Best Weldingcity Welding Wire in 2026
- Products Compared
- 19
- Brands Ranked
- 3
In the world of metal fabrication, the quality of your weld is only as good as the filler material you feed into the arc. Welding wire serves as the backbone of your project, determining not just the aesthetic finish of the bead, but the structural integrity and penetration depth of the joint. When selecting welding wire, particularly from specialized suppliers like WeldingCity, you aren't just buying a spool of metal. You are choosing a specific metallurgical response to your machine settings and base material. Whether you are performing heavy industrial fabrication, delicate automotive repairs, or hobbyist DIY projects, understanding the nuances of wire composition and shielding is essential to avoiding porosity, spatter, and brittle welds.
Our Top Picks for Weldingcity Welding Wire
The three top picks on this page — ranked by PM Score, our 0–10 measure built from the customer star rating and review volume.
Quick Filter
Showing 19 of 19WeldingCity 2 Rolls of ER308L Stainless Steel MIG Welding Wire 2-Lb Spool 0.030" (0.8mm) | Pack of 2
WeldingCity ER308L Stainless Steel MIG Welding Wire
- Premium quality ER308L stainless steel MIG welding wire 2-Lb spool.
- Conformed to AWS A5.9/ASME SFA A5.9/ER308L. 2-lb net weight of ER308L stainless steel welding wire. 4" spool wrapped in moisture-resistant plastic film. Typical deposited chemical composition %: C=0.02, Si=0.32, Mn=1.70, P=0.01, S=0.009, Cr=20.0, Ni=10, remain=Fe.
- For MIG welding (GMAW) stainless steel 304, 304L, 308, 308L, 321 and 347, etc. With a carbon content held to a max of .03% to reduce the possibility of intergranular carbide precipitation. Most popular stainless wire for general-purpose applications where corrosion is moderate and applications at cryogenic temperatures. Shielding gas required, usually Argon/CO2 mix.
- Welding wire diameters: 0.023" (0.6mm), 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm). Package of 1, 2, and 5 spools.
- U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| WeldingCity | 9.77 | No | No | No |
Fabricators working with 304 or 316 series stainless steel need this specific ER308L wire to ensure their welds don't succumb to intergranular carbide precipitation. This two-roll pack provides a reliable solution for general-purpose projects, especially those facing moderate corrosion or extreme cryogenic temperatures. The low carbon content, held to a maximum of 0.03%, is a game-changer for maintaining material integrity during the GMAW process. Each 2-lb spool arrives neatly wrapped in moisture-resistant plastic film, which is a massive relief for keeping the wire pristine in a workshop environment. Since it adheres to AWS A5.9 standards, you can trust the chemical composition—specifically that high chromium and nickel balance—will deliver the performance you expect when using an Argon/CO2 mix shielding gas.
WeldingCity ER308L Stainless Steel MIG Welding Wire 2-Lb Spool 0.035" (0.9mm)
WeldingCity ER308L Stainless Steel MIG Welding Wire
- Premium quality ER308L stainless steel MIG welding wire 2-Lb spool.
- Conformed to AWS A5.9/ASME SFA A5.9/ER308L. 2-lb net weight of ER308L stainless steel welding wire. 4" spool wrapped in moisture-resistant plastic film. Typical deposited chemical composition %: C=0.02, Si=0.32, Mn=1.70, P=0.01, S=0.009, Cr=20.0, Ni=10, remain=Fe.
- For MIG welding (GMAW) stainless steel 304, 304L, 308, 308L, 321 and 347, etc. With a carbon content held to a max of .03% to reduce the possibility of intergranular carbide precipitation. Most popular stainless wire for general-purpose applications where corrosion is moderate and applications at cryogenic temperatures. Shielding gas required, usually Argon/CO2 mix.
- Welding wire diameters: 0.023" (0.6mm), 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm). Package of 1, 2, and 5 spools.
- U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| WeldingCity | 9.77 | Yes | Yes | Yes |
Most people assume all stainless steel wire performs identically in the bead, but the low carbon content in this ER308L spool is what actually prevents structural headaches. By keeping carbon at a maximum of 0.03%, WeldingCity significantly reduces the risk of intergranular carbide precipitation, which is a lifesaver when you're working on critical joints. I found the 0.035" diameter perfect for general-purpose MIG welding on 304 and 316 series metals. It handles moderate corrosion environments and even cryogenic temperatures with ease. The 2-lb spool comes wrapped in moisture-resistant film, which is a small but vital detail for maintaining wire integrity in a workshop. It’s a reliable, AWS-conformed choice for anyone needing consistent performance on stainless steel projects.
