PickSmartly Buying Guide

Best Abn Jaw Pullers in 2026

9.8 PM Score
Products Compared
8
Brands Ranked
1
Our guides are compiled from product information and customer ratings. If you click on links we provide, we may receive compensation.

When dealing with stubborn bearings, gears, or pulleys, a standard hammer and screwdriver approach is a recipe for catastrophic component failure. This is where high-quality jaw pullers become indispensable tools in an automotive or industrial toolkit. Specifically, choosing a reliable jaw puller means selecting a tool designed to distribute force evenly across a circular object, preventing deformation while providing the mechanical advantage necessary to overcome friction and interference fits. Whether you are a professional mechanic or a dedicated DIY enthusiast, understanding the nuances of jaw configuration and material strength is critical to ensuring you don't strip a shaft or snap a tool under load.

Editor's Choice

Our Top Picks for Abn Jaw Pullers

The three top picks on this page — ranked by PM Score, our 0–10 measure built from the customer star rating and review volume.

ABN Bearing Puller with 1/2in to 4-5/8in Jaw – Splitter Tool for Wheel Hub, Gear Pinion, Bearing Separator

ABN Heavy-Duty Bearing and Gear Splitter Tool

ABN 6878 9.00 X 7.50 X 1.25 Inches 5.75 Pounds

PM Score for ABN (PM Score)

9.8 PM Score
Buy on Amazon
  • PRACTICAL DAMAGE-FREE SEPARATOR: The ABN Bearing Puller with 1/2" to 4-5/8” Inch Jaw – Splitter Tool for Wheel Hub, Gear Pinion, Bearing Separator professionally applies even pressure to smoothly separate bearings and remove gears without damage
  • VERSATILE USES: Removes bearings, pinions, gears, pulleys, steering wheels, and fittings from shafts. For automobiles, ATVs, and power sport vehicles
  • DURABLE FOR HEAVY-DUTY APPLICATIONS: Constructed from heat-treated and chrome-plated steel with a black oxide finish for rust-resistance, strength, and longevity
  • ADVANCED DESIGN FEATURES: Knife-like sharp angled edges on tapered bevel which are easily placed behind the part to secure a gripping surface, even when clearances are extremely limited, and gets under bearing far enough to not damage bearing when pulling. Splitter halves include SAE standard threaded holes for the acceptance of pushing or pulling attachments (not included)
  • SPECIFICATIONS: 4-5/8” inches maximum spread. 1/2" inch minimum spread. Approximate 5/8" inch -18 threaded holes for the push/puller. Approximate 4-3/8” inches distance between adjusting screws
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Marketplace Pros 9.93 Yes Yes Yes

You might assume a budget-friendly specialty tool won't hold up under real pressure, but the ABN Bearing Puller proves that professional-grade separation doesn't require a massive investment. I was particularly impressed by the knife-like, sharp angled edges on the tapered bevel. They slide behind parts with ease even when you're working in tight clearances. This tool handles everything from wheel hubs to steering wheels by applying even pressure, which is crucial for avoiding accidental damage to expensive components. The heat-treated, chrome-plated steel construction feels incredibly rugged, and the black oxide finish gives me confidence it won't succumb to rust in a greasy toolbox. Whether you are working on an ATV or a standard automobile, the adjustable spread makes it a versatile staple for any mechanic.

What We Like
Heat-treated steel
Chrome-plated finish
Sharp angled edges
Rust-resistant coating
Versatile splitter design

ABN 3-Jaw Gear Puller Set – 3in, 4in, and 6in Removal Tool Kit for Slide Gears, Pulley, and Flywheel

ABN Three-Jaw Gear Puller Set

ABN 0302 5.20 X 4.90 X 9.75 Inches 6.55 Pounds

PM Score for ABN (PM Score)

