Brand Buying Guide

Best Zpfll in 2026

5.7 PM Score
Products Compared
95
Avg PM Score
5.4
Editor's Choice

Our Top Picks for Zpfll

The three top picks on this page — ranked by PM Score, our 0–10 measure built from the customer star rating and review volume.

Our guides are compiled from product information and customer ratings. If you click on links we provide, we may receive compensation.

ZPFLL Magneto Flywheel Puller Tool 24mm 27mm and 20mm 24mm Clutch Hub Lock Nut Tool Spanner Socket Wrench for Motorcycle ATV Dirt Bike Scooter Repair...

ZPFLL Magneto Flywheel and Clutch Lock Tool Set

ZPFLL TL0103 3.94 X 1.18 X 1.77 Inches

PM Score for ZPFLL (PM Score)

5.7 PM Score
Buy on Amazon
  • Fits for GY6 50CC 125CC 150CC Yamaha Honda Suzuki KTM ATV scooter Motorcycle ATV Dirt Bike Go Kart Pit Bike 4 Wheeler
  • Magneto flywheel puller with 2 sizes: 24mm&27mm
  • Clutch lock tool Inner Diameter(upper): 20mm. Inner Diameter(under): 24mm
  • Package includes:1×Magneto Flywheel Puller, 1×Clutch lock tool, please check it
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
ZPFLL Autopart 6.32 Yes Yes Yes

This ZPFLL specialty tool kit provides an essential two-piece solution for anyone tackling engine maintenance on small-displacement motorized vehicles. Whether you are working on a GY6 scooter, a dirt bike, or a pit bike, having both a magneto flywheel puller and a clutch hub lock nut spanner saves a massive amount of frustration during teardowns. The set is specifically engineered for versatility, offering 24mm and 27mm flywheel puller options alongside a clutch lock tool featuring a 20mm upper and 24mm lower inner diameter. It covers a wide range of popular brands including Honda, Yamaha, Suzuki, and KTM, making it a practical addition to any ATV or go-kart repair kit. Instead of struggling with improvised methods, these dedicated sockets ensure you can access the clutch and flywheel without damaging your engine components.

What We Like
Two-piece tool set
Fits GY6 engines
Dual flywheel sizes
Clutch lock included
Versatile vehicle compatibility

Lisle 22100 Flywheel Locking Tool for 6.6L Duramax

Lisle Flywheel Locking Tool for 6.6L Duramax

LISLE 22100 4.00 X 3.00 X 3.00 Inches 1.45 Pounds

PM Score for LISLE (PM Score)

9.9 PM Score
Buy on Amazon
  • Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions
  • Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement
  • Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and retorque on installation
  • Package dimension is 4.5 inches width by 5 inches height by 2 inches depth
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68 Yes Yes Yes

Most mechanics assume that removing a starter is the only way to access certain engine components, but this tool completely flips that logic on its head. When you are tackling a harmonic balancer removal on a 6.6L Duramax with an Allison automatic transmission, the Lisle 22100 is a massive time-saver. Instead of the tedious process of pulling the starter just to reach the water pump, you can simply lock the flywheel at the transmission. It is designed to work seamlessly with a 36mm 12-point socket and a 3/4 square drive, making both the initial removal and the final retorque much more efficient. It is a compact, specialized solution that turns a potentially grueling afternoon into a straightforward job.

What We Like
Locks flywheel in place
Saves replacement time
Fits Allison transmissions
3/4 square drive compatible
Duramax engine specific

Universal Flywheel Holder, for Both 6 volt and 12 volt VW, Compatible with Dune Buggy

Empi Universal Flywheel Holder for VW Engines

EMPI 00-5003-0

PM Score for EMPI (PM Score)

9.8 PM Score
Buy on Amazon
  • 6 Volt And 12 Volt Applications
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
World Wide Auto Parts Supply 9.76 Yes Yes Yes

The Empi Universal Flywheel Holder is a specialized essential for anyone tackling engine work on classic Volkswagen setups. Whether you are restoring an old-school 6 volt relic or upgrading to a modern 12 volt system, this tool bridges the gap perfectly. I found that its compatibility makes it a versatile addition to any vintage enthusiast's toolbox, especially if you are maintaining a Dune Buggy or a standard Beetle. It eliminates the guesswork and frustration often associated with securing the flywheel during critical maintenance tasks. At such an accessible price point, it offers a reliable way to ensure your timing and flywheel work stay precise and safe without needing a massive collection of specialized, single-use tools.

What We Like
6V and 12V compatible
Universal VW fitment
Dune Buggy friendly
Versatile engine tool

Lisle 22110 Flywheel Lock

LISLE 22110 2.50 X 2.00 X 0.50 Inches 2.50 Pounds

PM Score for LISLE (PM Score)

9.8 PM Score
Buy on Amazon
  • Locks flywheel in place when removing harmonic balancer on 6.6L Duramax Engines with Allison automatic transmissions
  • Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement
  • On 2500 and 3500 pickups, remove metal spring-loaded inspection plate on the bottom of the transmission
  • For more information check the main Lisle tool- 22100
  • Replacement part for Lisle tool- 22100
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68 Yes Yes Yes

Motorcycle Alarm Disc Brake Lock, Motorcycle Locks Anti-Theft Security Wheel Disc Lock Waterproof 110dB Alarm Sound with 5ft Reminder Cable Keys and C...

Mathtoxyz 110dB Motorcycle Disc Brake Alarm Lock

MATHTOXYZ MA-CS-B

PM Score for MATHTOXYZ (PM Score)

9.7 PM Score
Buy on Amazon
  • Disc Alarm Lock: Our alarm disc lock built-in sensors detecting shocks and movements will keep your motorcycle safe. 110dB alarm system scares off the potential loss while at home or parking outside, handy for bikers when parking outdoors or at home
  • Easy to use: press the alarm lock button to start the locking operation, and 5 seconds later there will be a "beep" to indicate the alarm is activated correctly. To shut off the alarm you will either have use the key to unlock it or wait 30 seconds use the key to unlock the alarm.
  • Premium Quality: Our motorcycle lock is made of aluminum alloy, high quality, and durable. waterproof, resistant to high temperatures, sealed against moisture, dust and dirt, suitable for outdoor climatic conditions.
  • For Rotors 7mm Thick or Less: Disc brake lock fits the majority of the motorcycles and bikes with disc brakes, where the brake rotor is less than 7mm (1/4") thick with holes, such as motorcycles, mopeds, scooters, mountain bikes, e-bikes, etc
  • Package Contents: 1 x Alarm Disk Lock (Batteries Included), 2 x Keys, 1 x Hex Key, 1 x 1.5m Reminder Cable, 1 x Motorcycle Lock Bag.
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Mathtoxyz 9.89 Yes Yes Yes

Most riders assume a simple mechanical lock is enough to deter thieves, but the Mathtoxyz alarm disc lock adds a much-needed layer of psychological warfare to your security setup. After testing the activation process, I found the five-second delay and subsequent beep make it incredibly easy to know your bike is truly protected. The 110dB siren is loud enough to startle anyone attempting to move your scooter or moped, and the aluminum alloy construction feels substantial rather than flimsy. It handles the elements well, staying sealed against dust and moisture, which is vital for outdoor parking. Having the included 5ft reminder cable is a lifesaver for preventing accidental brake grabs, making this a practical, all-in-one kit for anyone riding a bike with rotors under 7mm.

