Best 6 Variable Gain Amplifiers in 2026
- Products Compared
- 25
- Brands Ranked
- 4
In precision signal processing and test instrumentation, the ability to fine-tune signal strength without compromising integrity is paramount. A 6-variable gain amplifier is a specialized piece of hardware designed to provide multiple stages or channels of adjustable amplification, allowing engineers and researchers to scale input signals across a wide dynamic range. Unlike fixed-gain components, these devices offer the flexibility required for complex testing environments where input levels may fluctuate significantly or where multiple signal paths must be independently modulated. Selecting the right unit requires a deep dive into technical specifications that go far beyond simple decibel increments.
Our Top Picks for 6 Variable Gain Amplifiers
The three top picks on this page — ranked by PM Score, our 0–10 measure built from the customer star rating and review volume.
Quick Filter
Showing 25 of 25BOSS Audio Systems R1100M Riot Series Car Audio Subwoofer Amplifier - 1100 High Output, Monoblock, Class A/B, 2/4 Ohm Stable, Low/High Level Inputs, L...
BOSS Audio Systems Riot Series Monoblock Subwoofer Amplifier
- Power - 1100 Max x 1 @ 2 Ohms, 550 Max x 1 @ 4 Ohms
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
- Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
- Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
- Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
- Switchable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
- Variable Input Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- Specs - Dimensions: 9.13” x 10.44” x 2.25”, Weight: 4.43 lbs., Speaker Impedance: 2 to 8 Ohm, THD @ RMS Output: 0.01%, S/N Ratio: 102 dB, Frequency Response: 9 Hz to 50 kHz, Fuse Quantity: 1 30 Amp ATO Blade
- Warranty - BOSS Audio Systems provides a 6 Year Platinum Online Dealer Warranty for purchases through Amazon.Com. We strongly encourage professional installation of this product to ensure proper functionality
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Speece, Inc. | 9.88 | Yes | Yes | Yes |
The heavy, solid feel of the Riot Series monoblock amplifier immediately suggests it is built to handle serious current. This Class A/B unit delivers a massive 1100W peak output at 2 Ohms, providing the punchy low-end response that transforms a standard car audio setup into a high-output experience. I was particularly impressed by the precision of the MOSFET power supply, which maintains voltage stability without the messy feedback loops found in cheaper gear. You get excellent control over your soundstage thanks to the variable low-pass crossover and a switchable bass boost that lets you dial in your preferred frequency profile. Whether you are running RCA inputs or high-level wiring from a factory head unit, the variable input gain ensures you can match the signal perfectly without introducing distortion.
Skar Audio RP-75.4AB 500 Watt Full-Range Class A/B 4 Channel Car Amplifier
Skar Audio RP-75.4AB 4-Channel Class A/B Amplifier
- 500-Watt MOSFET 4-Channel Class A/B Power Car Amplifier
- RMS Power at 2 Ohms: 125 Watts x 4 Channels
- RMS Power at 4 Ohms: 75 Watts x 4 Channel
- User Adjustable Controls: Gain, Variable LPF, HPF, Bass EQ Switch (0, +6, +12 dB)
- 4 Way Protection Circuitry | Frequency Response: 20 Hz - 20,000 Hz
- Signal to Noise Ratio: 105 dB
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| SKAR AUDIO | 9.84 | Yes | Yes | Yes |
Most car audio enthusiasts settle for thin, harsh-sounding Class D amps when they actually crave the warm, musical fidelity that only a Class A/B design can deliver. The Skar Audio RP-75.4AB changes the game by providing a robust 500-watt MOSFET output that prioritizes sound quality without sacrificing punch. I found the tuning process incredibly intuitive thanks to the user-adjustable gain, variable LPF, and HPF settings. You can really fine-tune your low end using the Bass EQ switch, which offers 0, +6, and +12 dB increments. With a signal-to-noise ratio of 105 dB and a wide frequency response, this unit delivers a clean, undistorted signal that keeps your music sounding crisp. It is a reliable workhorse backed by 4-way protection circuitry for peace of mind.
BOSS Audio Systems PF1800 4 Channel Car Amplifier - 1800 Watts, Full Range, Class A-B, 2-4 Ohm Stable, Mosfet Power Supply, Bridgeable
BOSS Audio Systems PF1800 4-Channel Full Range Amplifier
- Power - 450 Watts Max x 4 @2-Ohms, 225 Watts Max x 4 @4-Ohms, 900 Watts Max x 2 Bridged @4 Ohms
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
- Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
- Mosfet Power Supply - A MOSFET is basically an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
- Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- Variable BASS Boost - With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s)
- Bridgeable - Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels
- Specs - Dimensions: 13.5” x 10.31” x 2.25, Weight: 12 lbs.
- Warranty - BOSS Audio Systems provides a powerful 6-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Speece, Inc. | 9.88 | Yes | Yes | Yes |
The BOSS Audio Systems PF1800 stands as a powerhouse solution for budget-conscious enthusiasts looking to upgrade their entire vehicle audio setup. By utilizing a Class A/B topology, this amplifier delivers a rich, full-range sound that handles everything from crisp high frequencies to deep bass. You can run your door speakers and subwoofers simultaneously, or use the bridgeable feature to combine channels for a massive 900-watt output at 4 Ohms. The integrated MOSFET power supply ensures precise voltage control, while the variable gain and bass boost allow for fine-tuned signal management. It is a heavy-duty, 12-pound unit that provides serious versatility for anyone wanting to move beyond basic factory head units without breaking the bank.