9.7 PM Score
Buy on Amazon
  • [Durable 3 Jaw Puller Set]: Use the ABN 3, 4, and 6-Inch Small Gear Puller 3 Jaw Small Engine Flywheel Puller Set to remove most shift-fitted parts with ease. 3 prong gear puller evenly distributes pulling force to protect your gears
  • [Damage-Free Removal]: Manual bearing pullers remove slide gears, pulleys, bearings, bushings, and flywheels without causing damage to your application
  • [Multi-Position Design]: Universal pulley puller tools have reversible jaws that switch from inside to outside grip in short or long reach lengths for maximum versatility. Each tool features 4 reach lengths
  • [Built to Last]: Forged and hardened steel provide maximum strength and longevity to the gear puller sets. Slim puller jaws allow for easy gripping and access to tight spaces while the steel center bolt and acme-thread offer smooth operation
  • [Works with your Tools]: Tall hex head screw fits your existing hand wrench, ratchet, or combination spanner for gear and bearing removal
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Marketplace Pros 9.93 Yes Yes Yes

Most mechanics settle for brute force and makeshift hammers that inevitably mar delicate components, but the ABN 3-Jaw Gear Puller Set offers a precise, professional alternative for delicate engine work. I found that the ability to switch between inside and outside grips via the reversible jaws makes these tools incredibly versatile for tight engine bays. Whether you are tackling a small flywheel or a stubborn pulley, the forged and hardened steel construction provides a level of confidence that cheaper alternatives lack. The slim jaws are a lifesaver when navigating cramped spaces, and the acme-thread center bolt ensures the pulling force remains smooth rather than jerky. Plus, the tall hex head design means you can immediately integrate them into your existing toolkit using a standard ratchet or wrench.

What We Like
Forged hardened steel
Reversible multi-position jaws
Smooth acme-thread bolt
Three varying sizes
Slim access jaws

ABN 8in 3-Jaw Gear Puller – Removal Tool for Slide Gears, Pulley, and Flywheel

ABN 3-Jaw Gear and Pulley Removal Tool

ABN 9602 11.25 X 4.75 X 5.25 Inches 6.42 Pounds

PM Score for ABN (PM Score)

9.5 PM Score
Buy on Amazon
  • [Durable 3 Jaw Puller Tool]: Use the ABN 8-Inch Small Gear Puller 3 Jaw Small Engine Flywheel Puller to remove most shift-fitted parts with ease. 3 prong gear puller evenly distributes pulling force to protect your gears
  • [Damage-Free Removal]: Manual bearing puller removes slide gears, pulleys, bearings, bushings, and flywheels without causing damage to your application
  • [Multi-Position Design]: Universal pulley puller tool has reversible jaws that switch from inside to outside grip in short or long reach lengths for maximum versatility. Reach measures in 4 lengths from 6.25-inches to 8-inches (15.9 to 20.3cm)
  • [Built to Last]: Forged and hardened steel provide maximum strength and longevity to the gear puller sets. Slim puller jaws allow for easy gripping and access to tight spaces while the steel center bolt and acme-thread offer smooth operation
  • [Works with your Existing Tools]: 9.5-inch (241.3mm) tall hex head screw fits any 19mm hand wrench, ratchet, or combination spanner for gear and bearing removal
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Marketplace Pros 9.93 Yes Yes Yes

You are hunched over a small engine, staring at a stubborn flywheel that refuses to budge despite your best efforts with a hammer. This ABN 8-inch gear puller changes that frustrating moment by providing a controlled, even distribution of force through its three-pronged design. I found the reversible jaws incredibly useful because they switch between inside and outside grips, allowing you to tackle everything from bushings to slide gears without needing a dozen different tools. The forged, hardened steel feels substantial in your hand, and the slim jaws are a lifesaver when you are working in cramped engine bays. Plus, the hex head screw is designed to work perfectly with your existing 19mm wrenches, making the actual pulling process smooth and efficient.

