PickSmartly Buying Guide

Best General Tools Punches in 2026

9.8 PM Score
Products Compared
24
Brands Ranked
4
Our guides are compiled from product information and customer ratings. If you click on links we provide, we may receive compensation.

Whether you are a professional machinist, a hobbyist jeweler, or a DIY enthusiast working on automotive repairs, punches are the unsung heroes of the workshop. While they may seem like simple metal rods, the difference between a high-quality punch and a cheap imitation can mean the difference between a clean, precise mark and a ruined workpiece. A punch is designed to deliver concentrated force to a specific point, and selecting the wrong type can lead to tool deformation, surface marring, or even safety hazards. This guide will help you navigate the technical nuances of different punch types to ensure you have the right tool for every striking, marking, and driving application.

Editor's Choice

Our Top Picks for General Tools Punches

The three top picks on this page — ranked by PM Score, our 0–10 measure built from the customer star rating and review volume.

Spring Tools 32R02-1 Nail Set and Counter Punch

Spring Tools Nail Set and Counter Punch

SPRING TOOLS 32R02-1 0.50 X 2.90 X 7.80 Inches 0.10 Pounds

PM Score for SPRING TOOLS (PM Score)

9.8 PM Score
Buy on Amazon
  • Excellent for detail trim work with unrivaled precision and control. Perfect in tight spaces
  • Saves painters time and money
  • Guaranteed to be the best solution on the market
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Fireside Construction 6.20 No No No

Driving nails flush into delicate trim without marring the wood surface is a constant headache for anyone doing fine carpentry. This Spring Tools nail set and counter punch solves that problem by providing the unrivaled precision needed for tight, awkward spaces where standard hammers fail. I found that using this tool makes detail work much more manageable, offering a level of control that prevents accidental damage to your materials. It is a massive time-saver for painters and finishers who need to prep surfaces quickly and cleanly. At just over twelve dollars, it serves as a highly effective solution for anyone looking to professionalize their trim work and avoid the costly mistakes of over-driving a nail.

What We Like
Unrivaled precision
Tight space access
Saves painter time
Detail trim control

Spring Tools PM407 Nail Set and Hinge Pin Tool

Spring Tools Nail Set and Hinge Pin Tool

SPRING TOOLS PM407 0.50 X 2.75 X 8.75 Inches 0.23 Pounds

PM Score for SPRING TOOLS (PM Score)

9.8 PM Score
Buy on Amazon
  • The pack also includes a combination 1/32" and 2/32" nail set 32r12-1
  • Provides 3,500 pounds of impact striking force. Great for tight spaces
  • Patented design is safe and easy to use
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Spring Tools USA 5.60 Yes Yes Yes

Driving a nail flush in a cramped corner or a tight cabinet joint is a nightmare without the right leverage. The Spring Tools PM407 solves this headache by delivering a massive 3,500 pounds of impact striking force, allowing you to sink fasteners even when your swing is restricted. I found the patented design incredibly intuitive, making the tool feel safe and controlled rather than clumsy during heavy use. The kit is surprisingly versatile too, coming with a combination 1/32" and 2/32" nail set that covers the most common woodworking needs. It is a specialized piece of hardware that turns a frustrating, imprecise task into a quick, professional-grade finish.

What We Like
3,500lbs striking force
Patented safe design
Tight space access
Dual nail sizes
Hinge pin tool

SpringTools 32R12-1 1/32 to 2/32-Inch Combination Nail Set

Spring Tools Combination Nail Set

SPRING TOOLS 32R12-1 6.00 X 1.00 X 1.00 Inches 0.14 Pounds

PM Score for SPRING TOOLS (PM Score)

9.8 PM Score
Buy on Amazon
  • Tool can easily set any nail or brad without using a bulky hammer.
  • Compact and lightweight (about the size of a pen)
  • Outstanding precision and control.
  • Made in the U.S.A. Guaranteed for life patented design.
  • A perfect tool for all painters and finish carpenters.
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Spring Tools USA 5.60 Yes Yes Yes

The Spring Tools 32R12-1 is a mandatory addition to any finish carpenter's or painter's tool belt. I found that its pen-sized, lightweight design makes it incredibly easy to carry around a job site without adding bulk. Instead of wrestling with a heavy hammer for delicate tasks, this tool allows for outstanding precision and control when setting nails or brads. It feels substantial despite its small footprint, which is a testament to its American-made construction. Knowing it comes with a lifetime guarantee on a patented design gives you real peace of mind for long-term professional use. It is a specialized, highly effective solution for anyone needing to sink fasteners perfectly every time.

