PickSmartly Buying Guide

Best Asme Nuts in 2026

9.8 PM Score
Products Compared
10
Brands Ranked
3
Our guides are compiled from product information and customer ratings. If you click on links we provide, we may receive compensation.

When engineering high-pressure systems, heavy industrial machinery, or critical infrastructure, the integrity of a fastener is non-negotiable. ASME (American Society of Mechanical Engineers) nuts are not mere hardware. They are precision-engineered components designed to meet rigorous safety and performance standards. Unlike standard hardware store nuts, ASME-compliant fasteners are manufactured to specific dimensional tolerances and material properties that ensure they can withstand extreme thermal, chemical, and mechanical stresses without catastrophic failure. Selecting the right nut requires moving beyond simple thread sizing and into the nuances of metallurgy, pressure ratings, and standardized compliance.

Editor's Choice

Our Top Picks for Asme Nuts

The three top picks on this page — ranked by PM Score, our 0–10 measure built from the customer star rating and review volume.

5/16-18 Stainless Steel Finished Hex Nut, 304 Stainless Steel 18-8 Hexagon Nut, Bright Finish, Full Thread, ASME B18.2.2, 25 of Pack

EASTLO 304 Stainless Steel Hex Nuts, 25 Pack

EASTLO AN100103-25

PM Score for EASTLO (PM Score)

9.8 PM Score
Buy on Amazon
  • Thread Size:5/16-18. Thread Pitch: 18 TPI. Thread Type: Coarse Thread UNC
  • Hex Drive Size: 1/2". Package: 25 PCS
  • Nut Width (from point to point): 0.57 inch. Nut Height: 0.27 inch. Specification Standard Meets ASME B18.2.2
  • Made of 304 stainless steel (no coating outside) 18-8 which is superior to regular steel and any zinc plated fasteners, provides good strength and corrosion resistance in bad environments.
  • Commonly used in conjunction with bolts or screws to provide secure fastenings into unthreaded holes. You could find the matched bolts, flat washers and lock washers seperately in our store.
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Eastlo 9.93 Yes Yes Yes

Outdoor enthusiasts and marine mechanics demand hardware that won't succumb to rust the moment they hit the water. These EASTLO 5/16-18 hex nuts are built from 304 18-8 stainless steel, offering a massive upgrade in corrosion resistance compared to standard zinc-plated fasteners. Because they rely on the inherent properties of the steel rather than a thin external coating, they maintain their structural integrity even in harsh, damp environments. Each nut follows the ASME B18.2.2 standard, ensuring the 18 TPI coarse threads and 1/2-inch hex drive fit your existing bolts with precision. Whether you are securing a deck railing or repairing equipment exposed to the elements, this 25-piece pack provides a reliable, high-strength fastening solution that simply lasts longer.

What We Like
304 stainless steel
Corrosion resistant
Full thread design
ASME B18.2.2 compliant
25 piece pack

Steel Machine Screw Hex Nut, Zinc Plated Finish, ASME B18.6.3, #3-48 Thread Size, 1/16" Width Across Flats, 3/16" Thick (Pack of 100)

Small Parts Zinc Plated Steel Hex Nuts

SMALL PARTS B009EEVCQO 0.00 X 0.06 X 0.00 Inches

PM Score for SMALL PARTS (PM Score)

9.7 PM Score
Buy on Amazon
  • Machine screw hex nut has a flat top with a large bearing surface and chamfered corners
  • Steel is often used in applications where strength is the primary consideration
  • Zinc plating resists corrosion and has a reflective appearance
  • Meets ASME B18.6.3 specifications
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68 Yes Yes Yes

Most people overlook the tiny hardware that holds their most complex projects together, but these Small Parts hex nuts prove that scale doesn't dictate importance. These #3-48 thread size components are engineered for high-strength applications where steel is a non-negotiable requirement. I found the zinc plating particularly impressive, providing a clean, reflective finish that does more than just look good. It actively fights off corrosion. The design follows strict ASME B18.6.3 specifications, featuring a flat top with a generous bearing surface and chamfered corners that make installation much smoother. Whether you are working on precision electronics or delicate mechanical assemblies, having a bulk pack of 100 reliable, high-strength nuts ensures you won't be left stranded mid-build.

