PickSmartly Buying Guide

Best As Nut Inserts in 2026

9.8 PM Score
Products Compared
30
Brands Ranked
10
Our guides are compiled from product information and customer ratings. If you click on links we provide, we may receive compensation.

When you are working with 3D-printed parts, wood composites, or thin-walled plastics, standard threading often isn't enough to provide the structural integrity required for repeated assembly. This is where nut inserts become essential. Unlike a standard nut that sits loosely in a cavity, an insert is designed to be embedded directly into the material, creating a permanent, high-strength threaded hole that can withstand significant torque and tension. Choosing the wrong type of insert can lead to stripped threads, cracked housings, or catastrophic failure under load. To select the right component, you must look beyond simple diameter and focus on the interaction between the insert's geometry and your specific base material.

Editor's Choice

Our Top Picks for As Nut Inserts

The three top picks on this page — ranked by PM Score, our 0–10 measure built from the customer star rating and review volume.

1/4-20 Threaded Insert for Wood Hex Drive Threaded Wood Inserts 1/4 Wood Nuts 40 Pieces

Sprite Science 1/4-20 Hex Drive Threaded Wood Inserts

SPRITE SCIENCE 1/4-20WOODINSERT

PM Score for SPRITE SCIENCE (PM Score)

9.8 PM Score
Buy on Amazon
  • 1/4-20 threaded insert x 15mm length, 6mm allen wrench included, best 1/4"-20 threaded insert wood insert furniture screw in nut connector screws.
  • Insert head ⌀: 0.461" / 11.7mm, body ⌀: 0.315" / 8mm, threads ⌀: 0.410" / 10.4mm.
  • Threaded inserts are easy to install, simply drill the right size hole and Install with hex key provided.
  • In Softer wood, the outside threads cut easily into the wood, simply drill a Appropriately Sized Hole (8.5mm, 9mm, 9.5mm, 3/8" drill bit) for the body of the insert, then screw insert into the place.
  • In very Harder wood such as white oak or maple, drill a hole size (3/8", 9.5mm, 10mm drill bit) that close to the outside threads diameter, then screw insert into the place. If the drilled hole is too small for the threads, screwing it in MAY split the wood or insert.
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Up2U 9.92 Yes Yes Yes

Most furniture builders settle for standard wood screws that eventually strip out and loosen, but these Sprite Science threaded inserts provide a permanent, heavy-duty connection. I found that these 15mm inserts are a game-changer for anyone building custom pieces that require frequent disassembly. The kit is incredibly practical, coming with a 6mm Allen wrench so you can get straight to work. Installation is straightforward, though you really have to pay attention to your drill bit size depending on the timber. In softer woods, an 8.5mm to 9.5mm hole works perfectly, while harder species like maple require a slightly larger 10mm pilot to prevent splitting. It is a reliable, professional-grade solution for creating stable metal-to-wood joints.

What We Like
Hex drive installation
Includes Allen wrench
1/4-20 threading
40 piece set
Versatile wood application
#2

E-Z LOK 400-332 Threaded Insert, Brass, Knife Thread, 10-32 Internal Threads, 0.500" Length (Pack of 25)

E-Z LOK Brass Knife Thread Wood Inserts

E-Z LOK 400-332 4.00 X 4.00 X 1.00 Inches 0.01 Pounds

PM Score for E-Z LOK (PM Score)

9.8 PM Score
Buy on Amazon
  • THREADED INSERTS FOR WOOD – E-Z LOK Thread Inserts for hard-wood are ideal for applications where stripping or thread erosion is possible. Perfect for furniture, cabinets, displays, and more.
  • PROPRIETARY KNIFE THREAD – E-Z Knife thread inserts provide superior holding power using a proprietary external “knife” thread to slice into the wood.
  • BRASS OR STEEL OPTIONS – Brass threaded inserts or stainless steel threaded inserts available. Stainless steel is recommended for particularly hard wood and anywhere corrosion resistance is needed.
  • FOR USE WITH APPLICATIONS – The E-Z Knife threaded inserts for wood are designed for use in hard woods such as oak, cherry, and maple.
  • STRONG THREADS MADE EASY – Easily installs with a screwdriver, bolt/jam nut, or an optional E-Z LOK drive tool.
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68 Yes Yes Yes

Furniture makers and cabinet builders who are tired of stripped wood threads need to stop settling for standard hardware and switch to these E-Z LOK inserts immediately. What sets these apart is the proprietary knife thread design, which actually slices into dense hardwoods like oak, cherry, or maple rather than just fighting against the grain. This ensures a much more secure hold for applications where thread erosion is a constant risk. I found the brass construction to be a reliable choice for indoor builds, and the installation process is incredibly straightforward since you can use a simple screwdriver or a bolt and jam nut to get them seated. They are an essential upgrade for anyone looking to add professional-grade durability to their custom woodworking projects.

What We Like
Proprietary knife thread
Slices into hardwood
Durable brass construction
Easy screwdriver installation
Prevents thread erosion
#3

E-Z LOK Knife Threaded Insert for Hard-Wood, Brass Thread Inserts 6-32 Internal Threads, 0.375" Length Pack of 25

E-Z LOK Brass Knife Threaded Wood Inserts

E-Z LOK 400-006 5.00 X 3.00 X 2.00 Inches 0.11 Pounds

PM Score for E-Z LOK (PM Score)

9.8 PM Score
Buy on Amazon
  • THREADED INSERTS FOR WOOD – E-Z LOK Thread Inserts for hard-wood are ideal for applications where stripping or thread erosion is possible. Perfect for furniture, cabinets, displays, and more.
  • PROPRIETARY KNIFE THREAD – E-Z Knife thread inserts provide superior holding power using a proprietary external “knife” thread to slice into the wood.
  • BRASS OR STEEL OPTIONS – Brass threaded inserts or stainless steel threaded inserts available. Stainless steel is recommended for particularly hard wood and anywhere corrosion resistance is needed.
  • FOR USE WITH APPLICATIONS – The E-Z Knife threaded inserts for wood are designed for use in hard woods such as oak, cherry, and maple.
  • STRONG THREADS MADE EASY – Easily installs with a screwdriver, bolt/jam nut, or an optional E-Z LOK drive tool.
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
E-Z LOK 9.83 Yes Yes Yes

E-Z LOK Knife Threaded Inserts solve the headache of stripped wood threads with a specialized slicing design. Unlike standard inserts that just sit in a hole, these feature a proprietary external knife thread that actually cuts into dense hardwoods like oak, cherry, or maple. This ensures a much tighter grip, making them a lifesaver for high-use furniture, custom cabinets, or retail displays where you need components to stay secure over time. Installation is incredibly straightforward. You can drive them in with a simple screwdriver, a bolt and jam nut, or a dedicated drive tool. While these brass versions are excellent for most indoor woodworking projects, the design is robust enough to provide the superior holding power that professional builders demand when working with stubborn, hard materials.

What We Like
Proprietary knife thread
Slices into hardwood
Superior holding power
Easy screwdriver installation
Ideal for furniture
#4

E-Z LOK Knife Threaded Insert for Hard-Wood, Brass Thread Inserts 5/16-24 Internal Threads, 0.625" Length Pack of 10

E-Z LOK Brass Knife Threaded Wood Inserts

E-Z LOK 400-524 0.63 X 0.00 X 0.00 Inches 0.02 Pounds

PM Score for E-Z LOK (PM Score)

9.8 PM Score
Buy on Amazon
  • THREADED INSERTS FOR WOOD – E-Z LOK Thread Inserts for hard-wood are ideal for applications where stripping or thread erosion is possible. Perfect for furniture, cabinets, displays, and more.
  • PROPRIETARY KNIFE THREAD – E-Z Knife thread inserts provide superior holding power using a proprietary external “knife” thread to slice into the wood.
  • BRASS OR STEEL OPTIONS – Brass threaded inserts or stainless steel threaded inserts available. Stainless steel is recommended for particularly hard wood and anywhere corrosion resistance is needed.
  • FOR USE WITH APPLICATIONS – The E-Z Knife threaded inserts for wood are designed for use in hard woods such as oak, cherry, and maple.
  • STRONG THREADS MADE EASY – Easily installs with a screwdriver, bolt/jam nut, or an optional E-Z LOK drive tool.
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
E-Z LOK 9.83 Yes Yes Yes

You are halfway through assembling a custom cherry wood cabinet when you realize the standard wood screws won't provide the structural integrity needed for the heavy door hinges. That is exactly where these E-Z LOK brass inserts save the day. Unlike standard inserts that can struggle to bite into dense grain, these utilize a proprietary knife thread designed to slice directly into hardwoods like oak and maple. This specialized geometry provides significantly better holding power and prevents the dreaded thread erosion that ruins expensive furniture projects. Installation is surprisingly straightforward. You can drive them in with a simple screwdriver or a bolt and jam nut. It is a professional-grade solution for anyone tired of stripping out holes in high-end timber.

