PickSmartly Buying Guide

Best Grade 5 Hex Bolts in 2026

9.6 PM Score
Products Compared
7
Brands Ranked
4
Our guides are compiled from product information and customer ratings. If you click on links we provide, we may receive compensation.

When you move beyond standard hardware store fasteners and enter the realm of structural integrity and automotive repair, Grade 5 hex bolts become the industry standard. Unlike generic low-carbon steel bolts that can strip or snap under tension, Grade 5 fasteners are medium-carbon steel bolts that have been quenched and tempered to provide a specific balance of strength and ductility. Choosing the right bolt isn't just about finding the right diameter. It is about ensuring the fastener can handle the specific shear and tensile loads of your project without catastrophic failure. This guide will help you navigate the technical nuances of selecting the perfect Grade 5 hex bolt for your mechanical or construction needs.

Editor's Choice

Our Top Picks for Grade 5 Hex Bolts

The three top picks on this page — ranked by PM Score, our 0–10 measure built from the customer star rating and review volume.

#1

Wanyifa Titanium M5x20mm with Washer Allen Hex Tapered Bolts Screw for Bicycle Stem Pack of 6 (Colorful)

Wanyifa Colorful Titanium Bicycle Stem Bolts

WANYIFA M5X20MM

PM Score for WANYIFA (PM Score)

9.6 PM Score
Buy on Amazon
  • Material: 6AL/4V(TC4)Titanium Alloy,Grade 5
  • Specification: M5x20mm with Washer
  • Thread Pitch : 0.8mm. Head Size : 8.5 x 5mm/ 0.33" x 0.2" (D*H);Washer Size : 8.5 x 1mm/ 0.33" x 0.04" (D*Thickness)
  • Weight : about 2.8g/Piece
  • Package Content : 6x Titanium M5x20mm with Washer Bolts
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
WANYIFA 9.87 Yes Yes Yes

Most riders focus on heavy carbon frames or lightweight wheels to save weight, but upgrading your stem hardware is actually one of the most overlooked ways to shave grams. These Wanyifa bolts are crafted from Grade 5 6AL/4V titanium alloy, which provides an incredible strength-to-weight ratio compared to standard steel. At just 2.8g per piece, they are incredibly light, and the inclusion of integrated washers ensures a secure fit for your M5 setup. Beyond the performance benefits, the colorful finish adds a much-needed pop of personality to your cockpit. Whether you are looking for a functional weight reduction or just want your bike to stand out during a group ride, these tapered hex bolts deliver professional-grade material in a convenient six-pack.

What We Like
Grade 5 titanium
Ultra-lightweight design
Vibrant colorful finish
Includes integrated washers
Tapered hex head

Wanyifa Titanium Ti Bolt M5x9 16 18 20 25 30 35 40 45 50 55 60mm Tapered Head Screws pack of 4 (M5x16mm, Black)

Wanyifa Grade 5 Titanium M5x16mm Black Bolts

WANYIFA M5

PM Score for WANYIFA (PM Score)

8.8 PM Score
Buy on Amazon
  • Material: 6AL/4V(TC4)Titanium Alloy,Grade 5
  • Weight :1.9 Gram/Piece. Use 4mm Allen key. Standard:DIN 912
  • Thread Pitch : 0.8mm. Head Size : 8.5 x 5mm/ 0.33" x 0.2" (D*H)
  • Bolt Size : M5x16mm. Thread Diameter (d) : 5mm/ 0.2''
  • Package Content : 4x Titanium DIN912 M5x16mm Bolts
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
WANYIFA 9.87 Yes Yes Yes

The matte black finish on these Wanyifa titanium bolts feels incredibly smooth to the touch, instantly signaling a level of quality far beyond standard steel hardware. Swapping out heavy fasteners for these Grade 5 6AL/4V titanium alloy screws makes a noticeable difference in weight reduction, with each piece weighing in at a mere 1.9 grams. I found the DIN 912 tapered head design to be precision-engineered, fitting perfectly with a 4mm Allen key without any stripping or play. Whether you are upgrading a high-performance bike or a precision tool, the 0.8mm thread pitch ensures a secure, professional fit. They offer that perfect intersection of extreme durability and lightweight performance that enthusiasts crave.