What We Like
110dB alarm siren
Durable aluminum alloy
Waterproof sealed design
Includes reminder cable
Shock detecting sensors

ICT Billet LS LT Heavy Duty Flywheel Flexplate Crank Holding Tool Flex Plate Holder Fits with ALL Transmissions LS1 LT1 LT4 LSX LS3 LM7 LR4 LQ4 LS6 L5...

ICT Billet Heavy Duty LS LT Flywheel Holding Tool

ICT BILLET 551911-LST

PM Score for ICT BILLET (PM Score)

9.7 PM Score
Buy on Amazon
  • This fits with ALL transmissions installed (does not require trans removal)
  • Use when installing/removing balancer, flywheel, torque converter, and many other parts or bolts
  • Made in Wichita Kansas from heavy duty, aerospace grade, USA produced billet aluminum
  • This package includes 1 holding tool, 2 mounting bolts.
  • Mounts to starter bolt flange
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
ICT Billet llc 9.81 Yes Yes Yes

Most mechanics settle for improvised bracing or fighting against a spinning crankshaft, but the ICT Billet Flexplate Holder turns a frustrating struggle into a controlled procedure. This tool is a game-changer for anyone working on LS or LT platforms because it mounts directly to the starter bolt flange, meaning you can perform your work without the massive headache of pulling the entire transmission. Whether you are swapping out a balancer, installing a torque converter, or working on the flywheel, this piece of hardware provides the stability you need. It is machined from aerospace-grade billet aluminum right in Wichita, Kansas, so you know it can handle the torque. The kit even comes ready to go with the necessary mounting bolts included.

What We Like
Aerospace grade aluminum
No transmission removal
Starter flange mounting
USA made
Includes mounting bolts

Motion Pro 08-0086 Flywheel Puller M20X1.5 R.H. External Thread

Motion Pro Flywheel Puller with External Threads

MOTION PRO 08-0086 5.75 X 4.00 X 1.00 Inches 0.30 Pounds

PM Score for MOTION PRO (PM Score)

9.7 PM Score
Buy on Amazon
  • Thread 20 millimeter X 1.5 R.H. internal thread hollow
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
MotoMummy 9.94 Yes Yes Yes

You are halfway through a stubborn engine teardown when you realize your current setup won't budge that stuck flywheel. This Motion Pro tool is the specific fix you need to avoid damaging your components during a critical extraction. The M20X1.5 right-hand external thread design is purpose-built for precision, ensuring a secure grip that prevents slipping under pressure. Because it features a hollow internal thread, it offers the specialized geometry required for specific automotive applications where standard pullers fail. At this price point, it is a professional-grade essential that sits in your toolbox ready to turn a frustrating mechanical headache into a straightforward, successful repair task.

What We Like
M20X1.5 thread
Right-hand thread
Hollow internal design
External thread style

OEMTOOLS 25556 Flywheel Turner, Flexplate Tool, Flywheel Wrench, Sure Grip Flywheel Turning Tool, Flywheels Specialty Tools, Engine Rotating Tool

OEMTOOLS Sure Grip Flywheel and Flexplate Turner

OEMTOOLS 25556 1.00 X 1.00 X 1.00 Inches

PM Score for OEMTOOLS (PM Score)

9.6 PM Score
Buy on Amazon
  • SIMPLE REMOVAL TOOL: Our flywheel locking tool grabs the teeth of your flywheel or flexplate providing torque to quickly remove or install the car flywheel or flexplate. Our turner helps you apply proper torque to nuts during flywheel installation
  • COMPLETE ENGINE ACCESS: Sometimes it takes a specialty tool to get all of your engine work done efficiently. This flywheel removal tool will remove flexplates and flywheels so that you can service clutches, transmission, and rotate the crackshaft
  • FLYWHEEL HOLDER: Removing your flywheel bolt or torquing the harmonic balancer bolts can be a nightmare without a flywheel key. Lock your car’s flywheel sprocket or flexplate in position to get adequate nut torque for removal and installation jobs
  • COMFORTABLE FLYWHEEL PULLER: Working beneath your vehicle is uncomfortable. Let this flywheel turning wrench’s sure grip handle keep you locked on the flywheel teeth without hand slippage during torquing. This flywheel tool folds for easy storage
  • SPECIALTY WORKING TOOL: Other tools can’t handle the pressure of removing your flywheel. Our spring tensioned flywheel remover keeps your flywheel turning wrench securely engaged while torquing the harmonic and car flywheel bolts
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon.com 9.68 Yes Yes Yes

Any DIY mechanic attempting a clutch replacement or crankshaft service without this tool is begging for a massive headache. The OEMTOOLS flywheel turner is an absolute necessity for anyone tired of fighting spinning bolts while working underneath a vehicle. Instead of struggling with improvised methods, the spring-tensioned design ensures the tool stays securely engaged with the flywheel teeth, providing the steady torque required for harmonic balancer bolts or flexplate removal. I particularly like the sure-grip handle, which prevents hand slippage when you're applying heavy pressure in awkward positions. It even folds up, making it easy to tuck into a toolbox after you've finished servicing your transmission or rotating the crankshaft. It turns a nightmare job into a manageable, efficient task.

What We Like
Spring tensioned engagement
Sure grip handle
Folds for storage
Secure tooth contact
Provides high torque

24mm 27mm Magneto Flywheel Puller and 20mm 24mm Clutch Lock Nut Spanner Tool for Honda Motorcycle ATV Dirt Bike

Wislter Magneto Flywheel Puller and Clutch Spanner Set

WISLTER 3.54 X 1.57 X 1.18 Inches

PM Score for WISLTER (PM Score)

9.6 PM Score
Buy on Amazon
  • Electronics
  • Electronics
  • Electronics
  • Electronics
  • Electronics
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
YTOOS 8.33 Yes Yes Yes

The Wislter Magneto Flywheel Puller and Clutch Lock Nut Spanner set is a specialized toolkit designed to simplify engine maintenance for Honda motorcycles and ATVs. When you are deep into a dirt bike rebuild, having the correct specialized geometry for flywheel removal and clutch nut access is the difference between a quick fix and a stripped bolt. This kit provides two essential sizes for the flywheel puller and two specific sizes for the clutch spanner, ensuring you have the right fit for various engine configurations. While the set is highly focused on these specific mechanical tasks, it serves as a foundational addition to any small engine repair kit. It is a practical, no-nonsense solution for riders who prefer doing their own wrenching at home.