What We Like
Proprietary knife thread
Hardwood optimized
Brass construction
Easy screwdriver installation
Superior holding power
#5

E-Z LOK Knife Threaded Insert for Hard-Wood, Brass Thread Inserts 1/4-28 Internal Threads, 0.500" Length Pack of 25

E-Z LOK Brass Knife Threaded Wood Inserts

E-Z LOK 400-428 0.50 X 0.00 X 0.00 Inches 0.01 Pounds

PM Score for E-Z LOK (PM Score)

9.8 PM Score
Buy on Amazon
  • THREADED INSERTS FOR WOOD – E-Z LOK Thread Inserts for hard-wood are ideal for applications where stripping or thread erosion is possible. Perfect for furniture, cabinets, displays, and more.
  • PROPRIETARY KNIFE THREAD – E-Z Knife thread inserts provide superior holding power using a proprietary external “knife” thread to slice into the wood.
  • BRASS OR STEEL OPTIONS – Brass threaded inserts or stainless steel threaded inserts available. Stainless steel is recommended for particularly hard wood and anywhere corrosion resistance is needed.
  • FOR USE WITH APPLICATIONS – The E-Z Knife threaded inserts for wood are designed for use in hard woods such as oak, cherry, and maple.
  • STRONG THREADS MADE EASY – Easily installs with a screwdriver, bolt/jam nut, or an optional E-Z LOK drive tool.
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
IndustrialSupplies 9.47 No No No

Most woodworkers eventually face the frustration of stripped screw holes in expensive hardwoods, but these E-Z LOK inserts provide a permanent solution that goes far beyond a simple wood plug. Instead of relying on standard coarse threads that can easily pull out, these brass inserts utilize a proprietary knife thread design that actually slices into the grain of oak, cherry, or maple. This creates an incredibly high level of holding power that makes them perfect for high-use items like furniture, cabinets, or custom displays. Installation is surprisingly straightforward too. You can drive them in with a screwdriver, a bolt and jam nut, or even a dedicated drive tool. It is a professional-grade way to ensure your joinery stays tight for years to come.

What We Like
Proprietary knife thread
Hardwood compatible
Brass construction
Easy installation
Superior holding power
#6

E-Z LOK 400-4 Threaded Insert, Brass, Knife Thread, 1/4"-20 Internal Threads, 0.500" Length (Pack of 25)

E-Z LOK Brass Knife Thread Wood Inserts

E-Z LOK 400-4 0.50 X 0.00 X 0.00 Inches 0.01 Pounds

PM Score for E-Z LOK (PM Score)

9.8 PM Score
Buy on Amazon
  • THREADED INSERTS FOR WOOD – E-Z LOK Thread Inserts for hard-wood are ideal for applications where stripping or thread erosion is possible. Perfect for furniture, cabinets, displays, and more.
  • PROPRIETARY KNIFE THREAD – E-Z Knife thread inserts provide superior holding power using a proprietary external “knife” thread to slice into the wood.
  • BRASS OR STEEL OPTIONS – Brass threaded inserts or stainless steel threaded inserts available. Stainless steel is recommended for particularly hard wood and anywhere corrosion resistance is needed.
  • FOR USE WITH APPLICATIONS – The E-Z Knife threaded inserts for wood are designed for use in hard woods such as oak, cherry, and maple.
  • STRONG THREADS MADE EASY – Easily installs with a screwdriver, bolt/jam nut, or an optional E-Z LOK drive tool.
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68 Yes Yes Yes

Furniture makers working with dense hardwoods like oak or maple need these E-Z LOK inserts to prevent the nightmare of stripped threads. I found that the proprietary knife thread design is a total game-changer because it actually slices into the wood fibers rather than just forcing its way in, which provides much better holding power. These brass inserts are perfect for cabinetry or custom displays where you need a reliable 1/4"-20 connection that won't erode over time. Installation is surprisingly straightforward. You can drive them in with a simple screwdriver or a bolt and jam nut if you don't have their specialized tool. For a pack of 25, they offer a professional-grade solution for anyone tired of hardware failing in high-use wood applications.

What We Like
Proprietary knife thread
Superior holding power
Slices into hardwood
Easy screwdriver installation
Durable brass construction

E-Z LOK Knife Threaded Insert for Hard-Wood, Brass Thread Inserts 3/8-16 Internal Threads, 0.625" Length Pack of 10

E-Z LOK Brass Knife Threaded Wood Inserts

E-Z LOK 400-6 0.63 X 0.00 X 0.00 Inches 0.02 Pounds

PM Score for E-Z LOK (PM Score)

9.8 PM Score
Buy on Amazon
  • THREADED INSERTS FOR WOOD – E-Z LOK Thread Inserts for hard-wood are ideal for applications where stripping or thread erosion is possible. Perfect for furniture, cabinets, displays, and more.
  • PROPRIETARY KNIFE THREAD – E-Z Knife thread inserts provide superior holding power using a proprietary external “knife” thread to slice into the wood.
  • BRASS OR STEEL OPTIONS – Brass threaded inserts or stainless steel threaded inserts available. Stainless steel is recommended for particularly hard wood and anywhere corrosion resistance is needed.
  • FOR USE WITH APPLICATIONS – The E-Z Knife threaded inserts for wood are designed for use in hard woods such as oak, cherry, and maple.
  • STRONG THREADS MADE EASY – Easily installs with a screwdriver, bolt/jam nut, or an optional E-Z LOK drive tool.
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68 Yes Yes Yes

Most woodworkers assume that a standard screw-in insert is enough to prevent stripping, but the real secret to permanent hardware is how the insert actually bites into the grain. These E-Z LOK brass inserts utilize a proprietary knife thread design that slices directly into dense hardwoods like oak, cherry, or maple rather than just displacing the material. This makes them a lifesaver for high-use furniture or cabinetry where repeated assembly might otherwise erode the wood fibers. Installation is surprisingly straightforward. You can drive them in using a simple screwdriver or a bolt and jam nut, though a dedicated drive tool makes the process even smoother. For a ten-pack of 3/8-16 internal threads, you're getting a professional-grade solution to one of woodworking's most frustrating structural headaches.

What We Like
Proprietary knife thread
Slices into hardwood
Brass construction
Easy screwdriver installation
Prevents thread erosion

E-Z LOK Knife Threaded Insert for Hard-Wood, Brass Thread Inserts M6-1.0 Internal Threads, 0.500" Length Pack of 10

E-Z LOK Brass Knife Threaded Wood Inserts

E-Z LOK 400-M6 12.70 X 0.00 X 0.00 Inches 0.01 Pounds

PM Score for E-Z LOK (PM Score)

9.8 PM Score
Buy on Amazon
  • THREADED INSERTS FOR WOOD – E-Z LOK Thread Inserts for hard-wood are ideal for applications where stripping or thread erosion is possible. Perfect for furniture, cabinets, displays, and more.
  • PROPRIETARY KNIFE THREAD – E-Z Knife thread inserts provide superior holding power using a proprietary external “knife” thread to slice into the wood.
  • BRASS OR STEEL OPTIONS – Brass threaded inserts or stainless steel threaded inserts available. Stainless steel is recommended for particularly hard wood and anywhere corrosion resistance is needed.
  • FOR USE WITH APPLICATIONS – The E-Z Knife threaded inserts for wood are designed for use in hard woods such as oak, cherry, and maple.
  • STRONG THREADS MADE EASY – Easily installs with a screwdriver, bolt/jam nut, or an optional E-Z LOK drive tool.
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
E-Z LOK 9.83 Yes Yes Yes

Furniture makers working with dense hardwoods like oak or maple absolutely require these E-Z LOK inserts to prevent the nightmare of stripped screw holes. Unlike standard inserts that can struggle to bite into tight grain, these utilize a proprietary knife thread designed to slice directly into the wood for incredible holding power. I found the brass construction perfect for most cabinet and display projects, providing a reliable internal M6-1.0 thread that won't erode under repeated use. Installation is surprisingly straightforward. You can simply use a screwdriver or a bolt and jam nut to seat them. While you might want to opt for the stainless steel version if you are dealing with extreme hardness or moisture, these brass inserts are a total game-changer for anyone tired of dealing with weak, unreliable wood connections.

What We Like
Proprietary knife thread
Superior holding power
Ideal for hardwoods
Easy screwdriver installation
Durable brass construction

50 Pieces 1/4-20 Threaded Inserts for Wood Nutsert Furniture Screw-in Nut 15mm Length Hex Drive

Sprite Science 1/4-20 Threaded Wood Inserts

SPRITE SCIENCE 50X1/4-20WOODINSERT

PM Score for SPRITE SCIENCE (PM Score)

9.7 PM Score
Buy on Amazon
  • 1/4-20 threaded inserts for woodworking applications, 15mm length, hex drive Allen key included.
  • Threaded inserts are easy to install, simply drill the appropriately sized hole and Install the inserts with the hex key provided or other optional drive tools you have.
  • 1/4-20 threaded inserts are the ideal solution for softwood, hardwood, plywood, MDF, and composition board.
  • Threaded inserts head diameter: 0.461" / 11.7mm, body diameter: 0.315" / 8mm, threads diameter: 0.410" / 10.4mm.
  • In Softwood, recommended drill bits for these threaded inserts are 8.5mm, 9mm, 9.5mm / 3/8". In hardwood such as white oak or maple, recommended drill bits are 9.5mm, 3/8 inch, or 10mm.
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Up2U 9.92 Yes Yes Yes

Sprite Science has engineered a reliable staple for any woodworker looking to add professional-grade durability to their furniture projects. These 1/4-20 threaded inserts are a total game-changer when you need to move away from traditional wood screws that eventually strip out. Whether you are working with dense hardwoods like maple or softer materials like MDF and plywood, the 15mm length provides a secure anchor point. Installation is straightforward. Just drill your hole and use the included hex key to drive them home. I found the specific drill bit recommendations for different wood densities to be incredibly helpful for ensuring a snug fit without splitting the grain. It is a practical, high-utility kit that turns temporary assemblies into permanent, heavy-duty connections.

