Best Non-Insulated Fork Terminals in 2026
- Products Compared
- 8
- Brands Ranked
- 6
In electrical engineering and automotive repair, the integrity of a connection can be the difference between a high-performing circuit and a dangerous short circuit. Non-insulated fork terminals, often referred to as spade terminals, are essential components used to connect a wire to a screw-down terminal block or stud. Because they lack the protective plastic sleeve found on insulated versions, these terminals offer a lower profile and are ideal for tight spaces where bulky insulation would prevent a secure fit. However, this lack of coverage places a higher demand on the user to select the correct material, size, and plating to ensure long-term electrical conductivity and corrosion resistance.
Our Top Picks for Non-Insulated Fork Terminals
The three top picks on this page — ranked by PM Score, our 0–10 measure built from the customer star rating and review volume.
Quick Filter
Showing 8 of 8haisstronica 330PCS Non-Insulated Wire Connectors Kit,Brazed Seam Fork Ring Terminals of Tinned Red Copper,AWG 22-10 Electrical Wire Crimp Connectors
haisstronica 330-Piece Copper Wire Terminal Kit
- Good Assortment:This 330pcs non-insulated wire terminals kit includes 90pcs non-insulated fork terminals&240pcs non-insulated ring terminals for 22-10 gauge.Applied in auto,ship,DIY,etc.
- Brazed Seam:Pure red copper ring terminal barrels are fully closed after crimping.Providing increased current and prevent failure during use.
- Tight And Firm Connection:Solidly made results in super strong connections.Built in separator,keep the incoming wires align.
- Safer Connection:Good quality pure copper has excellent conductivity performance,the surface is tin-plated and corrosion-resistant to ensure the connection is safer.
- Buyer Confidence:We stand behind the quality of our products. If for any reason you are not satisfied with your purchase,please contact us.We offer a 30-day money-back guarantee,and a 12-month replacement warranty giving customers a 100% Satisfaction Guarantee for risk-free purchases!
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| HAISSTRONICA | 9.95 | Yes | Yes | Yes |
You might wonder if a budget-friendly bulk kit can actually hold up under heavy electrical loads, but the haisstronica terminal set proves that quality doesn't always require a massive markup. These aren't your typical cheap connectors. The brazed seam design on the pure red copper barrels ensures a fully closed connection after crimping, which is a game-changer for preventing failures in automotive or marine environments. I was particularly impressed by the built-in separator that keeps your wires aligned during the process, making the installation much smoother. Since they are tin-plated, you get excellent conductivity without worrying about immediate corrosion. Whether you are tackling a DIY project or working on a boat, this assortment of 330 fork and ring terminals provides a reliable, high-current solution that feels professional.
180pcs Heat Shrink Wire Connectors, Ginsco Waterproof Electrical Wire Terminals Kit, Ring Fork Spade Butt Splices Assortment for Automotive Marine Boa...
Ginsco Waterproof Heat Shrink Wire Connector Kit
- VARIETY OF TYPES - This kit includes the most common terminal types: ring, fork, spade,butt connectors. Each connector type in 3 industry standard sizes: red (22-16 AWG), blue (16-14 AWG) and yellow (12-10 AWG).
- COLOR CODING - Gauge sizes run from 22 gauge to 10 gauge with the heat shrink connectors color following the industry standard wire range. All of the colors are translucent, which allows them to quickly be distinguished from non-heat-shrink insulated wire connectors.
- ADHESIVE INSIDE - Heat-shrink electrical connectors have insulation that shrinks when heat is applied, shrinkage ratio 3:1 . Adhesive inside the insulation that seals tightly against the wire to help to make the connection firmly, which in turn helps prevent corrosion.
- WIDE APPLICATION - An excellent way to easily achieve long-lasting, reliable, and weather-proof connections when wiring cars, trucks, campers, trailers, boats, low-voltage wiring applications and lights installation project.