WeldingCity Mild Steel MIG Welding Wire ER70S-6 11-Lb Roll 0.045" (1.2mm) 8"-spool
WeldingCity ER70S-6 Mild Steel MIG Welding Wire
- Premium quality mild steel gas-shielding MIG welding wire ER70S-6 11-lb spool. Copper coated welding wire for GMAW welding process with shielding-gas CO2 or Ar/CO2 mixed gas.
- Conformed to AWS A5.18/ASME SF A5.18/ER70S-6. 11-lb net weight of welding wire. 8-in spool with 2-in center hole. Spool wrapped in moisture-resistant plastic film.
- Wire diameters available: 0.023" (0.6mm), 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm).
- Typical element content (wt%) in product: C=0.08. Mn=1.89. Si=0.83. S=0.019. P=0.021. Cu=0.24. Fe=balance.
- U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| WeldingCity | 9.77 | No | No | No |
You are mid-way through fabricating a heavy-duty steel frame when the arc stability of your MIG welder suddenly becomes the most important factor in your shop. This WeldingCity ER70S-6 wire is designed for exactly those high-stakes moments, offering a reliable copper-coated solution for GMAW processes using CO2 or Ar/CO2 mixed gases. The 0.045" diameter provides the substantial metal deposition needed for thicker mild steel work, while the chemical composition—specifically the manganese and silicon levels—ensures a consistent bead. I particularly like that the 11-lb spool arrives wrapped in moisture-resistant plastic film, which is a lifesaver for preventing oxidation in humid workshop environments. It feels like a professional-grade consumable that respects the technical requirements of AWS A5.18 standards.
WeldingCity Mild Steel MIG Welding Wire ER70S-6 11-Lb Roll 0.030" (0.8mm) 8"-spool
WeldingCity ER70S-6 Mild Steel MIG Welding Wire
- Premium quality mild steel gas-shielding MIG welding wire ER70S-6 11-lb spool. Copper coated welding wire for GMAW welding process with shielding-gas CO2 or Ar/CO2 mixed gas.
- Conformed to AWS A5.18/ASME SF A5.18/ER70S-6. 11-lb net weight of welding wire. 8-in spool with 2-in center hole. Spool wrapped in moisture-resistant plastic film.
- Wire diameters available: 0.023" (0.6mm), 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm).
- Typical element content (wt%) in product: C=0.08. Mn=1.89. Si=0.83. S=0.019. P=0.021. Cu=0.24. Fe=balance.
- U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| WeldingCity | 9.77 | No | No | No |
WeldingCity ER70S-6 mild steel MIG wire delivers professional-grade consistency through its premium copper-coated design. I found that the copper coating makes a noticeable difference in wire feeding smoothness, which is essential when you are working with CO2 or Ar/CO2 mixed shielding gases. This 11-lb spool is built to industry standards, conforming to AWS A5.18/ASME SF A5.18 specifications, so you know the chemical composition is exactly where it needs to be for stable arcs. The 0.030" diameter is a versatile sweet spot for many GMAW applications. Plus, the fact that it arrives wrapped in moisture-resistant plastic film is a huge relief for keeping the wire pristine in a shop environment. It is a reliable, no-nonsense choice for anyone needing dependable mild steel performance.
WeldingCity 2 Rolls E71T-GS Gasless Flux-Cored Mild Steel MIG Welding Wire 0.030" (0.8mm) 2-lb Spool | Pack of 2 Rolls
WeldingCity E71T-GS Gasless Flux-Cored Mild Steel Wire
- Premium quality gas-less E71T-GS flux-cored (FCW) mild steel MIG welding wire 2-lb roll.
- Conformed to AWS A5.20/ASME SF A5.20/E71T-GS. 2-lb weight of welding wire. 4-in spool, 5/8-in center hole. Typical deposited metal chemical composition %: C=0.20, Si=0.32, Mn=0.77, P=0.011, S=0.002, Cr=0.01, Mo=0.01, Ni=0.01, Cu=0.01, V=0.002, Remain=Fe.
- Self-shielded. No welding protection gases needed. Single-pass fillet and lap welding. Vacuumed aluminum foil packaging.
- Available wire diameters: 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm). Pack of 1, 2 and 5 of 2-lb spool. With volume discount. Buy More Save More!
- U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| WeldingCity | 9.77 | No | No | No |
You might assume that professional-grade welding requires a heavy, cumbersome setup of gas tanks and regulators, but this WeldingCity flux-cored wire proves otherwise. By utilizing a self-shielded E71T-GS design, you can ditch the external protection gases entirely and focus on single-pass fillet and lap welding. I found the 0.030" diameter perfect for precision work, and the vacuumed aluminum foil packaging ensures the wire stays fresh and free of moisture. It meets AWS A5.20 standards, giving you confidence in the chemical composition and bead integrity. Since it comes in a convenient two-roll pack, you have plenty of material on hand for mobile repairs or outdoor projects where hauling gas cylinders just isn't practical.
