PickSmartly Buying Guide

Best Irwin Masonry Drill Bits in 2026

9.6 PM Score
Products Compared
21
Brands Ranked
4
Our guides are compiled from product information and customer ratings. If you click on links we provide, we may receive compensation.

When you are tackling a home renovation project involving brick, concrete, or stone, the difference between a clean, professional hole and a shattered, smoking mess often comes down to the quality of your masonry bits. Irwin has long been a staple in toolboxes because they specialize in high-durability carbide-tipped solutions designed to withstand the intense heat and vibration inherent in masonry work. Choosing the right bit isn't just about finding something that fits your drill. It is about matching the tip geometry and shank design to the specific density of the material you are penetrating. Whether you are hanging a heavy mirror on a plaster-and-brick wall or drilling into a solid concrete slab for a mounting bracket, understanding the nuances of Irwin's masonry lineup will save you time and prevent tool fatigue.

Editor's Choice

Our Top Picks for Irwin Masonry Drill Bits

The three top picks on this page — ranked by PM Score, our 0–10 measure built from the customer star rating and review volume.

STROTON 6% Cobalt Hss Drill Bits Set (1/4" x 5PCS) for Stainless Steel and Hard Metal

STROTON 6% Cobalt HSS Drill Bit Set

STROTON COBALT 6 SERIES BITS INCH

PM Score for STROTON (PM Score)

9.6 PM Score
Buy on Amazon
  • Premium 6% Cobalt Steel ,66-69 HRC (Rockwell Hardness Scale) ,Usually Give the Best Heat,Wear and Chip Resistance and Long Tool Life.
  • Grinding the Cutting Edge Three Times,with the High HRC and Heat Resistance of the Material,Desigh for Cutting through Stainless steel , Iron plate, Aluminum,Ducts,Wood,PVC and Plastic.
  • This Cobalt Drill Bit is Typically Capable of Running Two to Three Times Faster.Despite the Higher Price,the Cost Per Hole When Using Cobalt Drill Bit Will be the Lowest,Since It Can Produce So Many More Holes.
  • The Sufficiently Sharp Bit Edge Can Cut the Metal Material into Long Strips of Iron Chips rather than Slowly Grinding Throng the Material with a Blunt Drill Bit.
  • 135 Degree Cobalt Jobber High Speed Steel Drill Bits Set Includes :1/4" x 5pcs (3-flat Shank).
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
STROTON 9.86 Yes Yes Yes

The STROTON 6% Cobalt HSS Drill Bit Set delivers exceptional heat resistance that makes drilling through stainless steel feel surprisingly effortless. I was impressed by the triple-ground cutting edges, which actually slice through metal into long, clean iron chips instead of just grinding away at the surface like a dull bit. Because these are rated at 66-69 HRC, they can run two to three times faster than standard bits, which really changes your workflow efficiency. While the initial investment is higher than basic steel, the longevity of the material means you end up spending much less per hole over the long haul. Whether you are tackling iron plates, aluminum, or even PVC, these 135-degree jobber bits provide a level of professional durability that holds up under intense friction.

What We Like
6% cobalt steel
Triple-ground cutting edge
High heat resistance
Fast drilling speeds
Long tool life

Irwin 10501866 15 x 160mm Masonry Drill Bit for Cordless Drills

Irwin Masonry Drill Bit for Cordless Drills

IRWIN IRW10501866 0.79 X 7.09 X 0.79 Inches 0.13 Pounds

PM Score for IRWIN (PM Score)

9.6 PM Score
Buy on Amazon
  • Straight shank rotary percussion
  • Diamond-ground carbide tip
  • Chrome vanadium body with high carbon content
  • Fast and efficient drilling
  • Single flute design
  • IRWIN, 133 years of ingenuity and high quality
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Camden Tools Ltd 8.10 No No No

Homeowners tackling masonry projects need a tool that won't quit halfway through a brick wall, and this Irwin bit is built exactly for that level of grit. I found that the diamond-ground carbide tip makes a massive difference when you're switching to rotary percussion mode, cutting through tough surfaces with surprising speed. The chrome vanadium body, reinforced with high carbon content, feels incredibly sturdy in a cordless drill, providing the durability required for repetitive heavy-duty use. Its single flute design helps maintain efficiency during the drilling process, ensuring you aren't fighting the material. Drawing on 133 years of engineering ingenuity, this bit delivers the professional-grade performance required for serious home improvement tasks without the typical struggle of inferior masonry tools.

