PickSmartly Buying Guide

Best Felt Roofing Nails in 2026

9.7 PM Score
Products Compared
8
Brands Ranked
6
Our guides are compiled from product information and customer ratings. If you click on links we provide, we may receive compensation.

When it comes to protecting a structure from the elements, the integrity of your roofing system is only as strong as its smallest components. Felt roofing nails might seem like a minor detail, but they are the critical anchors that prevent wind uplift and water infiltration. Choosing the wrong fastener can lead to premature roofing failure, rust streaks, or even the complete detachment of the felt layers during a storm. A high-quality felt roofing nail is engineered not just to hold, but to resist the constant cycle of expansion, contraction, and moisture exposure inherent in roofing work.

Editor's Choice

Our Top Picks for Felt Roofing Nails

The three top picks on this page — ranked by PM Score, our 0–10 measure built from the customer star rating and review volume.

Yost Plastics - Plastic Cap Washers, Use with Nails or Screws, 500 Qty, 1-1/8" Made in The USA

Yost Plastics Plastic Cap Washers for Fasteners

YOST PLASTICS 118202194

PM Score for YOST PLASTICS (PM Score)

9.7 PM Score
Buy on Amazon
  • Good for Radiant & Vapor Barriers, Roofing felt, Sheeting, Rigid Board Insulation, and House Wrap
  • 500 QTY
  • Use with #6 & #8 Screws
  • Use with #11 & #12 Nails
  • PROUDLY DESIGNED AND MADE IN THE USA
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Yost Plastics and Tooling 5.45 Yes Yes Yes

You might wonder why anyone would bother buying a specialized bag of plastic washers instead of just driving a screw straight through your insulation, but the reality of moisture management proves otherwise. These 1-1/8 inch caps are essential for securing radiant barriers, house wrap, and rigid board insulation without compromising the seal. I found that using them with #6 and #8 screws, or even #11 and #12 nails, provides the necessary surface area to prevent tearing in delicate sheeting and roofing felt. Since they are designed and manufactured right here in the USA, you can trust the structural integrity of the plastic during heavy-duty construction tasks. It is a small detail that makes a massive difference in preventing air leaks and moisture intrusion in your building envelope.

What We Like
Radiant barrier compatible
Fits #6/#8 screws
Fits #11/#12 nails
Made in USA
500 piece bulk pack

SHALL 3600 Counts 18 Gauge Narrow Crown Staples & Brad Nails, Heavy Duty Galvanized 1/4" Narrow Crown Staples (3/4" 1" 1-1/4" 1-1/2"), Brad Nails (1"...

Shall 18 Gauge Staples and Brad Nail Assortment

SHALL SH131001AE

PM Score for SHALL (PM Score)

9.6 PM Score
Buy on Amazon
  • What including: 18GA 1/4 Inch narrow crown staples - 1600-count in four sizes including: 3/4", 1", 1-1/4", 1-1/2" (each 400). 18GA brad nails - 2000-count in two sizes of 1", 2" (each 1000). Heavy duty, staple assortment will meet most of your fastening needs
  • Stable and durable: Anti-rusting, constructed of galvanized steel. Ultimate tensile strength (UTS) up to 160,000 PSI. Each row (100 counts) of staples/nails is bonded together with high quality glue to avoid separation
  • Sharp chisel point: Designed to penetrate the brad nails/narrow crown staples into objects with fewer jams, buckles, and interruptions. Easily and quickly penetrate through many different materials with no deformation
  • Shatter-resistance package: All narrow crown staples and brad nails are wrapped in soft EPE pearl cotton and packed into a three layer corrugated box, which can effectively prevent breaking and separation
  • Wide application: Generally suitable for most electric/pneumatic staple guns (fit 18GA 1/4’’ narrow crown staples from 3/4" to 1-1/2" and 18 gauge brad nails from 1" to 2"). Applicable for heavy-duty stapling jobs such as housing insulation & wrap, roofing felt, fence wiring, weather stripping, boarded floor & baseboard assembly, upholstery 
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
SHALL TOOLS 9.89 Yes Yes Yes

The first thing you'll notice is the incredible structural integrity of these fasteners, thanks to a high-quality glue bond that keeps each 100-count row perfectly aligned. I put this massive 3,600-count kit to the test, and the galvanized steel really holds up against rust during heavy-duty tasks like installing weather stripping or upholstery. The chisel-point design is a game changer for preventing the dreaded jams and buckles that usually plague pneumatic staplers. Whether you are driving 3/4-inch staples into insulation or using the 2-inch brad nails for baseboard assembly, the 160,000 PSI tensile strength ensures a clean, deep penetration every single time. Even the packaging is thoughtful, using EPE pearl cotton to ensure nothing arrives bent or separated.