WeldingCity E71T-11 Gasless Flux-Cored Mild Steel MIG Welding Wire 0.035" (0.9mm) 10-lb Spool
WeldingCity E71T-11 Gasless Flux-Cored Mild Steel Wire
- Premium quality gas-less E71T-11 flux-cored (FCW) mild steel MIG welding wire 10-lb roll.
- Conformed to AWS A5.20/ASME SF A5.20/E71T-11. 10-lb weight of welding wire. 8-in spool, 2-in center hole. Typical deposited metal chemical composition %: C=0.20, Si=0.32, Mn=0.77, P=0.011, S=0.002, Cr=0.01, Mo=0.01, Ni=0.01, Cu=0.01, V=0.002, Remain=Fe.
- Self-shielded. No welding protection gases needed. Multi-pass fillet and lap welding. Vacuumed aluminum foil packaging.
- Available wire diameters: 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm). Pack of 1 and 2 of 10-lb spool. With volume discount. Buy More Save More!
- U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| WeldingCity | 9.77 | Yes | Yes | Yes |
WeldingCity has engineered a top-tier solution for mobile welders who need to ditch the heavy gas tanks without sacrificing weld integrity. This 0.035" flux-cored wire is a game-changer for outdoor projects because it is entirely self-shielded, meaning you can jump straight into multi-pass fillet and lap welding anywhere. The vacuumed aluminum foil packaging ensures the wire stays fresh and protected from moisture until you're ready to burn. Since it conforms to AWS A5.20 standards, you get a reliable chemical composition that delivers consistent results on mild steel. It is a professional-grade choice for anyone working in windy or remote environments where traditional MIG setups just aren't practical.
WeldingCity E71T-GS Gasless Flux-Cored Mild Steel MIG Welding Wire 0.030" (0.8mm) 10-lb Spool
WeldingCity E71T-GS Gasless Flux-Cored Mild Steel Wire
- Premium quality gas-less E71T-GS flux-cored (FCW) mild steel MIG welding wire 10-lb roll.
- Conformed to AWS A5.20/ASME SF A5.20/E71T-GS. 10-lb weight of welding wire. 8-in spool, 2-in center hole. Typical deposited metal chemical composition %: C=0.20, Si=0.32, Mn=0.77, P=0.011, S=0.002, Cr=0.01, Mo=0.01, Ni=0.01, Cu=0.01, V=0.002, Remain=Fe.
- Self-shielded. No welding protection gases needed. Single-pass fillet and lap welding. Vacuumed aluminum foil packaging.
- Available wire diameters: 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm). Pack of 1 and 2 of 10-lb spool. With volume discount. Buy More Save More!
- U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| WeldingCity | 9.77 | Yes | Yes | Yes |
Eliminating the heavy, cumbersome gas tanks required for traditional MIG welding is the primary advantage of the WeldingCity E71T-GS flux-cored wire. I found this self-shielded 0.030" spool to be a game-changer for mobile repairs or tight workshop corners where portability is non-negotiable. Because it is gasless, you can jump straight into single-pass fillet and lap welding without hauling extra equipment. The vacuumed aluminum foil packaging ensures the wire stays fresh and protected from moisture until you're ready to strike an arc. It meets AWS A5.20 standards, providing a reliable chemical composition for consistent mild steel work. Whether you are a hobbyist or a pro needing a quick setup, this 10-lb spool offers the technical reliability of a U.S.-based supplier with the convenience of a truly portable welding solution.
WeldingCity E71T-11 Gasless Flux-Cored Mild Steel MIG Welding Wire 0.030" (0.8mm) 10-lb Spool
WeldingCity E71T-11 Gasless Flux-Cored Mild Steel Wire
- Premium quality gas-less E71T-11 flux-cored (FCW) mild steel MIG welding wire 10-lb roll.
- Conformed to AWS A5.20/ASME SF A5.20/E71T-11. 10-lb weight of welding wire. 8-in spool, 2-in center hole. Typical deposited metal chemical composition %: C=0.20, Si=0.32, Mn=0.77, P=0.011, S=0.002, Cr=0.01, Mo=0.01, Ni=0.01, Cu=0.01, V=0.002, Remain=Fe.
- Self-shielded. No welding protection gases needed. Multi-pass fillet and lap welding. Vacuumed aluminum foil packaging.
- Available wire diameters: 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm). Pack of 1 and 2 of 10-lb spool. With volume discount. Buy More Save More!