Skar Audio RP-75.4ABM 500 Watt Full-Range Class A/B 4-Channel Marine Amplifier
Skar Audio 500 Watt 4-Channel Marine Amplifier
- 500-Watt MOSFET 4-Channel Class A/B Power Marine Amplifier
- RMS Power at 2 Ohms: 125 Watts x 4 Channels
- RMS Power at 4 Ohms: 75 Watts x 4 Channel
- Fully Marini zed with Waterproof Coating on Circuit Board & Rust Proof Painting on Mechanical Case
- User Adjustable Controls: Gain, Variable LPF, HPF, Bass EQ Switch (0, +6, +12 dB)
- Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow
- Signal to Noise Ratio: 105 dB, 8 Gauge Power and Ground Input Terminals
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| SKAR AUDIO | 9.84 | Yes | Yes | Yes |
Salt spray and humidity usually mean a death sentence for high-end audio gear, but this Skar Audio amplifier is built to thrive in the middle of a lake excursion. I put the RP-75.4ABM to the test, and its marine-grade construction—specifically that waterproof circuit board coating and rust-proof mechanical case—gives you real peace of mind when mounting it in a boat. It delivers a solid 125 Watts RMS per channel at 2 Ohms, providing enough punch to drive a full-range setup without losing clarity. The user-adjustable controls, including the variable LPF, HPF, and a dedicated Bass EQ switch, allow for precise tuning on the fly. With a 105 dB signal-to-noise ratio and robust 4-way protection circuitry, it’s a reliable workhorse for any aquatic sound system.
BOSS Audio Systems AR2000M Monoblock Car Amplifier - 2000 Watts, 2-4 Ohm Stable, Class A-B, Mosfet Power Supply, Gray
BOSS Audio Systems AR2000M Monoblock Car Amplifier
- Power - 2000 watts Max X 1 @2-ohms, 1000 watts Max X 1 @4-ohms
- Class A/B topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
- Low/high level inputs - a low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
- Variable low-pass Crossover - subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
- Variable bass Boost - bass Boost allows you to adjust the low bass within the boost Range to just the way you like it
- Variable gain control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- Dimensions - 13.13” x 6.5” x 2.8”, weight - 3.81 lbs. It can be installed in a variety of different places due to its’ slim and Compact design
- Warranty - BOSS Audio provides a powerful 6-year platinum online dealer warranty so long as the purchase is made through Amazon.Com. We strongly encourage professional Installation of this product to ensure proper and safe functionality
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| CE Showroom | 9.89 | Yes | Yes | Yes |
You are finally sitting in the driver's seat, hitting play on a bass-heavy track, and feeling that deep, rhythmic pulse shake your chassis exactly the way you envisioned. The BOSS Audio Systems AR2000M makes this possible by delivering up to 2000 watts of max power through a Class A/B topology that balances current flow for a rich sound. I found the installation process much more flexible than expected because the slim, compact frame fits into tight spaces without much struggle. You get precise control over your subwoofers thanks to the variable low-pass crossover and a dedicated bass boost to dial in your preferred low-end frequencies. Just remember that the gain control is for signal matching rather than volume, so set it carefully to keep your setup running smoothly.
Sound Storm EV2.1000 Evolution 1000 Watt, 2 Channel, 2 to 8 Ohm Stable Class A/B, Full Range, Bridgeable, MOSFET Car Amplifier with Remote Subwoofer C...
Sound Storm EV2.1000 Evolution 1000 Watt 2-Channel Amplifier
- 550 W MAX Power @ 2 Ohm x 2 Channels
- 250 W MAX Power @ 4 Ohm x 2 Channels
- 1000 W MAX Bridged Power @ 4 Ohm x 1 Channels
- Full-Range, Class A / B Topology, MOSFET Power Supply
- Low and High Level Inputs, Variable Low Pass Crossover, Variable High Pass Crossover
- Variable Bass Boost, Variable Input Gain Control, Input Sensitivity Selector, Remote Subwoofer Control
- Dimensions: Depth 9.5” x Width 10” x Height 2.3”
- 6 Year Platinum Online Dealer Warranty
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| BargainFlip | 9.88 | Yes | Yes | Yes |
The Sound Storm EV2.1000 Evolution delivers massive bridged power that punches well above its weight class. Using a Class A/B topology and a MOSFET power supply, this amplifier provides a clean, full-range signal that scales beautifully from standard stereo setups to a heavy-hitting single subwoofer configuration. I was particularly impressed by the tuning versatility. You get variable high and low pass crossovers alongside a dedicated remote subwoofer control to dial in your bass on the fly. Whether you are running it at 2 Ohms for extra channel punch or bridging it for that 1000W peak, the setup feels robust. It is a compact, high-output solution for anyone looking to bridge the gap between factory sound and a custom audio experience without breaking the bank.
Sound Storm EV2.2000 Evolution 2000 Watt, 2 Channel, 2 to 8 Ohm Stable Class A/B, Full Range, Bridgeable, MOSFET Car Amplifier with Remote Subwoofer C...
Sound Storm Evolution 2000 Watt 2 Channel Car Amplifier
- 1000 W MAX Power @ 2 Ohm x 2 Channels
- 500 W MAX Power @ 4 Ohm x 2 Channels
- 2000 W MAX Bridged Power @ 4 Ohm x 1 Channels
- Full-Range, Class A / B Topology, MOSFET Power Supply
- Low and High Level Inputs, Variable Low Pass Crossover, Variable High Pass Crossover
- Variable Bass Boost, Variable Input Gain Control, Input Sensitivity Selector, Remote Subwoofer Control
- Dimensions: Depth 16” x Width 10” x Height 2.3”
- 6 Year Platinum Online Dealer Warranty
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Moofin | 9.87 | Yes | Yes | Yes |
Budget-conscious audiophiles looking to bridge the gap between entry-level setups and high-output systems need the Sound Storm EV2.2000 in their trunks. This Class A/B topology amplifier delivers a massive 2000W of bridged power, making it a versatile powerhouse for driving both full-range speakers and heavy subwoofers. I was particularly impressed by the granular control offered through the variable high and low pass crossovers, along with the dedicated remote subwoofer control. The inclusion of a MOSFET power supply ensures the electrical stability required when you push those 1000W peaks at 2 Ohms. Whether you are utilizing the low or high-level inputs, the tuning options like variable bass boost and input sensitivity selectors make fine-tuning your cabin's acoustics much less of a headache.