What We Like
Galvanized steel construction
High tensile strength
Chisel point design
Anti-rust coating
Glue-bonded rows

SHALL 18 Gauge Brad Nails, 2”, 1-1/4”, 1”, 5/8 Inch, 4000-Count Galvanized Brad Nails Assorted, 18GA Nail Gun Nails and Small Finishing Nails Assortme...

Shall 18 Gauge Galvanized Brad Nail Assortment

SHALL SH009002AE

PM Score for SHALL (PM Score)

9.6 PM Score
Buy on Amazon
  • Multiple-size Nails - Contains 4000 counts 18 gauge brad nails in 4 sizes: 2 inch, 1-1/4 inch, 1 inch and 5/8 inch. 1000-count for each size and 100-count per row. They easily swap in and out as you move from project to project. The multi-size assortment will meet most of your fastening needs.
  • Rugged and Durable - The brad nails assortment is constructed of premium galvanized steel to effectively resist rust and corrosion. Ultimate tensile strength (UTS) up to 160,000 PSI. Each row of nails is bonded together with high quality imported glue to avoid fracture
  • Sharp Chisel Point - Designed to drive the nails/staples into objects with fewer jams, buckles, and interruptions. Easily and quickly penetrate through many different materials with no deformation.
  • Shatter-resistan Package - All finishing nails are wrapped in soft EPE pearl cotton and packed into a three layer corrugated box, which can effectively prevent breaking In order to deliver the nails to you in 1 piece.
  • Universal Size - These nail gun nails are standard 18ga brad nails and generally fit most electric / cordless / power / air / pneumatic brad nailer gun. Perfect for light-duty to heavy-duty nailing jobs such as housing insulation&wrap, roofing felt, fence wiring, weather stripping, carpet under laying, upholstery, DIY and craft materials
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
SHALL TOOLS 9.89 Yes Yes Yes

Most DIYers waste precious time hunting for the right fastener size, but this Shall assortment eliminates that headache by providing four essential lengths in one box. I found the variety of 2-inch down to 5/8-inch nails incredibly convenient for switching between upholstery and heavier trim work without stopping to reorder supplies. The galvanized steel construction feels substantial, boasting a high tensile strength that stands up to demanding tasks like fence wiring or roofing felt. Because the nails feature a sharp chisel point, they bite into materials quickly without the frustrating jams or buckling often seen with cheaper, softer fasteners. Even the packaging is thoughtful, using protective pearl cotton to ensure the columns arrive intact and ready for your pneumatic or electric nailer.

What We Like
Galvanized steel construction
Four assorted sizes
Sharp chisel point
High tensile strength
Rust resistant

findmall Siding Nails 3/4 Inch by .120 Inch 3600 Count 15 Degree Electro Galvanized Roofing Nails

findmall Electro Galvanized 15 Degree Siding Nails

FINDMALL 2177199-531863 10.58 Pounds

PM Score for FINDMALL (PM Score)

6.1 PM Score
Buy on Amazon
  • Material - The roll nails are made of galvanized materials and are not easy to rust.
  • Structural Features - 15-Degree Ring Shank.
  • Size - Measures 3/4 inch in length by 0.120 inch in diameter.
  • Application - Wire collated nails are used for both new roofs and reroofing, also for attaching waterproof tar paper, roofing felt, metal drip edges, insulation board, cementitious fiber board products and vinyl siding.
  • Package - You will receive 3600 pieces Siding Nails in a pack.
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
findmall 9.63 Yes Yes Yes

You are halfway through a demanding afternoon of installing vinyl siding or securing new roofing felt when a handful of rust-prone fasteners fails you. These findmall siding nails are designed to prevent that exact headache by utilizing electro galvanized materials that resist corrosion over time. The 15-degree ring shank structure provides a much more secure grip than standard smooth nails, which is vital when you are attaching metal drip edges or cementitious fiber boards. At 3/4 inch long and .120 inch in diameter, they are sized perfectly for precision tasks like reroofing or securing insulation boards. With a massive 3600-count pack, you can tackle large-scale residential projects without constantly running back to the truck for more supplies.