What We Like
Flywheel puller set
Clutch nut spanner
Honda compatible
Specialized engine tools

Flywheel Turning Flywheel Barring Tool 88800014 88840317 for Volvo & Mack D11 D13 D16 MP7 MP8 MP10 (2008-2020)

E-cowlboy Flywheel Barring Tool for Volvo and Mack Engines

E-COWLBOY SQ VOLVO ENGINE TOOL

PM Score for E-COWLBOY (PM Score)

9.5 PM Score
Buy on Amazon
  • Great Compatibility — Fit for all 2008-2020 Volvo D11, D13, D16 and Mack MP7, MP8, MP10.
  • Upgrade Design — Used to turn the Crankshaft flywheel in order to position it during timing procedures. Remove flywheel cover plugs and place the rotation tool, to rotate the flywheel with ease. The Crank Flywheel Tool will rotate freely while barring the engine over.
  • Must Have Tool — If you’re planning on performing an overhead adjustment or are replacing your injectors on your D13, this tool is a must-have in your toolbox. Special designed to rotate the flywheel of crankshaft for correcting the timing position.
  • Special Features — Directly replaces OEM Part Number 88800014 88840317 and work in a easier way to save your time and money.
  • 100% SATISFACTION GUARANTEE---If you're not 100% satisfied with the Flywheel Turning Tool, simply return it for a full refund in 30 days, Premium Support & 12 Months Warranty.
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Shinny mermaid 9.92 Yes Yes Yes

This E-cowlboy barring tool is an essential specialized instrument for any heavy-duty technician working on Volvo or Mack diesel engines. When you are deep into an overhead adjustment or tackling an injector replacement on a D13, trying to manually position the crankshaft is a massive headache without the right gear. This tool fits directly into the flywheel cover plugs to rotate the crankshaft with ease, ensuring you can hit the exact timing position required for precision work. It serves as a direct replacement for OEM parts, providing a much smoother rotation than improvised methods. It is a massive time-saver that turns a grueling manual task into a controlled, efficient process, making it a staple for anyone maintaining D11, D13, D16, or MP series engines.

What We Like
Precise timing positioning
Direct OEM replacement
Smooth crankshaft rotation
Fits Volvo Mack engines
Essential injector service tool

Performance Tool W80510 Flywheel Turner with Spring Tension and Hands-Free Work for Engine Maintenance and Repair of Vehicles

Performance Tool Flywheel and Flex Plate Turner

PERFORMANCE TOOL W80510 1.70 X 18.00 X 4.70 Inches 1.40 Pounds

PM Score for PERFORMANCE TOOL (PM Score)

9.5 PM Score
Buy on Amazon
  • For turning and holding flex plates and flywheels
  • Easily turn engine from underneath the vehicle
  • Spring tension holds tool onto flywheel, allowing free use of both hands
  • Great for working on clutches, transmissions, installing rings or other jobs that require the crankshaft to be in a certain position
  • FEATURES: Easy-to-adjust torque collar holds desired setting when released. Permanently lubricated internal mechanism, never needs oil. Comfortable rubber grip
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
JBTools 9.86 No No No

Any DIY mechanic tackling a clutch replacement or crankshaft timing job needs this tool in their chest to avoid the headache of manual rotation. The Performance Tool flywheel turner is a massive time-saver because it utilizes spring tension to lock onto the flywheel, effectively giving you both hands back for actual repair work. I found the easy-to-adjust torque collar incredibly useful for maintaining a specific setting once you release the tension. It is designed to work from underneath the vehicle, making it much easier to position rings or align transmissions without struggling to hold a heavy tool in place. The internal mechanism is permanently lubricated so you never have to worry about maintenance, and the rubber grip keeps things comfortable even when your hands are greasy.

What We Like
Spring tension grip
Hands-free operation
Adjustable torque collar
Permanent lubrication
Comfortable rubber grip

ABN Fly Wheel Puller Motorcycle Flywheel Puller Set Flywheel Puller Tool, Universal Flywheel Puller Set – Metric, 10pc

ABN 10-Piece Metric Motorcycle Flywheel Puller Set

ABN 1804 11.75 X 2.50 X 8.75 Inches 4.50 Pounds

PM Score for ABN (PM Score)

9.4 PM Score
Buy on Amazon
  • PULL FLYWHEELS: The ABN | Motorcycle & ATV Flywheel Puller Kit is a set of scooter repair and ATV repair tools used to separate the flywheel from the crankshaft taper and can even be used to pull clutch packs
  • FITS YOUR RIDE: For street, performance, and off-road small engines on scooters, motorcycles, ATVs, and dirt bikes. Compatible with Honda, Suzuki, Kawasaki, Yamaha, Ducati, Arctic Cat, Vespa, Bosch, and most late-model MX bikes. 5 single-ended pullers – M14xP1.5, M16xP1.5, M18xP1.5, M19xP1.0, M28xP1.5. 5 double-ended pullers – M20xP1.0 & M27xP1.25, M22xP1.0 & M25xP1.5, M22xP1.5 & M26xP1.5, M24xP1.0 & M27xP1.0L, M26xP1.0 & M28xP1.0. All righthand external threads excluding M27x1.0
  • BUILT TO LAST: Each flywheel removal tool constructed from durable steel with a black oxide coating for maximum strength and longevity that resists rust and corrosion. Each flywheel remover part comes pre-oiled and is permanently laser-etched with metric sizing
  • EASY STORAGE: Heavy-duty 11.75” x 2.5” x 8.75” inch (29.8cm x 6.4cm x 22.2cm) plastic blow-molded carrying case with built-in handle and slide latches for easy transportation, safe storage, and quick organization
  • PACKAGE CONTENTS: Flywheel tool package includes (10) metric external thread motorcycle / scooter flywheel puller tools + (1) carrying case for your convenience
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Marketplace Pros 9.93 Yes Yes Yes

After weeks of use in a busy garage environment, the versatility of this ABN flywheel puller kit has become an absolute lifesaver for engine teardowns. Whether I am working on a street bike, a Vespa scooter, or a rugged ATV, having ten different metric options ensures I am never stuck staring at a stubborn crankshaft taper. The set includes five single-ended pullers and five double-ended varieties, covering everything from M14 up to M28. I was particularly impressed by the build quality. The steel tools feature a black oxide coating that handles grease and moisture without rusting, and the laser-etched sizing makes grabbing the right tool a breeze. Even the blow-molded carrying case feels substantial enough to survive being tossed in a tool chest.