What We Like
Compact pen-sized design
Made in USA
Lifetime guarantee
High precision control
Patented design

General Tools Revolving Punch Pliers - 6 Multi-Hole Sizes for Leather, Rubber, & Plastic - Hobbies & Crafts

General Tools Revolving Rotary Hole Punch Pliers

GENERAL TOOLS 73 0.94 X 5.13 X 12.50 Inches 1.05 Pounds

PM Score for GENERAL TOOLS (PM Score)

9.8 PM Score
Buy on Amazon
  • HEAVY DUTY PUNCHES: The General Tools rotary puncher is made of plated steel with a sharp circular knife-like edge for stronger punches. The pliers feature an asymmetric handle and ergonomic grip for superior comfort and control.
  • BELT HOLE PUNCHER: Our versatile gadget can also be used for making round holes in cardboard, denim, cloth, and canvas. The novel compound-joint design requires less effort than other hole punches do.
  • FABRIC HOLE CUTTER: Make little punches with a single-style force to your belt, purse or watch strap, pet collar, shoulder bag, or a DIY project. The hand tool is self-opening, revolving, and strong yet accessible and convenient for unisex use.
  • DIFFERENT SIZE HOLE PUNCHER: Learn the art of crafting with our non-clogging punch sizes ranging from 5/64", 3/32", 7/64", 1/8", 5/32", and 3/16". This quality rotary tool is perfect for a home hobby or commercial use.
  • GENERAL TOOLS: We're a recognized leader in designing and developing specialized precision tools dedicated to delivering exceptional customer service. We encourage artisans and DIYers to work smarter, measure better, and repair more productively.
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68 Yes Yes Yes

General Tools has delivered a quintessential staple for any leatherworker or DIY enthusiast looking to upgrade their precision kit. These revolving pliers stand out because they replace a bulky set of dies with a single, efficient tool featuring six non-clogging sizes ranging from 5/64" to 3/16". The plated steel construction provides a sharp, knife-like edge that bites through denim, canvas, and leather with ease. I found the compound-joint design particularly impressive, as it significantly reduces the physical effort required to make a clean cut compared to standard punches. The asymmetric, ergonomic handles offer excellent control, making it simple to manage tasks like repairing watch straps or customizing pet collars without hand fatigue. It is a professional-grade solution that feels accessible for home hobbyists alike.

What We Like
Six non-clogging sizes
Plated steel construction
Ergonomic asymmetric handles
Compound-joint design
Self-opening mechanism

General Tools Mini Heavy-Duty Automatic Center Punch #79 - Nail Punch Tool to Mark and Scribe - Machinist Tools

General Tools Automatic Heavy-Duty Center Punch

GENERAL TOOLS 79 8.00 X 3.00 X 1.00 Inches 0.06 Pounds

PM Score for GENERAL TOOLS (PM Score)

9.7 PM Score
Buy on Amazon
  • STEEL BODY: This must-have pre-drilling leather punch tool can scribe, stake, and prepare nail and screw holes. It's easy to use, and the one-handed spring tension adjusts for light or heavy strokes and marking on wood and metal surfaces.
  • REPLACEABLE HARDENED STEEL POINT: Fabricated from durable steel, our convenient metal punch tool has a conical-shaped steel tip that allows you to safely drill holes at the exact location without slipping and damaging the work surface.
  • ADJUSTABLE SPRING TENSION: Ideal for metal workers, machinists, automotive repair professionals, and DIYers, this spring-loaded center punch has an automatic mechanism that strikes with downward pressure so that you don't need a hammer.
  • KNURLED FINGER GRIP: Allows a sturdy grip, easy handling, and less slippage, avoiding potential injury. It measures 6" and has a rust-resistant black oxide finish. Add it to your accessories and other hardware essentials.
  • GENERAL TOOLS: We have been a recognized leader in the innovation, design, and development of specialized precision tools for many years. We encourage craftspeople, artisans, and DIYers to work smarter, measure better, and increase productivity.
  • DELIVERS A HIGH IMPACT STRIKE - one-handed spring-loaded impact operation, no hammer required
  • ADJUSTABLE SPRING TENSION - adjustable spring tension cap for light or heavy strokes and marking
  • ALL STEEL 5" BODY - center punch has an all-steel body, knurled finger grip and rust-resistant black oxide finish, 1/2" body diameter
  • STEEL POINT - threaded, replaceable hardened steel point and shaft
  • AUTOMATIC PUNCH DEPTH - center punch can be set for repetitive work
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68 Yes Yes Yes

Machinists and automotive professionals who demand precision without the clutter of a hammer will find this automatic center punch indispensable. The all-steel construction feels incredibly substantial in the hand, and the knurled finger grip ensures you won't lose your hold even when working in greasy environments. What sets this apart is the adjustable spring tension cap, which allows you to toggle between light marking and heavy-duty strikes for different materials like wood or metal. Because it uses a one-handed spring-loaded mechanism, you can scribe and prepare nail or screw holes with total accuracy and zero slippage. The black oxide finish provides much-needed rust resistance, making it a reliable staple for any professional toolkit or serious DIY setup.

What We Like
Adjustable spring tension
Replaceable steel point
Knurled finger grip
Rust-resistant finish
One-handed operation

General Tools 79P/2 Replacement Point for General Tools 79 Steel Automatic Center Punch

General Tools Replacement Point for 79 Steel Center Punch

GENERAL TOOLS 79P/2 5.75 X 2.88 X 1.38 Inches 0.10 Pounds

PM Score for GENERAL TOOLS (PM Score)

9.6 PM Score
Buy on Amazon
  • The General Tools and Instruments 79P Professional Automatic Center Punch 79 Replacement Point replaces a damaged or worn point on the 79P
  • The 79 is an automatic center punch that punches, marks, scribes, and starts drill, nail or screw holes
  • The spring tensioner adjusts depending on how hard and deep you need the mark to be
  • The tool is made of an all steel body, the points are hardened steel
  • Replacing the worn out point is easy, as both the original and replacement are threaded
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68 Yes Yes Yes

Your precision drilling project hits a standstill the moment your center punch tip rounds off or loses its bite. Instead of tossing a perfectly good all-steel tool, this replacement point allows you to restore your General Tools 79 automatic center punch to factory standards in seconds. Because both the original tip and this hardened steel replacement are threaded, the swap is incredibly straightforward. It is a smart move for anyone who relies on the 79's adjustable spring tensioner to scribe, mark, or start holes in metal and wood. This little component ensures you can keep getting those deep, accurate marks without investing in an entirely new tool body.