What We Like
Corrosion resistant
Ring shank design
15-degree angle
Large 3600-count pack
Versatile application

Round Plastic Cap Nail 1 Inch Roofing Nails Galvanized Tar Paper Nails for House Wrap Fastening Foam Board Roofing Felt Insulation Film (4000)

Taiyin Galvanized Plastic Cap Roofing Nails

TAIYIN

PM Score for TAIYIN (PM Score)

5.1 PM Score
Buy on Amazon
  • Sufficient Quantity: you will receive 4000 pieces of plastic cap nails, ample amount to satisfy your daily use and replacement demands, you can also share with your friend
  • Quality Material: the nail caps are made of quality plastic, reliable and sturdy, not easy to break or deform. The nails are electro galvanized treatment, not easy to rust or corrode, providing you with a long use time
  • Size Information: the nail cap is about 29/32 inches in diameter, the hole measures approx. 3 mm/ 7/64 inches in diameter, the roofing nails are approx. 1 inches in length. Please check the dimension before purchasing
  • Creative Design: the round plastic caps adopt a flexible round head that conforms to surfaces, making it harder for water to get under the cap, the integrated design saving you time and energy, convenient for you to use
  • Where to Apply: the tar paper nails are widely applicable, suitable for securing roofing felt, sheathing, anchoring house wrap, fastening foam board, bringing you much convenience when using
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
LuTomorro 9.88 Yes Yes Yes

Most people overlook the tiny details of weatherproofing, yet a single poorly seated nail can compromise an entire roofing system. These Taiyin plastic cap nails solve that problem with an integrated design that actually works. The 1-inch electro-galvanized nails are built to resist rust, but the real hero is the flexible round cap. Because the cap conforms to the surface it is striking, it creates a much tighter seal that prevents water from creeping underneath. Whether you are anchoring house wrap, securing foam board, or fastening roofing felt, the 4,000-piece bulk pack ensures you won't run out mid-project. It is a specialized tool that makes professional-grade insulation and sheathing installation significantly more efficient.

What We Like
Rust-resistant galvanized finish
Flexible conforming caps
Integrated nail design
Bulk 4000-count pack
Weatherproof surface seal

Round Plastic Cap Nail 1 Inch Roofing Nails Galvanized Tar Paper Nails for House Wrap Fastening Foam Board Roofing Felt Insulation Film (2000)

Taiyin Galvanized Plastic Cap Roofing Nails

TAIYIN

PM Score for TAIYIN (PM Score)

5.1 PM Score
Buy on Amazon
  • Sufficient Quantity: you will receive 2000 pieces of plastic cap nails, ample amount to satisfy your daily use and replacement demands, you can also share with your friend
  • Quality Material: the nail caps are made of quality plastic, reliable and sturdy, not easy to break or deform. The nails are electro galvanized treatment, not easy to rust or corrode, providing you with a long use time
  • Size Information: the nail cap is about 29/32 inches in diameter, the hole measures approx. 3 mm/ 7/64 inches in diameter, the roofing nails are approx. 1 inches in length. Please check the dimension before purchasing
  • Creative Design: the round plastic caps adopt a flexible round head that conforms to surfaces, making it harder for water to get under the cap, the integrated design saving you time and energy, convenient for you to use
  • Where to Apply: the tar paper nails are widely applicable, suitable for securing roofing felt, sheathing, anchoring house wrap, fastening foam board, bringing you much convenience when using
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
LuTomorro 9.90 Yes Yes Yes

Securing a massive roll of roofing felt across a steep pitch becomes significantly less stressful when you aren't fighting with flimsy fasteners that tear through your materials. These Taiyin cap nails feature a clever, flexible round head designed to conform to the surface, which effectively prevents water from seeping under the cap and causing rot. The 1-inch length is ideal for anchoring house wrap, foam board, and insulation film with precision. Since the nails are electro-galvanized, you don't have to worry about rust compromising your work a few months down the line. With 2,000 pieces in a single pack, you'll likely have enough to finish a large-scale project or keep a substantial supply on hand for future repairs and replacements.

