for Ford V10 Engine, (Set of 2)
Remflex Exhaust Gaskets for Ford V10 Engines
- 1-1/2" Diameter Round Port. Ford V10 - Triton, 6.8L ('97-'12), 1-1/2" Round Port, Manifold or Headers, 2/Set
- Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite
- Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch
- The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials. Remflex exhaust gaskets fill those gaps permanently
- There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts
- Fit type: Universal Fit
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Amazon.com | 9.68 | Yes | Yes | Yes |
Remflex exhaust gaskets solve the persistent headache of warped manifold flanges on Ford Triton V10 engines by providing a permanent, airtight seal. When you are dealing with the thermal expansion differences between aluminum cylinder heads and steel manifolds, standard gaskets often fail, leaving you with frustrating exhaust leaks. These 1/8-inch thick graphite gaskets are engineered to crush by 50 percent, effectively filling pits and gaps up to 1/16 inch. Because they contain no rubber binders or composite materials, they won't shrink or harden under extreme heat, which means you can stop worrying about constantly retightening your flange bolts. It is a specialized solution for a very specific mechanical problem, making it an essential kit for anyone performing header or manifold work on a 6.8L Triton.
Remflex 6006 Exhaust Collector Gasket for Mopar, (Set of 2)
Remflex Mopar Exhaust Collector Gasket Set
- See Part Number 6005 for 2-1/2" Pipe Flange. Mopar Exhaust Collector Gasket 2-1/4" Pipe, 2 Bolt Holes, 3-1/2" Bolt Hole Spacing, 2/set
- Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite
- Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch
- The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials. Remflex exhaust gaskets fill those gaps permanently
- There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Amazon.com | 9.68 | Yes | Yes | Yes |
After weeks of driving through extreme temperature shifts, I finally realized why my exhaust setup kept leaking. The mismatch between aluminum cylinder heads and steel manifolds is a nightmare for sealing, but these Remflex gaskets actually solve the warping issue. Because they are made of 100 percent flexible graphite with no rubber binders or composites, they don't shrink or harden over time. The standard 1/8 inch thickness is designed to crush by 50 percent, which allows the material to flow into pits or gaps up to 1/16 inch deep. It effectively creates a permanent seal that stays put even as the metal expands and contracts, meaning you can finally stop constantly retightening your flange bolts.
Remflex 2003 Exhaust Header Gasket
Remflex Exhaust Header Gaskets for Chevy V8
- 1-13 inch width x 1-7/8 inch height Square Port. Chevy V8 - BB 396/6.5L, 402/6.6L, 427/7.0L, 454/7.4L ('65-'90), Stock Port, Manifold or Headers, 2/Set
- Port configuration comparable to Fel-Pro 1410
- There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts
- Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Amazon.com | 9.68 | Yes | Yes | Yes |
Most enthusiasts settle for standard composite gaskets that eventually shrink, harden, or fail to bridge the gaps caused by warped flanges. The Remflex 2003 Exhaust Header Gasket changes that dynamic by utilizing 100 percent flexible graphite instead of rubber binders. This thick, highly compressible material is specifically designed to seal completely against both stock manifolds and headers, even when heat cycles have caused the metal to warp. Because there are no binders to degrade under extreme temperatures, you can finally stop the frustrating cycle of constantly retightening your flange bolts. This two-set pack is a perfect fit for Chevy Big Block engines ranging from the 396 to the 454, offering a reliable seal that traditional gaskets simply cannot match.
Remflex 12-001 Exhaust Gasket for Pontiac V8 Engine, (Set of 2)
Remflex Exhaust Gasket Set for Pontiac V8 Engines
- 1-1/8 inch width x 1-3/4 inch height D Shaped Center Ports. Pontiac V8 - 326, 350, 370, 389, 400, 421, 428, 455, Port Match to Head, Manifold or Headers, 2/Set
- 1-3/8 inch width x 1-13-16 inch height Oval End Ports
- There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts
- Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite
- Fit type: Universal Fit
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Amazon.com | 9.68 | Yes | Yes | Yes |
Warped manifold flanges and persistent exhaust leaks are the bane of any Pontiac V8 enthusiast's existence. This Remflex two-piece set addresses that headache directly by utilizing 100 percent flexible graphite rather than traditional rubber binders or composite materials. Because these gaskets lack those hardening agents, they won't shrink or stiffen over time, which means you can finally stop the endless cycle of retightening your flange bolts. The thickness and compressibility of the graphite allow it to fill the gaps created by heat-induced warping, providing a complete seal between the head and your headers or manifolds. Whether you are running a 350 or a 455, these D-shaped and oval end port gaskets offer a reliable, universal fit that actually stays seated.