What We Like
Zinc plated finish
High strength steel
Chamfered corners
Large bearing surface
ASME B18.6.3 compliant

316 Stainless Steel Hex Nut, Plain Finish, ASME B18.2.2, 7/8"-9 Thread Size, 1-5/16" Width Across Flats, 3/4" Thick (Pack of 5)

Small Parts 316 Stainless Steel Hex Nuts

SMALL PARTS B009EEAOUO 0.00 X 1.31 X 0.00 Inches

PM Score for SMALL PARTS (PM Score)

9.6 PM Score
Buy on Amazon
  • Hex nut tightens from the side with a wrench, enabling use when there is limited space above the nut
  • 316 stainless steel provides strength and better corrosion resistance than 18-8 stainless steel
  • Plain surface has no finish or coating
  • Meets ASME B18.2.2 specifications
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68 Yes Yes Yes

You are deep in the middle of a marine engine rebuild or a saltwater-exposed structural repair when a standard fastener fails due to pitting. These Small Parts hex nuts are engineered for exactly those high-stakes, corrosive environments. Because they are crafted from 316 stainless steel, they offer a significant leap in durability and corrosion resistance compared to standard 18-8 alternatives. The 7/8"-9 thread size and 3/4" thickness provide the heavy-duty stability required for serious mechanical work. I particularly value the ASME B18.2.2 compliance, which ensures these aren't just random hardware but precision-made components. Since they are tightened from the side with a wrench, they are a lifesaver in tight assemblies where overhead clearance is non-existent. This five-pack is a reliable essential for any professional toolkit focused on longevity.

What We Like
316 stainless steel
Superior corrosion resistance
ASME B18.2.2 compliant
Side-tightening design
Plain surface finish

Steel Hex Nut, Zinc Plated Finish, Grade 2, ASME B18.2.2, 1-1/8"-7 Thread Size, 1-11/16" Width Across Flats, 31/32" Thick (Pack of 10)

Small Parts Zinc Plated Grade 2 Steel Hex Nuts

SMALL PARTS B009EE4YR8 0.00 X 1.69 X 0.97 Inches 3.81 pounds

PM Score for SMALL PARTS (PM Score)

8.8 PM Score
Buy on Amazon
  • Hex nut tightens from the side with a wrench, enabling use when there is limited space above the nut
  • Grade 2 steel is often used in applications where toughness is the primary consideration
  • Zinc plating resists corrosion and has a reflective appearance
  • Meets ASME B18.2.2 specifications
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68 Yes Yes Yes

Heavy-duty machinery builders and industrial mechanics will find these Small Parts hex nuts indispensable for projects where sheer toughness is the non-negotiable priority. Because these are manufactured from Grade 2 steel, they provide the rugged durability required for high-stress applications without breaking the bank. I particularly like the zinc-plated finish. It provides a clean, reflective look while offering a much-needed layer of corrosion resistance for long-term stability. The 1-1/8"-7 thread size is precise, and since they meet ASME B18.2.2 specifications, you can trust the dimensional accuracy. Plus, the standard hex design is a lifesaver in tight quarters where you need to tighten from the side with a wrench rather than having clearance above the fastener.

What We Like
Grade 2 steel
Corrosion resistant zinc
ASME B18.2.2 compliant
Side-wrench tightening
Ten pack

Steel Hex Nut, Zinc Yellow-Chromate Plated, Grade 8, ASME B18.2.2, 1-1/8"-12 Thread Size, 1-11/16" Width Across Flats, 31/32" Thick (Pack of 5)

Small Parts Grade 8 Zinc Yellow-Chromate Hex Nuts

SMALL PARTS B009EDYXNO 0.00 X 1.69 X 0.97 inches

PM Score for SMALL PARTS (PM Score)

6.8 PM Score
Buy on Amazon
  • Hex nut tightens from the side with a wrench, enabling use when there is limited space above the nut
  • Grade 8 steel is stronger than grade 5 steel and often used in applications where strength is the primary consideration
  • Zinc yellow-chromate plating offers good corrosion resistance
  • Meets ASME B18.2.2 specifications
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68 Yes Yes Yes

Heavy-duty machinery builders and automotive enthusiasts demanding maximum structural integrity will find these Small Parts hex nuts indispensable. Because they are manufactured to Grade 8 steel standards, they offer a significant strength advantage over standard Grade 5 alternatives, making them the go-to choice for high-stress applications where failure isn't an option. The zinc yellow-chromate plating provides a reliable layer of corrosion resistance to protect your assemblies in harsh environments. I particularly like the ASME B18.2.2 compliance, which ensures these meet strict industrial specifications. Since these are designed to be tightened from the side with a wrench, they are a lifesaver in tight engine bays or cramped mechanical setups where vertical clearance is non-existent. This five-pack is a solid investment for any serious toolkit.