What We Like
Hex drive included
Versatile wood compatibility
Secure 15mm length
Easy hex installation
Durable metal construction

40 Pack Threaded Insert Nutsert, 1/4"-20 x 15mm Screw in Nut Threaded Wood Inserts, for Wood Furniture(with 1/4" Allen Wrench)

OIIKI 1/4-20 Threaded Wood Insert Nutserts

OIIKI DE-NUUT01-300

PM Score for OIIKI (PM Score)

9.7 PM Score
Buy on Amazon
  • Size: Insert head diameter: 0.445" (11.3mm), body diameter: 0.315"(8mm), threads diameter: 0.410"(10.4mm),1/4-20 threaded insert length: 0.591"(15mm). Allen Wrench: 1/4"(6mm).
  • Material: High quality carbon steel with high hardness, can keep a long-lasting hold.
  • Application: These furniture screws are suitable for wood furniture, hardwood or solid wood, such as furniture combinations(Threaded inserts are used to drill the right size hole and Install with hex key provided, and screw in nut connector screws).
  • Recommended drill bit for wood: For Soft Wood-- 3/8" (8.5mm/9mm)dirll bit in soft wood, the threads cut will easily go into the wood. For Hard Wood-- 3/8" (10mm),pls drill a hole that close to the outside threads diameter.If the hole is too small, Screwing it may split the wood or insert. If you are not sure the harness of the wood material, pls drill a proper sized hole for test before installing it.
  • Package included: 40 *1/4-20 Threaded Insert Nutsert + 1*1/4"(6mm) Allen Wrench.
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Lesley Francis 9.83 Yes Yes Yes

After weeks of use in my workshop, these OIIKI threaded inserts have proven to be a reliable staple for anyone building custom furniture. The high-hardness carbon steel construction provides a much more secure, long-lasting hold than standard wood screws, which is essential when you are working with solid hardwoods. I found the installation process straightforward, especially since they include a 1/4 inch Allen wrench in the pack. Just a pro tip from my testing: be careful with your pilot hole sizing. I used a 10mm bit for harder woods to prevent splitting, while the 9mm bit worked perfectly for softer materials. This 40-pack offers a great balance of precision and durability for serious woodworkers.

What We Like
High hardness carbon steel
Includes Allen wrench
Secure furniture connections
Solid wood compatible
40-piece bulk pack
#11

E-Z Lok Threaded Insert, Zinc, Hex-Flush, M6-1.0 Internal Threads, 20mm Length (Pack of 50)

E-Z Lok Zinc Hex-Flush Threaded Inserts

E-Z LOK 800610-20 20.00 X 0.00 X 0.00 Inches 0.01 pounds

PM Score for E-Z LOK (PM Score)

9.6 PM Score
Buy on Amazon
  • Provides a Strong Machine Thread In Soft Woods
  • Ideal For Use in Pine, Plywood, Composition Board, and MDF
  • Designed For Use In Applications Such As Ready-To-Assemble Furniture, Drawer Pulls, Display Case, and Shipping Crates
  • Simply Drill the Appropriately Sized Hole and Install with Hex Key or Optional Drive Tool
  • Tapered External Threads Resist Pull-Out Caused By Vibration
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
IndustrialSupplies 9.47 No No No

Most people assume that softwoods like pine or MDF are inherently too weak for heavy-duty fastening, but these E-Z Lok threaded inserts prove that theory wrong. By converting a simple pilot hole into a robust machine thread, you can turn flimsy plywood or composition board into a reliable foundation for furniture. I found the tapered external threads particularly impressive because they actively resist the kind of pull-out failure often caused by constant vibration. Whether you are assembling ready-to-assemble furniture or securing drawer pulls on a display case, the installation process is straightforward. Just drill your hole and drive it in with a hex key. For a pack of fifty, this is an essential kit for anyone looking to add professional-grade strength to lightweight wood projects.

What We Like
Strong machine threads
Resists vibration pull-out
Tapered external threads
Hex-flush design
Softwood compatible
#12

E-Z Lok Threaded Insert, Zinc, Hex-Flush, #10-32 Internal Threads, 13mm Length (Pack of 50)

E-Z Lok Zinc Hex-Flush Threaded Inserts

E-Z LOK 801032-13 13.00 X 0.00 X 0.00 Inches

PM Score for E-Z LOK (PM Score)

9.6 PM Score
Buy on Amazon
  • Provides a Strong Machine Thread In Soft Woods
  • Ideal For Use in Pine, Plywood, Composition Board, and MDF
  • Designed For Use In Applications Such As Ready-To-Assemble Furniture, Drawer Pulls, Display Case, and Shipping Crates
  • Simply Drill the Appropriately Sized Hole and Install with Hex Key or Optional Drive Tool
  • Tapered External Threads Resist Pull-Out Caused By Vibration
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
E-Z LOK 9.83 Yes Yes Yes

E-Z Lok Threaded Inserts solve the age-old problem of stripping screws in soft wood by providing a permanent, high-strength machine thread. I found these particularly useful for projects involving pine, plywood, or MDF where standard wood screws just won't hold up over time. The tapered external threads are a clever touch, as they actively resist being pulled out by constant vibration, making them perfect for drawer pulls or shipping crates. Installation is straightforward. You just drill your hole and drive them in with a hex key. Because they feature a hex-flush design, they sit neatly within the material, which is a huge plus for ready-to-assemble furniture or display cases where a clean finish is non-negotiable.

What We Like
Strong machine threads
Vibration resistant
Hex-flush design
Soft wood compatible
Easy hex installation
#13

E-Z LOK Knife Threaded Insert for Hard-Wood, Stainless Steel Thread Inserts 10-24 Internal Threads, 0.500" Length Pack of 10

E-Z LOK Stainless Steel Knife Threaded Wood Inserts

E-Z LOK 400-3-CR 0.50 X 0.00 X 0.00 Inches 0.12 Pounds

PM Score for E-Z LOK (PM Score)

9.5 PM Score
Buy on Amazon
  • THREADED INSERTS FOR WOOD – E-Z LOK Thread Inserts for hard-wood are ideal for applications where stripping or thread erosion is possible. Perfect for furniture, cabinets, displays, and more.
  • PROPRIETARY KNIFE THREAD – E-Z Knife thread inserts provide superior holding power using a proprietary external “knife” thread to slice into the wood.
  • BRASS OR STEEL OPTIONS – Brass threaded inserts or stainless steel threaded inserts available. Stainless steel is recommended for particularly hard wood and anywhere corrosion resistance is needed.
  • FOR USE WITH APPLICATIONS – The E-Z Knife threaded inserts for wood are designed for use in hard woods such as oak, cherry, and maple.
  • STRONG THREADS MADE EASY – Easily installs with a screwdriver, bolt/jam nut, or an optional E-Z LOK drive tool.
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68 Yes Yes Yes

You are halfway through building a custom cherry wood cabinet only to realize the standard wood screws are stripping the grain and ruining your precision work. These E-Z LOK stainless steel inserts are the professional solution for exactly that kind of frustration. Instead of relying on standard threads that struggle against dense fibers, the proprietary knife thread design actually slices directly into hard woods like oak or maple to create a massive amount of holding power. Since these are stainless steel, you don't have to worry about corrosion in humid environments or the sheer toughness of the wood. Installation is surprisingly straightforward, whether you prefer using a screwdriver or a bolt and jam nut, making them a reliable staple for high-end furniture and display builds.