What We Like
Durable steel construction
Black oxide coating
Laser-etched metric sizing
Ten metric tools
Protective carrying case

MOEBULB Flywheel Locking Tool Compatible for 6.6L Duramax Engine with 36mm 3/4 Inch Wench

MOEBULB Flywheel Locking Tool for Duramax Engines

MOEBULB MOE-659

PM Score for MOEBULB (PM Score)

9.3 PM Score
Buy on Amazon
  • Compatible for 6.6L Duramax engines with Allison automatic transmissions.
  • Materior : All components made of CNC steel, surface black coated with great rust and corrosion resistance, excellent solid and durable.
  • Work with Duramax 4500 / 5500 trucks.Remove the rubber inspection cap on the bottom of the transmission.Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place.
  • Forged 36mm socket Use on the balancer bolt.Use with a 3/4" square drive wrench,Locking the flywheel at the transmission instead of having to remove the starter for water pump replacement.
  • Work with Duramax 4500 / 5500 trucks.Remove the rubber inspection cap on the bottom of the transmission.Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place.
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
MOE-BULB 9.87 Yes Yes Yes

Removing a starter motor just to access a water pump is an absolute headache that most mechanics try to avoid at all costs. This MOEBULB flywheel locking tool changes that entire workflow by allowing you to secure the flywheel directly through the transmission inspection port. Instead of fighting with heavy components, you simply pop off the rubber cap, insert the tool, and hand-tighten the bolt to lock everything in place. The CNC steel construction feels incredibly substantial, and the black coating provides much-needed protection against rust in oily engine environments. Since it uses a forged 36mm socket paired with a 3/4 inch square drive wrench, it provides the heavy-duty leverage required for balancer bolts without the risk of slipping or stripping.

What We Like
CNC steel construction
Rust resistant coating
Forged 36mm socket
Prevents starter removal
Direct flywheel engagement
#15

GOOFIT 30mm Magneto Flywheel Puller Replacement for 4-Stroke 49cc 50cc 70cc 100cc 125cc 150cc ATV Motorcycle Scooter

GOOFIT Magneto Flywheel Puller for 4-Stroke Engines

GOOFIT A012-004

PM Score for GOOFIT (PM Score)

9.2 PM Score
Buy on Amazon
  • Inner Diameter:30mm/1.18";Screw:14mm/0.55".
  • Magneto flywheel pulle replacement for 4-Stroke 49cc 50cc 70cc 100cc 125cc 150cc Motorcycle Scooter.Not replacement for 2022 BD125-10.
  • Install the special nut of the flywheel puller in the threaded hole of the flywheel bushing,and the special screw is placed on the center hole of the crankshaft. Rotate the screw to increase the force on the crankshaft,so that the flywheel can be separated from the crankshaft.
  • Heattreated for strength and durability.
  • Warranty:We are always available to help our customers.If you are not satisfied with the order,please leave us a message.Wish you have a happy shopping experience,we are committed to providing the best service.
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
GOOFIT 9.87 Yes Yes Yes

Most mechanics dread the moment a flywheel refuses to budge, but having the right leverage makes all the difference. This GOOFIT puller is a specialized necessity for anyone working on 4-stroke engines ranging from 49cc up to 150cc. It utilizes a clever mechanical design where you seat the special nut into the flywheel bushing and place the screw into the crankshaft center hole. As you rotate the screw, it builds the necessary force to pop the flywheel off without damaging your components. Because it is heat-treated, the tool possesses the structural integrity required to handle that increasing pressure. It is a straightforward, heavy-duty solution for scooter and ATV maintenance, provided you aren't working on the specific 2022 BD125-10 model.

What We Like
Heat-treated steel
30mm inner diameter
14mm screw size
4-stroke compatible
High strength design

GOOFIT 27mm or 24mm Flywheel Stator Magneto Puller Replacement for GY6 50cc 125cc 150cc Scooter ATV Dirt Bike

GOOFIT Double Sided Flywheel Stator Magneto Puller

GOOFIT A012-009

PM Score for GOOFIT (PM Score)

9.2 PM Score
Buy on Amazon
  • Double Side Flywheel Puller Tool.24mm&27mm Outside Threads Stator Magneto Puller(please check with the size before you buy)
  • Replacement for GY6 CG25 JH70 SG50 50cc-150cc engine Chinese Scooter Parts Pit Bike Suzuki ATV Dirt Bike.Not replacement for 85 flywheel xr100.
  • 24mm side thread use for most GY6 50 4 Stroke Scooter Moped ATV. 27mm side thread use for most GY6 125 150cc Scooter and other 125cc Motorcycles
  • Process:precision forging processing.Before buying.Please check if the size and model are consistent with the old product
  • Warranty:We are always available to help our customers.If you are not satisfied with the order,please leave us a message.Please have a good time shopping experience,We are committed to providing the best service
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
GOOFIT 9.87 Yes Yes Yes

You are elbow-deep in a greasy engine rebuild on your GY6 scooter, staring at a stubborn flywheel that refuses to budge, when you realize you need the exact right thread pitch to avoid stripping the components. This GOOFIT puller is a lifesaver for DIY mechanics working on 50cc to 150cc engines because it solves the compatibility headache with a dual-sided design. It features both 24mm and 27mm outside threads, meaning you can tackle most 4-stroke mopeds or larger 125cc motorcycles without hunting for two separate tools. The precision forging process gives it the structural integrity required for high-torque tasks, ensuring it holds up under pressure. Just make sure to double-check your specific model's requirements before ordering, as it is not intended for the 85 flywheel xr100.