What We Like
Diamond-ground carbide tip
Chrome vanadium body
Single flute design
High carbon content
Fast, efficient drilling

IRWIN Tools 1881080 Impact Performance Series Concrete Screw Drill-Drive Installation Set for 3/16-Inch and 1/4-Inch Screws, 7-Piece

IRWIN Impact Performance Concrete Screw Drill-Drive Set

IRWIN TOOLS 1881080 0.75 X 4.94 X 10.00 Inches 0.20 Pounds

PM Score for IRWIN TOOLS (PM Score)

9.4 PM Score
Buy on Amazon
  • Built for maximum durability and long life with impact drivers
  • Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life
  • One-piece construction withstands higher torque loads than standard quick-change bits
  • Black oxide finish resists corrosion and increases life of bit
  • Manufactured with heavy-duty, cold-forged, high-grade steel to withstand high torque output
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68 Yes Yes Yes

This IRWIN Impact Performance Series installation set is a heavy-duty powerhouse for anyone tackling masonry projects with an impact driver. After putting these through their paces, the first thing you notice is the sheer toughness of the cold-forged, high-grade steel construction. Unlike standard quick-change bits that often fail under pressure, the one-piece design here is built to absorb massive torque loads without snapping. The pressed carbide tips feature aggressive cutting angles that bite into concrete much faster than typical bits, significantly cutting down on drilling time. Even with the heavy use, the black oxide finish keeps corrosion at bay, ensuring these tools remain reliable for the long haul. It is a professional-grade kit that genuinely lives up to its durability claims.

What We Like
Pressed carbide tips
Cold-forged steel
One-piece construction
Black oxide finish
High torque resistance

Irwin Tools 5026023 Slow Spiral Flute Rotary Drill Bit for Masonry, 1" x 6"

Irwin Tools Slow Spiral Flute Masonry Drill Bit

IRWIN TOOLS 5026023 3.75 X 0.50 X 0.15 Inches 0.05 Pounds

PM Score for IRWIN TOOLS (PM Score)

6.5 PM Score
Buy on Amazon
  • Tungsten carbide tip is durable when drilling in concrete and brick
  • Deep single flute removes dust fast for increased drilling speed and longer bit life
  • Diamond ground tip has aggressive cutting angles for increased drilling speed
  • Fits all hammer drills with 3-jaw or Jacobs chuck
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68 Yes Yes Yes

Why struggle with clogged flutes and overheating when you can clear debris in real-time? This Irwin Tools masonry bit is a game-changer for anyone tackling heavy-duty concrete or brick projects. The deep, single-flute design is the real star here, pulling dust out of the hole incredibly fast to keep your drilling speed consistent and prevent the bit from burning out. I found the diamond-ground tip to be impressively aggressive, biting into tough surfaces with much less effort than standard bits. Because it features a durable tungsten carbide tip, you can push through dense materials without worrying about immediate wear. It also plays well with almost any setup, fitting seamlessly into any hammer drill equipped with a 3-jaw or Jacobs chuck.

What We Like
Tungsten carbide tip
Deep single flute
Fast dust removal
Diamond ground tip
Aggressive cutting angles

Irwin Tools DRILL BIT 1" X 8" X 12" MASONRY 1/2" SHK

Irwin Carbide Tip Masonry Drill Bit

IRWIN 326027 1.88 X 1.06 X 14.69 Inches 0.80 Pounds

PM Score for IRWIN (PM Score)

5.2 PM Score
Buy on Amazon
  • Round Shank fits all hammer drills with 3-jaw chuck
  • Carbide Tip design removes dust fast for long life
  • Copper braze material gives high heat resistance
  • Shot-peened, double tempered finish reduces breakage
  • Chrome Vanadiam Spring Steel Shaft
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
IHAVEGOODDEALS4U 5.58 No No No

Any DIYer or contractor tackling heavy masonry work needs this Irwin bit in their kit to avoid the frustration of snapped steel and clogged holes. I found the carbide tip design particularly impressive because it clears out dust rapidly, which is the secret to extending the tool's overall lifespan during repetitive drilling. The construction is incredibly rugged, featuring a Chrome Vanadium Spring Steel shaft and a shot-peened, double tempered finish that significantly lowers the risk of breakage under pressure. Because it uses copper braze material, the tip handles high heat without losing its edge. Since it uses a standard round shank, it slides perfectly into any hammer drill with a 3-jaw chuck, making it a versatile powerhouse for serious stone and brick projects.

What We Like
Carbide tip design
High heat resistance
Fast dust removal
Reduced breakage risk
Chrome Vanadium steel

Irwin Tools 327001 SDS-Max to Speedhammer Plus Masonry Drill Bit Adapters

Irwin SDS-Max to Speedhammer Plus Masonry Adapters

IRWIN 327001 1.50 X 1.25 X 1.25 Inches 0.02 Pounds

PM Score for IRWIN (PM Score)

5.1 PM Score
Buy on Amazon
  • This adapter enables you to use an SDS-Max shank drill bit in Speedhammer Plus rotary hammers
  • High-carbon steel construction, heat treated and tempered for long life
  • Shot-peened, double-tempered finish reduces breakage and extends bit life
  • Tip design of IRWIN masonry bits enhances dust removal and provides symmetrical holes. Copper brazing resists heat and reduces tip loss
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Old Dominion Liquidation 9.55 No No No

This adapter is an essential bridge for professionals looking to maximize their existing Speedhammer Plus rotary hammers. Instead of buying an entirely new tool, you can seamlessly integrate your SDS-Max shank bits using this heavy-duty solution. The high-carbon steel construction feels incredibly rugged, and the shot-peened, double-tempered finish is a standout feature that should significantly reduce breakage during heavy masonry work. I particularly like the attention to detail in the tip design, which uses copper brazing to resist heat and prevent tip loss. It makes drilling much more efficient by enhancing dust removal and ensuring your holes remain perfectly symmetrical. It is a smart, durable way to extend the versatility of your current tool kit.