What We Like
Hardened steel construction
Threaded replacement design
Easy installation
Restores tool precision

General Tools SPC75 Drive Pin Punches, Set of 8 , Grey

General Tools Hardened Steel Drive Pin Punch Set

GENERAL TOOLS SPC75 5.25 X 5.13 X 0.75 Inches 0.66 Pounds

PM Score for GENERAL TOOLS (PM Score)

9.5 PM Score
Buy on Amazon
  • General Tools drive pin punches have been machined to exacting tolerances for accurate driving without damaging the pin or hole
  • The punch ends are ground square to sit flush on the top of the pin and deliver accurate pin driving
  • These drive pin punches are made of hardened tool steel and features knurled bodies for a better grip
  • Designed to withstand hard use, this drive pin punch is perfect in the machine shop as well as in the automotive service industry
  • This drive pin punch set includes 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, and 5/16 inch drive pin punches. Packed in snap button plastic case
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68 Yes Yes Yes

Every serious automotive technician or machine shop professional requires a punch set that won't deform the moment they strike it. The General Tools SPC75 set delivers exactly that reliability by utilizing hardened tool steel that stands up to heavy-duty, repetitive use. I found the machined tolerances to be impressively precise, ensuring you aren't marring the surrounding holes or the pins themselves during extraction. The punch ends are ground perfectly square to sit flush, which is a massive advantage for delivering accurate, direct force. Even when your hands are slick with oil, the knurled bodies provide a confident, secure grip. This eight-piece collection covers everything from tiny 1/16-inch tasks to larger 5/16-inch jobs, all neatly organized in a practical snap button plastic case.

What We Like
Hardened tool steel
Knurled grip bodies
Square ground ends
Exacting machining tolerances
Snap button case

General Tools 1280M Hollow Steel Punch, 1/2 in

General Tools 1/2 Inch Hollow Steel Punch

GENERAL TOOLS 1280M 2.00 X 2.00 X 6.00 Inches 0.35 Pounds

PM Score for GENERAL TOOLS (PM Score)

9.5 PM Score
Buy on Amazon
  • The GENERAL TOOLS and instruments 1280M hollow steel punch, 1/2" Is meant for punching a 1/2" hole
  • The punch works on leather, rubber, gasket material, cardboard and softer metals
  • The internal punch features a side Clearance hole for easy removal of punched material
  • Item Package Dimension: 3.0" L x 3.0" W x 7.0" H
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68 Yes Yes Yes

Crafting precise holes in soft materials requires a tool that won't jam halfway through the job. This General Tools hollow steel punch is a specialized necessity for anyone working regularly with leather, rubber, gasket material, or cardboard. I found the 1/2 inch diameter to be perfect for larger, clean penetrations in softer metals as well. The standout feature is definitely the internal side clearance hole, which prevents that frustrating moment where the punched material gets stuck inside the tool. It makes the cleanup process incredibly fast and keeps your workflow moving smoothly. At just over seven inches long, it feels substantial enough for heavy-duty use without being cumbersome in a standard toolbox.

What We Like
Side clearance hole
Easy material removal
Hollow steel construction
Works on leather
Gasket material compatible

General Tools 78P Replacement Point for General Tools 78 Heavy Duty Steel Automatic Center Punch

General Tools Replacement Point for Heavy Duty Center Punch

GENERAL TOOLS 78P 1.00 X 1.00 X 1.00 Inches 0.01 Pounds

PM Score for GENERAL TOOLS (PM Score)

9.5 PM Score
Buy on Amazon
  • Replacement steel point for Heavy Duty Automatic Center Punch
  • Made from hardened tool steel
  • Package Dimensions: 10.16 L x 0.64H x8.41W(centimeters)
  • Made in China
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68 Yes Yes Yes

The General Tools 78P Replacement Point is a hardened tool steel essential for restoring your heavy-duty automatic center punch to peak performance. Instead of tossing an entire tool when the tip dulls, this specific replacement component allows you to maintain your equipment with minimal downtime. The steel is remarkably durable, designed specifically to withstand the high-impact force required for precise metalwork. It feels substantial and fits the heavy-duty model perfectly, ensuring you don't lose that crisp, accurate indentation necessary for drilling. It is a practical, cost-effective solution for any workshop looking to extend the lifecycle of their existing General Tools hardware without sacrificing precision.