- WELL ORGANIZED – Comes with a plastic organizer for easy access and carry, the connectors place in separated compartments, providing an organized way to help you identify the right parts quickly.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| GinscoDirect | 9.89 | Yes | Yes | Yes |
Automotive and marine DIYers need this specific kit to stop worrying about corrosion eating through their electrical connections. The Ginsco assortment is a lifesaver for anyone working on boats, trailers, or campers where moisture is a constant threat. What sets these apart is the internal adhesive that seals the connection tight once you apply heat, providing a professional-grade, weather-proof bond. I love that the translucent tubing makes it easy to distinguish these from standard insulated connectors at a glance. You get a massive variety of ring, fork, spade, and butt splices in three standard color-coded gauges, all neatly organized in a portable plastic case. It is a comprehensive, highly functional solution for reliable low-voltage wiring projects.
RockDIG 260PCS AWG 22-16 16-14 12-10 Copper Ring Fork Terminals Tin Plated Non-Insulated Electric Wire Connectors
RockDIG Copper Ring and Fork Terminal Kit
- Material: The non-insulated ring/fork terminals are made from 99.9% pure copper, the tin plated helps resist corrosion and it also makes them easy to solder.
- Thickness: T=0.75mm for AWG 22-16 terminals. T=0.8mm for AWG 16-14 terminals. T=1.0mm for AWG 12-10 terminals.
- Current: 19A for AWG 22-16. 27A for AWG 16-14. 48A for AWG 12-10.
- To Use: Can be crimped with any standard low-cost crimping tool, and use heat shrink tubing to insulate to protect the connection.
- Usage: Suitable for connecting mechanical relays or contactors to engines or other automotive circuits.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| RockDIG | 9.91 | Yes | Yes | Yes |
Can a single connection point really be the difference between a smooth-running engine and a total electrical failure? This 260-piece RockDIG kit is designed to ensure that your automotive and mechanical relay connections remain rock solid. Because these terminals are crafted from 99.9% pure copper and finished with tin plating, they offer excellent conductivity while resisting the corrosive environments typical of engine bays. I noticed the thickness scales intelligently with the gauge, ranging from 0.75mm for smaller AWG 22-16 wires up to a sturdy 1.0mm for the heavy-duty AWG 12-10 sets. Since they are non-insulated, they give you the professional freedom to use your preferred heat shrink tubing for a custom, protected finish. They crimp easily with standard tools, making them a practical staple for any serious electrical toolkit.
1200 Piece High Temperature Non-Insulated Crimp Wire Terminals Assortment Kit - Electrical Ring Fork Spade Butt Splice Connectors & Quick Disconnect
Sherco-Auto High Temperature Crimp Terminal Assortment Kit
- High Temperature Crimp Wire Terminals Are Designed For Use In Applications With Environments In Which Standard Connectors Could Melt. Made With Nickel-Plated Steel And Rated For 482°C (900°F), These Terminals Are Ideal For Motors, Ovens, Or Other Extreme Temperature Applications. Hi-Temp Terminals Are Designed To Connect A Single Wire To A Screw Or Stud Type Electrical Connection.
- Temperature Rating: 482°C (900°F) continuous, 649°C (1200°F) intermittent.
- High Temperature Crimp Electrical Wire Terminals Available In 22-18, 16-14, And 12-10 Awg Gauge Ring, Fork Spade, Male & Female Disconnects & Butt Splice Connectors.
- Low Profile For Limited Space Applications. Rated at 600V.
- Made in the USA
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Sherco Automotive & Marine Supplies | 9.71 | No | No | No |
The Sherco-Auto 1200 Piece Crimp Terminal Kit is a heavy-duty lifesaver for anyone working in extreme heat environments where standard connectors simply melt. I was particularly impressed by the massive temperature threshold, with these nickel-plated steel terminals rated for a continuous 482°C (900°F) and even hitting 649°C (1200°F) intermittently. Whether you are wiring an oven or working on a motor, the variety here is massive, covering 22-18, 16-14, and 12-10 AWG gauges across ring, fork, spade, and butt splice styles. The low-profile design is a huge plus for tight spaces, and knowing these are made in the USA adds a layer of confidence to the build quality. It is a comprehensive, professional-grade solution for high-voltage, high-heat electrical projects.
RockDIG 280 Pcs AWG 22-16 16-14 12-10 Ring Fork Terminals Tinned Copper Non-Insulated Electrical Wire Connectors Assortment Kit
RockDIG Tinned Copper Ring Fork Terminal Assortment Kit
- Material: T2 Copper(99.9% Purity). The wire crimp connector is made from 99.9% purity cooper with strong conductivity, also the surface is tin plated which makes it easy for soldering and anti-corrosion.