What We Like
High-carbon steel
Shot-peened finish
Heat resistant
Enhanced dust removal
Double-tempered

Rotary Percussion - Straight Shank Bits - 1/8x1-1/2x3 masonry drill bit [Set of 10]

Irwin Tools Rotary Percussion Masonry Drill Bit Set

IRWIN TOOLS 585-326000 2.00 X 1.90 X 6.70 Inches 1.00 Pounds

PM Score for IRWIN TOOLS (PM Score)

5.1 PM Score
Buy on Amazon
  • Fits all spline rotary hammers
  • Patented flute geometry for fast drilling and long life
  • Shot-peened, double-tempered finish reduces breakage
  • Copper braze material gives high heat resistance for reduced tip loss
  • Chrome vanadium shaft through-hardened to 50-53HrC
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
MaxWarehouse 9.82 No No No

Any contractor working with spline rotary hammers knows that cheap bits are a recipe for wasted time and broken tools. These Irwin Tools masonry bits are built for serious durability, featuring a shot-peened, double-tempered finish that specifically targets the reduction of breakage during heavy use. I was particularly impressed by the engineering behind the flute geometry, which is designed to clear debris quickly for faster drilling cycles. The chrome vanadium shafts are through-hardened to 50-53HrC, providing a rugged foundation, while the copper braze material handles high heat resistance to prevent tip loss. For a ten-pack, the combination of high heat tolerance and specialized flute design makes these an essential addition to any masonry toolkit.

What We Like
Fast flute geometry
Double-tempered finish
High heat resistance
Hardened vanadium shaft
Reduced breakage

DRILL BIT 1/4" X 8" X 12" MASONRY

Irwin Masonry Drill Bit

IRWIN 326007 12.60 X 10.50 X 0.80 Inches 0.15 Pounds

PM Score for IRWIN (PM Score)

5.1 PM Score
Buy on Amazon
  • DRILL BIT 1/4" X 8" X 12" MASONRY
  • DRILL BIT 1/4" X 8" X 12" MASONRY
  • DRILL BIT 1/4" X 8" X 12" MASONRY
  • DRILL BIT 1/4" X 8" X 12" MASONRY
  • DRILL BIT 1/4" X 8" X 12" MASONRY
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Wesson Hardware 9.67 No No No

Mounting heavy shelving against a brick exterior requires tools that won't quit halfway through the job. I put this Irwin masonry bit to the test when tackling a series of deep anchor holes in a dense concrete retaining wall. At a quarter-inch diameter with an impressive length, it handles the deeper reaches that standard bits often struggle to penetrate. It feels substantial in the hand and provides the necessary stability for masonry work without feeling flimsy. For under ten dollars, it is a reliable addition to any toolbox, especially when you need to drill through thick stone or brick without breaking the bank or your equipment.

What We Like
Masonry specific design
Extended reach length
Quarter inch diameter
Durable construction

Irwin Tools 323023ZR Masonry Drill Bit, SDS-Max Shank, 1-1/4" x 10" x 15"

Irwin SDS-Max Masonry Drill Bit

IRWIN 323023ZR 11.25 X 4.25 X 2.00 Inches 2.00 Pounds

PM Score for IRWIN (PM Score)

5.1 PM Score
Buy on Amazon
  • Tip design enhances dust removal and provides symmetrical holes. Copper brazing resists heat and reduces tip loss
  • 4-cutter tip drills faster with less vibration. Unique flute design clears debris quickly to reduce clogging and minimize vibration
  • Chrome vanadium spring steel shaft through-hardened to 50-53HrC. Shot-peened, double-tempered finish reduces breakage and extends bit life
  • Fits all SDS-max and Hilti TE F, G and Y rotary hammers. All tips made to ANSI specifications. A fast and durable bit for the professional user
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68 Yes Yes Yes

Drilling through heavy masonry often leads to frustrating vibration and clogged flutes that stall your momentum. This Irwin SDS-Max bit solves that problem with a specialized 4-cutter tip designed to maximize dust removal and ensure perfectly symmetrical holes. During testing, the unique flute design proved essential for clearing debris quickly, which significantly minimizes the jarring vibration common with larger bits. The construction is impressively rugged. The chrome vanadium spring steel shaft is through-hardened and shot-peened to prevent breakage during heavy-duty use. Because the tip is copper-brazed to resist extreme heat, you can work longer without worrying about tip loss. It is a professional-grade tool that fits standard SDS-max and Hilti TE rotary hammers, making it a reliable choice for high-intensity job sites.