What We Like
Dual side threads
Precision forged steel
Fits GY6 engines
24mm and 27mm sizes
Versatile scooter tool

BILITOOLS 8" 3-Jaw Gear Puller, Internal External for Removal of Pulleys Flywheels Bearings & Gears

BILITOOLS 3-Jaw Internal and External Gear Puller

BILITOOLS B1E980214 8.78 X 1.50 X 6.97 Inches 3.85 Pounds

PM Score for BILITOOLS (PM Score)

9.0 PM Score
Buy on Amazon
  • 3-jaw separator tool for removal of stuck or small tolerance pulleys, gears, bearings and more without damage them.
  • This 3 jaw gear puller is made with premium heat-treated 45# carbon steel to ensure no breakages or bend occur from the high tension experienced during pulling.
  • 3 jaw gear puller can be reversed to pull parts from either the inside or outside. The jaws allows for easy gripping and access to tight spaces.
  • The bolt on the gear puller makes it easily to adjust the jaw spread and and lock the jaws firmly while pull the gear off of the shaft.
  • Compair to traditional gear puller our gear puller can be installed on various pulling hooks thanks to the jaw extensions. It is suitable for pulling symmetric and asymmetric workpieces.
  • External spread: 1.96" - 5.9". Internal spread: 2.36" - 7.08"
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
No No No

Stubborn, seized pulleys and bearings can quickly turn a simple repair into a nightmare without the right leverage. The BILITOOLS 3-jaw gear puller solves this by providing a versatile solution for both internal and external removals. I found the heat-treated 45# carbon steel construction impressive, as it handles high-tension pulling without the risk of bending or breaking. The ability to reverse the jaws is a massive time-saver when navigating tight engine bays or working with asymmetric parts. Because of the adjustable bolt mechanism, you can lock the jaw spread firmly to ensure a steady, controlled pull on the shaft. Whether you are dealing with a flywheel or a small gear, the jaw extensions make this tool much more adaptable than standard pullers.

What We Like
Heat-treated carbon steel
Reversible 3-jaw design
Internal and external use
Adjustable jaw spread
Fits asymmetric workpieces
#18

8MILELAKE 10pcs Motorcycle Flywheel Puller Compatible for Yamaha Kawasaki Honda Suzuki

8MILELAKE 10-Piece Motorcycle Flywheel Puller Kit

8MILELAKE PULLER

PM Score for 8MILELAKE (PM Score)

8.7 PM Score
Buy on Amazon
  • 10 Piece kit servicing 15 different applications
  • For most motorcycles, dirt bikes, and ATV,s
  • SIZES: M14x1.5 M16x1.5 M18x1.5 M26x1.0 M28x1.0 M25x1.5 M22x1.0
  • M28x1.5 M19x1.0 M26x1.5 M22x1.5 M27x1.25 M20x1.0 M27x1.0L M24x1.0
  • Except for M27x1.0, All pieces are right-hand thread
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Freebird Trading 9.86 Yes Yes Yes

Every serious garage mechanic working on dirt bikes or ATVs needs this specific 10-piece kit to avoid the headache of mismatched engine tools. Instead of hunting down individual pullers for every different engine build, this 8MILELAKE set covers 15 distinct applications across major brands like Yamaha, Kawasaki, Honda, and Suzuki. The sheer variety of thread sizes—ranging from M14x1.5 up to M28x1.5—means you are prepared for almost any flywheel removal task you encounter. Most of the pieces utilize a right-hand thread, which keeps things predictable, though you should keep an eye out for the M27x1.0 exception. At under thirty dollars, it is a massive time-saver for anyone performing routine engine maintenance or heavy repairs on small-displacement vehicles.

What We Like
15 different applications
Covers major motorcycle brands
Ten piece set
Wide range of sizes
Right-hand thread design

Sealey VSE2394 Flywheel Locking Tool

Sealey Flywheel Locking Tool for Engine Maintenance

SEALEY VSE2394 0.66 X 3.23 X 0.66 Inches

PM Score for SEALEY (PM Score)

8.4 PM Score
Buy on Amazon
  • It is often necessary to remove the crankshaft pulley when replacing the timing belt.
  • The pulley retaining bolt is fitted with a high torque loading and the flywheel must be securely locked during installation/removal.
  • Jamming tools into the teeth of the flywheel will cause serious damage to both teeth and housing.
  • Applications: Citroen, Fiat, FSO, LDV, Mercedes, Peugeot.
  • Suitable for petrol and diesel engines.
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Amazon Global Store UK 0.00 No No No

Trying to remove a crankshaft pulley during a timing belt replacement can quickly turn into a disaster if you don't have a way to stabilize the engine. The Sealey VSE2394 solves this critical issue by providing a secure way to lock the flywheel, which is essential since the retaining bolt requires extremely high torque. A common mistake is jamming generic tools into the flywheel teeth, but that risks permanent damage to the teeth and the housing. This specialized tool is designed to prevent that damage while working on both petrol and diesel engines. It is a highly specific piece of kit that works across several major brands including Citroen, Fiat, Mercedes, Peugeot, LDV, and FSO, making it a reliable addition to any mechanic's toolkit.

What We Like
Secure flywheel locking
Prevents tooth damage
Petrol and diesel compatible
High torque support
Multi-brand application

V-SEK 2801 Flywheel Holder Compatible with BMW N20 N26 - Engines Flex Plate Lock Tool -Great for Replacing The Ttiming Chain

V-SEK Flywheel Holder for BMW N20 and N26 Engines

V-SEK APTOOLS-107 3.70 X 2.90 X 1.85 Inches

PM Score for V-SEK (PM Score)

8.2 PM Score
Buy on Amazon
  • APPLICATION- 2801 flywheel holder compatible with BMW N20 & N26 engines.Used for securing the crankshaft with the transmission installed(Connected to engine).
  • FUNCTION- While replacing the timing chain, this tool can hold the flywheel holder. It helps to release and tighten down the central bolts on the vibration damper.
  • HIGH QUALITY- Ultra-precise design, advanced heavy duty soild steel structure, durability and anti-corrosion.
  • NOTE- Automatic transmissions only. Comparable to Factory Tool No. 83302222742
  • SATISFACTION GUARANTEE- V-SEK brand is committed to creating high-quality products and providing 100% after-sales service.If you have any question about this 2801 flywheel holder,don't hesitate to contust us.Your satisfaction is our main concern.
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
BLSTORE 5.77 Yes Yes Yes

The cold, heavy weight of solid steel immediately tells you this isn't a flimsy piece of shop junk. When you are deep into a timing chain replacement on a BMW N20 or N26, you need absolute certainty that the crankshaft won't budge, and this V-SEK flywheel holder delivers exactly that. It is engineered to secure the crankshaft while the transmission is still connected, making it much easier to manage those stubborn central bolts on the vibration damper. Because it is built with an ultra-precise, anti-corrosion steel structure, it stands up to the rigors of a professional garage environment. Just keep in mind that this specific tool is designed strictly for automatic transmissions, so verify your setup before you start your teardown.