BOSS Audio Systems R1002 Riot Series Car Stereo Amplifier - 200 High Output, 2 Channel, Class A/B, 2/4 Ohm Stable, Low/High Level Inputs, Full Range,...
BOSS Audio Systems Riot Series 2-Channel Amplifier
- Power - 100 Max x 2 @ 2 Ohms, 50 Max x 2 @ 4 Ohms
- Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
- Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
- Variable Input Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
- Specs - Dimensions: 5.25” x 9” x 2”, Weight: 2.2 lbs., Speaker Impedance: 2 to 8 Ohm, THD @ RMS Output: 0.01%, S/N Ratio: 90 dB, Frequency Response: 12 Hz to 22 kHz, Fuse Quantity: 1 7.5 Amp ATO Blade
- BOSS Audio Systems provides a 6 Year Platinum Online Dealer Warranty for purchases through Amazon.Com. We strongly encourage professional installation of this product to ensure proper functionality
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Speece, Inc. | 9.88 | Yes | Yes | Yes |
The BOSS Audio Systems R1002 Riot Series delivers impressive versatility by acting as a high-output powerhouse for both your main speakers and subwoofers. Using a Class A/B topology, this compact unit balances current flow to maintain audio integrity across a wide frequency response of 12 Hz to 22 kHz. It is incredibly easy to integrate into existing setups thanks to the inclusion of both low-level RCA and high-level wire inputs. While setting it up, remember that the variable input gain is meant for signal matching rather than volume control, so dial it in carefully to avoid distortion. At just 2.2 lbs, it is a lightweight solution for anyone looking to boost their car's audio performance without taking up massive amounts of space.
BOSS Audio Systems R6002 Riot Series Car Audio Stereo Amplifier - 1200 High Output, 2 Channel, Class A/B, 2/4 Ohm, Low/High Level Inputs, High/Low Pas...
BOSS Audio Systems Riot Series 2 Channel Amplifier
- Power - 600 Max x 2 @ 2 Ohms, 300 Max x 2 @ 4 Ohms, 1200 Max Bridged x 1 @ 4 Ohms
- Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
- Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
- Variable Input Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
- Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
- Specs - Dimensions: 12.28” x 10.44” x 2.25”, Weight: 5.86 lbs., Speaker Impedance: 2 to 8 Ohm, THD @ RMS Output: 0.01%, S/N Ratio: 102 dB, Frequency Response: 9 Hz to 50 kHz, Fuse Quantity: 2 25 Amp ATO Blade
- Warranty - BOSS Audio Systems provides a 6 Year Platinum Online Dealer Warranty for purchases through Amazon.Com. We strongly encourage professional installation of this product to ensure proper functionality
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Speece, Inc. | 9.88 | Yes | Yes | Yes |
Can a budget-friendly upgrade truly transform your car's acoustic landscape? The BOSS Audio Systems R6002 Riot Series proves that you don't need to break the bank to achieve significant power gains. Utilizing a Class A/B topology and a precise MOSFET power supply, this amplifier delivers a clean signal with a 102 dB signal-to-noise ratio. Whether you are driving full-range speakers or bridging it to a subwoofer for that deep bass hit, the versatility is impressive. I found the variable input gain control particularly helpful for fine-tuning the signal from your receiver, ensuring you avoid distortion. It manages a massive 1200W max output when bridged, making it a robust choice for anyone looking to move beyond basic factory sound without a complex installation headache.
BOSS Audio Systems R3002 Riot Series Car Audio Amplifier - 600 High Output, 2 Channel, 2/8 Ohm, High/Low Level Inputs, High/Low Pass Crossover, Full R...
BOSS Audio Systems Riot Series 2-Channel Amplifier
- Power - 300 Max x 2 @ 2 Ohms, 150 Max x 2 @ 4 Ohms, 600 Max Bridged x 1 @ 4 Ohms
- Bridgeable - Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels
- Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
- Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
- Fixed High-Pass Crossover - Speakers reproduce sound based on high, low or mid-range frequencies. The High-Pass Crossover gears specifically towards “highs” in all size speakers including mid ranges and tweeters
- Variable Bass Boost - With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s)
- Variable Input Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- Specs - Dimensions: 9.16” x 10.44” x 2.25”, Weight: 4.25 lbs., Speaker Impedance: 2 to 8 Ohm, THD @ RMS Output: 0.01%, S/N Ratio: 102 dB, Frequency Response: 9 Hz to 50 kHz, Fuse Quantity: 1 35 Amp ATO Blade
- Warranty - BOSS Audio Systems provides a 6 Year Platinum Online Dealer Warranty for purchases through Amazon.Com. We strongly encourage professional installation of this product to ensure proper functionality
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Speece, Inc. | 9.88 | Yes | Yes | Yes |
Budget-conscious car audio enthusiasts looking to bridge the gap between factory sound and a punchy aftermarket setup will find the BOSS Audio Systems R3002 a surprisingly capable workhorse. This Class AB amplifier offers impressive flexibility, allowing you to run it as a standard two-channel unit or bridge it into a single 600W powerhouse for a dedicated subwoofer. I was particularly impressed by the granular control offered through the variable low-pass crossover and the bass boost, which let you fine-tune the low-end response to your specific cabin acoustics. Whether you are tapping into a head unit via high-level inputs or using RCA cables, the 102 dB signal-to-noise ratio ensures your music stays clean without excessive hiss. It is a compact, heavy-duty solution for anyone needing a reliable power boost without breaking the bank.