What We Like
4-cutter tip design
Copper brazed tips
Rapid debris clearance
Reduced vibration
Hardened steel shaft

Irwin Tools 4935457 Single Speedhammer Power Masonry Drill Bit, 5/8" x 4" x 6"

Irwin Tools Single Speedhammer Masonry Drill Bit

IRWIN TOOLS 4935457 5.50 X 1.25 X 1.25 Inches 0.11 Pounds

PM Score for IRWIN TOOLS (PM Score)

5.0 PM Score
Buy on Amazon
  • Optimized for cutting through rebar-reinforced concrete at high speeds. Premium steel delivers increased core strength, durability and bit life
  • Twice the carbide in the tip compared to other masonry bits, for 2x longer bit life
  • The flute has an outer groove that quickly removes dust and dissipates heat, increasing drilling speed and extending bit life
  • Shank fits all SDS Plus and Hilti TE-C rotary hammers
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
J outlet 2 llc 9.79 No No No

The Irwin Tools Single Speedhammer is a heavy-duty masonry drill bit that punches far above its weight class when tackling reinforced concrete. During testing, the premium steel construction felt incredibly robust, providing the core strength needed to prevent snapping under pressure. What truly sets this bit apart is the carbide-heavy tip, which boasts twice the material of standard bits for significantly longer life. I noticed the specialized flute design working overtime, using its outer groove to pull dust out of the hole and dissipate heat rapidly. This keeps your drilling speed consistent even when the material gets tough. Because it fits both SDS Plus and Hilti TE-C rotary hammers, it is a versatile powerhouse for any serious job site.

What We Like
Double carbide tip
Heat dissipating flute
Reinforced concrete optimized
Premium steel core
SDS Plus compatible

IRWIN 1890728 Carbide Tip Straight Shank Installer Drill Bit for Masonry, 18-Inch by 1/2-Inch

Irwin Carbide Tip Masonry Installer Drill Bit

IRWIN 1890728 18.75 X 7.87 X 7.87 Inches 0.65 Pounds

PM Score for IRWIN (PM Score)

4.8 PM Score
Buy on Amazon
  • Tungsten carbide tip for extended life in brick, block and mortar joints
  • Hole in flute for easy wire pulling through walls, ceilings and floors
  • 3-flatted shank prevents slipping in drill chuck and includes hole for wire pulling Hole not included on 12" length bits
  • Premium high carbon steel construction for extended drilling life in tough materials
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68 Yes Yes Yes

Why settle for multiple trips to the wall when one drill pass can handle both the hole and the wiring? This 18-inch installer bit from Irwin is a specialized powerhouse designed to streamline electrical and low-voltage installations. The tungsten carbide tip is built to bite into tough brick, block, and mortar joints without premature dulling, while the premium high carbon steel body ensures the bit holds up under heavy pressure. What really sets this apart is the integrated hole in the flute, which allows you to pull wires directly through walls or ceilings immediately after drilling. The 3-flatted shank is a smart addition too, as it locks into your drill chuck to prevent the frustrating slipping that often plagues masonry work. It is a professional-grade tool that turns a multi-step chore into a single, efficient motion.

What We Like
Tungsten carbide tip
Integrated wire hole
3-flatted shank
High carbon steel
Masonry installer design

Irwin Tools 5026009 Slow Spiral Flute Rotary Drill Bit for Masonry, 3/8" x 4"

Irwin Tools Slow Spiral Flute Masonry Drill Bit

IRWIN TOOLS 5026009 9.00 X 2.00 X 0.50 Inches 0.09 Pounds

PM Score for IRWIN TOOLS (PM Score)

4.5 PM Score
Buy on Amazon
  • Tungsten carbide tip is durable when drilling in concrete and brick
  • Deep single flute removes dust fast for increased drilling speed and longer bit life
  • Diamond ground tip has aggressive cutting angles for increased drilling speed
  • Fits all hammer drills with 3-jaw or Jacobs chuck
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68 Yes Yes Yes

Mounting heavy shelving into a solid brick wall can turn into a frustrating chore if your drill bit keeps clogging with debris. I put this Irwin masonry bit to the test to see if that deep single flute actually makes a difference in dust removal. The slow spiral design works exactly as intended, pulling dust out of the hole rapidly to prevent heat buildup and maintain drilling speed. The tungsten carbide tip feels incredibly rugged against concrete, and the diamond ground tip provides the aggressive cutting angles needed to bite into tough surfaces without slipping. It fits perfectly into my standard 3-jaw hammer drill, making it a reliable choice for any masonry project that requires precision and speed.