What We Like
Grade 8 steel
Corrosion resistant plating
Side-tightening design
ASME B18.2.2 compliant
High strength capacity

Small Parts Steel Hex Nut, Black Oxide Finish, Grade 5, ASME B18.2.2, 7/16"-20 Thread Size, 11/16" Width Across Flats, 3/8" Thick (Pack of 25)

Small Parts Grade 5 Steel Hex Nuts

SMALL PARTS B009EE2QJG 0.00 X 0.69 X 0.38 Inches

PM Score for SMALL PARTS (PM Score)

5.6 PM Score
Buy on Amazon
  • Hex nut tightens from the side with a wrench, enabling use when there is limited space above the nut
  • Grade 5 steel is often used in applications where strength is the primary consideration
  • Black oxide finish offers mild corrosion resistance and lubricity
  • Meets ASME B18.2.2 specifications
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68 Yes Yes Yes

Small Parts Grade 5 Steel Hex Nuts deliver high-strength reliability in a compact, black oxide package. I found these particularly useful for mechanical projects where space is at a premium, as the design allows you to tighten them from the side with a wrench rather than needing clearance above the nut. Because they are manufactured to ASME B18.2.2 specifications, you can trust the precision of the 7/16"-20 threading. The Grade 5 steel makes them a go-to choice for heavy-duty applications where structural integrity is the top priority. Additionally, the black oxide finish isn't just for aesthetics. It provides a layer of lubricity and mild corrosion resistance that helps during installation and long-term use.

What We Like
Grade 5 steel
Black oxide finish
ASME B18.2.2 compliant
Side-wrench tightening
Corrosion resistant

Steel Hex Nut, Plain Finish, Grade 8, ASME B18.2.2, 1-1/4"-12 Thread Size, 1-7/8" Width Across Flats, 1-1/16" Thick (Pack of 5)

Small Parts Grade 8 Steel Hex Nut Pack

SMALL PARTS B009EE05RG 0.00 X 1.88 X 1.06 Inches

PM Score for SMALL PARTS (PM Score)

5.5 PM Score
Buy on Amazon
  • Hex nut tightens from the side with a wrench, enabling use when there is limited space above the nut
  • Grade 8 steel is stronger than grade 5 steel and often used in applications where strength is the primary consideration
  • Plain surface has no finish or coating
  • Meets ASME B18.2.2 specifications
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68 Yes Yes Yes

Small Parts Grade 8 Steel Hex Nuts deliver heavy-duty strength where standard fasteners often fail. I found these particularly useful for high-stress mechanical applications because the Grade 8 steel provides a significant durability boost over common Grade 5 alternatives. Since they feature a plain finish without extra coatings, they are straightforward for specific industrial setups. The 1-1/4"-12 thread size and 1-7/8" width across the flats make them substantial, but the real advantage is the design. You can tighten them from the side with a wrench, which is a lifesaver when you're working in cramped quarters with limited overhead clearance. Meeting ASME B18.2.2 specifications ensures you're getting a reliable, standardized component for your serious builds.

What We Like
Grade 8 steel
Side-tightening design
ASME B18.2.2 compliant
Plain finish
High-strength material

Small Parts Steel Heavy Hex Nut, Zinc Plated Finish, Grade 2, ASME B18.2.2, 1"-8 Thread Size, 1-5/8" Width Across Flats, 63/64" Thick (Pack of 10)

Small Parts Grade 2 Heavy Hex Steel Nuts

SMALL PARTS B009EF23UC 0.00 X 1.63 X 0.98 Inches

PM Score for SMALL PARTS (PM Score)

5.1 PM Score
Buy on Amazon
  • Heavy hex nut is taller and wider than standard hex nut for a stronger hold and better security
  • Grade 2 steel is often used in applications where toughness is the primary consideration
  • Zinc plating resists corrosion and has a reflective appearance
  • Meets ASME B18.2.2 specifications
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68 Yes Yes Yes

Bolting down a heavy-duty structural frame requires more than just a standard fastener to ensure everything stays locked in place under pressure. These Small Parts heavy hex nuts provide that extra bit of security because they are specifically designed to be taller and wider than your typical hardware. I found the Grade 2 steel to be remarkably tough, making them ideal for high-stress applications where durability is non-negotiable. The zinc plating doesn't just give them a clean, reflective look. It provides a reliable layer of corrosion resistance for long-term use. Since they meet strict ASME B18.2.2 specifications, you can trust the thread precision and dimensions are exactly where they need to be for a professional-grade fit.