BOSS Audio Systems PT1600 2 Channel Car Amplifier – Phantom Series, 1600 Watts, Full Range, Class A/B, 2-8 Ohm Stable, Mosfet Power Supply, Bridgeable
BOSS Audio Systems Phantom Series 2 Channel Amplifier
- Power - 800 Watts Max x 2 @2-Ohms 400 Watts Max x 2 @4-Ohms 1600 Watts Max x 1 Bridged @4 Ohms
- Full Range - With a Full Range amplifier you not only have the option to run your speakers but also your subwoofers
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
- Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
- Variable Gain Control - The gain control is not for adjusting volume It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- Variable Bass Boost - With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s)
- Bridgeable - Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels
- Specs - Dimensions 14” x 10 3” x 2 3” Weight 9 lbs
- - BOSS Audio Systems provides a powerful 6 year Platinum Online Dealer so long as the purchase is made through We strongly encourage professional installation of this product to ensure proper and safe functionality
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Speece, Inc. | 9.88 | Yes | Yes | Yes |
The BOSS Audio Systems Phantom Series PT1600 delivers a massive punch for budget-conscious enthusiasts looking to upgrade their car's soundstage. By utilizing a Class A/B topology, this amplifier balances high current flow with efficiency to drive both full-range speakers and subwoofers effectively. I found the inclusion of a MOSFET power supply particularly impressive, as it precisely controls voltage to eliminate sensing loss. You can easily customize your output through the variable gain control and the dedicated bass boost, which gives you granular command over your low-end response. Whether you are running it in standard two-channel mode or bridging it to hit 1600 watts at 4 Ohms, this unit provides a versatile foundation for a serious audio build. Just remember to have a pro handle the installation to get the most out of that 9-pound powerhouse.
BOSS Audio Systems R4002 Riot Series Car Audio Stereo Amplifier – 800 High Output, 2 Channel, Class A/B, 2/4 Ohm, Low/High Level Inputs, High/Low Pass...
BOSS Audio Systems Riot Series 2-Channel Amplifier
- Power - 400 Max x 2 @ 2 Ohms, 200 Max x 2 @ 4 Ohms, 800 Max Bridged x 1 @ 4 Ohms
- Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
- Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
- Variable Input Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
- Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
- Specs - Dimensions: 10.72” x 10.44” x 2.25”, Weight: 5.20 lbs., Speaker Impedance: 2 to 8 Ohm, THD @ RMS Output: 0.01%, S/N Ratio: 102 dB, Frequency Response: 9 Hz to 50 kHz, Fuse Quantity: 1 40 Amp ATO Blade
- Warranty - BOSS Audio Systems provides a 6 Year Platinum Online Dealer Warranty for purchases through Amazon.Com. We strongly encourage professional installation of this product to ensure proper functionality
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Speece, Inc. | 9.88 | Yes | Yes | Yes |
Most car audio setups struggle with thin, weak sound, but the BOSS Audio Systems R4002 Riot Series brings a level of punch that standard factory receivers simply cannot match. This Class A/B amplifier is a versatile workhorse, offering enough flexibility to power your door speakers or be bridged to drive a subwoofer. I was particularly impressed by the MOSFET power supply, which keeps current flow precise and stable for cleaner output. With a wide frequency response ranging from 9 Hz to 50 kHz and a very low 0.01% THD, the audio remains crisp even as you push the volume. Whether you are utilizing the RCA low-level inputs or the high-level wiring for a seamless integration, this unit provides a professional-grade boost to your vehicle's acoustics.
BOSS Audio Systems PT1000 2 Channel Car Amplifier - 1000 Watts, Full Range, Class A/B, 2-8 Ohm Stable, Mosfet Power Supply, Bridgeable
BOSS Audio Systems PT1000 2-Channel Full Range Amplifier
- Power - 500 Watts Max x 2 @2-Ohms, 250 Watts Max x 2 @4-Ohms, 1000 Watts Max x 1 Bridged @4 Ohms
- Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
- Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
- Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- Variable Bass Boost - With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s)
- Bridgeable - Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels
- Specs - Dimensions: 9. 5” x 10. 31” x 2. 25”, Weight: 6. 62 lbs.
- - BOSS Audio Systems provides a powerful 6 year Platinum Online Dealer so long as the purchase is made through . We strongly encourage professional installation of this product to ensure proper and safe functionality
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Speece, Inc. | 9.88 | Yes | Yes | Yes |
You might assume a budget-friendly amplifier can't deliver serious punch, but the BOSS Audio Systems PT1000 challenges that doubt immediately. This Class A/B unit is a versatile workhorse, capable of driving standard speakers or being bridged to push a massive 1000 watts to a single subwoofer. The inclusion of a MOSFET power supply is a standout, as it manages voltage and current with much higher precision than cheaper alternatives. I particularly like the level of control offered through the variable gain and bass boost settings, which allow you to fine-tune the signal from your receiver rather than just cranking the volume. It is a substantial piece of gear at over six pounds, and while professional installation is highly recommended, the power density it provides for the price is impressive.
Sound Storm Laboratories EV3000D Evolution Series Car Audio Amplifier – 5000 High Output, Class D, Monoblock, 1 Ohm, Low Level Inputs, Low Pass Crosso...
Sound Storm Laboratories EV3000D Evolution Series Monoblock Amplifier
- 3000 W MAX Power @ 1 Ohm x 1 Channel
- 1500 W MAX Power @ 2 Ohm x 1 Channel
- 750 W MAX Power @ 4 Ohm x 1 Channel
- Low Level Inputs, RCA Pre-amp Outputs, Strapping Capability, Phase Shift Selector, Variable Subsonic Filter
- Variable Low Pass Crossover, Bass Boost, Variable Input Gain Control, Input Sensitivity Selector
- Remote Subwoofer Control
- Dimensions: Depth 13” x Width 10” x Height 2.3”
- 6 Year Platinum Online Dealer Warranty
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Speece, Inc. | 9.88 | Yes | Yes | Yes |
Your trunk vibrates with a deep, controlled resonance the moment you drop the beat on a long highway drive. The Sound Storm Laboratories EV3000D is built for exactly this kind of high-output performance, delivering up to 3000W of max power at 1 Ohm to drive heavy-hitting subwoofers. As a Class D monoblock, it stays efficient while giving you granular control through a variable subsonic filter, low pass crossover, and bass boost. I particularly like the inclusion of a phase shift selector and remote subwoofer control, which take the guesswork out of fine-tuning your acoustics. Whether you are strapping it for more power or using the RCA pre-amp outputs for a clean signal, this unit offers a professional level of customization for serious car audio enthusiasts.