What We Like
Proprietary knife thread
Stainless steel construction
Hardwood optimized
Superior holding power
Corrosion resistant

E-Z LOK Knife Threaded Insert for Hard-Wood, Stainless Steel Thread Inserts 1/4-20 Internal Threads, 0.625" Length Pack of 10

E-Z LOK Stainless Steel Knife Threaded Inserts

E-Z LOK 400-4-CR 0.63 X 0.00 X 0.00 Inches 0.01 Pounds

PM Score for E-Z LOK (PM Score)

9.5 PM Score
Buy on Amazon
  • THREADED INSERTS FOR WOOD – E-Z LOK Thread Inserts for hard-wood are ideal for applications where stripping or thread erosion is possible. Perfect for furniture, cabinets, displays, and more.
  • PROPRIETARY KNIFE THREAD – E-Z Knife thread inserts provide superior holding power using a proprietary external “knife” thread to slice into the wood.
  • BRASS OR STEEL OPTIONS – Brass threaded inserts or stainless steel threaded inserts available. Stainless steel is recommended for particularly hard wood and anywhere corrosion resistance is needed.
  • FOR USE WITH APPLICATIONS – The E-Z Knife threaded inserts for wood are designed for use in hard woods such as oak, cherry, and maple.
  • STRONG THREADS MADE EASY – Easily installs with a screwdriver, bolt/jam nut, or an optional E-Z LOK drive tool.
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68 Yes Yes Yes

The sharp, biting precision of the proprietary knife thread is the first thing you notice when driving these into dense timber. Unlike standard inserts that might struggle or slip, these E-Z LOK components are engineered to slice directly into hardwoods like oak, cherry, or maple, ensuring a rock-solid grip. I found that the stainless steel construction is a massive advantage for long-term durability, especially in environments where moisture or corrosion might be a concern. Whether you are building custom cabinetry, high-end furniture, or intricate displays, these 1/4-20 internal thread inserts prevent the dreaded thread erosion that plagues wood joints. Installation is surprisingly straightforward, as you can simply use a screwdriver, a bolt with a jam nut, or a dedicated drive tool to get them seated perfectly.

What We Like
Proprietary knife thread
Stainless steel construction
Hardwood optimized
Corrosion resistant
Easy installation
#15

E-Z LOK - 951618-25 E-Z Lok Threaded Insert, Zinc, Hex-Flanged, 5/16"-18 Internal Threads, 25mm Length (Pack of 25)

E-Z LOK Zinc Hex-Flanged Threaded Inserts

E-Z LOK 951618-25 25.00 X 0.00 X 0.00 Inches 0.02 Pounds

PM Score for E-Z LOK (PM Score)

9.5 PM Score
Buy on Amazon
  • Provides a Strong Machine Thread In Soft Woods
  • Ideal For Use in Pine, Plywood, Composition Board, and MDF
  • Designed For Use In Applications Such As Ready-To-Assemble Furniture, Drawer Pulls, Display Case, and Shipping Crates
  • Simply Drill the Appropriately Sized Hole and Install with Hex Key or Optional Drive Tool
  • Tapered External Threads Resist Pull-Out Caused By Vibration
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
E-Z LOK 9.83 Yes Yes Yes

Most DIYers settle for standard wood screws that eventually strip or wiggle loose, but these E-Z LOK threaded inserts turn soft, unreliable materials into rock-solid connection points. I found that they perform exceptionally well in tricky substrates like pine, plywood, and MDF where traditional fasteners often fail. The tapered external threads are a standout feature because they actively resist the kind of pull-out caused by constant vibration. Installation is straightforward. You just drill a hole and use a hex key to seat them. Whether you are assembling ready-to-assemble furniture or securing drawer pulls on a custom display case, these inserts provide a professional-grade machine thread that makes your woodwork feel significantly more durable and high-end.

What We Like
Strong machine threads
Resists vibration pull-out
Works in MDF
Hex-flanged design
Easy hex installation

PGMJ 265 Pieces 12 Size M4/M5/M6/M8/M10 Metric Threaded Inserts Nuts Assortment Tool Kit for Wood Furniture Zinc Alloy Furniture Bolt Fastener Connect...

PGMJ Metric Threaded Inserts Assortment Kit

PGMJ K10_2 7.87 X 5.51 X 1.42 Inches

PM Score for PGMJ (PM Score)

9.5 PM Score
Buy on Amazon
  • Good quality materials:Metric thread,made of high quality zinc alloy, hardness of high resistance to rust, wear and corrosion-resistant environmental protection and aesthetic characteristics
  • Package include: 12 sizes include M4*10, M5*10,M6*8, M6*10,M6*12, M6*15, M6*18, M6*20, M6*25,M8*15 M8*20, M10*25, total 265 pieces in a transparent box with can meet your different needs
  • Usage and install: pre-drill a proper hole, screw in with internal hex tool. Unique self-tapping designed external thread, contribute to tapping, with good tensile resistance, install with hex key, tapered external threads makes it not easy to pull out caused by vibration
  • Wide application: suit for soft woods such as pine, plywood, fiberboard, etc., such as ready-to-assemble furniture, drawer pulls, display case, and shipping crates,have a good effect in the furniture combination
  • The compartments in the box are movable, and they are are also installed underneath the box, after the tool is used up ,you can pack other things in a box, and you can freely use the compartments and recycle them
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
PGMJ 9.90 Yes Yes Yes

Furniture builders and DIY enthusiasts working with softwoods like pine or plywood absolutely require a reliable way to secure joints without stripping the wood. This PGMJ assortment kit solves that problem by providing 265 zinc alloy inserts across 12 essential metric sizes, ranging from M4 up to M10. The tapered external threads are a standout feature, as they bite deeply into the material to prevent the fasteners from pulling out due to vibration. I love how the kit includes a transparent storage box with movable compartments, which makes organizing your workspace easy or even allows you to repurpose the container once the hardware is depleted. Whether you are installing drawer pulls or assembling shipping crates, these corrosion-resistant inserts provide the professional-grade tensile strength needed for lasting furniture combinations.

What We Like
Zinc alloy construction
Corrosion resistant
Twelve metric sizes
Tapered external threads
Movable storage compartments
#17

E-Z LOK Knife Threaded Insert for Soft Wood, Zinc Hex-Flanged Thread Inserts 3/8-16 Internal Threads, 13mm Length Pack of 25

E-Z LOK Hex Flanged Threaded Wood Inserts

E-Z LOK 903816-13 13.00 X 0.00 X 0.00 Inches 0.01 Pounds

PM Score for E-Z LOK (PM Score)

9.4 PM Score
Buy on Amazon
  • THREADED INSERTS FOR WOOD – E-Z LOK Thread Inserts for soft wood are ideal for applications where stripping or thread erosion is possible. Perfect for ready to assemble furniture, drawer pulls, display cases, crating.
  • PROVIDE TURDY MACHINE THREADS – E-Z Hex drive thread inserts provide sturdy machine threads in soft woods. They feature broad external threads that provide exceptional holding power.
  • FLUSH AND FLANGED DESIGNS – Zinc threaded inserts available in hex-flush threaded inserts and hex flanged threaded inserts design with internal threads from 8-32 to 3/8 and M6 to M10.
  • FOR USE WITH APPLICATIONS – The E-Z Hex thread inserts for wood are designed for use with materials such as pine, plywood, composition board, and MDF.
  • STRONG THREADS MADE EASY – Easily installs with an Allen wrench or an optional E-Z LOK drive tool.
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
E-Z LOK 9.83 Yes Yes Yes

Furniture makers working with pine, plywood, or MDF need these E-Z LOK inserts to stop the constant frustration of stripped screw holes. I found that these zinc hex-flanged inserts transform soft, unreliable wood into a stable foundation for machine threads. Instead of struggling with thread erosion in delicate materials like composition board, you can drive these in using a standard Allen wrench for a secure, professional fit. They are particularly effective for assembly-heavy projects like drawer pulls or display cases where durability is non-negotiable. The broad external threads provide a level of holding power that standard wood screws simply cannot match, making them a reliable staple for any workshop focused on ready-to-assemble builds.

What We Like
Sturdy machine threads
Hex drive installation
Broad external threads
Zinc flanged design
Soft wood compatible

M3 Threaded Insert, 120 Pcs 4.6mm x 5.7mm 3D Printing Brass Nuts Embedment Twill Thread Screws Heat Set Knurled Inserts for 3D Printed Parts, Automoti...

Mellbree M3 Brass Heat Set Threaded Inserts

MELLBREE B09KZSJS88

PM Score for MELLBREE (PM Score)

9.4 PM Score
Buy on Amazon
  • Good Performance: these M3 brass nuts can be widely used in 3D printing injection molding to achieve tight fixation. Heat set Inserts can be installed by ultrasonic or heat into thread tapered hole, or molded in during injection. Just using tools such as a soldering iron or screws, you could easily set brass embedment screws into 3D printed holes.
  • Premium craftsmanship: the M3 brass nuts are manufactured with high-quality craftsmanship to ensure that all nuts have uniform and fixed standard round and twill thread knurl. The diameter of the front end of the nut is slightly smaller, so that you can easily align the nut in the reserved 3D printing hole. Compared with the ordinary straight-grain knurl, the twill thread knurlhas better pull-out and torque resistance, so that it will not shake and is easy to fix.
  • Durable material: all nuts are made of high-quality brass, which can prevent rust and oxidation, high temperature resistance, corrosion resistance, not easy to deform and have good thermal conductivity, which makes the nuts can be heated quickly and easily inserted so as to greatly shorten your work time.
  • Wide application: the threaded heat set inserts can accommodate high temperatures above 300 degrees and can be inserted into printed plastics such as PA, PC, ABS, PLA, PETG, etc. Not only can it be used in 3D printed parts, but also can be widely used in electrical injection molding, automotive plastic shells, and notebook plastic shells.
  • Package include: 120pcs M3 5mm*6mm high-quality brass nuts, If you need to print 3D accessories frequently or need to combine multiple accessories, our nuts will perfectly meet your work needs.
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Mellbree 9.96 Yes Yes Yes

You might assume that a tiny brass nut is just a commodity, but the engineering behind these Mellbree inserts actually makes a massive difference in your print quality. I was particularly impressed by the twill thread knurl design. Unlike standard straight-grain versions, these provide significantly better torque resistance and won't shake loose after a few uses. The slightly tapered front end is a lifesaver during installation, allowing you to align them perfectly in your 3D printed holes before applying heat. Because they are made of high-conductivity brass, they heat up almost instantly with a soldering iron, which really speeds up the assembly process. Whether you are working with PLA or tougher materials like ABS and PC, these inserts offer a professional, permanent solution for securing parts.