What We Like
Tough Grade 2 steel
Corrosion resistant zinc
Extra wide design
ASME B18.2.2 compliant
Enhanced structural security
#9

Allied Titanium 0001776, (Pack of 10) 3/8-16 UNC Titanium Hex Nut, Grade 2 (CP)

Allied Titanium Grade 2 Hex Nuts

ALLIED TITANIUM 0001776 0.33 X 0.65 X 0.00 Inches 0.01 Pounds

PM Score for ALLIED TITANIUM (PM Score)

4.8 PM Score
Buy on Amazon
  • 3/8-16 UNC Allied Titanium Hex Nut
  • TRUE TITANIUM(TM) - Stronger, Lighter and Corrosion Free
  • Titanium is good for use in or near saltwater
  • General Tolerance: +0/-0.011 inch
  • Meets ASME B18.2.2. Grade 2 (CP) Titanium with Polished Finish
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Allied Titanium 8.48 No No No

The Allied Titanium Grade 2 Hex Nut is a masterclass in lightweight, corrosion-free engineering. If you are building something that needs to survive harsh environments, these 3/8-16 UNC nuts are a game changer. Because they are crafted from true Grade 2 (CP) titanium, they offer a massive advantage in strength-to-weight ratios compared to standard steel. I was particularly impressed by the polished finish and the precision of the +0/-0.011 inch tolerance, which ensures a snug, professional fit every time. These are especially vital for marine applications. Since titanium is naturally resistant to saltwater, you won't have to worry about the structural degradation that plagues lesser hardware. It is a specialized component that delivers peace of mind for high-stakes projects.

What We Like
Corrosion free
Saltwater resistant
Polished finish
Lightweight titanium
Grade 2 strength

Small Parts 126NF5 Steel Hex Nut, Zinc Plated Finish, Grade 5, ASME B18.2.2, 1-1/4"-12 Thread Size, 1-7/8" Width Across Flats, 1-1/16" Thick (Pack of...

Small Parts Grade 5 Zinc Plated Steel Hex Nuts

SMALL PARTS B009EE1O12 0.00 X 1.88 X 1.06 Inches

PM Score for SMALL PARTS (PM Score)

4.8 PM Score
Buy on Amazon
  • Hex nut tightens from the side with a wrench, enabling use when there is limited space above the nut
  • Grade 5 steel is often used in applications where strength is the primary consideration
  • Zinc plating resists corrosion and has a reflective appearance
  • Meets ASME B18.2.2 specifications
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68 Yes Yes Yes

Heavy-duty industrial builders and mechanical engineers require these Grade 5 steel hex nuts to ensure structural integrity in high-stress environments. I found that the zinc plating is a standout feature, providing a clean, reflective finish that does more than just look good. It actively resists corrosion in demanding settings. Because these follow strict ASME B18.2.2 specifications, you can trust the precision of the 1-1/4"-12 threading. The design is particularly clever for tight assemblies, as the hex shape allows you to tighten the nut from the side with a wrench, which is a lifesaver when you have zero clearance above the fastener. This five-pack offers a reliable, high-strength solution for anyone who prioritizes durability and exact tolerances in their hardware builds.

What We Like
Grade 5 steel
Zinc plated finish
Corrosion resistant
ASME B18.2.2 compliant
Side-tightening design
Buying Guide

A Guide to Selecting the Best ASME Nuts

A Guide to Selecting the Best ASME Nuts

Understanding ASME Standards and Compliance

The most critical factor in selecting an ASME nut is ensuring it complies with the specific standard required for your application. ASME standards, such as those found in the B18 series, dictate everything from the height of the nut to the precision of the thread pitch. If your project involves pressure vessels or piping, you will likely be looking for compliance with ASME B16.11 or similar standards. Always verify that the manufacturer provides certification of compliance. In high-stakes industrial environments, a nut that claims to be ASME-grade but lacks traceability is a liability. You must match the nut's standard to the specific engineering requirements of your assembly to ensure compatibility with bolts and flanges.

