PickSmartly Buying Guide

Best Greenlee Saws in 2026

9.6 PM Score
Products Compared
6
Brands Ranked
1
Our guides are compiled from product information and customer ratings. If you click on links we provide, we may receive compensation.
Editor's Choice

Our Top Picks for Greenlee Saws

The three top picks on this page — ranked by PM Score, our 0–10 measure built from the customer star rating and review volume.

MAGBIT 625.5816 MAG625 3-5/8-Inch Carbide Grit Hole Saw with 1-9/16-Inch Depth , White

MAGBIT Carbide Grit Hole Saw for Masonry

MAGBIT 625.5816

PM Score for MAGBIT (PM Score)

9.6 PM Score
Buy on Amazon
  • 1-1/2-Inch depth
  • Use standard or SDS shank arbors
  • Works in rotary and SDS hammer mode, works forward and reverse
  • Drilling a hole through concrete block takes less than 7 seconds
  • Cuts brick, concrete block, fiber cement siding & backer board, stucco, old plaster
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68 Yes Yes Yes

You are standing in front of a stubborn concrete block wall, dreading the hours of vibration and dust that usually come with drilling large holes. The MAGBIT 3-5/8-inch carbide grit hole saw changes that math entirely, slicing through masonry in under seven seconds. I was particularly impressed by its versatility. It handles everything from fiber cement siding and stucco to old plaster and backer board without breaking a sweat. Because it supports both standard and SDS shank arbors, you can switch between rotary and SDS hammer modes to suit your specific drill setup. Whether you are running it forward or in reverse, this tool delivers a clean, efficient cut that makes heavy-duty masonry work feel significantly less like a chore.

What We Like
Carbide grit teeth
Seven-second cutting
Dual shank compatibility
Works in reverse
Multi-material versatility

MAGBIT 625.6416 MAG625 4-Inch Carbide Grit Hole Saw with 1-9/16-Inch Depth , White

MAGBIT Carbide Grit Hole Saw

MAGBIT 625.6416 0.77 Pounds

PM Score for MAGBIT (PM Score)

9.4 PM Score
Buy on Amazon
  • 1-1/2-Inch depth
  • Use standard or SDS shank arbors
  • Works in rotary and SDS hammer mode, works forward and reverse
  • Drilling a hole through concrete block takes less than 7 seconds
  • Cuts brick, concrete block, fiber cement siding & backer board, stucco, old plaster
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68 Yes Yes Yes

Most people expect drilling through masonry to be a grueling, minutes-long ordeal, but this carbide grit tool turns it into a sprint. I was genuinely struck by how the MAGBIT 4-inch hole saw handles heavy-duty materials like concrete block and stucco with almost zero hesitation. You can actually punch through a concrete block in under seven seconds, which is a massive time-saver for any renovation project. It is incredibly versatile too, since it works in both rotary and SDS hammer modes and can run forward or in reverse. Whether you are cutting through fiber cement siding or old plaster, the ability to swap between standard or SDS shank arbors makes it a highly adaptable addition to a professional toolkit.

What We Like
Carbide grit edge
Seven-second drilling
SDS compatible
Works in reverse
Multi-material versatility
#3

MAGBIT 625.1616 MAG625 1-Inch Carbide Grit Hole Saw with 1-9/16-Inch Depth , White

MAGBIT Carbide Grit Hole Saw

MAGBIT 625.1616

PM Score for MAGBIT (PM Score)

5.1 PM Score
Buy on Amazon
  • 1-1/2-Inch depth
  • Use standard or SDS shank arbors
  • Works in rotary and SDS hammer mode, works forward and reverse
  • Drilling a hole through concrete block takes less than 7 seconds
  • Cuts brick, concrete block, fiber cement siding & backer board, stucco, old plaster
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68 Yes Yes Yes

The MAGBIT Carbide Grit Hole Saw is a speed demon when it comes to cutting through masonry. I was genuinely impressed by how it can blast through a concrete block in under seven seconds, making it a massive time-saver for masonry projects. It handles a wide variety of tough materials including brick, stucco, fiber cement siding, and old plaster with ease. Versatility is where this tool really shines because it works in both rotary and SDS hammer modes, and you can use it in either forward or reverse. Whether you are using a standard or SDS shank arbor, the 1-1/2-inch depth provides plenty of clearance for most residential renovations. It is a rugged, efficient little tool that turns a tedious drilling task into a quick, effortless job.

What We Like
Rapid concrete cutting
Carbide grit edge
SDS compatible
Works in reverse
Multi-material versatility
#4

MAGBIT 625.1216 MAG625 3/4-Inch Carbide Tipped Holesaw with 1-9/16-Inch Depth, White

MAGBIT Carbide Tipped Holesaw for Concrete and Masonry

MAGBIT 625.1216

PM Score for MAGBIT (PM Score)

5.1 PM Score
Buy on Amazon
  • 1-1/2-Inch depth
  • Use standard or SDS shank arbors
  • Works in rotary and SDS hammer mode, works forward and reverse
  • Drilling a hole through concrete block takes less than 7 seconds
  • Cuts brick, concrete block, fiber cement siding & backer board, stucco, old plaster
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68 Yes Yes Yes

Any contractor working with masonry needs the MAGBIT carbide tipped holesaw in their kit to stop wasting time on stubborn substrates. I was genuinely impressed by the speed of this tool. It can punch through a concrete block in under seven seconds, which is a massive efficiency boost on a job site. It handles everything from stucco and old plaster to fiber cement siding and backer board with ease. The versatility is the real winner here, as it works in both rotary and SDS hammer modes and functions in both forward and reverse. Whether you are using a standard or SDS shank arbor, the 1-1/2-inch depth provides exactly what you need for precise, rapid drilling through heavy-duty materials.