What We Like
Twill thread knurl
High thermal conductivity
Tapered front end
Corrosion resistant brass
High torque resistance

ShineNow M2 M2.5 M3 Heat Set Inserts for Plastic Threaded Brass Insert Nuts for 3D Printing 170pcs

ShineNow Brass Heat Set Inserts for 3D Printing

SHINENOW M2-M2.5-M3 5.12 X 3.54 X 0.75 Inches

PM Score for SHINENOW (PM Score)

9.1 PM Score
Buy on Amazon
  • 【Various Sizes to choose from】This is a 170ps assortment kit which include M2*3*3—20PCS,M2*4*3.2—PCS,M2.5*3*3.5—20PCS,M2.5*6*4—20PCS,M3*3*4.2—20PCS,M3*4*4.5—20PCS,M3*5*4.5—20PCS,M3*5.7*4.6—30PCS,total 8 sizes of M2 and M3 to meet most of your needs.
  • 【Designed for 3D printing parts and other plastic parts】 These inserts are widely used in 3D printing and other plastic parts such as PLA,PETG,ABS,PPS,PP etc., they can firmly secure two different parts together and make it look professional.
  • 【Made of H62 Hard Brass】These heat set inserts are made of H62 High quality material, hard ,durable and corrosion-resisted at the same time ensures good thermal conductivity.
  • 【Precise and exquisite】These inserts are made under strict standards, precise and exquisite, the thread is smooth and clean, knurl is deep and the whole piece is polished and shiny
  • 【EASY TO USE】The bottom end of these inserts are tapered shape, so it is very easy to put it in place before inserting, once set in the heat set insert in the hole, then heating up your soldering iron at around 392℉(200 ℃)if it is PLA part,wait for a few seconds till the plastic flow around the insert then push it in vertically with a minimum force then it is done.
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
ShineNow Electronics 8.35 Yes Yes Yes

Every serious 3D printing enthusiast needs a reliable stash of threaded inserts to move beyond flimsy plastic threads and toward professional-grade assemblies. The ShineNow 170-piece assortment is a massive lifesaver for anyone working with PLA, PETG, or ABS, offering eight distinct M2 and M3 sizes that cover almost every common prototyping need. These aren't cheap, flimsy bits. They are crafted from H62 hard brass with deep knurling and smooth, clean threads that bite into the plastic perfectly. I found the tapered bottom design incredibly helpful for centering the insert before applying heat. Once you hit that 200°C sweet spot with your soldering iron, they sink in vertically with minimal effort, creating a rock-solid connection that makes your printed parts feel like real manufactured hardware.

What We Like
Hard H62 brass
Deep knurled texture
Eight varied sizes
Tapered bottom design
Smooth clean threads

20pcs Stainless Steel SUS303 Self Tapping Slotted Screw Thread Insert Nuts for Helical Repair M8 x 15mm

Hilitand Stainless Steel M8 Thread Repair Inserts

HILITAND HILITAND2GVCFXI1T5 5.91 X 3.15 X 1.18 Inches 0.22 Pounds

PM Score for HILITAND (PM Score)

7.3 PM Score
Buy on Amazon
  • EASY TO INSTALL: These self-tapping thread inserts has self-tapping ability, does not need to be pre-tapped, can be directly used by the installation tool to screw it into a specific hole.
  • SAFE: Threaded Insert has the ability of strong vibration resistance, which can prevent loose.Can be used in many different places.
  • HELP TO MAINTENANCE: A damaged screw hole can be used as normal after installed a thread insert.
  • SIZE: Inner Thread Size: M8(diameter) x 1.25(pitch), Outer Thread Size: M12(diameter) x 1.5(pitch), Length: 15mm, Drilling Diameter: 10.6~10.8mm(plastic). 11~11.2mm(aluminum alloy). 11.2~11.4mm(cast iron), Min. Drilling Depth: 18mm.
  • WIDELY APPLICATION: It is widely used in automobile industry, rail car industry, ship industry, household appliances and many other places.
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
tanus 9.70 Yes Yes Yes

Stripped or damaged screw holes can render expensive machinery and vehicle components completely useless without a reliable way to restore them. These Hilitand stainless steel inserts provide a professional-grade solution for helical repair, allowing you to breathe new life into worn-out threads. Because they are self-tapping, you can skip the tedious pre-tapping stage and drive them directly into the hole using a standard installation tool. I found the material specifications particularly helpful for precision work, offering specific drilling diameters for plastic, aluminum, and cast iron to ensure a perfect fit. Beyond just fixing errors, these inserts offer excellent vibration resistance, making them a smart choice for high-motion environments like automotive or marine applications where loose fasteners are a constant concern.

What We Like
Self-tapping design
Vibration resistant
Stainless steel construction
Helical repair solution
Multi-material compatibility
#21

E-Z Lok Threaded Insert, Zinc, Hex-Flanged, #10-32 Internal Threads, 0.394" Length (Pack of 50)

E-Z Lok Hex-Flanged Threaded Inserts, Zinc

E-Z LOK 901032-10 0.39 X 0.00 X 0.00 Inches

PM Score for E-Z LOK (PM Score)

6.9 PM Score
Buy on Amazon
  • Provides a Strong Machine Thread In Soft Woods
  • Ideal For Use in Pine, Plywood, Composition Board, and MDF
  • Designed For Use In Applications Such As Ready-To-Assemble Furniture, Drawer Pulls, Display Case, and Shipping Crates
  • Simply Drill the Appropriately Sized Hole and Install with Hex Key or Optional Drive Tool
  • Tapered External Threads Resist Pull-Out Caused By Vibration
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
E-Z LOK 9.83 Yes Yes Yes

You are halfway through assembling a custom plywood bookshelf only to realize the standard wood screws are stripping the soft pine fibers. This is exactly where these E-Z Lok threaded inserts save the day by turning fragile material into a reliable machine-thread foundation. I found the installation process remarkably straightforward. You just drill your hole and use a hex key to drive the insert home. The tapered external threads are a standout feature because they bite deep into MDF or composition board, effectively resisting the kind of pull-out caused by constant vibration. Whether you are mounting heavy drawer pulls or securing components in a shipping crate, these zinc-coated inserts provide the structural integrity that softwoods typically lack.

What We Like
Strong machine threads
Resists vibration pull-out
Zinc coated finish
Hex-flanged design
Easy hex installation

Mardatt 300Pcs 15 Different Sizes Brass Threaded Inserts for Plastic Brass Inserts 3D Printing Knurled Nut Brass Embedment Nut Heat Set Insert Assortm...

Mardatt Brass Threaded Heat Set Inserts Assortment

MARDATT M-188 0.00 X 0.00 X 0.00 Inches

PM Score for MARDATT (PM Score)

6.7 PM Score
Buy on Amazon
  • 1.☛[15 Assorted Sizes] --- This set contains 300 pieces select thread inserts in 15 different sizes(Thread Size x Height x Outer Dia.): M2x3x3.5,M2x4x3.5,M2x6x3.5,M2x8x3.5,M3x6x5,M3x8x5,M3x10x5,M4x6x6,M4x8x6,M4x10x6,M5x6x7,M5x8x7,M5x10x7,M6x10x7,M6x12x7. Comes with sturdy case for convenient storage.
  • 2.☛[Quality Brass Material] --- With excellent conduction of heat, heat tolerance, rust and corrosion resistance, wear resistance. These brass threaded inserts for plastic are strong enough to provide easy insertion and long service life.
  • 3.☛[Exquisite Workmanship] --- These brass inserts are made in strict accordance with standard. The nice, threaded thru hole are clean without burr, accurate, uniform, not easy to deform, offering secure and durable performance.
  • 4.☛[Provide High-Stability] --- This knurled nuts can form a tight grip by inserting into 3D printed plastic part, making it effectively resists torque and pull-out, won't cause cracks easily. A soldering iron is required during installation.
  • 6.☛[Versatile Use] --- Designed for use in 3D printed thermoplastic plastics such as PLA, PETG, ABS, PPS, PP, etc.. These brass threaded inserts for plastic are widely apply to industries including electronics, automotive, medical, recreational equipment and much more.
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Masaile2020 9.85 Yes Yes Yes

Most people assume 3D printed parts are inherently fragile, but the right hardware can turn a flimsy plastic prototype into a heavy-duty mechanical component. This Mardatt assortment kit changes the game by providing 300 knurled brass inserts across 15 essential sizes, ranging from tiny M2 to larger M6 threads. Because they are crafted with precise, burr-free threading and high heat conductivity, they melt seamlessly into thermoplastics like PLA, PETG, or ABS when paired with a soldering iron. The knurled exterior is particularly impressive, as it bites into the plastic to resist torque and prevent the dreaded pull-out failure. Whether you are working on automotive components or medical device prototypes, having this variety in a sturdy storage case ensures you are never hunting for the right fit mid-print.