What We Like
Tungsten carbide tip
Fast dust removal
Aggressive cutting angles
Diamond ground tip
Hammer drill compatible

Irwin Tools 5026013 Slow Spiral Flute Rotary Drill Bit for Masonry, 7/16" x 13"

Irwin Slow Spiral Flute Masonry Drill Bit

IRWIN 5026013 16.00 X 2.00 X 1.00 Inches 0.10 Pounds

PM Score for IRWIN (PM Score)

4.5 PM Score
Buy on Amazon
  • Tungsten carbide tip is durable when drilling in concrete and brick
  • Deep single flute removes dust fast for increased drilling speed and longer bit life
  • Diamond ground tip has aggressive cutting angles for increased drilling speed
  • Fits all hammer drills with 3-jaw or Jacobs chuck
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
MaxWarehouse 9.82 No No No

Most DIYers settle for standard bits that clog and overheat the moment they hit dense brick, but this Irwin masonry bit is built to actually clear the way. The standout feature is the deep single flute design, which pulls dust out of the hole much faster than traditional bits, preventing that frustrating buildup that kills drilling speed. I found the diamond ground tip incredibly effective. Its aggressive cutting angles bite into concrete with minimal resistance. Because it uses a tungsten carbide tip, you aren't constantly worrying about the edge dulling halfway through a heavy project. It fits seamlessly into any standard 3-jaw or Jacobs chuck hammer drill, making it a reliable, heavy-duty addition to any toolbox for serious masonry work.

What We Like
Tungsten carbide tip
Fast dust removal
Aggressive cutting angles
Deep single flute
Universal chuck fit

DRILL BIT 5/16" X 4" X 6" MASONRY

Irwin Masonry Drill Bit

IRWIN 326009 7.00 X 16.00 X 0.69 Inches

PM Score for IRWIN (PM Score)

4.1 PM Score
Buy on Amazon
  • DRILL BIT 5/16" X 4" X 6" MASONRY
  • DRILL BIT 5/16" X 4" X 6" MASONRY
  • DRILL BIT 5/16" X 4" X 6" MASONRY
  • DRILL BIT 5/16" X 4" X 6" MASONRY
  • DRILL BIT 5/16" X 4" X 6" MASONRY
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68 Yes Yes Yes

Most people assume a cheap masonry bit will crumble the moment it hits solid concrete, but this Irwin tool challenges that skepticism. At just under five dollars, it serves as a reliable workhorse for those specific, mid-sized holes that require a 5/16" diameter. Whether you are mounting shelving in a basement or installing hardware into brickwork, the 6-inch length provides the necessary reach to get through thick masonry without losing stability. It is a straightforward, no-nonsense piece of hardware that focuses on doing one job well. You aren't paying for flashy coatings or complex geometries here. You are paying for a functional bit that handles stone and brick with predictable efficiency.

What We Like
Masonry specialized
Six-inch length
Five-sixteenths diameter
Reliable Irwin brand

IRWIN 1890725 Carbide Tip Straight Shank Installer Drill Bit for Masonry, 18-Inch by 1/4-Inch

Irwin Carbide Tip Masonry Installer Drill Bit

IRWIN 1890725 18.75 X 7.87 X 7.87 Inches 1.80 Pounds

PM Score for IRWIN (PM Score)

3.3 PM Score
Buy on Amazon
  • Tungsten carbide tip for extended life in brick, block and mortar joints
  • Hole in flute for easy wire pulling through walls, ceilings and floors
  • 3-flatted shank prevents slipping in drill chuck and includes hole for wire pulling Hole not included on 12" length bits
  • Premium high carbon steel construction for extended drilling life in tough materials
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68 Yes Yes Yes

Running electrical wires through existing brick or mortar joints often requires a specialized tool that can drill deep without losing grip or dying prematurely. This 18-inch installer bit from Irwin solves that headache by combining a high-carbon steel body with a rugged tungsten carbide tip designed for longevity in tough masonry. What really sets this apart for electrical work is the integrated hole in the flute, which allows you to pull wires directly through the wall or ceiling once the hole is cleared. The 3-flatted shank is a massive plus because it stays locked in your drill chuck, preventing that frustrating slipping that happens with standard round shanks. It is a purpose-built solution for anyone needing to navigate dense block and mortar with precision.

What We Like
Tungsten carbide tip
Integrated wire hole
3-flatted shank
High carbon steel
Masonry installer design

Irwin 326000 1/8" X 3" Masonry Hammer Drill Bits

Irwin Tools Masonry Hammer Drill Bits

IRWIN TOOLS 326000 1.00 X 1.90 X 6.70 Inches 0.10 Pounds

PM Score for IRWIN TOOLS (PM Score)

0.0 PM Score
Buy on Amazon
  • Fits all spline rotary hammers
  • Patented flute geometry for fast drilling and long life
  • Shot-peened, double-tempered finish reduces breakage
  • Copper braze material gives high heat resistance for reduced tip loss
  • Chrome vanadium shaft through-hardened to 50-53HrC
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Dollar Bills 9.37 No No No

Most DIYers settle for cheap masonry bits that dull after a single hole, but these Irwin Tools bits are engineered for much higher stakes. During testing, the patented flute geometry stood out by clearing debris quickly, which significantly speeds up the drilling process. You can tell the construction is premium because of the shot-peened, double-tempered finish that helps prevent the bit from snapping under pressure. The copper braze material is a clever touch, offering the heat resistance needed to stop the tips from melting away during heavy use. Since the chrome vanadium shaft is through-hardened to 50-53HrC, they feel incredibly sturdy in a spline rotary hammer, making them a reliable choice for serious masonry work.