What We Like
Grade 5 titanium
Ultra-lightweight design
Matte black finish
Precision DIN 912 standard
High-strength alloy

Spectre Performance 46703 3/4" Header Bolt

Spectre Performance V8 Engine Header Bolts

SPECTRE 46703 5.70 X 3.70 X 1.10 Inches 0.54 Pounds

PM Score for SPECTRE (PM Score)

5.3 PM Score
Buy on Amazon
  • Fits most domestic V8 engines
  • 3/8 inch-16 by 3/4 inch, grade 5, gold iridite hex head bolts
  • Bolt set includes a chrome installation tool
  • Designed for easy installation
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68 Yes Yes Yes

Every domestic V8 enthusiast building a high-performance exhaust system needs these Spectre header bolts to avoid the nightmare of stripped threads or uneven clamping. I found the gold iridite finish on these grade 5 hex head bolts to be a massive plus, providing a layer of protection that standard hardware just lacks. The 3/8 inch-16 by 3/4 inch sizing is precise, and the inclusion of a dedicated chrome installation tool is a total game-changer for those tight engine bays where standard sockets won't fit. Instead of wrestling with generic hardware, you get a kit specifically designed to make the installation process smooth and professional. It is a small investment that prevents a major headache during a critical build phase.

What We Like
Grade 5 hardware
Gold iridite finish
Chrome installation tool
Domestic V8 compatibility
Easy installation design
#4

NEF Grade 8 Nut Bolt Washer Assortment, Hex Head Cap Screws, Flat and Lock Washers, Hex Nuts, Coarse Thread, Set of 1025 Fasteners

Northeast Fasteners Grade 8 Hex Bolt and Nut Assortment

NORTHEAST FASTENERS ASST24HHCSC8 29.00 Pounds
  • Hex Bolt, Nut and Washer Assortment - Grade 8 - Coarse (USS) - Yellow Zinc - 1025 pieces
  • Sizes: 1/4, 5/16, 3/8 and 1/2 Inch
  • Lengths: 3/4, 1, 1 1/2, 2 and 2 1/2 Inch
  • Includes 24 Hole Metal Storage Compartment with Latch
  • See Second Image for Detailed Product Information
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Northeast Fasteners Co., Inc. 9.76 No No No

The Northeast Fasteners Grade 8 assortment is a heavy-duty powerhouse that eliminates the constant headache of hunting for specific high-strength hardware. This massive 1025-piece collection covers the essential diameters from 1/4 to 1/2 inch, providing a massive range of coarse thread lengths that ensure you are never stuck mid-project. Because these are Grade 8 fasteners with a yellow zinc finish, they offer the structural integrity and corrosion resistance required for serious mechanical work. The inclusion of hex nuts, flat washers, and lock washers makes this a truly comprehensive kit. I particularly like the 24-compartment metal storage case. The latch feels secure, keeping your workspace organized and preventing smaller components from spilling out during transport.

What We Like
Grade 8 strength
Yellow zinc finish
1025 piece set
Metal storage case
Coarse thread design
#5

Allied Titanium 0004434, (Pack of 12) M8-1.25 Pitch X 25mm Metric Titanium Hex Head Bolt, Grade 5 (Ti-6Al-4V)

Allied Titanium Grade 5 M8 Hex Head Bolts

ALLIED TITANIUM 0004434 1.19 X 0.51 X 0.51 Inches 0.02 Pounds

PM Score for ALLIED TITANIUM (PM Score)

5.1 PM Score
Buy on Amazon
  • M8-1.25 Pitch X 25mm Allied Titanium Hex Head Bolt
  • TRUE TITANIUM(TM) - Stronger, Lighter and Corrosion Free
  • Titanium is good for use in or near saltwater
  • General Tolerance: +0/-0.27 mm
  • Meets ISO 4014. Grade 5 (Ti-6Al-4V) Titanium with Polished Finish
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Allied Titanium 8.43 No No No

Saltwater spray hitting your marine engine or coastal vehicle can turn standard steel fasteners into rusted junk in a matter of weeks. These Allied Titanium Grade 5 bolts are the solution for anyone needing high-strength hardware that refuses to succumb to corrosion. Because they are crafted from Ti-6Al-4V titanium, they offer a massive weight reduction without sacrificing the structural integrity required for demanding mechanical tasks. The polished finish looks professional, and the precision M8-1.25 pitch ensures a tight, reliable fit every time. Whether you are upgrading a boat component or a performance vehicle, these bolts provide the peace of mind that comes with using true titanium rather than inferior alloys.