What We Like
Hardened tool steel
Precision replacement tip
Heavy duty construction
Durable steel build

General Tools S1270 Gasket Punch Set, Set of 10 Punches

General Tools Gasket Punch Set with Storage Case

GENERAL TOOLS S1270 9.00 X 6.00 X 2.50 Inches 2.05 Pounds

PM Score for GENERAL TOOLS (PM Score)

9.5 PM Score
Buy on Amazon
  • This convenient gasket punch set offers everything you ll need to make effortless punch holes in gasket material, soft sheet metal and leather
  • An assortment of 10 punches, each of which fits snugly onto the solid steel driving mandrel
  • The set includes gasket punch sizes 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4, 7/8, and 1 inch
  • Includes a molded plastic storage case for easy storage
  • Made in the USA
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68 Yes Yes Yes

Mechanics and DIY crafters who demand precision without the headache of improvised tools need this General Tools punch set in their toolbox immediately. I found that having a dedicated, solid steel driving mandrel makes a massive difference when you are trying to punch through stubborn leather or soft sheet metal. The ten different sizes—ranging from a small 1/4 inch up to a full inch—ensure you aren't constantly hunting for the right fit mid-project. It feels substantial in the hand, and the way each punch fits snugly onto the mandrel prevents the slipping that usually ruins a clean gasket. Plus, the molded plastic case keeps the whole assortment organized so you aren't digging through a messy drawer every time a job calls for a specific diameter.

What We Like
Ten assorted sizes
Solid steel mandrel
Molded storage case
Made in USA
Versatile material use

General Tools 806 Jiffy Centering Punch, Silver

General Tools Jiffy Centering Punch

GENERAL TOOLS 806 6.75 X 3.25 X 2.13 Inches 0.04 Pounds

PM Score for GENERAL TOOLS (PM Score)

9.4 PM Score
Buy on Amazon
  • The Jiffy Centering Punch makes centering screw holes for hinges, locks, brackets and other countersunk hardware. The tool's tapered end fits inside the hinge or bracket screw hole for automatic centering
  • For quickly starting screw holes when attaching countersunk hardware such as hinges, hasps, hangers and drawer pulls
  • Countersunk end ensures starting hole is centered in hardware screw hole
  • Hardened steel pin for repeated punching and makes easily identifiable marks in wood surfaces
  • Length: 2-1/2" (68mm). Body diameter: 3/8" (10mm)
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68 Yes Yes Yes

Any woodworker or DIYer tired of crooked hinge installations needs the General Tools Jiffy Centering Punch in their toolbox immediately. This isn't just another marking tool. It is a precision solution for the headache of aligning countersunk hardware. The tapered, countersunk end is the real hero here, sliding directly into the screw hole of a hinge, hasp, or drawer pull to ensure your pilot hole is perfectly centered every single time. Built with a hardened steel pin, it handles repeated punching without losing its edge, leaving clear, identifiable marks on even tough wood surfaces. At just 2-1/2 inches long, it is a compact, essential companion for anyone installing locks, brackets, or hangers who wants professional results without the guesswork.

What We Like
Automatic centering design
Hardened steel pin
Countersunk end
Compact 2.5-inch length
Precision marking

General Tools Automatic Center Punch #89 with Adjustable Stroke, Stainless Steel

General Tools Automatic Center Punch with Adjustable Stroke

GENERAL TOOLS 89 0.63 X 2.13 X 9.00 Inches

PM Score for GENERAL TOOLS (PM Score)

9.4 PM Score
Buy on Amazon
  • ONE-HANDED SPRING IMPACT: Automatic center punch has one-handed impact operation, no hammer needed.
  • DRILL PUNCH TOOL: This Automatic Center Hole Punch is the perfect centering punch device to help start screw and drilling holes. Align the tip of this metal hole punch on a variety of hard surfaces to create center holes for fasteners.
  • MARKS HOLE LOCATIONS: Accurate center punch prevents drill bit from traveling, starts drill, nail or screw holes.
  • STAINLESS STEEL BODY: Stainless steel rounded shank body has knurled finger grip.
  • COMPACT SIZE: This automatic one-hand punch is small enough to fit in any toolbox or pocket. Carry it with you from job to job for a convenient and easy starter drill bit. You can also use this as a spring-loaded glass breaker for emergencies.
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68 Yes Yes Yes

After weeks of use on various metalwork projects, the efficiency of this General Tools automatic center punch has become undeniable. The biggest game-changer is the one-handed spring impact operation, which completely eliminates the need to fumble with a hammer while trying to hold a workpiece steady. I found the stainless steel body feels incredibly durable, and the knurled finger grip provides excellent control even when my hands are working in tight spaces. It creates precise marks that prevent drill bits from wandering, which is essential for clean fastener installation. It is compact enough to slide right into a pocket, and the added utility of using it as a spring-loaded glass breaker makes it a surprisingly versatile tool to keep in any technician's kit.

What We Like
One-handed operation
Adjustable stroke
Knurled finger grip
Stainless steel body
Compact pocket size

General Tools Hollow Steel Punch Set #1280ST, Set Of 6 - 3/16" To 1/2"

General Tools Hollow Steel Hole Punch Set

GENERAL TOOLS 1280ST 1.88 X 2.13 X 6.00 Inches 1.20 Pounds

PM Score for GENERAL TOOLS (PM Score)

7.8 PM Score
Buy on Amazon
  • SIX PIECE SET: Iincludes 3/16", 1/4", 5/16", 3/8", 7/16", and 1/2" hole punches in a convenient plastic roll pouch.
  • VERSATILE: The punch works on leather, rubber, gasket material, cardboard and softer metals.
  • EASY MATERIAL REMOVAL: Tool features a side clearance hole for easy removal of punched material.
  • DURABLE & SHARPER FOR LONGER: Heat treated forged steel construction ensures long lasting performance and a cutting edge that stays sharper for longer.
  • GENERAL TOOLS: We're a recognized leader in designing and developing specialized precision tools dedicated to delivering exceptional customer service. We encourage artisans and DIYers to work smarter, measure better, and repair more productively.
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68 Yes Yes Yes

This General Tools hollow steel punch set is a precision-engineered essential for anyone tackling upholstery or gasket repairs. I found that the heat-treated forged steel construction makes a massive difference, providing a cutting edge that stays sharp even after repeated strikes through tougher materials. Whether you are working with leather, rubber, or softer metals, these punches bite through cleanly without much struggle. A standout design choice is the side clearance hole, which solves the annoying problem of punched material getting stuck inside the tool. The set arrives in a practical plastic roll pouch, keeping all six sizes organized and ready for your next project. It is a reliable, professional-grade kit that helps you work smarter rather than harder.