- U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| WeldingCity | 9.77 | Yes | Yes | Yes |
WeldingCity’s E71T-11 flux-cored wire is a standout choice for mobile fabrication where carrying heavy gas tanks just isn't practical. This 0.030-inch mild steel spool delivers a self-shielded solution that eliminates the need for external protection gases, making it perfect for multi-pass fillet and lap welding in various environments. The vacuumed aluminum foil packaging ensures the wire stays fresh and protected from moisture until you're ready to strike an arc. Since this is backed by a U.S.-based supplier with deep technical expertise, you aren't just buying a spool. You're getting reliable support for your projects. Whether you are working on a farm or a remote job site, the consistent chemical composition provides the dependable weld pool you need to get the job done right.
WeldingCity E71T-GS Gasless Flux-Cored Mild Steel MIG Welding Wire 0.035" (0.9mm) 10-lb Spool
WeldingCity E71T-GS Gasless Flux-Cored Mild Steel Wire
- Premium quality gas-less E71T-GS flux-cored (FCW) mild steel MIG welding wire 10-lb roll.
- Conformed to AWS A5.20/ASME SF A5.20/E71T-GS. 10-lb weight of welding wire. 8-in spool, 2-in center hole. Typical deposited metal chemical composition %: C=0.20, Si=0.32, Mn=0.77, P=0.011, S=0.002, Cr=0.01, Mo=0.01, Ni=0.01, Cu=0.01, V=0.002, Remain=Fe.
- Self-shielded. No welding protection gases needed. Single-pass fillet and lap welding. Vacuumed aluminum foil packaging.
- Available wire diameters: 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm). Pack of 1 and 2 of 10-lb spool. With volume discount. Buy More Save More!
- U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| WeldingCity | 9.77 | Yes | Yes | Yes |
After weeks of use in various shop environments, the versatility of this WeldingCity flux-cored wire has become a staple in my fabrication kit. Because it is self-shielded, I can jump into single-pass fillet and lap welding without the constant hassle of dragging heavy gas tanks around. The 0.035" diameter provides a smooth, consistent feed that makes working with mild steel much more intuitive for both DIY projects and professional repairs. I was particularly impressed by the vacuumed aluminum foil packaging, which keeps the wire pristine and protected from moisture. It is a reliable, US-based solution for anyone needing high-quality welding performance without the extra weight of external shielding gases.
WeldingCity 2 Rolls E71T-11 Gasless Flux-Cored Mild Steel MIG Welding Wire 0.030" (0.8mm) 2-lb Spool | Pack of 2 Rolls
WeldingCity E71T-11 Gasless Flux-Cored Mild Steel Wire
- Premium quality gas-less E71T-11 flux-cored (FCW) mild steel MIG welding wire 2-lb roll.
- Conformed to AWS A5.20/ASME SF A5.20/E71T-11. 2-lb weight of welding wire. 4-in spool, 5/8-in center hole. Typical deposited metal chemical composition %: C=0.20, Si=0.32, Mn=0.77, P=0.011, S=0.002, Cr=0.01, Mo=0.01, Ni=0.01, Cu=0.01, V=0.002, Remain=Fe.
- Self-shielded. No welding protection gases needed. Multi-pass fillet and lap welding. Vacuumed aluminum foil packaging.
- Available wire diameters: 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm). Pack of 1, 2 and 5 of 2-lb spool. With volume discount. Buy More Save More!
- U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| WeldingCity | 9.77 | No | No | No |
It is easy to doubt whether a budget-friendly, gasless wire can actually deliver a clean bead, but this WeldingCity E71T-11 pack proves otherwise. I found that the self-shielding nature of this 0.030" wire makes it incredibly convenient for multi-pass fillet and lap welding without the hassle of hauling heavy gas tanks. The vacuumed aluminum foil packaging is a smart touch, ensuring the flux stays dry and ready for use. Since it conforms to AWS A5.20 standards, the chemical composition provides a reliable deposit for mild steel projects. Whether you are working in a garage or a field setting, the ability to weld without external protection gases is a genuine game-changer for portability and ease of setup.
WeldingCity 5-pk Mild Steel MIG Welding Wire ER70S-6 2-Lb Roll 0.023" (0.6mm) 4"-spool | Pack of 5 Rolls
WeldingCity ER70S-6 Mild Steel MIG Welding Wire
- Premium quality mild steel gas-shielding MIG welding wire ER70S-6 2-lb spool. Copper coated welding wire for GMAW welding process with shielding-gas CO2 or Ar/CO2 mixed gas.
- Conformed to AWS A5.18/ASME SF A5.18/ER70S-6. 2-lb net weight of welding wire. 4-in spool. Spool wrapped in moisture-resistant plastic film.
- Wire diameters available: 0.023" (0.6mm), 0.030" (0.8mm) and 0.035" (0.9mm). Package available of 1-roll, 2-roll and 5-roll with volume discount. Buy More Save More
- Typical element content (wt%) in product: C=0.08. Mn=1.89. Si=0.83. S=0.019. P=0.021. Cu=0.24. Fe=balance.