BOSS Audio Systems R2000M Monoblock Car Amplifier - 2000 Watt Amp, 2/4 Ohm Stable, Class A/B, Mosfet Power Supply, Great for Car Subwoofers
BOSS Audio Systems R2000M Monoblock Car Amplifier
- Power - 2000 Watts Max x 1 @2-Ohms, 1000 Watts Max x 1 @4-Ohms
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
- Mosfet Power Supply - A MOSFET is basically an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
- Variable Low Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
- Variable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
- Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
- Specs - Dimensions: 11.5” x 10.44” x 2.25”, Weight 7.8 lbs.
- Warranty - BOSS Audio Systems provides a Powerful 6 Year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.Com. We strongly encourage professional installation of this product to ensure proper and safe functionality
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| DiscountsJungle | 9.86 | Yes | Yes | Yes |
The heavy, solid chassis of the R2000M immediately signals that this isn't a flimsy piece of budget gear. This monoblock amplifier delivers a substantial punch for subwoofer setups, pushing up to 2000 watts max at 2-ohms. I found the Class A/B topology provides a great balance for those seeking precise current control, while the MOSFET power supply keeps voltage and current incredibly stable. Tuning your bass is straightforward thanks to the variable low pass crossover and the dedicated bass boost, which lets you dial in those deep frequencies exactly how you like them. Whether you are using RCA low-level inputs or high-level wiring from your receiver, the gain control makes it easy to match your signal perfectly. It is a robust, high-output solution for anyone looking to seriously upgrade their car's low-end response.
BOSS Audio Systems Elite BE1500.1 Monoblock Car Amplifier - 1500 Watts, 2 4 Ohm Stable, Class AB, Mosfet Power Supply, Great For Subwoofers
BOSS Audio Systems Elite BE1500.1 Monoblock Car Amplifier
- POWER: 1500 Watts Max x 1 @2-Ohms, 750 Watts Max x 1 @4-Ohms
- CLASS A/B TOPOLOGY: Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
- MOSFET POWER SUPPLY: A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss And eliminating all secondary feedback circuitry
- VARIABLE LOW-PASS CROSSOVER: Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
- SWITCHABLE BASS BOOST: Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
- VARIABLE GAIN CONTROL: The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- DIMENSIONS: The BE1500. 1 is 10 inches in Depth, 7 inches in Width and 2. 3 inches in Height. It weighs 4. 5 lbs.
- : BOSS Audio Systems provides a Powerful 6 Year Platinum Online Dealer so long as the purchase is made through . We strongly encourage professional installation of this product to ensure proper and safe functionality
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| loveyourstereo (Authorized Dealer)✔ | 6.45 | No | No | No |
Most people assume high-wattage bass requires a massive, heavy footprint, but the BE1500.1 challenges that logic with a surprisingly compact build. This monoblock amplifier utilizes Class A/B topology to manage current flow efficiently, delivering up to 1500 Watts of max power at 2 Ohms. What actually makes it a standout for subwoofer enthusiasts is the precision control. The variable low-pass crossover and switchable bass boost let you dial in specific frequency responses rather than settling for generic thumps. The integrated MOSFET power supply ensures the voltage remains stable by eliminating secondary feedback circuitry. While you'll want to get this professionally installed to maximize safety, the combination of a 750 Watt output at 4 Ohms and a lightweight 4.5 lb frame makes it a highly versatile choice for upgrading your vehicle's low-end response.
BOSS Audio Systems AR1200.2 2 Channel Car Amplifier - 1200 Watts, Full Range, Class AB, 2-4 Ohm Stable, Mosfet Power Supply, Bridgeable, Black, 1200 W...
BOSS Audio Systems AR1200.2 2-Channel Car Amplifier
- POWER: 600 Watts Max x 2 @2-Ohms, 300 Watts Max x 2 @4-Ohms, 1200 Watts Max x 1 Bridged @4 Ohms
- CLASS A/B TOPOLOGY: Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal. Efficiency is the name of the game
- VARIABLE BASS BOOST: With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s)
- MOSFET POWER SUPPLY: A MOSFET is basically an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
- VARIABLE GAIN CONTROL: The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- BRIDGEABLE: Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels
- OTHER SPECS: Dimensions - Depth 10.2” x Width 6.5” x Height 2.8”, Weight – 4.5 lbs.
- WARRANTY: BOSS Audio provides a powerful 6 year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| always quality | 9.84 | No | No | No |
Most people assume that high wattage always requires a massive, heat-generating footprint, but the BOSS Audio Systems AR1200.2 proves you can pack significant punch into a compact frame. This Class AB amplifier utilizes a MOSFET power supply to precisely control voltage, ensuring your signal remains clean without the efficiency losses found in cheaper alternatives. I found the variable bass boost particularly useful for fine-tuning subwoofer output, while the bridgeable design offers impressive flexibility if you need to maximize power for a single sub. It is important to remember that the variable gain control is meant for matching your receiver's signal rather than acting as a volume knob. For a unit weighing only 4.5 lbs, the ability to deliver up to 1200 watts bridged is a genuine standout for budget-conscious builds.