What We Like
Flexible round heads
Electro-galvanized coating
Water-resistant design
2000 piece bulk pack
Sturdy plastic caps

OMOTOOL Steel Roofing Felt Nails (200pcs), 0.59 Inch Roofing Felt Pins Suit for Shed Roof Roofing Felt Slate Boards,Broad Head Pins

OMOTOOL Galvanized Steel Roofing Felt Nails

OMOTOOL US-R-200-1

PM Score for OMOTOOL (PM Score)

4.9 PM Score
Buy on Amazon
  • Package includes 200 pcs steel roofing felt nails to meet your daily needs. Wire: approx. Ø 2.8mm / length: 15mm / head: approx. Ø 9mm.
  • High Quality Material:made of high quality carbon steel,the roofing nails are very hard and sharp enough to keep straight when you hammer them in,can be used at various types of materials, including wood and drywall,Suitable for use in most types of concrete walls, brick, plaster and pine.
  • Widely Used:For fastening roofing felt to wooden, used for fixed felt, repairing or installation sheds, pavilions, cabins,etc.
  • Galvanized:The surface is Galvanized, more effectively prevent nail corrosion.
  • This kit comes with a high quality PP transparent case to store all 200 pieces of your roofing felt nails.
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Seventee 7.66 Yes Yes Yes

DIY shed builders and roofing repair enthusiasts demand fasteners that won't bend the moment they hit a knot in the wood. These OMOTOOL steel roofing felt nails are built from high-quality carbon steel, providing the hardness and sharpness required to drive straight through pine, drywall, or even brick. At 15mm in length with a broad 9mm head, they are perfectly sized to secure roofing felt, slate boards, or pavilion coverings without slipping. The galvanized finish is a massive plus for outdoor longevity, as it actively fights off corrosion in damp environments. I also love that they arrive in a sturdy, transparent PP case, which keeps the 200-piece kit organized in my toolbox rather than spilling loose nails everywhere.

What We Like
Hard carbon steel
Corrosion resistant galvanization
Broad head design
Organized storage case
Sharp driving tips

ITROLLE 1Boxes Signboard Ads Nails Barrier Foundation Push Pins Round Plastic Cap Nail Roofing Nails Galvanized Tar Paper Nails for House Wrap Fasteni...

ITROLLE Plastic Cap Galvanized Steel Nails

ITROLLE 41219-SANB-1B

PM Score for ITROLLE (PM Score)

0.0 PM Score
Buy on Amazon
  • Easy to use: It is easy to operate and understand. It can be easily hammered into the wall with simple tools. The integrated design saves your time and energy and is convenient for you to use. It is used for foam board insulation and other maintenance.
  • High quality materials: Made of high carbon steel metal and high-quality plastic materials, it is sturdy, durable, high-strength, corrosion-resistant, stable and reliable, well made, not easy to break, and has a longer service life.
  • Practical design: The plastic extension part of the nail is convenient for you to grasp, which can effectively avoid hurting your hands when using a hammer, and at the same time can increase the force-bearing area, making the installation more stable and firm.
  • Wide range of applications: very suitable for wallpaper installation and reinforcement, photo frame installation and fixing, bar installation, poster installation, spray cloth installation, wallpaper board, foam board installation, signboard installation, etc., suitable for home, school, hotel, stage, installation and use.
  • Package content: You will get 50 pieces of plastic cap nails, enough quantity to meet your daily use needs, very suitable for sharing with your family or friends. Please check the size before buying.
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
DGZJSM 9.96 Yes Yes Yes

Most DIYers assume that securing insulation or signage requires heavy-duty industrial hardware, but these specialized cap nails actually simplify the entire process. I found that the integrated design of these ITROLLE fasteners removes the typical headache of slipping hammers or bruised knuckles. The high carbon steel core provides the necessary strength for roofing felt and foam boards, while the plastic cap acts as a built-in driver that increases your force-bearing area. This clever engineering makes it much easier to drive them flush into walls or boards without damaging the surface. Whether you are hanging a heavy signboard or installing house wrap, the combination of corrosion-resistant metal and stable plastic heads makes these a reliable staple for home maintenance and professional installations alike.

What We Like
High carbon steel
Corrosion resistant
Protective plastic caps
Easy hammer application
Stable fastening
Buying Guide

A Guide to Selecting the Best Felt Roofing Nails

A Guide to Selecting the Best Felt Roofing Nails

Material Composition and Corrosion Resistance

The most significant factor in selecting felt roofing nails is the material they are made from. Because roofing materials are constantly exposed to rain, humidity, and dew, the nails must possess exceptional anti-corrosive properties. Standard steel nails will oxidize rapidly, leading to 'bleeding' rust that stains the roofing material and eventually causes the nail head to disintegrate, leaving the felt loose. For residential and commercial projects, look for galvanized steel or copper nails. Galvanized nails feature a protective zinc coating that provides a sacrificial layer against rust, making them the industry standard for cost-effective durability. If you are working with high-end copper roofing or in coastal environments where salt spray is a factor, investing in solid copper or high-grade stainless steel is essential to prevent galvanic corrosion.