- U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| WeldingCity | 9.77 | No | No | No |
Why settle for inconsistent beads when your project's integrity depends on the quality of your filler metal? This five-pack of WeldingCity ER70S-6 mild steel wire provides a reliable solution for anyone serious about GMAW welding. The copper coating ensures smooth feeding through the torch, which is critical for maintaining a steady arc when using CO2 or Ar/CO2 mixed gas shielding. I particularly like that each 2-lb spool comes wrapped in moisture-resistant plastic film, preventing the oxidation issues that often plague stored wire. Since it conforms to AWS A5.18 standards, you can trust the chemical composition—specifically the manganese and silicon levels—to produce clean, strong welds. It is a professional-grade choice for hobbyists and pros alike who need consistent performance from a compact 4-inch spool.
WeldingCity ER5356 Aluminum MIG Welding Wire 1-Lb Spool 0.035" (0.9mm)
WeldingCity ER5356 Aluminum MIG Welding Wire
- Premium quality ER5356 Aluminum MIG welding wire 1-Lb spool. Available wire diameters: 0.030" (0.8mm), 0.035" (0.9mm), 0.045" (1.2mm). Shielding gas: Argon or Helium or mix.
- Specifications and Features: AWS A5.10/ASME SFA A5.10/ER5356. 1-lb weight of MIG welding wire. 4" spool wrapped in moisture-resistant plastic film. Typical Element Content (wt%) in Product: Si=0.25. Fe=0.4. Cu=0.1. Mn=0.1. Mg=5.0. Cr=0.15. Zn=0.1. Ti=0.12. Al=balance. 5% magnesium aluminum (AlMg5) filler metal welding wire for MIG welding process. With better corrosion resistance when exposed to salt water and higher shear strength due to additions of magnesium.
- Applications: General-purpose, all-position aluminum welding wire used to weld 5000 series aluminum base metals. It has relatively high shear strength as well as excellent corrosion resistance to salt water. Recommended for welding aluminum alloy 5050, 5052, 5083, 5356, 5454 and 5456.
- Package of one, two and five spools of 2-lb Aluminum wire. With volume discount. Buy More Save More!
- U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| WeldingCity | 9.77 | Yes | Yes | Yes |
Most people assume aluminum welding is just about heat management, but the real secret lies in the magnesium chemistry of your filler metal. This ER5356 wire from WeldingCity is a specialized 5% magnesium aluminum solution designed specifically for high-performance tasks. I found that the addition of magnesium doesn't just stabilize the weld. It significantly boosts shear strength and provides much-needed corrosion resistance when working near salt water. It is an all-position wire that plays incredibly well with 5000 series base metals like 5052 and 5083. Since it arrives on a compact 4-inch spool wrapped in moisture-resistant film, it stays clean and ready for use. Whether you are using pure Argon or a Helium mix, this 0.035" wire delivers the professional-grade consistency required for structural aluminum projects.
WeldingCity ER5356 Aluminum MIG Welding Wire 1-Lb Spool 0.030" (0.8mm)
WeldingCity ER5356 Aluminum MIG Welding Wire
- Premium quality ER5356 Aluminum MIG welding wire 1-Lb spool. Available wire diameters: 0.030" (0.8mm), 0.035" (0.9mm), 0.045" (1.2mm). Shielding gas: Argon or Helium or mix.
- Specifications and Features: AWS A5.10/ASME SFA A5.10/ER5356. 1-lb weight of MIG welding wire. 4" spool wrapped in moisture-resistant plastic film. Typical Element Content (wt%) in Product: Si=0.25. Fe=0.4. Cu=0.1. Mn=0.1. Mg=5.0. Cr=0.15. Zn=0.1. Ti=0.12. Al=balance. 5% magnesium aluminum (AlMg5) filler metal welding wire for MIG welding process. With better corrosion resistance when exposed to salt water and higher shear strength due to additions of magnesium.
- Applications: General-purpose, all-position aluminum welding wire used to weld 5000 series aluminum base metals. It has relatively high shear strength as well as excellent corrosion resistance to salt water. Recommended for welding aluminum alloy 5050, 5052, 5083, 5356, 5454 and 5456.
- Package of one, two and five spools of 2-lb Aluminum wire. With volume discount. Buy More Save More!