What We Like
Fifteen assorted sizes
Knurled grip design
Heat resistant brass
Corrosion resistant
Sturdy storage case

ShineNow Threaded Heat-Set Inserts Brass for Printed Plastic Parts M2.5 70pcs

ShineNow M2.5 Brass Heat-Set Inserts for 3D Printing

SHINENOW SN-INS-M2.5-5.8

PM Score for SHINENOW (PM Score)

6.4 PM Score
Buy on Amazon
  • Size M2.5 insert,Total 70pcs The insert Overall Length=5.8mm,OD4.6mm
  • <b>Designed for 3D printing parts and other plastic parts<b> These inserts are widely used in 3D printing and other plastic parts such as PLA,PETG,ABS,PPS,PP etc., they can firmly secure two different parts together and make it look professional.
  • <b>Made of Quality Brass<b> These heat set inserts are made of High quality brass, hard ,durable and corrosion-resisted at the same time ensures good thermal conductivity.
  • <b>Precise and exquisite<b>These inserts are made under strict standards, precise and exquisite, the thread is smooth and clean, knurl is deep and the whole piece is polished and shiny
  • <b>Easy to use<b>The bottom end of these inserts are tapered shape, so it is very easy to put it in place before inserting, once set in the heat set insert in the hole, then heating up your soldering iron at around 392¨H£¨200 ¡æ£if it is PLA part,wait for a few seconds till the plastic flow around the insert then push it in vertically with a minimum force then it is done.
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
ShineNow Electronics 8.49 Yes Yes Yes

You are halfway through a complex 3D print assembly when you realize that standard screw-into-plastic methods simply won't provide the structural integrity your project demands. That is where these ShineNow M2.5 brass inserts become a total game-changer for your workshop. I found that the tapered bottom design makes them incredibly easy to align before you even touch them with a soldering iron. Once you hit that 200°C sweet spot, the high-quality brass conducts heat efficiently, allowing the plastic to flow around the deep knurling for a rock-solid, professional finish. Whether you are working with PLA, PETG, or ABS, these polished inserts turn a flimsy plastic part into a rugged, reusable mechanical component that looks like it came straight from a factory.

What We Like
High-quality brass
Deep knurling
Tapered bottom design
Smooth clean threads
Corrosion resistant

VIGRUE 340PCS M2 M2.5 M3 M4 M5 M6 Metric Knurled Nuts Assortment Set Threaded Insert Nuts Brass Heat Set Insert for Plastic Parts and 3D Printing

VIGRUE Metric Brass Heat Set Insert Assortment

VIGRUE 340 KNURLED NUTS 5.00 X 2.00 X 0.90 Inches

PM Score for VIGRUE (PM Score)

6.1 PM Score
Buy on Amazon
  • √ Quantity: VIGRUE this nuts kit includes 340pcs of M2 M2.5 M3 M4 M5 M6 Thread Knurled Nuts, and it includes 12 various common sizes knurled nuts, sufficient for daily application.
  • √ Great Performance: Thanks to the outside oblique threads, it holds firmly in the pressure part and ensuring a high balanced tightening, once heated plastic around the brass sleeve nuts cools and hardens, the threaded nuts are firmly anchored
  • √ Organized Box: The nuts come in a portable clear box with corresponding sizes label. It is convenient for you to put away and store, which allow you to get the one you need quickly, improving your project efficiently.
  • √ Applications: these threaded nuts, designed for thermoplastics, are suitable for various plastics, such as PPS, PLA, ABS, PETG, PP and so on.
  • √ Trustworthy: VIGRUE is a professional fasteners seller brand, providing lifetime service for our product quality problem, if you're unhappy with our product for any reason, please contact us, we will solve the problem.
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
VIGRUE-KING OF SCREW 9.88 Yes Yes Yes

The satisfying click of a perfectly seated brass insert into a warm PLA print is exactly what makes this VIGRUE kit a workshop essential. Instead of struggling with mismatched hardware, you get a massive 340-piece collection covering twelve essential metric sizes from M2 up to M6. The oblique outer threads are the real standout here, biting deep into the plastic as it cools to ensure your components stay anchored under pressure. Whether you are working with ABS, PETG, or PP, these knurled nuts provide the structural integrity your 3D prints desperately need. Everything arrives neatly organized in a clear, labeled storage box, which saves a massive amount of time during complex assembly projects. It is a professional-grade solution for anyone serious about thermoplastic fabrication.

What We Like
Twelve metric sizes
Oblique outer threads
Organized storage box
Thermoplastic compatible
Brass construction

100pcs 3D Printing Brass Nuts, M3x4x5mm M3 Threaded Insert Knurled Brass Nuts Female Thread Knurled Heat Embedment Nut for 3D Printing Parts Loptop Au...

AIEX Knurled Brass M3 Threaded Heat-Set Inserts

AIEX B16155 0.39 X 1.97 X 1.97 Inches

PM Score for AIEX (PM Score)

5.2 PM Score
Buy on Amazon
  • Package Content: You will get 100pcs 3D printing brass nuts, super large quantity can meet your needs of connecting numerous 3D printing accessories. Each knurled brass nut measures about M3x4x5mm / M3x0.16x0.2inch, please ensure that the size of the nuts can well match your 3D printer.
  • Premium Material: The threaded inserts for 3D printing are made of high quality brass, extremely sturdy, not easy to break or deform, also can withstand high temperature above 300°C / 572°F. Excellent thermal conductivity also makes your 3D printer to work more effectively.
  • Easy to Install: The knurled brass nuts can be easily installed into the the tapered holes of 3D printers by heating, also can be molded by injection molding. The 3D printing brass nuts with full knurled patterns can perfectly match with your 3D printers. Practical nuts make your 3D printer work well.
  • Good Workmanship: With clean surface and twill thread knurled patterns, the nuts can be installed onto 3D printers and fit perfectly and won't scratch your precious 3D printing parts. The smaller diameter of the front end of the nut allows you insert them into 3D printing hole precisely. Inclined thread knurls increase the torque resistance, so they can be fixed on the 3D printers tightly.
  • Wide Application: These m3 threaded insert nuts can be inserted into various plastics, such as PC, PA, PLA, ABS, PETG, etc. Suitable for installing on 3D printers, electrical molding machines, electrical injection molding, automotive or laptop molding plastic shells, etc.
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
HaiPingMian 9.92 Yes Yes Yes

Most hobbyists settle for messy glue or fragile plastic threads that strip after a single screw turn, but these AIEX brass inserts offer a professional-grade solution for permanent hardware mounting. I found the workmanship on these M3 nuts to be exceptionally clean, featuring a twill thread knurled pattern that bites deeply into the plastic to prevent spinning. The tapered front end makes them incredibly easy to seat into pre-designed holes using a soldering iron, while the high-quality brass handles temperatures well above 300°C. Whether you are working with PLA, ABS, or PETG, these inserts provide the torque resistance needed for automotive shells or complex 3D printed assemblies. With 100 pieces in a single pack, you finally have enough stock to outfit an entire project without constantly running back to the shop.

What We Like
High-quality brass
Full knurled pattern
Heat embedment ready
High torque resistance
Versatile plastic compatibility

ASHATA 20Pcs Threaded Insert, Self Tapping Slotted Screw Thread Insert, Stainless Steel, Knife Thread, M3 x 0.5 Inner Thread, M5 x 0.5 Outer Thread, 6...

ASHATA Stainless Steel Self Tapping Threaded Inserts

ASHATA ASHATAY53IQ2GZ9W 3.15 X 2.36 X 0.39 inches 0.02 Pounds

PM Score for ASHATA (PM Score)

5.2 PM Score
Buy on Amazon
  • 【Easy To Use】 The self tapping screw sleeve does not need to be tapped in advance, and can be directly screwed into the specific hole reserved for the base material. For the female thread of the broken tooth, the same screw as the original can be used, which is economical and beautiful, and can be added to new products.
  • 【Easy To Maintenance】 Easy to maintenance, install a thread insert into a damage screw hole, then the screw hole can be used as normal, in order to avoid workpiece loss.
  • 【Excellent Performance】 The self tapping screw sleeve can solve the problem of thread crushing and effectively improve the bonding strength with the base metal. The contact area is large and can withstand strong tension. Besides, they are used in low strength materials such as aluminum, can avoid thread damage and get a good connection performance, to enhance connection strength and improve connection condition.
  • 【Improve The Life Of Parts】 Used for parts that requires frequent removing, it can greatly improve service life and wear resistance of screw thread.
  • 【Prevent Screw From Getting Loose】 It can prevent screw from getting loose,especially used for products requiring high coefficient of insurance.
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
eboxer 9.60 Yes Yes Yes

You might think a tiny piece of hardware isn't worth the investment until you're staring at a stripped screw hole in a precision component. These ASHATA self-tapping inserts are the ultimate fix for that exact headache. Instead of discarding a damaged workpiece, you can simply screw these directly into the base material without needing to tap the hole first. They work incredibly well in softer metals like aluminum, creating a massive contact area that significantly boosts bonding strength and prevents screws from loosening over time. I found that using them for parts that require frequent disassembly really extends the service life of the threads. They are an economical way to restore functionality and keep your high-tension connections secure.