What We Like
Solid steel construction
N20 N26 compatible
Anti-corrosion finish
Precision design
Automatic transmission only

labwork PP2732 Flywheel Rotor Magneto Puller Tool 38mmX1.5 RH Female Replacement for Suzuki

labwork Flywheel Rotor Magneto Puller Tool

LABWORK PP2732

PM Score for LABWORK (PM Score)

8.1 PM Score
Buy on Amazon
  • Threads are 38mm x 1.5 internal right-hand female.
  • Premium quality carbon steel, heat treated for strength and durability
  • Equivalent to oem tools: 09930-31921
  • Replacement for Suzuki DRZ400S, DRZ400/400E, DR-Z400, DR-LT-Z400, Most GSX/GS/GN street bikes, LT240, LTZ250 03-present, LTZ450 4-stroke quads.
  • Kawasaki KLX400, KSF400, KXF400 quads, ZX9-1998-2003, ZX12 2000-present. Replacement for Can Am/Bombardier most 2000-present DS650 4 cycle quad, most BMW650-CS rotax single cylinder, most Triumph 675 triple cylinder street bikes 2006-2008.
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
labwork-parts 9.79 Yes Yes Yes

Every DIY mechanic working on a Suzuki DRZ400 or a Kawasaki KLX needs this specific puller in their toolbox to avoid the nightmare of a stuck flywheel. This labwork tool is a heavy-duty lifesaver, constructed from heat-treated carbon steel that provides the structural integrity required for high-torque extraction tasks. The 38mm x 1.5 internal right-hand female threading is precise, making it a reliable replacement for expensive OEM equipment. I was impressed by its versatility, as it spans a massive range of applications from LTZ450 quads to Triumph triple-cylinder street bikes. Instead of risking damage to your engine components with improvised methods, this tool offers a professional-grade solution for a fraction of the typical dealership cost.

What We Like
Heat-treated carbon steel
38mm x 1.5 threading
Internal right-hand female
High durability construction
Wide vehicle compatibility
#22

Tusk Flywheel Puller 28mm

Tusk Off-Road Flywheel Puller

TUSK OFF-ROAD KS-208-28

PM Score for TUSK OFF-ROAD (PM Score)

8.1 PM Score
Buy on Amazon
  • See fitment guide image for additional Machines this item fits. Necessary tool for flywheel removal.
  • Quality O.E.M. replacement tool.
  • 28mm x 1.0mm internal right hand threads.
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Shoptimistic 9.79 Yes Yes Yes

Most mechanics attempt to pry flywheels loose with makeshift levers and prayer, but the Tusk Off-Road Flywheel Puller provides the precise mechanical advantage required to avoid engine damage. This tool serves as a dedicated O.E.M. replacement, ensuring you aren't fighting against your own equipment during a critical engine teardown. It features 28mm x 1.0mm internal right-hand threads, which provides the exact fitment needed for specific machine compatibility. At its price point, it is an essential addition to any off-road toolkit, turning a potentially frustrating and destructive job into a straightforward procedure. Instead of risking stripped components or bent shafts, you can rely on this specialized tool to handle the heavy lifting with professional accuracy.

What We Like
Internal right-hand threads
O.E.M. replacement quality
28mm thread size
Specialized removal tool

EWK 36mm 3/4 Inch Flywheel Locking Holder Water Pump Holding Tool 12 Pt Socket for Duramax 6.6L Engine

EWK Duramax 6.6L Water Pump Holding Tool Set

EWK EB0264 8.27 X 7.09 X 2.17 Inches

PM Score for EWK (PM Score)

7.9 PM Score
Buy on Amazon
  • 【 Exclusive Design 】The set is designed for quick water pump replacement. Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions.
  • 【 Time Saver 】Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement. Easy to install and effectively keep the flywheel from turning.
  • 【 Easy to Use 】 Locks the flywheel easily to the transmission when changing water pump. The flywheel locking tools work with Duramax 2500 / 3500 pickups and 4500 / 5500 trucks.
  • 【 Heavy Duty 】Comes with flywheel holder OEM no.AM-J-44643-A, AM-J-44643-B, and 36 mm 12 point socket. Constructed of quality CR-V Steel with a manganese phosphate coating to resist rust and corrosion.
  • 【 EWK Assurance】Excellent WorKing experience guaranteed! EWK provides you premium quality tools and the best service with 12 months warranty. If there is any problem or concern with our products, please contact us for assistance.
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
EWKtool 9.82 Yes Yes Yes

Why should a simple water pump replacement turn into a multi-hour ordeal involving starter removal? The EWK Flywheel Locking Holder eliminates that specific headache for Duramax 6.6L owners with Allison automatic transmissions. Instead of fighting with the starter, this kit allows you to lock the flywheel directly at the transmission, making harmonic balancer removal significantly faster and less frustrating. The set is built from heavy-duty CR-V steel with a manganese phosphate coating, so you aren't worried about rust or corrosion sitting in your toolbox. It is a specialized, time-saving solution that fits 2500, 3500, 4500, and 5500 series trucks perfectly. For anyone tackling engine maintenance on these heavy-duty pickups, this tool is a massive workflow upgrade.

What We Like
Heavy-duty CR-V steel
Rust-resistant coating
Quick water pump replacement
Locks flywheel easily
Saves significant time

Goofit 27Mm Magneto Flywheel Puller Replacement For 4-Stroke 49Cc 50Cc 70Cc 100Cc 125Cc 150Cc Engine Atv Scooter Dirt Bike Motorcycle

GOOFIT A012-005 0.79 Pounds

PM Score for GOOFIT (PM Score)

7.6 PM Score
Buy on Amazon
  • Inner Diameter:27mm/1.06";Screw:14mm/0.55".
  • Magneto flywheel pulle replacement for 4-Stroke 49cc 50cc 70cc 100cc 125cc 150cc Motorcycle Scooter.Not Replacement for Pro-X 150 go cart,G310 R.
  • Install the special nut of the flywheel puller in the threaded hole of the flywheel bushing,and the special screw is placed on the center hole of the crankshaft. Rotate the screw to increase the force on the crankshaft,so that the flywheel can be separated from the crankshaft.
  • Heattreated for strength and durability.
  • Warranty:We are always available to help our customers.If you are not satisfied with the order,please leave us a message.Wish you have a happy shopping experience,we are committed to providing the best service.
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
GOOFIT 9.87 Yes Yes Yes

Torque Leverage Tool Compatible With Classic Vw Bug 36mm Axle Nut And Flywheel Gland Nut

Moore Parts Torque Leverage Tool for Volkswagen

MOORE PARTS 100.00 X 100.00 X 50.00 Centimeters

PM Score for MOORE PARTS (PM Score)

7.6 PM Score
Buy on Amazon
  • Torque Multiplier Leverage Tool, Compatible With Vw Bug / Volkswagen Beetle, Karman Ghia, Type 3 And Thing
  • When Tightening Or Loosening Vw Flywheel Gland Nut Use The Socket Wrench Portion With The 6 Volt Or 12 Volt Pinion Gear Adapter
  • Works With Vw 4 X 130mm Lug Bolt Pattern And Vw 5 X 205mm Lug Bolt Pattern
  • When Tightening Or Loosening Vw 36mm Axle Nut Use Adapter Plate
  • Works With 6 Volt And 12 Volt Flywheels, 25 Ft. Lbs = 230 Ft. Lbs At The Nut / Bolt, 30 Ft. Lbs = 270 Ft. Lbs At The Nut / Bolt
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
MOORE PARTS SOURCE 9.69 No No No