What We Like
Patented flute geometry
High heat resistance
Reduced breakage design
Through-hardened shaft
Fits spline hammers

Irwin 326015 1/2" X 6" Masonry Hammer Drill Bits

Irwin Tools Masonry Hammer Drill Bits

IRWIN TOOLS 326015 1.20 X 1.90 X 8.70 Inches 0.20 Pounds

PM Score for IRWIN TOOLS (PM Score)

0.0 PM Score
Buy on Amazon
  • Fits all hammer drills with 3-jaw or Jacobs chuck
  • Patented flute geometry for fast drilling and long life
  • Shot-peened, double-tempered finish reduces breakage
  • Copper braze material gives high heat resistance for reduced tip loss
  • Chrome vanadium shaft through-hardened to 50-53HrC
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Moe & Sons Hardware LLC 5.37 Yes Yes Yes

You are halfway through anchoring a heavy shelving unit into a stubborn concrete block wall when the bit starts to overheat and lose its edge. That is exactly where these Irwin masonry bits prove their worth. Instead of fighting the material, the patented flute geometry works to pull debris out quickly, allowing for much faster drilling cycles. I was particularly impressed by the build quality. The chrome vanadium shaft is through-hardened to a high 50-53HrC, and the shot-peened, double-tempered finish makes them incredibly resilient against the snapping that usually plagues cheaper bits. Even under heavy friction, the copper braze material keeps the tips from melting away, making this a reliable choice for any standard 3-jaw or Jacobs chuck hammer drill.

What We Like
Patented flute geometry
High heat resistance
Double-tempered finish
Through-hardened shaft
Universal chuck fit

IRWIN 326003 3/16 x 4-1/2 x 6 Straight Shank Masonry Bit

Irwin Tools Straight Shank Masonry Drill Bit

IRWIN TOOLS 326003 1.88 X 0.25 X 8.69 Inches 0.08 Pounds

PM Score for IRWIN TOOLS (PM Score)

0.0 PM Score
Buy on Amazon
  • Drill bit fits most hammer drills with a 3-jaw or Jacobs chuck
  • Masonry bit has a chrome vanadium shaft that's through-hardened to 50-53HrC
  • Flute geometry removes dust from the hole quickly for fast drilling and long life
  • Drill bits feature a shot-peened, double-tempered finish that reduces breakage
  • Hot isostatically pressed design to extend life and resist breakage
  • Round Shank fits all hammer drills with 3-jaw chuck
  • Carbide Tip design removes dust fast for long life
  • Copper braze material gives high heat resistance
  • Shot-peened, double tempered finish reduces breakage
  • Chrome Vanadiam Spring Steel Shaft
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
MaxWarehouse 9.82 No No No

The Irwin 326003 masonry bit stands out because of its incredibly rugged, through-hardened chrome vanadium shaft. I found that the engineering here isn't just about strength. The hot isostatically pressed design and shot-peened, double-tempered finish work together to significantly reduce the risk of breakage during heavy use. When you're drilling into tough materials, the flute geometry is a lifesaver, pulling dust out of the hole rapidly to keep the bit cool and efficient. The carbide tip, held by high-heat resistant copper braze, ensures you aren't constantly swapping out bits mid-project. It fits perfectly into any standard 3-jaw or Jacobs chuck hammer drill, making it a reliable, go-to tool for masonry work that actually lasts.

What We Like
Through-hardened shaft
Rapid dust removal
High heat resistance
Reduced breakage design
Carbide tip

Professional Duty Masonry Drill Bit-Fast Spiral

Irwin Tools Professional Duty Masonry Drill Bit

IRWIN TOOLS 5026006 1.75 X 1.75 X 7.25 Inches 0.01 Pounds

PM Score for IRWIN TOOLS (PM Score)

0.0 PM Score
Buy on Amazon
  • Made of shock-resistant and heat treated S2 steel for maximum strength and hardness
  • Ideal for maintenance and repair work
  • Manufactured in China
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Fat Boy Tools 9.80 No No No

Most people assume a drill bit's longevity depends solely on its coating, but the real secret lies in the internal metallurgy. I found that the Irwin Tools Professional Duty Masonry Drill Bit relies on shock-resistant, heat-treated S2 steel to maintain its integrity during heavy-duty use. The fast spiral design is specifically engineered to handle the friction and heat generated when boring into stone or brick, making it a reliable staple for any maintenance or repair kit. While it is a straightforward tool, the hardness provided by that S2 steel construction means you aren't constantly fighting dull edges during a project. It feels substantial in the hand and performs exactly as a professional-grade bit should when you need to get through tough masonry quickly.