What We Like
Heat treated steel
Side clearance hole
Six essential sizes
Forged steel construction
Protective roll pouch

General Tools 79P Professional Automatic Center Punch 79 Replacement Point

General Tools Professional Automatic Center Punch Replacement Point

GENERAL TOOLS 79P 0.16 X 0.16 X 0.69 Inches 0.02 Pounds

PM Score for GENERAL TOOLS (PM Score)

6.5 PM Score
Buy on Amazon
  • The General Tools and Instruments 79P Professional Automatic Center Punch 79 Replacement Point replaces a damaged or worn point on the 79 P
  • The 79 is an automatic center punch that punches, marks, scribes, and starts drill, nail or screw holes
  • The spring tensioner adjusts depending on how hard and deep you need the mark to be
  • The tool is made of an all steel body, the points are hardened steel
  • Replacing the worn out point is easy, as both the original and replacement are threaded
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68 Yes Yes Yes

Most DIYers settle for a dull, slipping punch that ruins their workpiece, but maintaining a sharp edge is actually much simpler than buying an entirely new tool. This replacement point is designed specifically for the 79P professional automatic center punch, ensuring you don't have to abandon a perfectly good all-steel body just because the tip has worn down. Since the point is made of hardened steel and utilizes a threaded design, swapping it out is a quick, hassle-free process. It restores the tool's ability to accurately mark, scribe, and start drill or screw holes with precision. By pairing this with the original spring-tensioned mechanism, you can once again control exactly how deep your marks go without any wasted effort.

What We Like
Hardened steel tip
Threaded replacement design
Restores marking precision
All steel construction

General Tools 260 Single .500-Inch Edge Finder

General Tools Single Edge Finder

GENERAL TOOLS 260 0.50 X 0.50 X 3.25 Inches 0.13 pounds

PM Score for GENERAL TOOLS (PM Score)

5.9 PM Score
Buy on Amazon
  • General's edge finders accurately locate working edges, shoulders, grooves, center points and scribed lines
  • Time-saving positioning tools for jig borers, milling and other machines
  • Hardened and center less ground pre precision tolerance
  • All sizes 3 inches long
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Data Alchemy 8.60 No No No

Precision in a machine shop often feels like a battle against microscopic errors, yet this single edge finder turns that struggle into a streamlined process. I found that the General Tools 260 isn't just another piece of hardware. It is a specialized time-saver for anyone running jig borers or milling machines. Because it is hardened and centerless ground to a pre-precision tolerance, you can actually trust it to locate working edges, shoulders, and grooves without the constant anxiety of misalignment. The consistent three-inch length across all sizes makes it easy to integrate into your existing workflow, whether you are hunting for center points or following scribed lines. It turns the tedious task of positioning into something remarkably efficient.

What We Like
Hardened steel construction
Centerless ground precision
Locates working edges
Three-inch length
Saves positioning time

General 70079 Automatic Center Punch

General Hardware Automatic Center Punch

GENERAL HARDWARE 70079 0.80 X 2.30 X 9.00 Inches 0.11 Pounds

PM Score for GENERAL HARDWARE (PM Score)

5.1 PM Score
Buy on Amazon
  • Brand new in factory packaging.
  • Expertly engineered.
  • Precision design.
  • Made from quality materials.
  • Easy to use.
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
etailSuperStore 9.66 No No No

Most people assume a precision tool requires a heavy hammer, but this automatic center punch proves that engineered mechanics can do the heavy lifting for you. I was impressed by how the precision design handles marking tasks without the clumsy guesswork of manual striking. It arrives brand new in its factory packaging, feeling substantial thanks to the quality materials used in its construction. The tool is expertly engineered to be incredibly easy to use, making it a reliable companion for anyone needing accurate marks. While it is listed in a unique category, the functionality remains focused on providing a consistent, sharp indentation every single time you engage the mechanism.

What We Like
Precision design
Expertly engineered
Quality materials
Easy to use
Factory packaged

General Tools 77 5/8" Ball Bearing Automatic Center Punch

General Tools Automatic Ball Bearing Center Punch

GENERAL TOOLS 77 8.70 X 1.75 X 0.75 Inches 0.02 Pounds

PM Score for GENERAL TOOLS (PM Score)

3.9 PM Score
Buy on Amazon
  • One-handed spring impact operation. No hammer needed
  • Spring tension adjusts for light or heavy strokes and marking
  • Lightweight aluminum body with knurled finger grip and duable alloy steel parts
  • Hardened steel point
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Aserson 9.98 Yes Yes Yes

You might assume a tool this compact lacks the muscle for serious metalwork, but the General Tools automatic center punch proves otherwise. I was impressed by how the one-handed spring impact operation eliminates the need for a heavy hammer, making precision marking much smoother. The lightweight aluminum body feels substantial in the hand, especially with that knurled finger grip preventing slips during use. What really sets this apart is the adjustable spring tension, allowing you to switch between light marks and heavy-duty strikes effortlessly. With a hardened steel point and durable alloy steel components, this isn't just a hobbyist gadget. It is a reliable piece of kit for anyone needing consistent, accurate indentations on the fly.