Remflex 11-001 Exhaust Gasket for Oldsmobile V8 Engine, (Set of 2)
Remflex Exhaust Gaskets for Oldsmobile V8 Engines
- Two 1-1/2 inch width x 1-29/32 inch height Divided Center Ports. Oldsmobile V8 - 260, 307, 330, 350, 350, 400, 403, 425, 455 ('64-'90), Headers Only, 2/Set
- 1-7/16" wide x 1-15/16" high Square End Ports
- There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts
- Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite
- Fit type: Universal Fit
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Amazon.com | 9.68 | Yes | Yes | Yes |
After weeks of use on a high-performance Oldsmobile V8 build, the difference in seal integrity is immediately apparent. These Remflex gaskets solve the persistent headache of warped manifold flanges that typically cause exhaust leaks in older engines. Because they are constructed from 100 percent flexible graphite without any rubber binders or composite materials, they won't shrink or harden as the engine heats up. This unique compressibility allows them to fill the gaps created by heat cycles perfectly. You can finally stop the cycle of constantly retightening your flange bolts, as these stay seated regardless of temperature fluctuations. Whether you are running a 350 or a 455, the thick, pliable material provides a reliable, professional-grade seal that standard gaskets simply cannot match.
Remflex 3028 Exhaust Header Gasket
Remflex Large Square Port Exhaust Header Gaskets
- 1-1/4 inch width x 1-5/8 inch height Large Square Port. Ford V8 - 289-351 Windsor, Large Square Port, (Aftermarket Cylinder Heads - 2" BH Spacing), 2/Set
- For use with Aftermarket Cylinder Heads with 2" Bolt Hole Spacing on each port
- There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts
- Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Amazon.com | 9.68 | Yes | Yes | Yes |
Warped manifold flanges and persistent exhaust leaks are the primary headaches that make traditional gaskets fail on high-performance Ford Windsor engines. The Remflex 3028 solves this by utilizing 100 percent flexible graphite instead of the standard rubber binders or composite materials that typically shrink and harden under extreme heat. Because this material is highly compressible, it fills the uneven gaps caused by thermal warping, creating a complete seal between the head and the header. These gaskets are specifically designed for aftermarket cylinder heads with 2-inch bolt hole spacing and a large square port configuration. Since the graphite won't degrade or lose its shape over time, you can finally stop worrying about the constant need to go back and retighten your flange bolts after every heat cycle.
Remflex 10-001 Exhaust Gasket for Jeep 4.0L Engine
Remflex Exhaust Gasket for Jeep 4.0L Engines
- Remflex’s unique flexible graphite material has been proven for more than 30 years
- 4.0L (1990-1998) plus (Cherokee, Comanche and Wagoneer 1987-1990), 1(each), Heating and cooling of the exhaust system causes header and manifold flanges to warp
- Remflex exhaust gaskets come in a standard 1/8 Inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch
- Wrapping of header and manifold flanges results in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite
- Fit type: Universal Fit
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| FastCatMachine | 6.93 | No | No | No |
Any Jeep owner battling the nightmare of warped manifold flanges needs to stop wasting money on traditional thin gaskets and switch to Remflex immediately. The constant heating and cooling cycles on 4.0L engines from 1987 through 1998 inevitably warp the metal, creating gaps that standard seals simply cannot bridge. This gasket solves that specific headache by using a thick, 1/8-inch flexible graphite material that is engineered to crush by 50 percent. This compressibility allows the material to flow into pits and uneven surfaces up to 1/16 inch deep, creating a complete seal where other parts fail. It is a specialized solution for an aging engine architecture that demands more than a standard flat seal to stay leak-free.