What We Like
Corrosion free
Grade 5 titanium
Polished finish
Lightweight strength
Saltwater resistant
#6

Allied Titanium 0005232, (Pack of 3) 3/8-24 X 1-1/4 UNF Titanium Hex Head Bolt, Grade 5 (Ti-6Al-4V)

Allied Titanium Grade 5 Hex Head Bolt Pack

ALLIED TITANIUM 0005232 1.50 X 0.56 X 0.56 Inches 0.03 Pounds

PM Score for ALLIED TITANIUM (PM Score)

5.1 PM Score
Buy on Amazon
  • 3/8-24 X 1-1/4 UNF Allied Titanium Hex Head Bolt
  • TRUE TITANIUM(TM) - Stronger, Lighter and Corrosion Free
  • Titanium is good for use in or near saltwater
  • General Tolerance: +0/-0.018 inch
  • Meets ASME B18.2.1. Grade 5 (Ti-6Al-4V) Titanium with Polished Finish
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Allied Titanium 8.48 No No No

The Allied Titanium Grade 5 Hex Head Bolt is a masterclass in strength-to-weight optimization for high-stakes applications. I found that the Ti-6Al-4V composition provides that essential edge where every ounce of weight reduction counts without sacrificing structural integrity. Because these are crafted from true titanium, they are virtually immune to the corrosive effects of saltwater, making them a reliable choice for marine environments. The polished finish looks professional, and the adherence to ASME B18.2.1 standards ensures a precise fit with a general tolerance of +0/-0.018 inch. Whether you are upgrading a performance vehicle or securing hardware near the coast, these bolts offer a level of durability that standard steel simply cannot match.

What We Like
Grade 5 titanium
Corrosion free
Saltwater resistant
Polished finish
Lightweight strength
#7

Allied Titanium 0004242, (Pack of 10) 1/4-20 X 1-1/2 UNC Titanium Hex Head Bolt, Grade 5 (Ti-6Al-4V)

Allied Titanium Grade 5 Hex Head Bolts

ALLIED TITANIUM 0004242 1.50 X 0.25 X 0.44 Inches 0.01 Pounds

PM Score for ALLIED TITANIUM (PM Score)

0.0 PM Score
Buy on Amazon
  • 1/4-20 X 1-1/2 UNC Allied Titanium Hex Head Bolt
  • TRUE TITANIUM(TM) - Stronger, Lighter and Corrosion Free
  • Titanium is good for use in or near saltwater
  • General Tolerance: +0/-0.013 inch
  • Meets ASME B18.2.1. Grade 5 (Ti-6Al-4V) Titanium with Polished Finish
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Allied Titanium 8.43 No No No

Marine engineers and high-performance builders demanding absolute corrosion resistance should stop looking elsewhere. These Allied Titanium hex head bolts are a serious upgrade for anyone working in saltwater environments where traditional steel simply fails. Because they are crafted from Grade 5 Ti-6Al-4V titanium, you get a massive strength-to-weight advantage without the heavy bulk of standard fasteners. The polished finish looks professional, but the real value lies in the technical precision of the +0/-0.013 inch tolerance and the adherence to ASME B18.2.1 standards. Whether you are repairing a boat or optimizing a lightweight racing rig, this ten-pack provides the reliable, lightweight, and rust-proof security that mission-critical projects require.

What We Like
Grade 5 titanium
Saltwater corrosion resistant
Polished finish
Lightweight strength
High precision tolerance
Buying Guide

A Guide to Selecting the Best Grade 5 Hex Bolts

A Guide to Selecting the Best Grade 5 Hex Bolts

Understanding the Grade 5 Identification

The most critical factor in selecting a Grade 5 bolt is verifying its grade. In the SAE (Society of Automotive Engineers) system, Grade 5 bolts are easily identifiable by the markings on the head. You should look for three radial lines etched into the top of the bolt head. If the head is smooth or lacks these markings, you are likely looking at a Grade 2 bolt, which lacks the necessary tensile strength for high-stress applications. Never substitute a Grade 2 bolt for a Grade 5 in a load-bearing environment, as this can lead to sudden mechanical failure. Always inspect the head markings before purchase to ensure you are getting the tempered strength you require.