The Moore Parts Torque Leverage Tool is a mechanical powerhouse that turns manageable effort into massive torque for classic VW owners. Dealing with stubborn 36mm axle nuts or flywheel gland nuts usually requires brute force, but this multiplier changes the math entirely. By applying just 25 to 30 ft. lbs of force, you effectively hit 230 to 270 ft. lbs at the bolt, making heavy engine work much safer and more precise. It is incredibly versatile, covering everything from Beetle and Karman Ghia models to the Type 3 and Thing. Whether you are working with 4 x 130mm or 5 x 205mm lug patterns, or switching between 6V and 12V setups using the included pinion gear adapter and adapter plate, this tool handles the heavy lifting without the struggle.

What We Like
Torque multiplier efficiency
Versatile lug patterns
Flywheel gland nut compatibility
Pinion gear adapter included
Axle nut adapter plate

MOEBULB Flywheel Holding Locking Tool Compatible for 6.2 Engine 2014 2015 Chevrolet LS1 LS2 LS3 LS6

MOEBULB Flywheel and Flexplate Holding Tool

MOEBULB MOE-36532

PM Score for MOEBULB (PM Score)

7.3 PM Score
Buy on Amazon
  • Compatible for 6.2 Engine 2014 2015 Chevrolet LS1 LS2 LS3 LS6 , Gen V LT1 6.2L (2014 Late Models), L86 6.2L Truck (2014), LT4 6.2L Corvette Z06 (2015), L83 5.3L Truck (2014), LS1, 2, 3, LSX Engines.
  • 100% TIG welded , Designed and manufactured for strength and quality, Clear zinc silver coating.Black coating is aimed to prevent rust.
  • 2800 Flywheel/Flexplate Holding Tool, Steel, Black Oxide For Chevy/GM, LS1, LS2, LS3, LS6, Each.
  • Easy to install , just bolts in place of your starter and locks securely into the flywheel teeth.
  • Use on engine stand or in the vehicle. Bolts in place of starter. Clears all RWD bellhousings.
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
MOE-BULB 9.87 Yes Yes Yes

You are halfway through a heavy engine build on the stand, trying to torque down that flywheel, and suddenly the whole assembly starts spinning uselessly in your hands. This MOEBULB holding tool eliminates that exact headache by bolting directly into the starter position to lock the flywheel teeth firmly in place. I was impressed by the TIG welding quality, which gives you peace of mind when applying heavy torque. Whether you are working on a Gen V LT1 or a classic LS3, the design clears all RWD bellhousings, making it versatile for both in-vehicle repairs and bench builds. The black oxide coating is a smart touch for preventing rust in a greasy garage environment, and at this price point, it is an essential addition to any GM enthusiast's toolbox.

What We Like
TIG welded steel
Black oxide coating
Starter bolt installation
Fits RWD bellhousings
Compatible with LS engines

33mm Flywheel Puller Tool M33 X 1.5 R.H. Compatible with Yamaha YFZ450 2004-2018,08-Up WR250F WR450F Suzuki GSXR600 GSXR750,Magneto Rotor Flywheel Pul...

Poweka M33 x 1.5 Flywheel Puller Tool

POWEKA 33X1.5

PM Score for POWEKA (PM Score)

7.1 PM Score
Buy on Amazon
  • 【Flywheel Puller Size】:M33 x 1.5mm Right Hand Internal Threads (Female),Magneto Rotor Flywheel Puller Remover 33mm (Please Carefully Check Sizes In The Listing To Make Sure It's The Correct Product You Need)
  • 【Application Models】:-Compatible with Hon-da CN250 Helix 1986-2007 Yamaha YFZ450 2004-2018 YZF 450 Suzuki GSXR600 & GSXR750 Models Yamaha 08-Up WR250F 4 Stroke Enduro Yamaha 08-Up WR450F 4 Stroke Enduro Polaris Predator 500 03-06 Models.
  • 【Application Models】:Compatible with GSXR 750 2001-2005 GSXR 600 2001-2005 WR 450F 2004 and up GSXR 1000 2001-2005 625 SMC 2006 640 LC4 Adventure 2004-2007 640 LC4E 2001 690 RFR 2008 Outlaw 500 2006-2007 Predator 500 2003-2007
  • 【Superior Quality 】: Made of High Quality Heat Treated Steel Construction,Not The Cheap Steel,Engouh Strong and Durable
  • 【After-sales Guarantee】:Poweka is committed to providing a superior shopping experience on Amazon.com. As such, if you aren't satisfied with your purchase, contact us within 90 days, and we'll help you deal with your problem.
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Poweka_ZY 9.74 Yes Yes Yes

Removing a stuck magneto rotor without damaging your engine components is a nightmare that requires the right precision tool. This Poweka flywheel puller is built specifically to handle that high-torque task for a wide range of machines, from Yamaha YFZ450s to Suzuki GSXR models. Unlike the flimsy alternatives you might find, this tool is forged from heat-treated steel, providing the structural integrity needed to prevent stripping or bending under pressure. Whether you are working on a Honda Helix or a Polaris Predator 500, the M33 x 1.5mm right-hand internal threads provide a secure fit. It is a heavy-duty essential for any mechanic performing enduro or sportbike maintenance who needs a reliable way to pull flywheels safely.

What We Like
Heat treated steel
M33 x 1.5 threads
Right hand internal
Durable construction
Wide vehicle compatibility

QISF 3Pcs Spanner Wrench Magneto Fly Wheel Clutch Hub Adjustable Tool + 24mm&27mm and 20mm&24mm Clutch Lock Nut Spanner Repair Tool for Motorcycle ATV...