Head Shape and Surface Area

The geometry of the nail head is just as important as the metal itself. In felt roofing, the goal is to secure the membrane without tearing through it. You should look for nails with a wide, flat head—often referred to as 'cap nails' or 'umbrella heads.' A larger surface area distributes the downward pressure more evenly across the felt material. If the head is too small, the nail can act like a punch, slicing through the bitumen or fiberglass layers when the roof shifts or when wind applies upward pressure. A wide head ensures that the nail grips the material securely, creating a watertight seal when combined with the appropriate roofing sealant.

Length and Penetration Depth

Selecting the correct length is a balancing act between securing the material and avoiding damage to the underlying substrate. If the nail is too short, it won't achieve sufficient 'bite' into the wood decking or felt layers, making it susceptible to being pulled out by wind. If it is too long, you risk driving the tip through the roof deck and into the interior of the building. Generally, felt roofing nails are shorter than standard framing nails. You must calculate your length based on the thickness of the felt layers you are installing plus the thickness of the roof deck. Always ensure there is enough shank length to provide structural stability without compromising the integrity of the sub-roof.

Shank Design and Driving Ease

The way a nail interacts with the roofing material during installation matters for both speed and quality. Smooth-shank nails are easier to drive straight and are often preferred when working with thick, multi-layered felt that might otherwise cause a ring-shank nail to 'track' or bend off-course. However, some professionals prefer ring-shank or ribbed nails because the texture provides superior holding power once the nail is seated, making it much harder for the wind to pull the nail out. When deciding, consider your installation method: if you are using a pneumatic roofing nailer, ensure the nail type is compatible with your specific tool's strip or collation method.

Summary Recommendation Logic

To make the best decision, first identify your environment. For standard residential repairs, high-quality galvanized nails with wide heads are the most logical choice. For coastal or high-moisture zones, skip the galvanized option and move straight to stainless steel or copper. Finally, always match your nail length to the total thickness of your roofing stack to ensure you are anchoring into the deck without puncturing the ceiling below.

Ready to choose?

Jump back to our ranked picks or compare the shortlist side by side.

Frequently Asked Questions

Quick answers about Felt Roofing Nails before you buy.

The ideal nail must have a large enough head to prevent pulling through the felt material and must be made of corrosion-resistant materials like galvanized steel to withstand constant moisture exposure.

Ring-shank nails feature ridges that provide superior grip and pull-out resistance, making them the preferred choice for roofing where wind uplift is a concern, whereas smooth-shank nails are easier to drive but offer less grip.

Length depends on the thickness of the substrate, but generally, you need enough length to penetrate the decking securely while ensuring the head sits flush against the felt without tearing it.

No. Standard wood nails often lack the wide, flat heads required to hold roofing felt in place, which can lead to the material tearing away during high winds or temperature shifts.

Roofing is a high-moisture environment. Galvanized coatings protect the steel from rusting, which prevents structural degradation and unsightly rust streaks on your roof.

While it depends on the specific installation instructions, a standard rule of thumb is to nail every 3 to 6 inches along the edges and laps to ensure a wind-tight seal.

For small DIY repairs or single rolls, a hammer provides the necessary control to avoid over-driving the nail. For large-scale professional installations, a pneumatic roofing nailer significantly increases speed and consistency.
Rankings & Insights

Our Felt Roofing Nails Rankings

8 Products Compared
6.2 Avg PM Score
6 Brands Ranked

Top 10 Felt Roofing Nails Brands on Amazon

Share of top-ranked products by brand, from our rankings.

  1. 01 Shall 2 (25%)
  2. 02 Taiyin 2 (25%)
  3. 03 Findmall 1 (12.5%)
  4. 04 Itrolle 1 (12.5%)
  5. 05 Omotool 1 (12.5%)
  6. 06 Yost Plastics 1 (12.5%)

How We Selected These Products

We compared Felt Roofing Nails products using product details and customer ratings to identify the best options in the fasteners..

From that comparison we shortlisted the top 8 Felt Roofing Nails for this page..

We aim to help you find the right nails products for your needs and save you time when choosing which Felt Roofing Nails to buy.