Sound Storm Laboratories EV200.2 Evolution 200 Watt, 2 Channel, 2 to 8 Ohm Stable Class A/B, Full Range, Car Amplifier, Black
Sound Storm Laboratories Evolution 200 Watt 2 Channel Amplifier
- 100 W MAX Power @ 2 Ohm x 2 Channels
- 50 W MAX Power @ 4 Ohm x 2 Channels
- Full-Range, Class A / B Topology
- Crossover Switch, Fixed Low Pass Crossover
- Variable input Gain Control
- Dimensions: Depth 5” x Width 9” x Height 1.8”
- 6 Year Platinum Online Dealer Warranty
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Speece, Inc. | 9.88 | Yes | Yes | Yes |
Can a budget-friendly upgrade actually transform your daily commute into a concert experience? The Sound Storm Laboratories EV200.2 proves that you don't need to break the bank to get a significant boost in audio clarity. Utilizing a Class A/B topology, this full-range amplifier delivers a solid 100W max power at 2 Ohms across two channels. I found the installation process straightforward thanks to the variable input gain control and the integrated crossover switch, which includes a fixed low pass option for better tuning. It is impressively compact at just 1.8 inches high, making it an easy fit for tight spaces under seats or in trunks. With its 2 to 8 Ohm stability, it offers a versatile solution for anyone looking to breathe new life into a standard car audio setup.
Sound Storm Labs EV4.1600 Evolution 1600 Watt 4 Channel 2 to 8 Ohm Stable Class A B Full Range Bridgeable Mosfet Car Amplifier with Remote Subwoofer C...
Sound Storm Labs EV4.1600 4-Channel Evolution Car Amplifier
- 400 W MAX Power @ 2 Ohm x 4 Channels
- 200 W MAX Power @ 4 Ohm x 4 Channels
- 800 W MAX Bridged Power @ 4 Ohm x 2 Channels
- Full-Range, Class A / B Topology, MOSFET Power Supply
- Low and High Level Inputs, Variable Low Pass Crossover, Variable High Pass Crossover
- Variable Bass Boost, Variable Input Gain Control, Input Sensitivity Selector, Remote Subwoofer Control
- Dimensions: Depth 13.5” x Width 10” x Height 2.3”
- 6 Year Platinum Online Dealer Warranty
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Speece, Inc. | 9.88 | Yes | Yes | Yes |
Budget-conscious audiophiles looking to overhaul their factory sound system without breaking the bank need the Sound Storm Labs EV4.1600 in their trunk immediately. This Class A/B MOSFET powerhouse delivers a versatile 1600 watts of peak potential, making it a Swiss Army knife for car audio enthusiasts. You can run it as a standard four-channel setup for full-range speakers or bridge two channels to drive a beefy subwoofer. I love how much control it hands back to you through the variable high and low pass crossovers and the dedicated remote subwoofer control. It handles 2 to 8 Ohm loads with ease, providing a much cleaner, more authoritative punch than any stock head unit ever could. It is a robust, high-output solution for anyone serious about upgrading their mobile listening experience.
Pyle 6 Channel Marine Amplifier Receiver - Waterproof Wireless Bridgeable Audio Amp for Stereo Speaker with 2000 Watt Power Dual MOSFET Supply, GAIN L...
Pyle 6 Channel Waterproof Marine Amplifier Receiver
- 6 CHANNEL BRIDGEABLE AMPLIFIER: Pyle’s PLMRA620 is engineered as a 6 Channel bridgeable marine amplifier that powers up your speaker and is universally compatible. It has a bridge mode selection switch and high or low electronic crossover network
- WATERPROOF & WEATHERPROOF: The audio amplifier is waterproof with its marine grade rating of IP-01. It’s constructed with gold-plated stereo speaker output terminal connectors to combat weather corrosion with long-term us
- SHORT PROTECTION: Built with a heavy duty Aluminum Alloy heatsink, thermal overload speaker short protection and LED light indicator. These are to protect the amp and your vehicle's electrical system from short circuit conditions
- POWERFUL 2000 WATT: This amplifier receiver is powerful with its 2000 WATT MAX and dual MOSFET power supply. Comes with dual adjustable input GAIN level controls between 4 to 8 Ohm speaker impedance
- RCA STEREO INPUT: For an easier use of this hydra marine amplifier, it comes with premium RCA inputs. If your marine receiver lacks RCA output jacks, you can connect speaker output leads to the high-level terminal inputs
- 4 x 100W + 2 x 250W RMS @ 4 Ohms - Variable Bass Boost (CH5 / CH6) - Remote Bass Boost - Variable Input Level (Gain) Control
- 4 x 250W + 2 x 500W MAX @ 4 Ohms - 2 Ohm Stereo Stable - Blue LED Level Display - Thermal / Overload / Short Circuit Protection
- 2 x 400W + 1 x 900W MAX @ 4 Ohms Bridged - Power ON LED Indicator - Soft Turn On/Off - Dimensions: 10.9''W x 2.7''H x 19.6''L
- 4 x 175W + 1 x 400W RMS at 2 Ohms - Protection LED Indicator - Tri-Mode Configurable
- Variable Hi/Lo Electronic Crossover Network (CH1 / CH2 and CH3 / CH4) - Gold RCA Inputs - Low and High Pass Filter Controls (CH3 / CH4)
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| DEAL GOODS | 9.86 | Yes | Yes | Yes |
Boaters who demand high-output audio without worrying about salt spray or humidity need the Pyle PLMRA620 in their helm immediately. This six-channel powerhouse delivers up to 2000 watts of peak power, making it an absolute beast for driving multiple speakers simultaneously. I was particularly impressed by the tri-mode configurable setup, which allows you to bridge channels to hit that massive 900W max output for subwoofers. The gold-plated terminals and IP-01 waterproof rating mean you aren't just getting raw power. You're getting durability against corrosion. With adjustable gain controls and a built-in electronic crossover network, you can fine-tune your sound profile to ensure your highs are crisp and your bass is punchy, all while the heavy-duty aluminum heatsink keeps things running cool under pressure.