Remflex 3010 Exhaust Gasket for Ford V8 Engine, (Set of 2)
Remflex Oval Port Exhaust Gasket Set for Ford V8
- 1-1/4 inch width x 2-3/32 inch height Oval Port. Ford V8 - 429 ('68-'73), 460 ('68-'87), (Except Cobra Jet) Oval Port, For Carbureted Engines, 2/Set
- Not for fuel injected engines
- Manifold or headers
- Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite
- There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Amazon.com | 9.68 | Yes | Yes | Yes |
Any Ford V8 owner struggling with persistent exhaust leaks from warped flanges needs to stop wasting money on standard gaskets and switch to Remflex immediately. These 100 percent flexible graphite gaskets are a total game-changer for older 429 and 460 carbureted engines. Because they lack the rubber binders or composite materials found in cheap alternatives, they won't shrink or harden under extreme heat. Instead, the thick, compressible material actually fills the gaps caused by manifold or header warping. It is incredibly satisfying to install a set and know you won't have to go back and constantly retighten your flange bolts. Just remember that these are specifically designed for carbureted setups and won't work for fuel-injected systems.
Remflex 2070A Exhaust Gasket for GM
Remflex Driver Side Exhaust Gasket for GM LS Engines
- Driver Side (Part A) Only. GM GMC truck/SUV/Hummer LS ('99-'12), Header/Manifold -to-Exhaust Pipe, Driver Side, 1(each)
- There are no rubber binders or composite materials in Remflex Exhaust Gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts
- Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite
- Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Amazon.com | 9.68 | Yes | Yes | Yes |
You might doubt that a simple piece of graphite can solve a persistent exhaust leak, but the Remflex 2070A is built specifically to address the warping issues that plague GM, GMC, and Hummer LS engines. Most gaskets fail because they use rubber binders that harden or shrink under extreme heat, forcing you into a cycle of constant retightening. This driver-side gasket avoids that trap by using 100 percent flexible graphite with no composite materials. At a standard 1/8 inch thickness, it is engineered to crush by 50 percent, allowing it to effectively seal pits and gaps up to 1/16 inch deep. It essentially acts as a custom filler for imperfect manifold flanges, providing a reliable seal that won't degrade over time.
Remflex 2036 Round Port Exhaust Header Gasket
Remflex Round Port Exhaust Header Gaskets for Chevy V8
- 1-3/4" Round Port. Chevy V8 - 396, 402, 427, 454 ('65-'90), 1-3/4" Round Port, For Raised Weld Bead Headers, 2/Set
- There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts
- For use with raised weld bead headers. Additional sealing material is provided around the weld bead to provide a better seal
- Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Amazon.com | 9.68 | Yes | Yes | Yes |
Why settle for constant exhaust leaks and the headache of retightening flange bolts every few weeks? The Remflex 2036 gaskets solve the fundamental problem of warping manifold flanges caused by extreme heating and cooling cycles. Unlike standard gaskets that rely on rubber binders or composites that eventually shrink and harden, these are made from 100 percent flexible graphite. This high compressibility allows them to fill gaps completely, even on raised weld bead headers where traditional seals often fail. Since this two-set pack includes additional sealing material for those weld beads, you get a much more reliable, permanent seal for your 396 to 454 Chevy V8. It is a professional-grade solution for anyone tired of chasing exhaust leaks.
Remflex 2070 Exhaust Gasket for GM, (Set of 2)
Remflex 2070 Exhaust Gasket Set for GM Vehicles
- Both Driver Side (Part A) and Passenger Side (Part B) Gaskets. GM - GMC truck/SUV/Hummer LS ('99-'12), Header/Manifold -to-Exhaust Pipe Flange, 2 Piece Set
- There are no rubber binders or composite materials in Remflex Exhaust Gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts
- Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite
- Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch
- Fit type: Universal Fit
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Speedway Motors | 9.81 | No | No | No |
Remflex has engineered the definitive solution for GM truck and SUV owners tired of persistent exhaust leaks. This two-piece set covers both the driver and passenger sides, specifically designed for LS engines in GMC and Hummer models. What sets these apart from standard gaskets is the 100 percent flexible graphite construction. Unlike cheaper alternatives, there are no rubber binders or composite materials to shrink or harden over time, which means you can finally stop crawling under the vehicle to retighten flange bolts. The 1/8 inch thickness is a game changer. The material is designed to crush by 50 percent, effectively filling pits and gaps caused by warped manifold flanges. It creates a complete, airtight seal that handles extreme temperature cycles without failing.