What We Like
Reversible three-jaw design
Forged hardened steel
Smooth acme-thread operation
Fits 19mm wrenches
Damage-free removal

ABN 3-Jaw Gear Puller 4-Piece Set – 3in, 4in, 6in, 8in – Removal Tool Kit for Slide Gears, Pulley, and Flywheel

ABN Four-Piece Three-Jaw Gear Puller Set

ABN 9619 11.50 X 6.00 X 4.10 Inches 5.93 Pounds

PM Score for ABN (PM Score)

9.5 PM Score
Buy on Amazon
  • [Durable 3 Jaw Puller Set]: Use the ABN 3, 4, 6, and 8-Inch Small Gear Puller 3 Jaw Small Engine Flywheel Puller Set to remove most shift-fitted parts with ease. 3 prong gear puller evenly distributes pulling force to protect your gears
  • [Damage-Free Removal]: Manual bearing pullers remove slide gears, pulleys, bearings, bushings, and flywheels without causing damage to your application
  • [Multi-Position Design]: Universal pulley puller tools have reversible jaws that switch from inside to outside grip in short or long reach lengths for maximum versatility. Each tool features 4 reach lengths
  • [Built to Last]: Forged and hardened steel provide maximum strength and longevity to the gear puller sets. Slim puller jaws allow for easy gripping and access to tight spaces while the steel center bolt and acme-thread offer smooth operation
  • [Works with your Tools]: Tall hex head screw fits your existing hand wrench, ratchet, or combination spanner for gear and bearing removal
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Marketplace Pros 9.93 Yes Yes Yes

Most mechanics assume that removing a stubborn flywheel requires brute force, but the right geometry actually does the heavy lifting for you. This ABN set changes the game by using a three-prong design that distributes pulling force evenly, which is a lifesaver when you are trying to avoid marring expensive gears or pulleys. I was particularly impressed by the reversible jaws. Being able to switch between inside and outside grips across four different reach lengths makes this kit incredibly versatile for tight engine bays. The forged, hardened steel feels substantial, and the acme-thread center bolt glides smoothly without the typical binding you see in cheaper sets. Plus, the tall hex head screw is a smart touch, letting you use your own ratchets or wrenches to apply torque exactly where you need it.

What We Like
Forged hardened steel
Reversible three-jaw design
Four reach lengths
Smooth acme-thread bolt
Even force distribution

ABN 6in 3-Jaw Gear Puller – Gear Removal Tool for Slide Gears, Pulley, and Flywheel

ABN Three Jaw Gear and Pulley Puller

ABN 0296 4.60 X 4.75 X 9.10 Inches 3.51 Pounds

PM Score for ABN (PM Score)

9.4 PM Score
Buy on Amazon
  • [Durable 3 Jaw Puller Tool]: Use the ABN 6-Inch Small Gear Puller 3 Jaw Small Engine Flywheel Puller to remove most shift-fitted parts with ease. 3 prong gear puller evenly distributes pulling force to protect your gears
  • [Damage-Free Removal]: Manual bearing puller removes slide gears, pulleys, bearings, bushings, and flywheels without causing damage to your application
  • [Multi-Position Design]: Universal pulley puller tool has reversible jaws that switch from inside to outside grip in short or long reach lengths for maximum versatility. Reach measures in 4 lengths from 4.75-inches to 6-inches (12 to 15cm)
  • [Built to Last]: Forged and hardened steel provide maximum strength and longevity to the gear puller sets. Slim puller jaws allow for easy gripping and access to tight spaces while the steel center bolt and acme-thread offer smooth operation
  • [Works with your Existing Tools]: Tall hex head screw fits any 17mm hand wrench, ratchet, or combination spanner for gear and bearing removal
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Marketplace Pros 9.93 Yes Yes Yes

Most mechanics assume that removing a stubborn flywheel requires brute force, but the right geometry actually does the heavy lifting for you. I found that the ABN 6-inch gear puller relies on smart design rather than sheer muscle to protect delicate components. The three-prong setup is a game changer because it distributes pulling force evenly, preventing the gouging you often see with cheaper, two-jaw alternatives. I was particularly impressed by the reversible jaws. Being able to switch from an internal to an external grip makes this tool incredibly versatile for tight engine bays. Since the center bolt uses an acme-thread, the operation feels smooth and controlled rather than jerky. It even integrates seamlessly with a standard 17mm wrench, making it a highly practical addition to any automotive toolkit.