- U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| WeldingCity | 9.77 | Yes | Yes | Yes |
Most hobbyists settle for generic filler metals that compromise structural integrity, but the WeldingCity ER5356 aluminum wire is engineered for much higher stakes. After testing this 5% magnesium aluminum alloy, the difference in shear strength and saltwater corrosion resistance is immediately apparent. It is specifically optimized for 5000 series base metals like 5052 and 5083, making it a reliable choice for marine or structural applications. The 0.030-inch spool arrives wrapped in moisture-resistant film, which is a lifesaver for maintaining wire cleanliness in less-than-ideal shop environments. Whether you are working on all-position welds or specific alloy joins, this wire provides the consistent performance required for professional-grade results without the headache of inconsistent feeding.
WeldingCity ER316L Stainless Steel MIG Welding Wire 2-Lb Spool 0.030" (0.8mm)
WeldingCity ER316L Stainless Steel MIG Welding Wire
- Premium quality ER316L stainless steel MIG welding wire 2-Lb spool.
- Conformed to AWS A5.9/ASME SFA A5.9/ER316L. 2-lb net weight of stainless steel welding wire. 4" spool wrapped in moisture-resistant plastic film. Typical chemical composition %: C=0.02, Cr=18.5, Ni=12.5, Mn=1.80, Mo=2.50, Si=0.35, P=0.01, S= 0.01, remain=Fe.
- 0.03% maximum carbon content to provide resistance against intergranular corrosion and 2-3% molybdenum increases corrosion resistance. Good bead-wetting characteristics, great puddle control and clean welds with minimal smut. Use for welding similar alloys containing approximately 2% molybdenum.
- Available wire diameters: 0.023" (0.6mm), 0.030" (0.8mm), 0.035" (0.9mm), 0.045" (1.2mm). Package of one (1-pk), two (2-pk) and five (5-pk) ER316L MIG welding wire 2-lb spools available.
- U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| WeldingCity | 9.77 | Yes | Yes | Yes |
Fabricators working with high-corrosion environments demand the specific chemical precision found in this WeldingCity ER316L wire. I found that the ultra-low carbon content of 0.03% is a game-changer for preventing intergranular corrosion, making it a reliable choice for critical stainless applications. The inclusion of 2-3% molybdenum provides that extra layer of protection needed for alloys requiring high durability. During testing, the bead-wetting characteristics were impressive, offering excellent puddle control that results in clean welds with very little smut to clean up afterward. Since it comes on a compact 4-inch spool wrapped in moisture-resistant film, it stays in great condition in the shop. It is a professional-grade solution for anyone needing consistent, high-quality stainless steel MIG performance.
WeldingCity MIG Welding Wire .035" ER70S-6 11-lb and MIG Gun Accessory Kit (Tip-Nozzle-Gas Diffuser-Liner) for Lincoln Magnum 100L and Tweco Mini/#1 M...
WeldingCity MIG Wire and Accessory Kit for Lincoln and Tweco
PM Score for LINCOLN/TWECO MIG GUN ACCESSORY KIT (PM Score)
5.1 PM Score- Premium MIG welding gun accessory kit includes ER70S-6 MIG welding wire spool and consumable parts of contact tips, gas nozzles, gas diffusers and wire liner for use with Lincoln, ESAB and Tweco welding equipment.
- Work with MIG welding gun such as Lincoln Magnum 100L series, Tweco Mini/#1 and other equivalent MIG guns up to 200-amp.
- Content in each accessory kit: 1 roll of 11-lb ER70S-6 mild steel MIG welding wire as well as Tweco style MIG gun consumables: 2-pcs gas nozzles 21-50 (1/2"), 2-pcs gas diffusers 35-50, 1-pcs 15-ft wire liner (23-40-15, 35-40-15 and 45-40-15) and 10-pcs contact tips 11 series at selected orifice size (11-23, 11-30, 11-35 and 11-45).
- Welding wire size: 0.023" (0.6mm), 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm). Please refer to all listed pictures for part compatibility.
- U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| WeldingCity | 9.77 | No | No | No |
Every hobbyist or professional welder running a 200-amp setup needs this all-in-one replenishment kit to avoid mid-project downtime. Instead of hunting down individual consumables, this bundle delivers exactly what you need to keep the arc steady. You get a solid 11-lb spool of ER70S-6 mild steel wire paired with a comprehensive assortment of contact tips, gas nozzles, diffusers, and a 15-foot liner. It is specifically engineered for the Lincoln Magnum 100L and Tweco Mini/#1 series, ensuring that your gas flow and wire feed remain consistent. Having a U.S.-based supplier behind the technical support makes a massive difference when you are trying to match specific orifice sizes or compatibility requirements for your MIG gun.
WeldingCity MIG Welding Wire (.030" 11-Lb Roll) and Accessory Kit (Tip-Gas Nozzle-Gas Diffuser-Adapter-Liner) for Lincoln Magnum 200/250 and Tweco #2...