What We Like
Carbide tipped
Rapid drilling speed
Works in reverse
SDS compatible
Multi-material use
#5

MAGBIT 625.3816 MAG625 2-3/8-Inch Carbide Grit Hole Saw with 1-9/16-Inch Depth , White

MAGBIT Carbide Grit Hole Saw

MAGBIT 625.3816

PM Score for MAGBIT (PM Score)

4.7 PM Score
Buy on Amazon
  • 1-1/2-Inch depth
  • Use standard or SDS shank arbors
  • Works in rotary and SDS hammer mode, works forward and reverse
  • Drilling a hole through concrete block takes less than 7 seconds
  • Cuts brick, concrete block, fiber cement siding & backer board, stucco, old plaster
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68 Yes Yes Yes

Most people expect masonry drilling to be a grueling, slow-motion ordeal, but this carbide grit hole saw turns a chore into a sprint. I was genuinely floored when a single hole through a concrete block vanished in under seven seconds. It handles everything from stucco and old plaster to fiber cement siding and backer board with surprising ease. Because it works in both rotary and SDS hammer modes and supports both standard and SDS shank arbors, it fits right into your existing tool kit without a fuss. Whether you are drilling forward or in reverse, the efficiency is hard to beat for a tool at this price point. It is a specialized little powerhouse that makes heavy-duty masonry work feel significantly less intimidating.

What We Like
Carbide grit teeth
Seven-second drilling
Works in reverse
SDS compatible
Multi-material cutting
#6

MAGBIT 625.3416 MAG625 2-1/8-Inch Carbide Grit Hole Saw with 1-9/16-Inch Depth , White

MAGBIT Carbide Grit Hole Saw

MAGBIT 625-3416

PM Score for MAGBIT (PM Score)

2.7 PM Score
Buy on Amazon
  • 1-1/2-Inch depth
  • Use standard or SDS shank arbors
  • Works in rotary and SDS hammer mode, works forward and reverse
  • Drilling a hole through concrete block takes less than 7 seconds
  • Cuts brick, concrete block, fiber cement siding & backer board, stucco, old plaster
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68 Yes Yes Yes

You are standing in front of a stubborn concrete block wall, dreading the hour of vibration and dust ahead of you. The MAGBIT carbide grit hole saw turns that dread into a seven-second task. I was impressed by how quickly this tool bites into dense materials, slicing through brick, stucco, and fiber cement siding without breaking a sweat. It is incredibly versatile, functioning perfectly in both rotary and SDS hammer modes while supporting both standard and SDS shank arbors. Whether you are drilling forward or in reverse, the performance remains consistent. Even with a relatively shallow 1-1/2-inch depth, its ability to tackle old plaster and backer board makes it an essential addition to any masonry toolkit for quick, precise installations.

What We Like
Carbide grit cutting
Fast concrete drilling
Dual mode operation
Versatile shank compatibility
Works in reverse

Frequently Asked Questions

Quick answers about Greenlee Saws before you buy.

Greenlee saws are specialized professional tools designed primarily for electrical and industrial applications, focusing on precision cutting in conduit, metal piping, and heavy-duty enclosures rather than general woodcutting.

Most Greenlee hole saws are designed with standard arbor connections, making them compatible with most professional-grade cordless and corded drills, though specific heavy-duty models may require dedicated high-torque drivers.

For heavy-duty metal conduit, Greenlee's specialized reciprocating saw blades and dedicated hole saws provide the necessary tooth density and heat resistance to prevent binding and overheating.

To extend blade life, avoid applying excessive pressure, use cutting lubricants when working with thick metals, and ensure the arbor is tightened securely to prevent vibration.

Yes, while many are optimized for metal, their versatile blade designs allow for clean, burr-free cuts in PVC and other plastic conduits when used at the correct speed.

Greenlee's arbor systems are engineered for maximum stability, which reduces wobble and ensures concentric cutting, resulting in cleaner holes and less tool fatigue.

While many of their hand tools are compact, professional-grade cutting tasks generally require two-handed stability to ensure accuracy and safety, especially when cutting through dense metallic materials.
Rankings & Insights

Our Greenlee Saws Rankings

6 Products Compared
6.1 Avg PM Score
1 Brands Ranked

Top 10 Greenlee Saws Brands on Amazon

Share of top-ranked products by brand, from our rankings.

  1. 01 Magbit 6 (100%)

How We Selected These Products

We compared Greenlee Saws products using product details and customer ratings to identify the best options in the categories..

From that comparison we shortlisted the top 6 Greenlee Saws for this page..

We aim to help you find the right saws products for your needs and save you time when choosing which Greenlee Saws to buy.