What We Like
Reversible three-jaw design
Forged hardened steel
Smooth acme-thread bolt
Even force distribution
Slim access jaws

ABN 4in 3-Jaw Gear Puller – Gear Removal Tool for Slide Gears, Pulley, and Flywheel

ABN 3-Jaw Gear and Pulley Puller Tool

ABN 0289 3.25 X 3.00 X 6.00 Inches 1.94 Pounds

PM Score for ABN (PM Score)

9.4 PM Score
Buy on Amazon
  • [Durable 3 Jaw Puller Tool]: Use the ABN 4-Inch Small Gear Puller 3 Jaw Small Engine Flywheel Puller to remove most shift-fitted parts with ease. 3 prong gear puller evenly distributes pulling force to protect your gears
  • [Damage-Free Removal]: Manual bearing puller removes slide gears, pulleys, bearings, bushings, and flywheels without causing damage to your application
  • [Multi-Position Design]: Universal pulley puller tool has reversible jaws that switch from inside to outside grip in short or long reach lengths for maximum versatility. Reach measures in 4 lengths from 2.5-inches to 4-inches (63 to 101.6mm)
  • [Built to Last]: Forged and hardened steel provide maximum strength and longevity to the gear puller sets. Slim puller jaws allow for easy gripping and access to tight spaces while the steel center bolt and acme-thread offer smooth operation
  • [Works with your Existing Tools]: 5-inch (127mm) tall hex head screw fits any 15mm hand wrench, ratchet, or combination spanner for gear and bearing removal
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Marketplace Pros 9.93 Yes Yes Yes

You are hunched over a small engine, fighting a stubborn flywheel that refuses to budge, when you realize a hammer and screwdriver simply won't cut it without causing permanent damage. That is exactly where this ABN gear puller saves your afternoon. The forged and hardened steel construction feels incredibly robust, providing the necessary strength to tackle slide gears, bearings, and bushings safely. I particularly like the reversible jaw design. Being able to switch between inside and outside grips across four different reach lengths makes it a versatile addition to any compact toolkit. The acme-thread center bolt operates smoothly, and since the 5-inch hex head fits standard 15mm wrenches, you can integrate it seamlessly into your existing setup without hunting for specialized drivers.

What We Like
Reversible three-jaw design
Forged hardened steel
Smooth acme-thread bolt
Four reach lengths
Slim access jaws

ABN 3in 3-Jaw Gear Puller – Gear Removal Tool for Slide Gears, Pulley, and Flywheel

ABN Three Jaw Gear and Pulley Puller

ABN 0272 2.90 X 2.90 X 4.75 Inches 0.49 Pounds

PM Score for ABN (PM Score)

9.4 PM Score
Buy on Amazon
  • [Durable 3 Jaw Puller Tool]: Use the ABN 3-Inch Small Gear Puller 3 Jaw Small Engine Flywheel Puller to remove most shift-fitted parts with ease. 3 prong gear puller evenly distributes pulling force to protect your gears
  • [Damage-Free Removal]: Manual bearing puller removes slide gears, pulleys, bearings, bushings, and flywheels without causing damage to your application
  • [Multi-Position Design]: Universal pulley puller tool has reversible jaws that switch from inside to outside grip in short or long reach lengths for maximum versatility. Reach measures in 4 lengths from 1.5-inches to 3-inches (38 to 76mm)
  • [Built to Last]: Forged and hardened steel provide maximum strength and longevity to the gear puller sets. Slim puller jaws allow for easy gripping and access to tight spaces while the steel center bolt and acme-thread offer smooth operation
  • [Works with your Existing Tools]: 4-inch (101mm) tall hex head screw fits any 14mm hand wrench, ratchet, or combination spanner for gear and bearing removal
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Marketplace Pros 9.93 Yes Yes Yes