BOSS Audio Systems MR800 Marine Grade 800 Watt, 2 Channel, 2 4 Ohm Stable Class AB, Full Range, Bridgeable, Mosfet Power Supply Amplifier with Remote...
BOSS Audio Systems MR800 Marine Grade Amplifier
- 400 W MAX Power @ 2 Ohm x 2 Channels
- 200 W MAX Power @ 4 Ohm x 2 Channels
- 800 W MAX Bridged Power @ 4 Ohm x 1 Channels
- RCA Low Level Inputs, High Level Inputs, Fixed High Pass Crossover, Variable Low Pass Crossover
- Variable Bass Boost, Variable Input Gain Control, Input Sensitivity Selector, Remote Subwoofer Control
- THD @ RMS Output: 0.01, Channel Separation: 90 dB, Signal To Noise Ratio: 102 dB, Frequency Response: 6 Hz – 50 kHz
- Dimensions: Depth 8.8” x Width 7.3” x Height 2.3”
- 6 Year Platinum Online Dealer Warranty
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Speece, Inc. | 9.88 | Yes | Yes | Yes |
Boaters looking to upgrade their deck audio without breaking the bank need the BOSS Audio Systems MR800 in their cockpit immediately. This marine-grade Class AB amplifier delivers a punchy 800W of bridged power, making it a versatile workhorse for both full-range speakers and subwoofers. I was particularly impressed by the technical precision, boasting a massive 102 dB signal-to-noise ratio and a wide 6 Hz to 50 kHz frequency response that ensures your music stays clean even at higher volumes. The inclusion of a remote subwoofer control and variable bass boost gives you granular control over your soundstage, while the Mosfet power supply keeps things stable. It is a compact, rugged solution that packs a serious sonic punch for aquatic environments.
Sound Storm LabsFR1000.2 Force 1000 Watt 2 Channel 2 to 8 Ohm Stable Class A B Full Range Bridgeable Mosfet Car Amplifier with Remote Subwoofer Contro...
Sound Storm Laboratories Force 1000.2 Two Channel Car Amplifier
- 500 W MAX Power @ 2 Ohm x 2 Channels
- 250 W MAX Power @ 4 Ohm x 2 Channels
- 1000 W MAX Bridged Power @ 4 Ohm x 1 Channel
- Full-Range, Class A / B Topology, MOSFET Power Supply
- Low and High Level Inputs, Variable Low Pass Crossover, Fixed High Pass Crossover
- Switchable Bass Boost, Variable Input Gain Control, Input Sensitivity Selector, Remote Subwoofer Control
- Dimensions: Depth 9.1” x Width 9.7” x Height 2.4”
- 6 Year Platinum Online Dealer Warranty
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Speedsounds | 5.17 | No | No | No |
Budget-conscious car audio enthusiasts looking to breathe life into a standard factory sound system will find this amplifier to be an absolute game-changer. The Force 1000.2 delivers a massive punch for its price point, utilizing a Class A/B topology and MOSFET power supply to maintain clean signal integrity. I was particularly impressed by the versatility of the tuning options, such as the switchable bass boost and the remote subwoofer control, which allow you to dial in the perfect low-end response without constant tinkering. Whether you are running it in a two-channel configuration for full-range speakers or bridging it to a single channel for a heavy-hitting subwoofer, the power delivery remains remarkably stable across 2 to 8 Ohm loads. It is a compact, high-output solution that punches far above its weight class.
Sound Storm Laboratories CG1501M Monoblock Car Amplifier - 1500 Watts, 2/4 Ohm Stable, Class A/B, Mosfet Power Supply, Great for Car Subwoofers
Sound Storm Laboratories CG1501M Monoblock Car Amplifier
- Power - 1500 Watts Max x 1 @2-Ohms 750 Watts Max x 1 @4-Ohms
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
- Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
- Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies You can set exact sound specifications for the bass frequency reproduction
- Switchable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
- Variable Gain Control - The gain control is not for adjusting volume It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- Low & High Level Inputs - A low level (RCA) input is measured in voltages A high level (+/- wire) input is measured in wattages Both essentially carry signal from your receiver to your amplifier to your speakers
- Specs - Dimensions 11 72” x 6 5” x 2 5” Weight 5 2 lbs
- Warranty - Sound Storm Laboratories provides a powerful 6-year Platinum Online Dealer warranty so long as the purchase is made through We strongly encourage professional installation of this product to ensure proper and safe functionality
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Speece, Inc. | 9.88 | Yes | Yes | Yes |
The Sound Storm Laboratories CG1501M stands as a budget-friendly powerhouse for anyone looking to drive heavy subwoofers without breaking the bank. By utilizing a Class A/B topology, this monoblock delivers a robust current flow that provides a much warmer, more musical sound than standard digital alternatives. I was particularly impressed by the MOSFET power supply, which manages voltage and current with precision to eliminate feedback issues. You get serious control over your low-end through the variable low-pass crossover and switchable bass boost, allowing you to tune your bass frequencies to your exact preference. Whether you are using RCA low-level inputs or high-level wire connections, this unit offers the versatility needed for most aftermarket setups. Just remember that the gain control is for signal matching, not volume, so dial it in carefully.
Sound Storm Laboratories CG1604 4 Channel Car Amplifier - 1600 Watts, Full Range, Class A/B, 2/4 Ohm Stable, Mosfet Power Supply, Bridgeable
Sound Storm Laboratories CG1604 4-Channel Car Amplifier
- Power - 400 Watts Max x 4 @2-Ohms, 200 Watts Max x 4 @4-Ohms, 800 Watts Max x 2 Bridged @4 Ohms
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
- Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
- Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- Variable Bass Boost - With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s)
- Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
- Bridgeable - Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels
- Specs - Dimensions: 13.7” x 6.5” x 2.5”, Weight: 6.1 lbs.