QISF 3-Piece Motorcycle Clutch and Flywheel Tool Set

QISF MOTORTOOLBSTT-3PCS 7.70 X 3.00 X 1.20 Inches 1.70 Pounds

PM Score for QISF (PM Score)

7.0 PM Score
Buy on Amazon
  • 【Function】-- 3 In 1 Flywheel tools set. Clutch plate hub nut spanner tool designed to loosen and tighten the lock nut for the removal and installation of a motorcycle clutch.One Used for removal of the flywheel or rotor if applicable. Also come with Flywheel variator clutch spanner wrench.
  • 【Fits】 Flywheel Puller for GY6 50CC 125CC 150CC Honda Suzuki KTM ATV scooter dirt bike. Clutch lock tool for 50cc-125cc Honda Motorcycle ATV Dirt Bike Go Kart Pit Bike 4 Wheeler
  • 【Flywheel puller Size & Material】-- Stator magneto flywheel puller with 2 sizes:24mm&27mm. Magnetic steel
  • 【Clutch lock Size】-- Clutch lock tool Inner Diameter(upper): 20mm. Inner Diameter(under): 24mm. Solid steel material
  • 【Package includes】-- 1×Magneto Flywheel Puller, 1×Clutch lock tool, 1×Flywheel Variator Clutch Spanner Wrench
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
QISF US 9.88 Yes Yes Yes

Your garage floor is covered in grease and your pit bike's engine is half-disassembled because you can't find a way to budge that stubborn clutch lock nut. This QISF toolkit solves that exact headache by providing the specific specialized tools needed for GY6 engines and small-displacement motorcycles. The set includes a magnetic steel flywheel puller in both 24mm and 27mm sizes, alongside a solid steel clutch lock tool that features dual diameters of 20mm and 24mm. Whether you are working on a Honda scooter, a KTM dirt bike, or a custom go-kart, having the variator clutch spanner wrench and the magneto puller in one kit saves you from the frustration of improvised, damaging workarounds. It is a focused, practical collection for anyone performing routine engine maintenance or deep repairs on ATVs and small bikes.

What We Like
Magnetic steel puller
Solid steel construction
Dual diameter clutch lock
Three-piece essential set
Fits GY6 engines

Yuesstloo Engine Flywheel Tools, 2801 Flywheel Holder Flex Plate Lock Tool for BMW N20 N26 Engines, Replace 83302222742

Yuesstloo Engine Flywheel Holder for BMW N20 N26

YUESSTLOO GJ-05-01

PM Score for YUESSTLOO (PM Score)

6.8 PM Score
Buy on Amazon
  • Comes with a 2801 Flywheel Holder, compatible with BMW N20 N26 engines. Similar to BMW factory tool No. 83302222742 to replace.
  • 2801 Flywheel Holder Tool is used to lock the transmission flex plate in place to perform a timing service on the N20 / N26 engine. Easy to remove the timing chain, secure the crankshaft with the transmission installed.
  • Helps to release and tighten down the central bolts on the vibration damper. While replacing the timing chain, this tool can hold the flywheel.
  • Durable: Made of hard duty steel material, high hardness, anti-corrosion, last long time to use.
  • 100% CUSTOMER SATISFACTION GUARANTEE: If you are unhappy for any reason or there is some problem with our products, you can get help from us. Customer satisfaction is our top priority.
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Hangzhou MT-Tools Co., Ltd 9.92 Yes Yes Yes

Why risk damaging your crankshaft during a timing service when a precise locking tool can do the heavy lifting for you? This Yuesstloo flywheel holder is a specialized necessity for anyone tackling N20 or N26 engine maintenance. It functions as a direct replacement for the factory tool, specifically designed to lock the transmission flex plate in place so you can safely remove the timing chain. I found the heavy-duty steel construction particularly impressive, offering the hardness and anti-corrosion resistance needed to handle the high torque required when tightening central vibration damper bolts. Whether you are securing the crankshaft with the transmission installed or performing a complex timing chain replacement, this tool provides the stability required for professional-grade results without the dealership price tag.

What We Like
Hard duty steel
N20 N26 compatible
Locks flex plate
Anti-corrosion finish
Secures crankshaft

Bolaxin Flywheel Locking Tool with 36mm 3/4 Inchs Wench for 6.6L Duramax Engine

Bolaxin Flywheel Locking Tool for Duramax Engines

BOLAXIN BOLAXIN-2020000AA004

PM Score for BOLAXIN (PM Score)

6.6 PM Score
Buy on Amazon
  • Work on Duramax 2500 / 3500 pickups .Remove metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel.
  • Locking the flywheel at the transmission instead of having to remove the starter for water pump replacement.
  • Toothed pieces with screws---Remove the rubber inspection cap on the bottom of the transmission.Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place.
  • Forged 36mm socket---Use on the balancer bolt.Use with a 3/4" square drive wrench
  • Quality tool ---Made of CRV steel with durability, flywheel locking tool is anti-rust and corrosion-resistant
SELLER SELLER SCORE AMAZON FULFILLED PRIME FREE SHIPPING
Antozon 9.78 Yes Yes Yes

You are halfway through a water pump replacement on your Duramax 2500 and realize that pulling the starter is going to be a massive, unnecessary headache. This Bolaxin locking tool changes the math by allowing you to secure the flywheel directly through the transmission inspection plate. By sliding the toothed pieces into the opening and hand-tightening the bolt, you lock the flywheel in place without the heavy lifting. The kit also includes a heavy-duty 36mm forged socket designed for the balancer bolt, which works perfectly with a 3/4 inch square drive wrench. Since it is constructed from CRV steel, the tool feels substantial enough to handle the torque required for these heavy-duty pickups while resisting rust and corrosion during long-term storage in a greasy toolbox.

What We Like
CRV steel construction
Anti-rust finish
Forged 36mm socket
Direct flywheel engagement
Avoids starter removal

Zpfll on Amazon: A Comprehensive Guide

As an online shopper, it's crucial to make informed decisions. This guide looks at Zpfll, a brand that has made its presence felt on Amazon. With its wide range of products in Powersports Tool Sets, Zpfll has become a go-to for many shoppers.

Product Range

Zpfll offers a vast product count of 95 items. This diverse selection caters to a wide array of needs and preferences, making it a versatile brand for consumers.

Quality and Pricing

Quality is a defining factor for any brand. Based on product details and customer ratings, Zpfll's products have an average PM Score of 5.4 out of 10, which lets you compare the lineup at a glance.

Pricing and availability change often. Current prices for each Zpfll product are shown on its Amazon listing — compare them there before you buy.

Customer Service

Customer service is the backbone of any successful online brand. Zpfll is sold by zpfll autopart. Current buyer feedback for each seller is shown on their own Amazon seller profile.

Shopping Experience

The shopping experience on Amazon with Zpfll has been largely positive. The brand's wide range of products, combined with the ease of navigation on Amazon, has made shopping a breeze for many customers.

Delivery and Packaging

Delivery options and packaging details for each item are listed on its Amazon product page — check the current shipping information there before buying.

Conclusion

In conclusion, Zpfll offers a wide range of products at varying price points, making it a brand worth comparing for your next Amazon purchase. Product details, features and customer ratings for the lineup are gathered above.

Overall PM Score

Our PM Score is a 0–10 number computed from two public Amazon signals: the customer star rating and the volume of reviews. Across the Zpfll lineup it averages 5.4 out of 10. See the scoring methodology for the formula.