Material Composition and Heat Treatment

The strength of a Grade 5 bolt comes from its specific heat-treatment process. These bolts are made from medium-carbon steel that undergoes quenching and tempering to achieve a tensile strength of approximately 120,000 psi. When shopping, understand that the 'Grade 5' designation refers to this specific mechanical property. While you won't always see the chemical breakdown on the packaging, the performance is what matters. This medium-carbon composition allows the bolt to be strong enough to hold heavy loads while remaining ductile enough to resist brittle fracturing under vibration—a key advantage over higher-grade, more brittle fasteners.

Thread Pitch and Fitment

A common mistake in fastener selection is overlooking the thread pitch. Grade 5 bolts come in both Coarse (UNC) and Fine (UNF) thread profiles. Coarse threads are the standard for most general construction and automotive applications because they are faster to install and less prone to cross-threading. However, fine threads offer higher strength in tension and are less likely to vibrate loose, making them ideal for precision automotive components or environments with high vibration. Before buying, ensure you know whether your application requires a standard coarse thread or a specialized fine thread to match your existing nuts or tapped holes.

Corrosion Resistance and Coating Options

The environment in which your bolt will live is just as important as its strength. Grade 5 bolts are typically supplied in a plain, oiled finish, which provides minimal protection against rust. If your project involves automotive undercarriages, marine environments, or outdoor structures, you must look for specific coatings. Zinc plating offers a decent baseline for indoor or mild outdoor use, while Hot Dip Galvanized (HDG) coatings provide heavy-duty protection against oxidation in harsh weather. For extreme environments, consider phosphate coatings which provide a base for painting or additional chemical resistance. Always match the coating to the moisture levels of your application to prevent the bolt from seizing or rusting through.

Length and Shank Diameter

Finally, consider the functional geometry of the bolt. Ensure you are measuring the length from under the head to the tip of the bolt. Furthermore, pay attention to the 'grip length'—the unthreaded portion of the shank. For structural applications where shear strength is paramount, a longer unthreaded shank is often preferred, as the smooth shank provides more resistance to shearing forces than the threaded portion. Always choose a bolt that provides enough thread engagement to pass through your material and into the receiving component with sufficient margin for a washer and nut.

Ready to choose?

Jump back to our ranked picks or compare the shortlist side by side.

Frequently Asked Questions

Quick answers about Grade 5 Hex Bolts before you buy.

Grade 5 refers to a medium-strength carbon steel bolt that has been heat-treated. You can identify them by the three radial lines stamped on the head of the bolt.

Yes, provided they have a protective coating like zinc or galvanization to prevent rust. While strong, they are best suited for automotive and general machinery rather than heavy-duty bridge or skyscraper construction.

Grade 8 bolts are higher strength and harder than Grade 5. While Grade 5 is excellent for most automotive repairs, Grade 8 is required for high-stress applications where extreme shear strength is critical.

Grade 5 bolts have high tensile strength, but stripping usually occurs due to improper torque or using a mismatched wrench size. Always use a high-quality socket to ensure a tight grip on the hex head.

It is generally not recommended. Mixing different metals can lead to galvanic corrosion. For the best results, pair Grade 5 bolts with matching carbon steel nuts.

Look at the head. Standard low-carbon bolts have no markings, whereas Grade 5 bolts will always feature three distinct lines etched into the top of the hex head.

No. You should never replace a higher-grade bolt with a lower-grade one, as the Grade 5 bolt may fail under the specific load requirements of the original design.

Look for bolts with a zinc plating or a hot-dipped galvanized finish. For extreme environments, consider using a specialized anti-seize lubricant during installation.
Rankings & Insights

Our Grade 5 Hex Bolts Rankings

7 Products Compared
5.6 Avg PM Score
4 Brands Ranked

Top 10 Grade 5 Hex Bolts Brands on Amazon

Share of top-ranked products by brand, from our rankings.

  1. 01 Allied Titanium 3 (42.9%)
  2. 02 Wanyifa 2 (28.6%)
  3. 03 Northeast Fasteners 1 (14.3%)
  4. 04 Spectre 1 (14.3%)

How We Selected These Products

We compared Grade 5 Hex Bolts products using product details and customer ratings to identify the best options in the fasteners..

From that comparison we shortlisted the top 7 Grade 5 Hex Bolts for this page..

We aim to help you find the right bolts products for your needs and save you time when choosing which Grade 5 Hex Bolts to buy.