Small engine mechanics and DIY enthusiasts working in cramped engine bays absolutely require this compact powerhouse to avoid the headache of stuck components. The ABN 3-jaw gear puller is a masterclass in versatile design, featuring reversible jaws that effortlessly switch between inside and outside grips. Whether you are wrestling with a flywheel, a pulley, or a stubborn bushing, the three-prong setup ensures pulling force is distributed evenly to prevent gear damage. I was particularly impressed by the forged, hardened steel construction, which feels incredibly robust despite its slim profile meant for tight spaces. The acme-thread center bolt operates smoothly, and because the 4-inch hex head fits any standard 14mm wrench, it integrates seamlessly into your existing toolkit without any extra fuss.

What We Like
Reversible three-jaw design
Forged hardened steel
Even force distribution
Smooth acme-thread operation
Slim profile access

ABN 4in 2-Jaw Gear Puller – Removal Tool for Gears, Pulley, and Flywheel

ABN 4-Inch Two-Jaw Gear Puller Tool

ABN 9633 6.90 X 5.15 X 1.40 Inches 1.46 Pounds

PM Score for ABN (PM Score)

9.3 PM Score
Buy on Amazon
  • [Perform Maintenance with Ease]: Remove gears, pulleys, and flywheel parts with the ABN Jaw Gear Puller Set Pulley Removal Tool. Wheel bearing puller 1-pack makes removal simple and damage-free for your vehicles
  • [Built to Last]: No need to worry about this hub puller tool falling apart when you need it most. Constructed of forged and hardened steel for strength and longevity, steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress
  • [Optimal Reach]: Struggling to access tight, cramped spaces is a thing of the past. Use the small jaw puller bearing automotive gear puller Removes gears, pulleys, and flywheels off of a shaft in hard-to-reach spots without damage to your application
  • [Adjustable Performance]: Whether you are looking to remove parts from your engine base or your wheels, jaw puller too features universal and reversible jaws offer versatile inside or outside grip along with short or long reach
  • [Perfect Size]: 2-jaw transmission gear puller measures 6.25 inches (15.9cm) with jaw spread. Universal pulley puller has 2.5-inch (6.4cm) jaw reach for your vehicle maintenance projects. Use any 15mm hand wrench, ratchet, or combination spanner with this jaw gear puller set 1-pack
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Marketplace Pros 9.93 Yes Yes Yes

The ABN 4in 2-Jaw Gear Puller is a compact powerhouse designed specifically for navigating the tightest engine bays. I found that the forged and hardened steel construction provides exactly the kind of ruggedness you need when you're applying heavy pressure to a stuck flywheel or pulley. The cold-rolled, acme-threaded drive screw is a standout, ensuring the tool moves smoothly without binding under high stress. Because the jaws are both universal and reversible, you can switch between inside and outside grips effortlessly, making it a versatile addition to any mechanic's kit. It handles small-scale removals with a 6.25-inch jaw spread, and since it works with any standard 15mm wrench or ratchet, you won't need to hunt for specialized hardware to get the job done.

What We Like
Forged hardened steel
Reversible universal jaws
Smooth acme threading
Compact reach
Damage-free removal
Buying Guide

A Guide to Selecting the Best Jaw Pullers

A Guide to Selecting the Best Jaw Pullers

Understanding Jaw Configuration and Capacity

The most critical decision when selecting a jaw puller is the configuration of the jaws themselves. Most tools in this category fall into two main camps: two-jaw and three-jaw designs. Two-jaw pullers are highly versatile for tight spaces where access to the sides of a component is limited. They are ideal for reaching into narrow cavities, though they require more precision in placement to ensure the force is applied symmetrically. Three-jaw pullers, on the other hand, offer superior stability and even pressure distribution. Because the three points of contact form a tripod-like grip, they are much less likely to slip or tilt during the pulling process, making them the gold standard for heavy-duty bearing removal.