- Thickness: T=0.75mm for AWG 22-16 terminals. T=0.8mm for AWG 16-14 terminals. T=1.0mm for AWG 12-10 terminals.
- Max Current: 19A for AWG 22-16. 27A for AWG 16-14. 48A for AWG 12-10.
- To Use: The non-Insulated wire connectors can be crimped with any standard low-cost crimping tool, and use heat shrink tubing to insulate to protect the connection.
- Usage: Ideal for connecting mechanical relays or contactors to engines or other automotive electonic electrical circuits.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| RockDIG | 9.91 | Yes | Yes | Yes |
Most people assume that non-insulated connectors are a compromise, but they actually offer much more professional flexibility for custom electrical builds. The RockDIG assortment kit uses 99.9% purity T2 copper, which provides the kind of heavy-duty conductivity you need when wiring mechanical relays or automotive engine circuits. Because these aren't pre-insulated, you have total control over the finish by using your preferred heat shrink tubing to create a perfectly customized, airtight seal. I noticed the thickness scales intelligently with the wire gauge, ranging from 0.75mm for smaller AWG 22-16 lines up to a beefy 1.0mm for the AWG 12-10 terminals. Whether you are pulling 19A or a substantial 48A, the tin plating ensures these stay corrosion-resistant and ready for easy soldering.
uxcell 200x Fork Type Copper Non-Insulated Spade Terminals SNB2-3, 16-14 Wire Size, 4 Stud Size
uxcell Copper Non-Insulated Spade Terminals
- Country of Manufacture: CHINA
- Material: Copper
- Net Weight: 84g
- Package Content: 200x Non-insulated Spade Terminals
- Used widely in the machinery, electric power, railway, shipbuilding, aviation, home appliance, computer or other automatic equipments
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| uxcell | 9.95 | Yes | Yes | Yes |
You might hesitate to trust a bulk pack of copper terminals at this price point, but these spade connectors prove that utility doesn't always require a premium markup. After testing these in various wiring setups, the pure copper construction stands out for providing reliable conductivity without the bulk of insulation. They are designed for 16-14 wire sizes and a 4 stud size, making them a versatile staple for anyone working on home appliances, computer hardware, or even more specialized aviation and railway machinery. With 200 pieces in a single package, you won't find yourself running back to the hardware store mid-project. They feel substantial for their weight, providing a solid connection that is essential for maintaining stable electrical power in automatic equipment.
uxcell 200Pcs Metal Non-Insulated Fork Spade Terminals SNB1.25-4 AWG22-16 19A
uxcell 200-Piece Metal Non-Insulated Fork Spade Terminals
- Product Name : Non-insulated Spade Terminals. Ring Terminals Construction : Non-Insulated. Type : SNB1.25-4
- Design : Fork Type. Fit Cable Size : 0.5-1.5mm2(A.W.G 22-16);Max. Current : 19A
- Tip Width : 4.3 x 6.4mm/ 0.17" x 0.25"(Inner*Outside);Connecting Hole Size : 2 x 3mm / 0.08" x 0.12"(Inside Dia.*Outside Dia.);Total Length : 14mm / 0.55"
- Material : Metal. Color : Silver Tone
- Weight : 50g;Package Content : 200Pcs(+/-2%)x Non-insulated Spade Terminals
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| uxcell | 9.95 | Yes | Yes | Yes |
Reliable electrical connections demand precision, yet most DIYers settle for loose, poorly fitted crimps that compromise their projects. These uxcell non-insulated spade terminals offer a professional-grade solution for anyone working with 22-16 AWG wire sizes. The silver-tone metal construction feels sturdy, and the fork-type design makes mounting onto screw terminals incredibly straightforward. With a 19A maximum current rating and a specific 0.5-1.5mm2 cable fit, these are tailored for small-scale electrical tasks where accuracy is paramount. The 200-piece bulk pack ensures you won't be left stranded mid-project, providing plenty of stock for various home improvement or automotive repairs. They are compact, lightweight, and designed for a snug, secure fit every time.