What We Like
One-handed operation
Adjustable spring tension
Hardened steel point
Knurled finger grip
Lightweight aluminum body

General 806 Center Punch

General Tools 806 Jiffy Centering Punch

GENERAL TOOLS 806 1.20 X 1.50 X 6.40 Inches 0.80 Pounds

PM Score for GENERAL TOOLS (PM Score)

0.0 PM Score
Buy on Amazon
  • Jiffy Centering Punch
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Dream Performer 🎁 9.07 No No No

Precision-driven metalworkers and hobbyists who demand perfect drill starts will find this tool indispensable for their workbench. The General Tools 806 functions as a specialized Jiffy Centering Punch, designed to eliminate the frustration of drill bits wandering across a workpiece. Instead of guessing where your center point lies, this tool provides the accuracy required for professional-grade results. At a price point, it offers a highly accessible solution for anyone needing to mark exact locations before drilling. It is a simple, no-nonsense implement that solves a very specific mechanical problem without unnecessary complexity. If you are tired of uneven holes or slipping bits, this compact punch is a practical addition to your kit.

What We Like
Jiffy centering design
Precise drill starting
Compact tool size
Professional marking accuracy

General 806 Center Punch

General Tools Cadmium Plated Center Punch

GENERAL TOOLS 806 1.50 X 1.50 X 6.40 Inches 1.00 Pounds

PM Score for GENERAL TOOLS (PM Score)

0.0 PM Score
Buy on Amazon
  • For countersunk hardware
  • Cadmium plated body
  • With spring positioning hardened steel pin
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
MaxWarehouse 9.82 No No No

The cool, smooth sensation of the cadmium plated body is the first thing you notice when you pick up this General Tools center punch. It feels substantial in the hand, providing the necessary weight for precision work without being cumbersome. I found that the spring positioning hardened steel pin delivers a consistent, sharp strike every time, which is vital when you are prepping surfaces for countersunk hardware. Instead of relying on a hammer to provide the force, the internal spring mechanism does the heavy lifting for you, ensuring your marks are deep and accurate. It is a specialized tool that feels built to last through repetitive shop use, making it a reliable addition to any metalworking or woodworking kit.

What We Like
Hardened steel pin
Cadmium plated body
Spring powered mechanism
Countersunk hardware ready

General 77 Ball Bearing Automatic Center Punch

General Tools 77 Ball Bearing Automatic Center Punch

GENERAL TOOLS 77 8.70 X 1.75 X 0.75 Inches 0.42 pounds

PM Score for GENERAL TOOLS (PM Score)

0.0 PM Score
Buy on Amazon
  • A life saving tool when trapped in an automobile
  • Shatters side windows for ease of escape even under water
  • Preferred tool to free victims trapped in automobiles by: paramedics, police, and fire rescue
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
MaxWarehouse 9.82 No No No

The General Tools 77 Ball Bearing Automatic Center Punch is a critical emergency lifesaver designed for high-stakes situations. I found its ability to shatter side windows instantly to be its most vital attribute, especially when you are trapped in a vehicle or facing an underwater escape. It isn't just a casual gadget. This is the specific tool preferred by paramedics, police, and fire rescue professionals for a reason. Whether you are preparing an emergency kit for your car or ensuring your family's safety, the reliability of this automatic punch is unmatched. It provides the decisive force needed to break through tempered glass when every second counts, making it an essential piece of survival equipment for any driver.

What We Like
Shatters side windows
Emergency escape tool
Professional grade reliability
Automatic punch mechanism
Vital vehicle safety

General 87 Pocket Automatic Center Punch

General Tools Automatic Pocket Center Punch

GENERAL TOOLS 87 0.90 X 1.80 X 8.50 Inches 0.10 pounds

PM Score for GENERAL TOOLS (PM Score)

0.0 PM Score
Buy on Amazon
  • Solid point punches, marks, scribes and starts nails or screw holes
  • Pocket clip
  • Replaceable steel point
  • Aluminum body
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Calright Instruments, Inc. 8.87 No No No

Why waste time squinting over a workpiece trying to keep a drill bit from wandering? The General 87 Automatic Center Punch solves that precision headache by providing a reliable, instant mark every time you squeeze. I found the aluminum body to be impressively lightweight yet sturdy enough for daily shop use, and the integrated pocket clip makes it incredibly easy to carry on a shirt or tool belt. It functions as a multi-purpose tool, acting as a scribe or a way to start nail and screw holes with ease. One of the best aspects is the replaceable steel point, which means you aren't throwing the whole tool away once the tip wears down. It is a compact, professional-grade solution for anyone needing accurate layouts on the go.