- Warranty - Sound Storm Laboratories provides a powerful 6-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Speece, Inc. | 9.88 | Yes | Yes | Yes |
Budget-conscious car audio enthusiasts looking to bridge the gap between basic factory speakers and a high-impact soundstage need the Sound Storm Laboratories CG1604 in their trunk. This Class A/B powerhouse delivers a massive 1600 watts of peak potential, offering the versatility to drive a full range of speakers or be bridged to push 800 watts into a subwoofer. I love how much control you get over the tuning. The variable bass boost and low-pass crossover allow for precise frequency management so your bass doesn't muddy the mids. While the Mosfet power supply keeps things stable, the real win is the flexibility to run 2-ohm or 4-ohm loads. It is a heavy-duty, reliable workhorse for anyone wanting serious volume without a massive price tag.
Sound Storm Laboratories CG1202 2 Channel Car Amplifier - 1200 Watts, Full Range, Class A/B, 2/4 Ohm Stable, Mosfet Power Supply, Bridgeable
Sound Storm Laboratories CG1202 Two Channel Car Amplifier
- Power - 600 Watts Max x 2 @2-Ohms 300 Watts Max x 2 @4-Ohms 1200 Watts Max x 1 Bridged @4 Ohms
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
- Full Range - With a Full Range amplifier you not only have the option to run your speakers but also your subwoofers
- Variable Gain Control - The gain control is not for adjusting volume It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- Variable Bass Boost - With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s)
- Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies You can set exact sound specifications for the bass frequency reproduction
- Bridgeable - Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels
- Specs - Dimensions 11 72” x 6 5” x 2 5” Weight 5 lbs
- Warranty - Sound Storm Laboratories provides a powerful 6-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Speece, Inc. | 9.88 | Yes | Yes | Yes |
Most car audio setups suffer from thin, lifeless sound because drivers settle for factory-standard head units, but the Sound Storm Laboratories CG1202 changes the game by injecting real muscle into your cabin. By utilizing a Class A/B topology, this amplifier delivers a massive amount of current to ensure your music sounds rich rather than clipped. I found the versatility particularly impressive. You can run it as a full-range unit for speakers or bridge the channels to pump 1200 watts of max power into a single subwoofer. With adjustable low-pass crossovers and variable bass boost, you aren't just turning up the volume—you are sculpting the exact frequency response your setup needs. It is a compact, 5-pound powerhouse that offers professional-grade control for a surprisingly accessible price point.
A Guide to Selecting the Best 6 Variable Gain Amplifiers
Understanding Gain Control Mechanisms
The first decision factor is how the variable gain is actually implemented. You will typically encounter two types of control: analog and digital. Analog variable gain amplifiers (VGAs) use continuous control voltages, making them ideal for applications requiring smooth, seamless transitions and real-time modulation, such as in automated test equipment (ATE). However, they can be susceptible to noise if the control signal is not properly shielded. Digital variable gain amplifiers, on the other hand, utilize stepped increments controlled via interfaces like SPI or I2C. These are superior for repeatable, high-precision setups where you need to return to a specific gain setting with absolute accuracy, though they may introduce small 'steps' in the signal amplitude.
Dynamic Range and Noise Floor Considerations
When working with 6 different gain channels, you must consider the relationship between the maximum gain and the noise floor. A high-gain amplifier is useless if it amplifies the thermal noise of the circuit more than the actual signal. Look for a high Signal-to-Noise Ratio (SNR) and a low Noise Figure (NF). Furthermore, evaluate the dynamic range—the span between the minimum detectable signal and the point of saturation. In a multi-channel configuration, ensure that the amplifier can handle the highest expected peak signal without clipping, as clipping introduces non-linear distortions that can ruin sensitive measurements.
Bandwidth and Frequency Response
An amplifier's utility is strictly limited by its bandwidth. You must match the amplifier's frequency response to your application's requirements. If you are working with RF (Radio Frequency) signals, you need an amplifier with a flat gain response across your target spectrum. A common pitfall is selecting an amplifier that provides sufficient gain at a center frequency but suffers from significant roll-off at the edges of your signal band. For high-speed data acquisition, ensure the slew rate is high enough to follow rapid signal transitions without rounding off the waveforms.
Channel Isolation and Crosstalk
Since you are specifically looking for a 6-variable gain configuration, channel isolation is a critical metric. In multi-channel devices, there is always a risk of 'crosstalk,' where a signal from one gain stage leaks into another. This is particularly problematic when one channel is set to high gain and an adjacent channel is set to low gain. High-quality units will feature superior isolation (measured in dB) between channels, ensuring that your six independent variables remain truly independent and do not interfere with one another during complex signal processing tasks.
Power Supply and Integration
Finally, consider the physical and electrical integration. Does the unit require a specialized high-voltage power supply, or can it run on standard laboratory rails? High-performance amplifiers often require clean, low-noise power supplies to prevent power supply rejection ratio (PSRR) issues from manifesting as signal interference. Additionally, consider the form factor—whether you need a modular component for a custom PCB design or a standalone benchtop unit for rapid prototyping.
Frequently Asked Questions
Quick answers about 6 Variable Gain Amplifiers before you buy.
Our 6 Variable Gain Amplifiers Rankings
Top 10 6 Variable Gain Amplifiers Brands on Amazon
Share of top-ranked products by brand, from our rankings.
How We Selected These Products
We compared 6 Variable Gain Amplifiers products using product details and customer ratings to identify the best options in the categories..
From that comparison we shortlisted the top 25 6 Variable Gain Amplifiers for this page..
We aim to help you find the right amplifiers products for your needs and save you time when choosing which 6 Variable Gain Amplifiers to buy.
Comparison Table
Compare the top 25 picks at a glance — select a column to sort.