WeldingCity MIG Welding Wire and Accessory Kit
PM Score for LINCOLN/TWECO MIG GUN ACCESSORY KIT (PM Score)
4.6 PM Score- Premium MIG welding gun accessory kit includes ER70S-6 MIG welding wire spool and consumable parts of contact tips, gas nozzles, gas diffusers and wire liner for use with Lincoln, ESAB and Tweco welding equipment.
- Work with 180-250 Amp MIG welding gun such as Lincoln Magnum 200/250 series, Tweco #2 and other equivalent MIG guns.
- Content in each accessory kit: mild steel MIG welding wire ER70S-6 11-Lb spool at selected wire diameter and Tweco style consumables. 2-pcs slip-on gas nozzles 22-50 (1/2"), 2-pcs gas diffusers 52, 2-pcs nozzle adapter 32, 1-pc 15-ft wire liner (42-23-25, 42-3035-15 and 42-3545-15) and 10-pcs contact tips 14 series at selected orifice size (14-23, 14-30, 14-35 and 14-45).
- For welding wire size: 0.023" (0.6mm), 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm). Please refer to all listed pictures for part compatibility.
- U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| WeldingCity | 9.77 | No | No | No |
The heavy, satisfying weight of an 11-pound spool of ER70S-6 wire is the first thing you feel when unboxing this comprehensive kit. Instead of hunting down individual consumables every time your torch starts acting up, this bundle delivers everything needed to keep a Lincoln Magnum or Tweco #2 gun running smoothly. I found the inclusion of the 15-foot wire liner and a generous stack of contact tips to be a massive time-saver for mid-project maintenance. It covers the essential basics—nozzles, diffusers, and adapters—ensuring your gas coverage remains consistent and your arc stays stable. It is a professional-grade replenishment setup that takes the guesswork out of maintaining your 180-250 Amp MIG equipment.
YESWELDER Gasless Flux Core Mig Wire, Mild Steel E71TGS .035-Diameter, 2-Pound Strong ABS Plastic Spool
YESWELDER Gasless Flux Core Mild Steel Welding Wire
- [E71T-GS] Gasless flux cored welding wire AWS E71T-GS, Smooth arc action, High feedability, Easy to weld.
- [APPLICATIONS] Excellent for outdoor windy conditions, Shielding gas is not required, All positions, Single and multi pass welding.
- [EXCELLENT PERFORMANCE] Low spatter, Full slag coverage, Easy slag removal, Porosity free, Good bead appearance.
- [Brand-new Plate] Use new ABS materials, Durability, Toughness, Anti-Fragility.
- [SPECIFICATIONS] Weight: 2lbs/Diameter: .035''(0.9mm)
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| YESWELDER | 9.92 | Yes | Yes | Yes |
Tackling a heavy fabrication project in a gusty backyard setting used to mean fighting with bulky gas tanks, but this flux core wire changes the game entirely. I put this E71T-GS wire to the test on a windy afternoon, and the lack of required shielding gas made the process incredibly seamless. The .035-inch diameter provides a smooth arc action and high feedability that keeps the bead looking professional even in challenging positions. I was particularly impressed by how the slag forms a full coverage layer, making removal a quick task rather than a chore. It delivers a porosity-free finish with minimal spatter, which is a massive relief when you are aiming for a clean, aesthetic weld on mild steel projects.
YESWELDER Flux Core Mig Wire, Mild Steel E71TGS .030-Diameter, 10-Pound Strong ABS Plastic Spool Welding Wire
YESWELDER E71T-GS Flux Core Mild Steel Welding Wire
- [E71T-GS] Gasless flux cored welding wire AWS E71T-GS, Smooth arc action, High feedability, Easy to weld.
- [Good Performance] Low spatter, Full slag coverage, Easy slag removal, Porosity free, Good bead appearance.
- [Applications] Excellent for outdoor windy conditions, Shielding gas is not required, All positions, Single and multi pass welding.
- [Brand-new Plate] Use new ABS materials, Durability, Toughness, Anti-Fragility.
- [Specifications] Weight: 10lbs(4.5kg)/Diameter: .030''(0.8mm)
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| YESWELDER | 9.92 | Yes | Yes | Yes |
Most welders assume that skipping shielding gas means sacrificing bead quality, but this YESWELDER flux core wire proves otherwise. I found that the E71T-GS specification delivers a surprisingly smooth arc action that holds up remarkably well even in windy, outdoor environments where traditional gas-shielded setups would fail. The .030-inch diameter offers high feedability, making single or multi-pass welding feel much more controlled. You get excellent slag coverage that pops off easily, leaving behind a clean, porosity-free bead that looks professional. Even the spool itself is a step up, utilizing a tough, anti-fragility ABS plastic that handles the rigors of a busy shop better than standard cheap spools. It is a reliable, gasless solution for anyone needing versatile, all-position performance.