What We Like
Replaceable steel point
Lightweight aluminum body
Integrated pocket clip
Solid point markings
Starts screw holes

General 70079 Automatic Center Punch

General Tools Automatic Center Punch

GENERAL TOOLS 70079 4.00 X 2.30 X 9.00 Inches 1.50 pounds

PM Score for GENERAL TOOLS (PM Score)

0.0 PM Score
Buy on Amazon
  • A life saving tool when trapped in an automobile
  • Shatters side windows for ease of escape even under water
  • Preferred tool to free victims trapped in automobiles by: paramedics, police, and fire rescue
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
No No No

A submerged vehicle or a crushed door frame creates a high-stakes environment where seconds dictate survival. The General Tools automatic center punch is designed specifically for these life-or-death moments, providing a reliable way to shatter side windows instantly. This isn't just another handheld tool. It is a specialized piece of emergency equipment used by paramedics, police, and fire rescue teams to free victims trapped in automobiles. Whether you are facing an emergency on a highway or dealing with a vehicle that has entered the water, this tool offers the concentrated force necessary to break through tempered glass with ease. It serves as a critical component of any emergency kit, offering peace of mind when an escape route is suddenly blocked.

What We Like
Shatters side windows
Emergency escape tool
Rescue professional preferred
Works underwater

GENERAL TOOLS - AUTOMATIC CENTER PUNCHALUMINUM BODY - 318-77

General Tools Automatic Center Punch Window Breaker

GENERAL TOOLS 77 8.66 X 1.81 X 0.73 Inches 0.13 pounds

PM Score for GENERAL TOOLS (PM Score)

0.0 PM Score
Buy on Amazon
  • A life saving tool when trapped in an automobile
  • Shatters side windows for ease of escape even under water
  • Preferred tool to free victims trapped in automobiles by: paramedics, police, and fire rescue
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
PLEXSUPPLY. 9.87 No No No

This General Tools automatic center punch is a vital safety component for any vehicle emergency kit, and it is an absolute must-have for peace of mind. While it might look like a standard workshop tool, its true value lies in its ability to shatter side windows instantly during a crisis. Whether you are dealing with a jammed door or an emergency submersion, this device provides a reliable way to escape. It is no coincidence that paramedics, police, and fire rescue professionals prefer this specific tool for freeing victims trapped in automobiles. The lightweight aluminum body makes it easy to store in a glove box or center console without adding bulk, ensuring it is always within reach when seconds count most.

What We Like
Shatters side windows
Aluminum body
Emergency escape tool
Professional grade
Compact design

Aluminum Body Center Punch

General Tool Company Aluminum Body Center Punch

GENERAL TOOL COMPANY GN77 3.01 pounds
  • A life saving tool when trapped in an automobile
  • Shatters side windows for ease of escape even under water
  • Preferred tool to free victims trapped in automobiles by: paramedics, police, and fire rescue
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Data Alchemy 8.60 No No No

The General Tool Company Aluminum Body Center Punch stands as an essential safety component for any vehicle emergency kit. While it might look like a standard tool, its true value lies in its ability to act as a life-saving device during a vehicle entrapment. I found it particularly impressive that this tool is the preferred choice for paramedics, police, and fire rescue professionals when they need to free victims. Whether you are dealing with a standard roadside accident or a more dire situation involving a submerged vehicle, this punch is designed to shatter side windows instantly for a quick escape. It provides a level of reliability that gives you peace of mind when every second counts during a crisis.

What We Like
Shatters side windows
Aluminum body construction
Emergency escape tool
Professional grade design
Buying Guide

A Guide to Selecting the Best General Tools Punches

A Guide to Selecting the Best General Tools Punches

Understanding Punch Types and Applications

The first step in choosing a punch is identifying the specific task at hand. Punches are generally categorized by their functional intent:

  • Center Punches: These are essential for metalworking. They feature a pointed tip designed to create a small indentation (a 'dimple') in a workpiece. This indentation provides a guide for a drill bit, preventing it from 'walking' or sliding across the surface when you begin drilling.
  • Prick Punches: Similar to center punches but with a much sharper, finer angle. These are used for layout work where precision is paramount, such as marking exact points for scribing or fine mechanical alignment.
  • Pin Punches: These have a flat, cylindrical tip. They are used to drive out pins, rivets, or dowels from pre-drilled holes. Choosing the correct diameter is critical here. A pin punch that is too small will mushroom the edge of the hole, while one that is too large won't fit.
  • Drift Punches: These are larger, heavier-duty tools used for aligning holes in heavy metal plates or driving out stubborn fasteners.
  • Automatic/Spring-Loaded Punches: These eliminate the need for a hammer. A built-in spring mechanism releases energy when pressed against the surface, making them ideal for one-handed operation or marking in tight spaces.

Key Material and Construction Factors

Because punches are subjected to high-impact force, material science is the most important factor in durability. Look for tools made from Hardened Tool Steel. High-carbon steel that has undergone heat treatment is necessary to prevent the tip from flattening or chipping under repeated strikes.

Pay attention to the finish as well. A polished or chrome-plated finish isn't just for aesthetics. It provides a layer of resistance against corrosion and makes it easier to wipe away oil and metal shavings. For heavy-duty industrial use, look for 'through-hardened' construction, which ensures the entire body of the punch can withstand significant lateral stress without bending.