Remflex 2027 Exhaust Gasket for Chevy L6 Engine
Remflex Exhaust Gasket for Chevy L6 Engines
- Stock Port. Chevy L6 - OHV 216.5 ('37-'53), 235 ('50-'63), 261 ('55-'62), One Piece, Manifold or Headers, 1 (each)
- Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite
- Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch
- The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials. Remflex exhaust gaskets fill those gaps permanently
- There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Amazon.com | 9.68 | Yes | Yes | Yes |
The Remflex 2027 Exhaust Gasket solves the nightmare of warped manifold flanges with its incredible graphite compressibility. If you are running a classic Chevy L6, you know the headache caused by the thermal expansion of aluminum heads against steel manifolds. This gasket is a game-changer because it is made of 100 percent flexible graphite without any rubber binders or composites that typically shrink or harden over time. At a standard 1/8 inch thickness, it is designed to crush by 50 percent, effectively filling pits and gaps up to 1/16 inch. This means you won't find yourself constantly retightening flange bolts just to stop a persistent leak. It provides a permanent, reliable seal for your stock port setup.
Remflex 2030 Exhaust Header Gasket
Remflex Exhaust Header Gaskets for Chevy V8
- 2 inch width x 1-7/8 inch height Irregular Shape Stock Sport. Chevy V8 - GMC BB 454/496/502 Gen. Mark (IV,V,VI),('91 and Newer), Manifold or Headers, 2/Set
- For use with stock cast iron and GM Performance aluminum cylinder heads
- There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts
- Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Amazon.com | 9.68 | Yes | Yes | Yes |
The thick, compressible texture of 100 percent flexible graphite is the first thing you notice when handling these gaskets. Unlike standard options, these Remflex gaskets lack rubber binders or composite materials, meaning they won't shrink or harden under the intense heat of a Big Block Chevy engine. This is a game-changer for anyone dealing with warped manifold or header flanges on a 454, 496, or 502. Because the material conforms so effectively to irregular gaps caused by thermal expansion, you can finally stop the endless cycle of retightening flange bolts. Whether you are running stock cast iron or GM Performance aluminum heads, these gaskets provide a reliable seal that stays put through every heat cycle.
Remflex 6019 Exhaust Gasket for Mopar V8 Engine, (Set of 2)
Remflex Exhaust Gaskets for Mopar V8 Engines
- "1-7/8 inch width x 1-5/8 inch height square port. Mopar v8 - indy 440 cylinder head, 1-7/8" x 1-5/8" square port, 2/set"
- heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite
- remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch
- the aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials. Remflex exhaust gaskets fill those gaps permanently
- there are no rubber binders or composite materials in remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts
- Fit type: Universal Fit
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| FastCatMachine | 6.99 | No | No | No |
Mopar V8 owners struggling with persistent exhaust leaks from warped flanges need to stop wasting time with traditional gaskets and switch to Remflex immediately. The constant thermal cycling between aluminum heads and steel manifolds creates inevitable gaps that standard gaskets simply cannot bridge. These Remflex gaskets solve that problem by using 100 percent flexible graphite that is thick enough to crush and fill pits up to 1/16 inch. Because they lack rubber binders or composite materials, they won't shrink or harden over time, which means you won't find yourself constantly retightening flange bolts. This two-pack provides a permanent, reliable seal for your Indy 440 cylinder heads by compensating for the natural contraction and expansion of dissimilar metals.