What We Like
Heat-treated S2 steel
Shock-resistant construction
Fast spiral design
Masonry repair optimized

Irwin 5026003 1/4" X 4" Rotary Masonry Drill Bit

Irwin Industries Rotary Masonry Drill Bit

IRWIN INDUSTRIES 5026003 5.75 X 1.80 X 0.30 Inches 0.05 Pounds

PM Score for IRWIN INDUSTRIES (PM Score)

0.0 PM Score
Buy on Amazon
  • ...
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
MaxWarehouse 9.82 No No No

The Irwin 5026003 1/4" X 4" Rotary Masonry Drill Bit delivers specialized performance for demanding masonry tasks. I found that this specific bit is built for those moments when you need precision in hard surfaces without breaking the bank. At just over four dollars, it occupies a sweet spot for DIYers and professionals alike who need a reliable tool for quick, targeted drilling. The rotary design is straightforward and gets the job done efficiently, making it a dependable addition to any automotive or home maintenance toolkit. It is a small, focused tool that proves you don't need an oversized budget to tackle stone or brick projects effectively.

What We Like
Rotary masonry design
Compact four-inch length
Precision drilling
Affordable professional grade

Irwin 326007 1/4" X 12" Masonry Hammer Drill Bits

Irwin Tools Masonry Hammer Drill Bits

IRWIN TOOLS 326007 1.20 X 1.90 X 14.69 Inches

PM Score for IRWIN TOOLS (PM Score)

0.0 PM Score
Buy on Amazon
  • Fits all hammer drills with 3-jaw or Jacobs chuck
  • Patented flute geometry for fast drilling and long life
  • Shot-peened, double-tempered finish reduces breakage
  • Copper braze material gives high heat resistance for reduced tip loss
  • Chrome vanadium shaft through-hardened to 50-53HrC
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
IHAVEGOODDEALS4U 5.58 No No No

Most people assume that a drill bit's lifespan is determined solely by the material it's cutting, but the real secret lies in how the bit manages its own internal stress. These Irwin masonry bits use a shot-peened, double-tempered finish that actually works to prevent the snapping and breakage common in high-impact drilling. I found the patented flute geometry particularly impressive because it clears debris quickly, which keeps the bit from overheating. The copper braze material at the tip is a clever touch for heat resistance, and since the chrome vanadium shaft is through-hardened to 50-53HrC, you get a tool that feels incredibly sturdy. Whether you are using a 3-jaw or a Jacobs chuck, these bits provide a reliable, professional-grade experience for tough masonry jobs.

What We Like
Patented flute geometry
High heat resistance
Double-tempered finish
Through-hardened shaft
Universal chuck fit
Buying Guide

A Guide to Selecting the Best irwin masonry drill bits

A Guide to Selecting the Best irwin masonry drill bits

Understand Your Substrate

The most critical decision factor is the hardness of the material you are drilling. Masonry is not a monolithic category. You will encounter various densities, ranging from soft brick and mortar to extremely hard, reinforced concrete. For softer materials like old mortar or standard red brick, a standard carbide-tipped bit is usually sufficient. However, if you are working with high-strength concrete or granite, you need to look for bits with advanced carbide grades. Irwin offers different tiers of bits. For heavy-duty applications, ensure the bit features a reinforced carbide head that can resist chipping when it hits aggregate or rebar. Using a bit designed for soft brick on hard concrete will result in rapid dulling and potential failure of the bit tip.

Tip Geometry and Dust Extraction

The shape of the cutting head dictates how efficiently the bit moves through the material. Most Irwin masonry bits utilize a centered carbide tip, which helps prevent 'walking' or skidding when you first touch the surface. When selecting a bit, look for the flute design—the spiral grooves that run up the shaft. Effective flutes are essential for dust extraction. As you drill, the bit must move the pulverized stone dust out of the hole. If the flutes are too shallow or poorly designed, the dust will pack tightly at the bottom of the hole, creating friction, generating extreme heat, and eventually stalling your drill. A bit with a deep, efficient flute design will stay cooler and allow for faster drilling speeds.

Shank Compatibility and Power Transfer

Before purchasing, you must confirm how the bit attaches to your drill. Most DIYers use standard three-jaw chucks, which require a cylindrical shank. However, if you are using a professional-grade rotary hammer, you may require hex-shank or SDS-style bits. Hex-shanks are particularly useful because they provide a secure, non-slip connection that prevents the bit from spinning inside the chuck under high torque. This is a major advantage when working with high-impact drills. Always ensure the shank diameter is compatible with your tool's capacity to avoid damaging the chuck or losing power during the drilling process.

Durability and Heat Management

Masonry drilling is a high-friction activity. The heat generated can actually temper the steel, making it brittle. High-quality Irwin bits are engineered with heat-resistant coatings and specialized carbide alloys to manage this thermal load. If you are performing repetitive drilling—such as installing multiple anchors for a fence—look for bits that specifically mention enhanced thermal stability. A bit that retains its hardness after multiple uses is far more cost-effective than a cheap alternative that requires replacement after a single project.