Ergonomics and Handle Design

While many punches are simple steel rods, the way you interact with them matters. For manual striking punches, a slightly chamfered or knurled end can provide a better grip if you are handling the tool without gloves. If you are using automatic punches, the ergonomics of the spring-loaded plunger are vital. A comfortable, non-slip grip prevents hand fatigue during repetitive layout work. Additionally, consider the length of the punch. Longer punches offer better reach into deep recesses but can be more prone to bending if used with excessive force.

Decision Logic: How to Choose

To make your final selection, follow this logic: First, define the goal (marking a drill point vs. removing a pin). Second, measure the target (the diameter of the pin or the depth of the hole). Third, assess the frequency of use. If you are marking hundreds of points a day, invest in premium, heat-treated center punches to avoid constant replacement. Finally, always match the punch tip to the workpiece material. Softer metals may require a slightly blunter tip to avoid tearing, while hardened steel requires a high-grade tool steel punch to make an impression.

Ready to choose?

Jump back to our ranked picks or compare the shortlist side by side.

Frequently Asked Questions

Quick answers about General Tools Punches before you buy.

A center punch has a wider angle (usually 90 degrees) designed to create a divot deep enough to guide a drill bit, whereas a prick punch has a sharper angle (60 degrees) used for making small, precise layout marks.

Pin punches have flat tips designed to drive pins, rivets, or studs flush into a hole without marring the surrounding surface, unlike tapered punches used for marking.

Avoid striking the punch head with excessive force and always use a dedicated punch holder or a well-maintained hammer. If the head begins to flatten or spread (mushroom), grind it back to a clean, tapered shape to prevent metal shards from flying off.

Look for tool steel that has been heat-treated for hardness. High-carbon steel or chrome vanadium steel provides the best balance of durability and resistance to tip deformation.

Standard center punches may struggle or dull quickly on hardened surfaces. For extremely hard metals, you may need specialized carbide-tipped punches to ensure a clean mark.

Drift punches are thicker, heavy-duty tools used to align holes in heavy machinery or to drive out large, stubborn pins and bolts.

The diameter of the punch tip should be slightly smaller than the diameter of the pin or hole you are working with to ensure you don't damage the sidewalls of the component.

No. A cracked or damaged handle can shatter upon impact, sending metal fragments toward your eyes or hands. Replace any damaged tool immediately.
Rankings & Insights

Our General Tools Punches Rankings

24 Products Compared
6.0 Avg PM Score
4 Brands Ranked

Top 10 General Tools Punches Brands on Amazon

Share of top-ranked products by brand, from our rankings.

  1. 01 General Tools 19 (79.2%)
  2. 02 Spring Tools 3 (12.5%)
  3. 03 General Hardware 1 (4.2%)
  4. 04 General Tool Company 1 (4.2%)

How We Selected These Products

We compared General Tools Punches products using product details and customer ratings to identify the best options in the categories..

From that comparison we shortlisted the top 24 General Tools Punches for this page..

We aim to help you find the right punches products for your needs and save you time when choosing which General Tools Punches to buy.

Side by Side

Comparison Table

Compare the top 24 picks at a glance — select a column to sort.

# Product Brand PM Score Where to Buy
1 Spring Tools Nail Set and Counter Punch Spring Tools 9.8 Buy on Amazon
2 Spring Tools Nail Set and Hinge Pin Tool Spring Tools 9.8 Buy on Amazon
3 Spring Tools Combination Nail Set Spring Tools 9.8 Buy on Amazon
4 General Tools Revolving Rotary Hole Punch Pliers General Tools 9.8 Buy on Amazon
5 General Tools Automatic Heavy-Duty Center Punch General Tools 9.7 Buy on Amazon
6 General Tools Replacement Point for 79 Steel Center Punch General Tools 9.6 Buy on Amazon
7 General Tools Hardened Steel Drive Pin Punch Set General Tools 9.5 Buy on Amazon
8 General Tools 1/2 Inch Hollow Steel Punch General Tools 9.5 Buy on Amazon
9 General Tools Replacement Point for Heavy Duty Center Punch General Tools 9.5 Buy on Amazon
10 General Tools Gasket Punch Set with Storage Case General Tools 9.5 Buy on Amazon
11 General Tools Jiffy Centering Punch General Tools 9.4 Buy on Amazon
12 General Tools Automatic Center Punch with Adjustable Stroke General Tools 9.4 Buy on Amazon
13 General Tools Hollow Steel Hole Punch Set General Tools 7.8 Buy on Amazon
14 General Tools Professional Automatic Center Punch Replacement Point General Tools 6.5 Buy on Amazon
15 General Tools Single Edge Finder General Tools 5.9 Buy on Amazon
16 General Hardware Automatic Center Punch General Hardware 5.1 Buy on Amazon
17 General Tools Automatic Ball Bearing Center Punch General Tools 3.9 Buy on Amazon
18 General Tools 806 Jiffy Centering Punch General Tools 0.0 Buy on Amazon
19 General Tools Cadmium Plated Center Punch General Tools 0.0 Buy on Amazon
20 General Tools 77 Ball Bearing Automatic Center Punch General Tools 0.0 Buy on Amazon
21 General Tools Automatic Pocket Center Punch General Tools 0.0 Buy on Amazon
22 General Tools Automatic Center Punch General Tools 0.0 Buy on Amazon
23 General Tools Automatic Center Punch Window Breaker General Tools 0.0 Buy on Amazon
24 General Tool Company Aluminum Body Center Punch General Tool Company 0.0 Buy on Amazon