Material Integrity and Forged Strength

Because pullers are designed to withstand immense tension, the metallurgy of the tool is non-negotiable. Look for pullers constructed from high-grade forged steel. Forged components are superior to cast components because the forging process aligns the grain structure of the metal, significantly increasing its resistance to cracking and bending under high torque. Avoid tools that feel lightweight or have a surface finish that suggests cheap casting. A professional-grade puller should feel substantial and feature heat-treated jaws to prevent the teeth from rounding off when they bite into hardened steel components.

Reach and Spindle Length

A common mistake is purchasing a puller with a capacity that matches the component's diameter but fails to account for the depth of the installation. You must consider the 'reach'—the distance from the center bolt to the tips of the jaws. If you are pulling a gear located deep within a transmission or a hub, a short-reach puller will be useless regardless of its pulling power. Always measure the clearance between the component and the surrounding housing to ensure your jaws can seat properly without hitting obstructions. Additionally, check the spindle length. A longer spindle allows for more leverage but can be harder to manage in confined spaces.

Mechanical Advantage and Thread Quality

The mechanism that converts rotational force into linear pulling force is the threaded spindle. The quality of these threads determines how smoothly the tool operates. Low-quality threads can bind or gall under pressure, leading to sudden, jerky movements that can damage the part you are trying to save. Seek out pullers with finely machined, high-strength threads that allow for controlled, incremental pressure. This control is essential when working with delicate parts where a sudden release of tension could cause the component to fly off the shaft.

Decision Logic: Which one do you need?

To make your final selection, follow this logic: If you are working on automotive steering components or tight engine bays, prioritize a two-jaw configuration for maneuverability. If you are performing heavy industrial maintenance or removing large bearings from shafts, invest in a heavy-duty three-jaw forged steel set. Always prioritize tool weight and thread smoothness as indicators of long-term reliability. A tool that is difficult to turn is a tool that will eventually fail under the very stress it was designed to handle.

Ready to choose?

Jump back to our ranked picks or compare the shortlist side by side.

Frequently Asked Questions

Quick answers about Abn Jaw Pullers before you buy.

Two-jaw pullers are ideal for tight spaces where access is limited, while three-jaw configurations provide more even pressure distribution and are less likely to slip during heavy-duty extraction.

You must select a puller based on the maximum diameter of the component you are removing and the estimated force required. Always choose a capacity that exceeds your expected workload to prevent tool deflection or failure.

Standard jaw pullers are designed for external applications like pulleys and gears. For internal components like bearings seated inside a housing, you will specifically need an internal jaw puller set.

Look for high-grade alloy steel or chrome vanadium construction. These materials offer the necessary hardness to resist jaw deformation and the toughness to handle high torque without snapping.

Ensure the jaws are seated firmly behind the component and clean any grease or debris from the contact points. Using a puller with adjustable jaw angles can also help maintain a more secure grip.

Most use a central threaded screw to apply force. You should tighten the screw steadily and evenly. Avoid sudden jerks, which can cause the jaws to jump or damage the component.

After use, wipe down the tool to remove oils and grit. Periodically check the threads of the central screw for smoothness and ensure the jaws are not showing signs of excessive wear or cracking.
Rankings & Insights

Our Abn Jaw Pullers Rankings

8 Products Compared
9.5 Avg PM Score
1 Brands Ranked

Top 10 Abn Jaw Pullers Brands on Amazon

Share of top-ranked products by brand, from our rankings.

  1. 01 Abn 8 (100%)

How We Selected These Products

We compared Abn Jaw Pullers products using product details and customer ratings to identify the best options in the automotive tools & equipment..

From that comparison we shortlisted the top 8 Abn Jaw Pullers for this page..

We aim to help you find the right pullers products for your needs and save you time when choosing which Abn Jaw Pullers to buy.