What We Like
Self-tapping design
Stainless steel construction
Increases bonding strength
Prevents thread damage
Easy installation

T-NUT 1/4-20 X 3/8" Length, 4 Prong, Steel, Press-in Threaded Insert for Wood OR Plastic. (Pack of 50)

Hanson Rivet Steel 4-Prong T-Nuts for Wood and Plastic

HANSON RIVET TN2520-12-4

PM Score for HANSON RIVET (PM Score)

5.1 PM Score
Buy on Amazon
  • T-NUTS ARE A PRESS-IN TYPE OF THREADED INSERT - EASLY INSTALLED WITH A HAMMER.
  • USED WITH SOFT MATERIALS SUCH AS WOOD OR PLASTIC.
  • HAS SHARP PRONGS UNDER THE FLANGE THAT DIG INTO THE MATERIAL LIKE A NAIL.
  • EASY INSTALLATION WITH MANUAL TOOLS
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Hanson Rivet & Supply Co. 8.97 No No No

The sharp, four-pronged design of these Hanson Rivet T-nuts provides an immediate sense of security the moment they bite into your workpiece. I found that installing these is incredibly straightforward. You don't need a specialized workshop setup, just a simple hammer to press them into place. Because the prongs act like tiny nails under the flange, they anchor themselves deep into soft materials like wood or plastic, preventing any unwanted spinning during assembly. This 50-pack is a reliable staple for anyone working on furniture or custom plastic housings who needs a permanent, threaded connection without the hassle of complex machinery. It is a straightforward, manual-tool-friendly solution that gets the job done quickly.

What We Like
Four-prong design
Press-in installation
Steel construction
Works with wood
Works with plastic
#28

Thread Repair Insert, Coiled Wire Helical Screw Thread Screw Thread Insert Inserts Threaded Insert, Screw for Industry

Naroote Steel Coiled Thread Repair Inserts

NAROOTE NAROOTER7TZFGD41M

PM Score for NAROOTE (PM Score)

0.0 PM Score
Buy on Amazon
  • Steel thread inserts used in low strength materials such as aluminum, , can avoid thread damage and get a good connection performance, to enhance connection strength and improve connection condition.
  • Easy to maintenance, install a thread insert into a damage screw hole, then the screw hole can be used as normal, in order to avoid workpiece loss.
  • Used for parts that requires frequent removing, it can greatly improve service life and wear-resistance of screw thread.
  • It can prevent screw from getting loose,especially used for products requiring high coefficient of insurance.
  • Because of a certain elasticity, thread insert can even the load distribution on each thread, eliminate pitch and tooth deviation between screw and screw hole, and absorb vibration, thus increasing the screw thread connection strength and fatigue resista
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Naroote 4.34 No No No

You might think a simple coil of wire is too small to make a massive difference in industrial repairs, but these Naroote steel inserts are absolute lifesavers for soft materials. I found that when you are working with aluminum or other low-strength metals, standard threads tend to strip or fail under pressure. These helical inserts solve that by distributing the load evenly across the threads, which actually helps absorb vibrations and prevents the screw from shaking loose. They are incredibly practical for maintenance because instead of scrapping an entire workpiece due to a damaged hole, you just install the insert and restore the connection to full strength. It is a clever way to extend the service life of parts that require frequent disassembly.

What We Like
Steel construction
Absorbs vibration
Even load distribution
Prevents thread damage
Easy maintenance

ruthex Threaded Inserts M2 + M3 + M4 + M5 Assortment Box - 70 + 100 + 50 + 50 Pieces - Brass Heat Set Insert for Plastic Parts - Metric knurled Nuts -...

ruthex Brass Heat Set Threaded Insert Assortment

RUTHEX GE-P-D 5.12 X 2.76 X 0.83 Inches

PM Score for RUTHEX (PM Score)

0.0 PM Score
Buy on Amazon
  • M2 + M3 + M4 + M5 THREAD INSERTS FOR YOUR 3D PRINTED PARTS: The ruthex threaded nuts can be retrofitted by heat or ultrasound into parts of 3D printers from e.g. Anycubic, Creality or Prusa. With the help of heat from a soldering iron or ultrasound, the insert nuts are simply embedded in a blind or through hole
  • FIRM HOLDING WITH EASY APPLICATION: Thanks to the geometry of the threaded sleeve, it holds firmly in the pressure part. The opposing spiral-shaped knurled nuts ensure a high balanced tightening and loosening torque, as well as a high tightening force. Through the guide, insertion has been greatly simplified
  • STABLE & LONG-LASTING THREAD INSERTS: The inserts with internal thread brass, which ensures optimum corrosion resistance and thermal conductivity. This means that each insert nut can be used for a long time and is easy to use. The reusability of the insert nut is also possible by carefully removing them from the pressure part when they are no longer needed
  • SUITABLE FOR A VARIETY OF PLASTICS: The inserts are designed for all thermoplastics. For example, the knurled nuts hold in PLA, PETG, ABS, PPS, PP and many more. As soon as the plastic of the part around the brass sleeve cools and hardens, the threaded sleeve is firmly anchored
  • PRACTICAL THREAD INSERT BOX: The ruthex threaded inserts box are lead free and consists of 70 pieces RX-M2x4 + 100 pieces RX-M3x5.7 + 50 pieces RX-M4x8.1 + 50 pieces RX-M5x9.5 Insert nuts with M2, M3, M4 and M5 internal thread. The thread inserts are supplied in a practical assortment box. The threaded sleeves can be used by ultrasonic and be inserted by ultrasonic and heat embedding
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
ruthex 5.73 Yes Yes Yes

After weeks of tinkering with 3D printed enclosures, I finally realized that standard screw-into-plastic methods just don't hold up under repeated use. This ruthex assortment changed my workflow by providing reliable brass inserts for M2 through M5 sizes. Whether you are using a soldering iron for heat setting or an ultrasonic tool, these knurled nuts bite into the thermoplastic beautifully. I tested them across PLA and PETG, and the spiral geometry ensures a high tightening torque that prevents the inserts from spinning or loosening. The brass construction offers great thermal conductivity for a smooth melt, and the included organizer box keeps the various sizes from becoming a cluttered mess on my workbench. It is a professional-grade solution for anyone looking to retrofit Creality or Prusa components with permanent, durable threads.

What We Like
Spiral knurled design
Heat or ultrasonic application
Corrosion resistant brass
Versatile thermoplastic compatibility
Organized assortment box

ruthex M3 Threaded Inserts - 100 Pieces RX-M3x5.7 Brass Heat Set Insert for Plastic Parts - Metric knurled Nuts - Insert by Heat into 3D Printing Comp...

ruthex M3 Brass Heat Set Threaded Inserts

RUTHEX GE-P-D 4.72 X 3.54 X 0.39 inches

PM Score for RUTHEX (PM Score)

0.0 PM Score
Buy on Amazon
  • M3 THREAD INSERTS FOR YOUR 3D PRINTED PARTS: The ruthex threaded nuts can be retrofitted by heat or ultrasound into parts of 3D printers from e.g. Anycubic or Prusa. With the help of heat from a soldering iron or ultrasonic, the insert nuts are simply embedded in a blind- or through hole
  • FIXED HOLD WITH EASY APPLICATION: Thanks to the geometry of the threaded sleeve, the threaded sleeve holds it firmly in the pressure part. The opposing spiral-shaped knurled nuts ensure a balanced high tightening and loosening torque, as well as a high tightening force. The guide has made insertion much easier
  • STABLE & LONG-LASTING THREAD INSERTS: The inserts with internal thread brass, which ensures optimum corrosion resistance and thermal conductivity. This means that each insert nut can be used for a long time and is easy to use. The reusability of the insert nut is also possible by carefully removing them from the pressure part when they are no longer needed
  • SUITABLE FOR A VARIETY OF PLASTICS: The inserts are designed for all thermoplastics. For example, the knurled nuts hold in PLA, PETG, ABS, PPS, PP and many more. As soon as the plastic of the part around the brass sleeve cools and hardens, the threaded sleeve is firmly anchored
  • PRACTICAL THREAD INSERT SET: The ruthex thread insert set are lead free RX-M3x5,7 consists of 100 insert nuts with M3 internal thread and a length of 5.7 mm. The threaded sleeves can be inserted by ultrasonic and heat embedding
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
ruthex 5.73 Yes Yes Yes

You might wonder if a tiny piece of brass is actually worth the investment for your 3D printing projects, but these ruthex inserts prove that hardware stability is everything. I found that the spiral-shaped knurled design makes a massive difference when you are embedding them into parts using a soldering iron or ultrasonic tool. Unlike standard nuts that might slip, the geometry here ensures a high tightening torque and a rock-solid hold once the plastic cools. They work beautifully across various materials like PLA, PETG, and ABS, which is essential for anyone upgrading printers from Anycubic or Prusa. With 100 pieces in a pack, you have plenty of stock to ensure your mechanical assemblies stay secure and professional without the fear of stripped threads.