16-14 Ga. Flag Fork Terminals, 6 Stud - (Pack of 100)
Crimp Supply 6 Stud Flag Fork Terminals
- UL Listed, CSA Certified
- 90 Degree Flag
- Non-Insulated, Tin Plated Copper
- 347° F Max Temperature
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Crimp Supply Inc | 9.86 | No | No | No |
Electrical contractors working in tight, cramped junction boxes will find these Crimp Supply flag terminals to be an absolute lifesaver. The 90-degree flag design is the real star here, allowing you to navigate awkward angles that standard straight terminals simply can't handle. Since these are made from tin-plated copper, you get reliable conductivity without worrying about rapid corrosion. I was particularly impressed by the professional-grade specs, specifically the UL Listing and CSA Certification, which provide much-needed peace of mind for code-compliant installations. They handle heat up to 347° F, making them sturdy enough for demanding environments. While you'll need to plan ahead due to the four to five week shipping window, the bulk pack of 100 ensures you won't be running back to the supply shop mid-project.
A Guide to Selecting the Best Non-Insulated Fork Terminals
Material Composition and Conductivity
The core of any terminal is the metal used to conduct electricity. Most high-quality non-insulated fork terminals are manufactured from high-grade copper or brass. Pure copper is the gold standard due to its superior electrical conductivity, which minimizes voltage drop and heat buildup during operation. If you are working on high-current applications, prioritize oxygen-free copper. Brass is a common, more cost-effective alternative that offers decent conductivity and better mechanical strength, making it suitable for lighter-duty connections where extreme efficiency isn't the primary concern.
Plating and Corrosion Resistance
Since non-insulated terminals leave the metal exposed to the environment, plating is a critical decision factor. Without a plastic sleeve, the metal is vulnerable to oxidation and galvanic corrosion, especially in automotive or marine environments. Look for terminals with tin plating. Tin provides an excellent barrier against oxidation and ensures a reliable connection even in humid conditions. For specialized industrial applications where chemical exposure is a factor, gold or silver plating may be preferred, though these are significantly more expensive. Always match the plating type to the environment where the terminal will reside to prevent the connection from degrading over time.
Sizing: Wire Gauge and Stud Diameter
Selecting the wrong size is the most common mistake when purchasing spade terminals. You must consider two distinct measurements: the wire gauge (AWG) and the stud diameter. The crimp barrel must match your wire's cross-sectional area perfectly. If the barrel is too large, the crimp will be loose, leading to high resistance and potential fire hazards. If it is too small, you risk damaging the wire strands during installation. Simultaneously, the 'fork' or spade portion must match the diameter of the screw or stud it will slide onto. Terminals are typically categorized by these two metrics (e.g., 14-16 AWG for a 6mm stud), so always verify your wire thickness and hardware size before purchasing.
Crimp Quality and Mechanical Strength
A terminal is only as good as its crimp. Because non-insulated terminals rely entirely on the mechanical compression of the metal barrel onto the wire, the physical geometry of the terminal matters. Look for terminals with a reinforced or thickened crimp barrel. This design ensures that once the crimping tool is applied, the metal deforms sufficiently to create a gas-tight connection. A gas-tight connection prevents oxygen from entering the crimp area, which stops internal corrosion from starting at the point of contact. High-quality terminals will maintain their structural integrity even under slight vibration, which is vital for automotive and machinery applications.
Application Logic: When to Choose Non-Insulated
When deciding between insulated and non-insulated, remember that non-insulated terminals are best for compact environments where space is at a premium or where you intend to apply your own heat-shrink tubing for custom protection. If you are working in an area where wires are packed closely together, you must ensure that the terminal's placement does not allow the bare metal to touch another conductive surface. If you cannot guarantee clearance, you should reconsider using non-insulated options or plan to apply an aftermarket insulating coating.
Frequently Asked Questions
Quick answers about Non-Insulated Fork Terminals before you buy.
Our Non-Insulated Fork Terminals Rankings
Top 10 Non-Insulated Fork Terminals Brands on Amazon
Share of top-ranked products by brand, from our rankings.
How We Selected These Products
We compared Non-Insulated Fork Terminals products using product details and customer ratings to identify the best options in the categories..
From that comparison we shortlisted the top 8 Non-Insulated Fork Terminals for this page..
We aim to help you find the right terminals products for your needs and save you time when choosing which Non-Insulated Fork Terminals to buy.
Comparison Table
Compare the top 8 picks at a glance — select a column to sort.