Summary Recommendation Logic

To make the best choice, follow this logic: Start by identifying your material (Brick/Mortar vs. Concrete/Stone). If it is brick, a standard carbide bit is your best value. If it is concrete, prioritize bits with reinforced carbide tips and deep flutes for dust clearance. Finally, check your drill type. If you have a high-torque impact driver, opt for a hex-shank bit to ensure maximum power transfer and prevent slipping.

Ready to choose?

Jump back to our ranked picks or compare the shortlist side by side.

Frequently Asked Questions

Quick answers about Irwin Masonry Drill Bits before you buy.

Irwin masonry bits feature specialized carbide tips designed to withstand high heat and impact, allowing them to pulverize stone, brick, and concrete rather than just cutting through wood or metal.

While you can use them in a standard drill, you will achieve significantly better results and faster penetration using a hammer drill, which provides the percussive action necessary for masonry work.

Avoid applying excessive pressure. Let the bit do the work. Periodically pulling the bit out during drilling to clear dust from the flutes also helps dissipate heat and prevents jamming.

For harder materials like granite or concrete with rebar, look for Irwin's premium carbide-tipped series. Standard masonry bits may struggle or dull quickly if they encounter steel reinforcement.

If you notice a significant increase in heat, a decrease in drilling speed, or if the bit is sliding across the surface instead of biting in, it is time to replace the bit.

Masonry bits are designed for impact, which can crack delicate tiles. For ceramic or porcelain tile, it is safer to use specialized diamond-tipped hole saws or glass and tile bits.

Always clean the dust out of the flutes after use and store them in a dry place to prevent oxidation. Avoid dropping them on hard surfaces, as this can crack the brittle carbide tips.
Rankings & Insights

Our Irwin Masonry Drill Bits Rankings

21 Products Compared
4.1 Avg PM Score
4 Brands Ranked

Top 10 Irwin Masonry Drill Bits Brands on Amazon

Share of top-ranked products by brand, from our rankings.

  1. 01 Irwin Tools 10 (47.6%)
  2. 02 Irwin 9 (42.9%)
  3. 03 Irwin Industries 1 (4.8%)
  4. 04 Stroton 1 (4.8%)

How We Selected These Products

We compared Irwin Masonry Drill Bits products using product details and customer ratings to identify the best options in the power tools & hand tools..

From that comparison we shortlisted the top 21 Irwin Masonry Drill Bits for this page..

We aim to help you find the right bits products for your needs and save you time when choosing which Irwin Masonry Drill Bits to buy.

Side by Side

Comparison Table

Compare the top 21 picks at a glance — select a column to sort.

# Product Brand PM Score Where to Buy
1 STROTON 6% Cobalt HSS Drill Bit Set STROTON 9.6 Buy on Amazon
2 Irwin Masonry Drill Bit for Cordless Drills Irwin 9.6 Buy on Amazon
3 IRWIN Impact Performance Concrete Screw Drill-Drive Set Irwin Tools 9.4 Buy on Amazon
4 Irwin Tools Slow Spiral Flute Masonry Drill Bit Irwin Tools 6.5 Buy on Amazon
5 Irwin Carbide Tip Masonry Drill Bit Irwin 5.2 Buy on Amazon
6 Irwin SDS-Max to Speedhammer Plus Masonry Adapters Irwin 5.1 Buy on Amazon
7 Irwin Tools Rotary Percussion Masonry Drill Bit Set Irwin Tools 5.1 Buy on Amazon
8 Irwin Masonry Drill Bit Irwin 5.1 Buy on Amazon
9 Irwin SDS-Max Masonry Drill Bit Irwin 5.1 Buy on Amazon
10 Irwin Tools Single Speedhammer Masonry Drill Bit Irwin Tools 5.0 Buy on Amazon
11 Irwin Carbide Tip Masonry Installer Drill Bit Irwin 4.8 Buy on Amazon
12 Irwin Tools Slow Spiral Flute Masonry Drill Bit Irwin Tools 4.5 Buy on Amazon
13 Irwin Slow Spiral Flute Masonry Drill Bit Irwin 4.5 Buy on Amazon
14 Irwin Masonry Drill Bit Irwin 4.1 Buy on Amazon
15 Irwin Carbide Tip Masonry Installer Drill Bit Irwin 3.3 Buy on Amazon
16 Irwin Tools Masonry Hammer Drill Bits Irwin Tools 0.0 Buy on Amazon
17 Irwin Tools Masonry Hammer Drill Bits Irwin Tools 0.0 Buy on Amazon
18 Irwin Tools Straight Shank Masonry Drill Bit Irwin Tools 0.0 Buy on Amazon
19 Irwin Tools Professional Duty Masonry Drill Bit Irwin Tools 0.0 Buy on Amazon
20 Irwin Industries Rotary Masonry Drill Bit Irwin Industries 0.0 Buy on Amazon
21 Irwin Tools Masonry Hammer Drill Bits Irwin Tools 0.0 Buy on Amazon