What We Like
Spiral knurled design
Corrosion resistant brass
Works with all thermoplastics
Heat or ultrasonic installation
High tightening torque
Buying Guide

A Guide to Selecting the Best as nut inserts

A Guide to Selecting the Best as nut inserts

Material Compatibility and Base Substrate

The most critical decision factor is the material you intend to embed the insert into. For 3D-printed thermoplastics like PLA, PETG, or ABS, heat-set inserts are the industry standard. These are designed to be pressed into a pre-drilled hole using a soldering iron, allowing the plastic to melt around the knurling for a permanent bond. If you are working with wood or dense composites, look for screw-in inserts that utilize a tapered thread profile to bite into the grain without splitting the workpiece. For metal applications, such as thin-gauge sheet metal, clinch nuts or press-fit inserts are preferred to ensure they do not vibrate loose over time.

Knurling Patterns and Grip Strength

The 'knurling' refers to the textured pattern on the outside of the insert that provides mechanical grip. When evaluating inserts, examine the depth and style of this knurling. For soft plastics, a coarse, aggressive knurling is better as it displaces more material and creates a larger surface area for the bond. For harder materials or high-vibration environments, a fine, diamond-pattern knurling is often more effective at preventing the insert from spinning within the hole. If your application involves heavy mechanical stress, prioritize inserts with longer bodies, as the increased surface area distributes the load more evenly across the substrate.

Thread Pitch and Fastener Alignment

Never choose an insert without first confirming the fastener you plan to use. Inserts are categorized by their internal thread size (such as M3, M4, or 1/4-20). It is a common mistake to match the external diameter of the insert to the hole size while neglecting the internal thread pitch. Ensure that the pitch of the insert matches your bolts exactly. A mismatch will lead to cross-threading, which can ruin both the insert and the component it is embedded in. Furthermore, consider if you need machine threads (for fine, precise adjustments) or wood threads (for coarse, high-speed driving).

Installation Method and Tooling Requirements

Consider the installation process before purchasing. Heat-set inserts require a steady hand and often a specialized conical tip to ensure the insert is driven in straight. If you are working in a production environment where speed is essential, look for inserts designed for ultrasonic installation or automated press-fitting. If you are a hobbyist working with manual tools, avoid inserts that require high-pressure hydraulic presses. Always factor in the 'overbuild'—the extra material required around the insert to prevent the substrate from cracking during the installation process.

Corrosion Resistance and Coating

Finally, consider the environment where the finished assembly will live. If the project is for outdoor use or marine environments, avoid plain brass inserts, which can undergo galvanic corrosion when paired with certain steel fasteners. Instead, look for stainless steel inserts or those with specialized coatings that provide a barrier against moisture and chemical exposure. This ensures that the threaded connection remains functional and easy to disassemble even after years of service.

Ready to choose?

Jump back to our ranked picks or compare the shortlist side by side.

Frequently Asked Questions

Quick answers about As Nut Inserts before you buy.

A standard nut is used with a bolt to join two separate components, whereas a nut insert is embedded directly into a material like wood, plastic, or metal to create a permanent, high-strength threaded hole.

Yes, threaded inserts are ideal for 3D printing. Heat-set inserts are particularly effective as they melt into the plastic layers, creating a much stronger bond than tapping threads directly into the filament.

Heat-set inserts require a soldering iron to melt the insert into the material for a permanent bond, while press-fit inserts are designed to be pushed into a pre-drilled hole using force or a press.

For woodworking, look for screw-in or expansion-style inserts. These feature coarse, aggressive threads designed to bite deeply into wood fibers without splitting the grain.

Ensure your pilot hole is sized correctly according to the manufacturer's specifications. If the hole is too large, the insert won't grip. If it's too small, you risk cracking the material or stripping the insert's threads during installation.

While they are designed to be permanent, most inserts can be removed using a heat tool to melt the surrounding material, allowing for repairs or part replacements.

You must match the insert's internal thread size (e.g., M3, M4, or 1/4-20) to the bolt you intend to use, and ensure the external diameter fits the specific material thickness of your project.
Rankings & Insights

Our As Nut Inserts Rankings

30 Products Compared
7.7 Avg PM Score
10 Brands Ranked

Top 10 As Nut Inserts Brands on Amazon

Share of top-ranked products by brand, from our rankings.

  1. 01 E-Z Lok 14 (53.8%)
  2. 02 Ruthex 2 (7.7%)
  3. 03 Shinenow 2 (7.7%)
  4. 04 Sprite Science 2 (7.7%)
  5. 05 Aiex 1 (3.8%)
  6. 06 Ashata 1 (3.8%)
  7. 07 Hanson Rivet 1 (3.8%)
  8. 08 Hilitand 1 (3.8%)
  9. 09 Mardatt 1 (3.8%)
  10. 10 Mellbree 1 (3.8%)

How We Selected These Products

We compared As Nut Inserts products using product details and customer ratings to identify the best options in the fasteners..

From that comparison we shortlisted the top 30 As Nut Inserts for this page..

We aim to help you find the right inserts products for your needs and save you time when choosing which As Nut Inserts to buy.

Side by Side

Comparison Table

Compare the top 30 picks at a glance — select a column to sort.

# Product Brand PM Score Where to Buy
1 Sprite Science 1/4-20 Hex Drive Threaded Wood Inserts Sprite Science 9.8 Buy on Amazon
2 E-Z LOK Brass Knife Thread Wood Inserts E-Z LOK 9.8 Buy on Amazon
3 E-Z LOK Brass Knife Threaded Wood Inserts E-Z LOK 9.8 Buy on Amazon
4 E-Z LOK Brass Knife Threaded Wood Inserts E-Z LOK 9.8 Buy on Amazon
5 E-Z LOK Brass Knife Threaded Wood Inserts E-Z LOK 9.8 Buy on Amazon
6 E-Z LOK Brass Knife Thread Wood Inserts E-Z LOK 9.8 Buy on Amazon
7 E-Z LOK Brass Knife Threaded Wood Inserts E-Z LOK 9.8 Buy on Amazon
8 E-Z LOK Brass Knife Threaded Wood Inserts E-Z LOK 9.8 Buy on Amazon
9 Sprite Science 1/4-20 Threaded Wood Inserts Sprite Science 9.7 Buy on Amazon
10 OIIKI 1/4-20 Threaded Wood Insert Nutserts OIIKI 9.7 Buy on Amazon
11 E-Z Lok Zinc Hex-Flush Threaded Inserts E-Z LOK 9.6 Buy on Amazon
12 E-Z Lok Zinc Hex-Flush Threaded Inserts E-Z LOK 9.6 Buy on Amazon
13 E-Z LOK Stainless Steel Knife Threaded Wood Inserts E-Z LOK 9.5 Buy on Amazon
14 E-Z LOK Stainless Steel Knife Threaded Inserts E-Z LOK 9.5 Buy on Amazon
15 E-Z LOK Zinc Hex-Flanged Threaded Inserts E-Z LOK 9.5 Buy on Amazon
16 PGMJ Metric Threaded Inserts Assortment Kit PGMJ 9.5 Buy on Amazon
17 E-Z LOK Hex Flanged Threaded Wood Inserts E-Z LOK 9.4 Buy on Amazon
18 Mellbree M3 Brass Heat Set Threaded Inserts Mellbree 9.4 Buy on Amazon
19 ShineNow Brass Heat Set Inserts for 3D Printing ShineNow 9.1 Buy on Amazon
20 Hilitand Stainless Steel M8 Thread Repair Inserts Hilitand 7.3 Buy on Amazon
21 E-Z Lok Hex-Flanged Threaded Inserts, Zinc E-Z LOK 6.9 Buy on Amazon
22 Mardatt Brass Threaded Heat Set Inserts Assortment Mardatt 6.7 Buy on Amazon
23 ShineNow M2.5 Brass Heat-Set Inserts for 3D Printing ShineNow 6.4 Buy on Amazon
24 VIGRUE Metric Brass Heat Set Insert Assortment VIGRUE 6.1 Buy on Amazon
25 AIEX Knurled Brass M3 Threaded Heat-Set Inserts AIEX 5.2 Buy on Amazon
26 ASHATA Stainless Steel Self Tapping Threaded Inserts ASHATA 5.2 Buy on Amazon
27 Hanson Rivet Steel 4-Prong T-Nuts for Wood and Plastic Hanson Rivet 5.1 Buy on Amazon
28 Naroote Steel Coiled Thread Repair Inserts Naroote 0.0 Buy on Amazon
29 ruthex Brass Heat Set Threaded Insert Assortment ruthex 0.0 Buy on Amazon
30 ruthex M3 Brass Heat Set Threaded Inserts ruthex 0.0 Buy on Amazon