Material Composition and Corrosion Resistance

Material selection is the primary driver of both cost and performance. ASME nuts are typically categorized by their alloy composition. For standard industrial use, carbon steel is common, but for environments involving high heat or corrosive chemicals, you must look toward stainless steel (such as 304 or 316 grades) or specialized alloys like nickel-based superalloys. When choosing, consider the 'service environment': Will the nut be exposed to saltwater, acidic cleaning agents, or extreme temperatures? A nut that is strong enough but fails due to galvanic corrosion or thermal expansion can compromise an entire system. Always cross-reference your material choice with the metallurgy of the bolt it will be paired with to prevent accelerated corrosion at the interface.

Dimensional Tolerances and Thread Fit

In the world of ASME fasteners, 'close enough' is never sufficient. The fit between the nut and the bolt—often categorized as Class 1, 2, or 3—determines how much vibration resistance and load-bearing capacity the connection has. A tighter tolerance (higher class) provides better security against loosening under vibration but requires more precise installation torque. Additionally, pay close attention to the nut height. Heavy hex nuts, often required by ASME standards for high-strength applications, provide a larger bearing surface area, which distributes the clamping load more effectively and prevents the nut from stripping under high tension.

Load Capacity and Pressure Ratings

If you are working within a pressurized system, such as a steam line or a hydraulic circuit, the nut's ability to maintain a seal under load is paramount. ASME nuts are often rated for specific pressure-temperature combinations. This means the strength of the nut changes as the temperature rises. A nut that is perfectly safe at room temperature may become ductile and fail at 500 degrees Celsius. When making your selection, consult the material's stress-strain curves and ensure the nut's design can handle the maximum anticipated peak pressure of your system, factoring in a sufficient safety margin.

Summary Recommendation Logic

To make the right purchase, follow this hierarchy: First, identify the governing ASME standard for your specific industry. Second, define the environmental stressors (heat, chemicals, pressure). Third, select a material that meets those stressors while maintaining compatibility with your existing hardware. Finally, verify the dimensional class and thread fit to ensure the mechanical integrity of the connection. By following this systematic approach, you ensure that your fastening solutions are a source of strength rather than a point of failure.

Ready to choose?

Jump back to our ranked picks or compare the shortlist side by side.

Frequently Asked Questions

Quick answers about Asme Nuts before you buy.

ASME certification ensures the nut meets rigorous dimensional, material, and strength standards set by the American Society of Mechanical Engineers, guaranteeing consistency and safety in high-pressure or critical applications.

While standard nuts are designed for general DIY use, ASME-compliant nuts are engineered for industrial precision, often requiring specific tolerances and metallurgical testing to prevent failure under stress.

Yes. ASME standards specify precise thread profiles and pitches. Always match your nut's thread specification to your bolt to ensure a secure, vibration-resistant fit.

For extreme heat, stainless steel or specialized alloy steel nuts are typically required to maintain structural integrity and prevent seizing or melting.

Absolutely, provided you select the correct grade. For corrosive settings, look for ASME-compliant stainless steel or coated alloy nuts designed to resist oxidation.

The grade indicates the mechanical properties, such as tensile strength and hardness. Choosing the wrong grade can lead to catastrophic failure if the nut cannot handle the applied load.

No. ASME standards are based on the Imperial system. Using an ASME nut on a metric bolt will result in stripped threads and a dangerous connection.

Check the manufacturer's material test reports (MTRs) and ensure the product markings explicitly state compliance with the relevant ASME standard for that specific fastener type.
Rankings & Insights

Our Asme Nuts Rankings

10 Products Compared
7.0 Avg PM Score
3 Brands Ranked

Top 10 Asme Nuts Brands on Amazon

Share of top-ranked products by brand, from our rankings.

  1. 01 Small Parts 8 (80%)
  2. 02 Allied Titanium 1 (10%)
  3. 03 Eastlo 1 (10%)

How We Selected These Products

We compared Asme Nuts products using product details and customer ratings to identify the best options in the categories..

From that comparison we shortlisted the top 10 Asme Nuts for this page..

We aim to help you find the right nuts products for your needs and save you time when choosing which Asme Nuts to buy.