SMOHOOL 5811511 Exhaust Manifold Gasket Spring Rebuild Kit for Polaris Sportsman 600 700 800
SMOHOOL Exhaust Manifold Gasket and Spring Rebuild Kit
- Direct replacement parts , repair the leaking exhaust system
- Effectively eliminate noise and making the vehicle exhaust more smoothly
- Include 1 pcs exhaust gasket, 5 pcs spring, 2 pcs donut seal
- Replace exhaust springs parts # 7041804,7041687
- Replace exhaust manifold gasket part # 5811511, exhaust gasket seal part #3610047
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| SMOHOOL | 5.93 | Yes | Yes | Yes |
After weeks of use, the difference in engine performance and sound is immediately apparent. Dealing with a leaking exhaust system is a massive headache, but this rebuild kit from SMOHOOL provides a comprehensive fix for Polaris Sportsman models. Instead of hunting down individual components, you get a complete set including an exhaust gasket, five springs, and two donut seals. This kit does more than just plug a leak. It effectively eliminates annoying exhaust noise and helps the vehicle run much more smoothly. It is a straightforward, direct replacement solution that targets the exact parts needed to restore your machine's integrity without the high cost of buying everything separately.
A Guide to Selecting the Best remflex exhaust system
Understanding the Remflex Material Advantage
The primary reason enthusiasts seek out Remflex gaskets is their ability to create a gas-tight seal without the need for high-torque clamping force that can warp flanges. Traditional gaskets are often thin, rigid, and prone to failure if the mating surfaces are not perfectly flat. Remflex gaskets, however, are composed of a specialized, high-temperature compressible material. When selecting a gasket, you must understand that its efficacy relies on its ability to 'flow' into the microscopic gaps between your exhaust components. This makes them ideal for older vehicles with slightly uneven flanges or custom-fabricated exhaust systems where precision mating is difficult to achieve.
Critical Sizing and Flange Compatibility
The most common mistake in purchasing exhaust gaskets is failing to account for the exact flange dimensions. Remflex gaskets are not 'one size fits all.' You must measure the outer diameter (OD) and the inner diameter (ID) of your exhaust flanges with precision. A gasket that is too small will fail to cover the entire sealing surface, leading to leaks at the outer perimeter. Conversely, a gasket that is too large may interfere with the fitment of adjacent components or prevent the flange from sitting flush. Pay close attention to the thickness of the material. While the compressibility is a feature, a gasket that is excessively thick may push the flanges too far apart, putting undue stress on your mounting hardware.
Temperature Rating and Durability Factors
Exhaust systems operate under extreme thermal stress, with temperatures often exceeding 1,000 degrees Fahrenheit near the manifold. When evaluating a gasket, ensure it is rated for the specific zone of the exhaust where it will be installed. Gaskets used at the collector or header junction face much higher heat loads than those used at the rear muffler flange. A high-quality Remflex gasket should maintain its structural integrity and sealing capability even after repeated heat cycles. If a gasket becomes brittle or loses its ability to compress after a few months of use, it is likely not rated for the thermal intensity of your specific engine configuration.
Installation Requirements and Longevity
To get the most out of your investment, you must approach the installation with a specific mindset. Because these gaskets rely on compression, they require a specific torque sequence to ensure even pressure across the entire surface area. Do not over-tighten to the point of crushing the material into a thin film. Instead, tighten until the gasket has visibly conformed to the flange surfaces. Furthermore, ensure that your flanges are cleaned of all old gasket residue, carbon buildup, and rust. Any debris trapped between the flange and the Remflex material will create a void, rendering the compressible technology useless and resulting in a persistent exhaust leak.
Decision Logic: Which Gasket Do You Need?
When making your final selection, follow this logic: First, identify the specific junction (Header-to-Midpipe vs. Midpipe-to-Muffler). Second, verify the flange diameter measurements. Third, check the heat rating requirements for that specific section of the car. If you are working on a high-performance or turbocharged application, prioritize the thickest, most heat-resistant options available, as the increased thermal load and pressure spikes require a more robust sealing medium.
Frequently Asked Questions
Quick answers about Remflex Exhaust System before you buy.
Our Remflex Exhaust System Rankings
Top 10 Remflex Exhaust System Brands on Amazon
Share of top-ranked products by brand, from our rankings.
How We Selected These Products
We compared Remflex Exhaust System products using product details and customer ratings to identify the best options in the categories..
From that comparison we shortlisted the top 19 Remflex Exhaust System for this page..
We aim to help you find the right gaskets products for your needs and save you time when choosing which Remflex Exhaust System to buy.
Comparison Table
Compare the top 19 picks at a glance — select a column to sort.