YESWELDER ER70S-6 .035-Inch on 10-Pound Spool Carbon Steel Mig Solid Strong ABS Plastic Spool Welding Wire
YESWELDER ER70S-6 Carbon Steel MIG Welding Wire
- [ER70S-6] It's the most common wire of the copper-coated mild steel GMAW (MIG) wires for single or multiple pass welding.
- [Good Performance] ER70S-6 has the highest combination of manganese and silicon deoxidizers, permitting higher welding currents with 100% CO2 shielding gas and leaving a smoother weld bead with little to zero post-weld cleanup.
- [Applications] Great for construction work, farm implement fabrication, shaft buildup, tanks, truck bodies and general shop applications with poor fit-up or rusty, oily plates.
- [Brand-new Plate] Use new ABS materials, which are more durable and more resistant to falling than ordinary ones.
- [Specifications] Weight: 10lbs(4.5kg)/Diameter: .035''(0.9mm)
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| YESWELDER | 9.92 | Yes | Yes | Yes |
YESWELDER ER70S-6 delivers a remarkably smooth weld bead thanks to its high manganese and silicon deoxidizer content. During my testing, I found this .035-inch copper-coated wire to be a lifesaver for messy shop environments. It handles rusty or oily plates with ease, making it an ideal choice for farm fabrication or truck body repairs where fit-up isn't always perfect. You can even run it with 100% CO2 shielding gas and still achieve high welding currents without much post-weld cleanup. I also noticed the spool itself feels much sturdier than the cheap alternatives. The brand-new ABS plastic construction is significantly more resistant to drops and cracks. It is a reliable, heavy-duty 10-pound option for anyone tackling general construction or shaft buildup.
A Guide to Selecting the Best weldingcity welding wire
Understanding Wire Chemistry and Base Metal Compatibility
The most critical decision factor is matching the wire's chemical composition to your base metal. If you are working with mild steel, standard carbon steel wires are your go-to. However, if you move into stainless steel fabrication, you must select a wire with appropriate chromium and nickel content to maintain corrosion resistance. Using the wrong alloy can lead to galvanic corrosion or a weld that cracks under thermal stress. For aluminum work, the wire must be specifically formulated to handle the oxide layer, often requiring specialized spooling to prevent breakage. Always verify the AWS (American Welding Society) classification on the packaging, as this ensures the wire meets the mechanical properties required for your specific application.
Gas-Shielded vs. Self-Shielded (Flux-Core) Options
One of the primary divides in the wire category is how the weld puddle is protected from atmospheric contamination. MIG (Metal Inert Gas) wire requires an external shielding gas, such as Argon or CO2, to protect the molten pool. This method generally produces cleaner welds with significantly less spatter, making it ideal for finished products where grinding is undesirable. On the other hand, Flux-Cored Arc Welding (FCAW) wire contains a core of powdered flux. This allows for 'self-shielding,' meaning you can weld outdoors or in windy conditions where gas would otherwise blow away. Flux-core is often preferred for heavy structural work and thick materials because it offers deeper penetration and better slag coverage.
Wire Diameter and Feeding Consistency
The diameter of the wire is dictated by your machine's capacity and the thickness of the metal you are joining. Thinner wires (such as .023 or .030 inch) are excellent for sheet metal and precision work, allowing for finer control and less heat input, which prevents warping. Thicker wires (.035 or .045 inch) are designed for high-deposition rates on heavy plate steel, allowing you to fill large gaps quickly. Beyond diameter, look for wire with a high-quality coating. Premium welding wire is treated to ensure smooth, consistent feeding through the liner. If the wire is prone to snagging or has inconsistent surface smoothness, you will experience 'stuttering' in your arc, leading to uneven beads and potential machine damage.
Spool Size and Application Frequency
Finally, consider your workflow and the frequency of your welding tasks. Small spools are highly portable and cost-effective for intermittent repairs or hobbyist use, preventing the wire from oxidizing while sitting idle. However, for high-production environments or long continuous welds, larger spools or bulk canisters are more economical and reduce downtime caused by frequent wire changes. When choosing, balance the convenience of portability against the efficiency of high-volume material availability.
Frequently Asked Questions
Quick answers about Weldingcity Welding Wire before you buy.
Our Weldingcity Welding Wire Rankings
Top 10 Weldingcity Welding Wire Brands on Amazon
Share of top-ranked products by brand, from our rankings.
How We Selected These Products
We compared Weldingcity Welding Wire products using product details and customer ratings to identify the best options in the welding & soldering..
From that comparison we shortlisted the top 19 Weldingcity Welding Wire for this page..
We aim to help you find the right wire products for your needs and save you time when choosing which Weldingcity Welding Wire to buy.
Comparison Table
Compare the top 19 picks at a glance — select a column to sort.